High-performance liquid chromatography coupled to enzyme-amplified biochemical detection for the analysis of hemoglobin after pre-column biotinylation

The determination of proteins with enzyme-amplified biochemical detection (EA-BCD) coupled on-line with high-performance liquid chromatography (HPLC) is demonstrated. The EA-BCD system was developed to detect biotin-containing compounds. Hemoglobin, which was used as a model compound, was biotinylated prior to sample introduction. Several biotinylation parameters, such as pH and removal of excess biotinylation reagent, were investigated. After biotinylation samples were introduced to HPLC followed by EA-BCD. To the HPLC effluent, alkaline phosphatase label streptavidin (S-AP) was added, which possesses high affinity to biotin and biotin-containing compounds. Excess S-AP was removed by means of an immobilized biotin column followed by substrate addition. The non-fluorescent substrate is converted to a highly fluorescent product by the enzyme label. A detection limit of 2 femtomol biotinylated Hb was achieved with good reproducibility and linearity. However, biotinylation at low analyte concentration suffers from low yield due to slow reaction kinetics. Finally, Hb was successfully extracted from urine with a recovery of 94%.     

Enzyme amplification as detection tool in continuous-flow systems. I. Development of an enzyme-amplified biochemical detection system coupled on-line to flow-injection analysis.

The on-line coupling of flow-injection analysis (FIA) to an enzyme-amplified biochemical detection (EA-BCD) system is described. The aim of this study is the development of a detection system able to detect biotin-containing compounds at low concentration levels. The detection system is based on the interaction of biotin with enzyme-labeled affinity proteins. Biotin possesses a high affinity to both streptavidin and anti-biotin Fab fragments, which are both tested. Several biotin derivatives are available with different reactive probes, which can be used to label analytes of interest. Therefore, biotin acts as a universal probe for the enzyme-amplified biochemical detection. Alkaline phosphatase (AP) was used as enzyme label. Several parameters, such as substrate type and concentration, concentration of enzyme-labeled affinity protein, reaction time and reaction temperature were examined. Biotin aminocaproic acid was used as a model compound. In addition to biotin aminocaproic hydrazide, other biotinylation reagents were also examined. With fluorescence detection of the enzyme-generated product, a mass detection limit of 1 fmol was achieved.     

On-Line HPLC with Biochemical Detection for Screening Bioactive Compounds in Complex Matrixes

On-line high-performance liquid chromatography (HPLC) coupled with biochemical detection (BCD) has been developed to screen compounds showing antioxidant action, enzyme inhibition and receptor affinity in complex matrixes. This review summarizes HPLC methods combining different post-column detection methods, such as diode-array detection (DAD), mass spectrometry (MS), chemiluminescence (CL) and nuclear magnetic resonance, for antioxidant screening. The methods based on a single relatively stable reagent such as DPPH^• and ABTS^•+ were the most popular. Oxygen free radical scavengers mainly depended on post-column CL detection. The on-line hyphenated HPLC–BCD systems based on post-column UV/DAD fluorescence and MS detection were also widely applied to screen enzyme- and receptor-active compounds. These strategies provide a convenient tool for quick identification and quantification of active compounds in complex matrixes.

     

Post-column reaction detection of biotin in human plasma ultrafiltrate based on laser-induced fluorescence energy transfer in the far-red spectral region

High performance liquid chromatography followed by post-column reaction detection in the far-red spectral region provides added sensitivity and selectivity. A homogeneous fluorescence energy transfer assay in the competitive mode based on the binding of biotin and streptavidin was developed as an on-line post-column reaction detection system. The labels used for energy transfer were R-Phycoerythrin conjugated to biotin and Cyanine 5 labeled with streptavidin. The energy transfer peak was measured at 670 nm and excitation was achieved using the 488 nm line of an argon ion laser. The biotin concentration in plasma ultrafiltrate ranged from 0.024 to 6.12 ng/mL (n = 6). The precision of the two controls, 0.24 and 2. 44 ng/mL, was found to be 18.70% and 9.92% relative standard deviation respectively. Accuracy was 10.47% and 1.95% difference from spiked, respectively (n = 6). The limit of detection was 21.70 pg/mL (8.90 x 10(-11)M) calculated based on a factor of 2x the standard deviation of the blank (n = 6). The correlation coefficient for the calibration curve was found to be 0.9995. Recovery from plasma ultrafiltrate at 2.44 ng/mL was 103.40% (n = 6). Detection selectivity was indicated by the absence of background fluorescence in six different plasma samples collected from six individual donors. Endogenous levels were detected in two of the six pools of plasma ultrafiltrates.     

Heterogeneous post-column immunoreaction detection using magnetized beads and a laboratory-constructed electromagnetic separator

The nature of immune reactors allows development of quantitative analytical methods that are highly selective and can often be used directly with complex biological matrixes such as blood, plasma or urine. A major limitation of immunoassay is that antibodies are sometimes unable to discriminate structurally similar species such as drug metabolites and synthetic analogs. The problem associated with the lack of discrimination can be circumvented by coupling immunoassay with liquid chromatography post-column. The most commonly used separation method in post-column immunoreaction detection is the affinity column. Affinity columns may create undesired effects such as a compromise of the chromatographic separation efficiency, the requirement for an antibody with fast reaction kinetics and the need for flushing the column. This paper reports a post-column immunoreaction detection system coupled with a laboratory-constructed on-line magnetic separation flow chamber that is designed to overcome these problems. The system uses disposable magnetic beads as a solid-phase support for separation that can be easily removed from the system. The model analytes chosen for this study were digoxin and its metabolites due to the commercial availability of monoclonal antibodies for these compounds. Digoxin was separated using a chromatographic method prior to being interfaced through a liquid handler system to the immunoreactor. Compatibility of the HPLC mobile phase was determined to be acceptable with a mixing ratio of 1:3 between the LC fraction and immunoreagent solution. The dynamic range of the calibration curve in digoxin-spiked phosphate buffer was found to be 0.25-12 ng/ml and a quadratic fit was found to provide the best fit to the data with a correlation coefficient of 0.9974. The residual error for all standards was less than 15%. The percentage RSDs for the two controls, 2 and 10 ng/ml, were 6.88 and 4.82% (n = 6) and the percentage errors were 7.07 and -6.89% (n = 6), respectively.     

Preconcentration and LC analysis of chlorophenols,using a styrene-divinyl-benzene copolymeric sorbent and photochemical reaction detection

Summary A specific HPLC method has been developed for the trace analysis of lower chlorinated aromatic compounds. The method consists of an on-line preconcentration and a post-column reaction step. On-line preconcentration of mono- and dichlorophenols from aqueous samples has been performed using PRP₁, a divinylbenzene-styrene copolymeric sorbent as packing material for both pre-and analytical column. Enrichment factors of over 300 were obtained compared to regular (100 l) loop injections, even for the highly polar monochlorophenols. After reversed-phase separation, post-column photochemical dechlorination is carried out directly in the eluent stream, using a photochemical reactor. Upon dechlorination, fluorescent products are formed, which can be detected selectively. The resulting fluorescence signal shows a linear response to the quantity of solute present over 2 to 3 orders of magnitude (correlation coefficients: 0.990–0.98). For the mono- and dichlorophenols, the detection limit of the photoconversion method is in the lower nanogram range. The method is especially suitable for the analysis of complex matrices such as effluent water samples or biological fluids containing traces of the polar chloroaromatic compounds together with large amounts of other constituents, which interfere when using more general methods of detection like UV absorption. The potential of this technique for automation has been demonstrated by using a microprocessor-controlled column switching unit.Presented at the 14th International Symposium on Chromatography London, September, 1982     

Specific detection of acetyl-coenzyme A by reversed-phase ion-pair high-performance liquid chromatography with an immobilized enzyme reactor

A selective chromatographic detection system for the determination of acetyl-coenzyme A (CoA) is reported. The short-chain acyl-CoA thioesters were separated by reversed-phase ion-pair high-performance liquid chromatography (HPLC), and then acetyl-CoA was selectively detected on-line with an immobilized enzyme reactor (IMER) as a post-column reactor. Thio-CoA liberated enzymatically from acetyl-CoA was determined spectrophotometrically after reaction with Ellman's reagent in the reagent stream. The IMER with phosphotransacetylase had a substrate specificity sufficient to determine acetyl-CoA and was active and stable in the mobile phase containing methanol and the ion-pair reagent. The calibration graph was linear between 0.2 and 10 nmol, with a detection limit of 0.05 nmol. This HPLC system with detection by IMER allows the selective identification and determination of acetyl-CoA in a mixture of acetoacetyl-CoA and 3-hydroxy-3-methylglutaryl-CoA, which are difficult to separate with ion-pair HPLC.     

Polyphenolic profile characterization of Agrimonia eupatoria L. by HPLC with different detection devices

Liquid chromatography coupled to diode array and electrospray ionization mass spectrometry detection was used to establish the polyphenolic profile of an ethyl acetate fraction from Agrimonia eupatoria L. aqueous-alcoholic extract. Additionally, an HPLC technique with post-column derivatization by p-dimethylaminocinnamaldehyde was employed for the selective detection and quantification of flavan-3-ols. Important information was obtained by combining the data of these two HPLC techniques. Flavan-3-ols (catechin and procyanidins B1, B2, B3, B6, B7, C1, C2 and epicatechin-epicatechin-catechin), quercetin 3-O-glucoside, quercetin 3-O-galactoside, kaempferol 3-O-glucoside, kaempferol 3-O-(6'-O-p-coumaroyl)-glucoside, apigenin 6-C-glucoside and various phenolic acids were identified. Antioxidant activity of the Agrimonia eupatoria L. fraction containing these compounds was assessed through the 1,1-diphenyl-2-picrylhydrazyl, trolox equivalent antioxidant capacity and thiobarbituric acid reactive substances methods. Significant activity was observed for this fraction, where compounds with recognized antiinflammatory properties such as procyanidins, kaempferol 3-O-(6'-O-p-coumaroyl)-glucoside and quercetin glycosides were identified for the first time. These results are predictive of the beneficial effects of this fraction, or some of its compounds, in human health, as possible anti-inflammatory drug.     

Determination of phenyltin compounds by reversed-phase liquid chromatography

An analytical procedure for the determination of phenyltin compounds in environmental sample waters was studied. Chromatography of mono-, di- tri-phenyltin (MPT, DPT and TPT) was performed on a reversed-phase C₁₈ column with the mobile phase comprising methanol/10⁻² M H₃PO₄ (80:20 v/v) at pH 3 and UV detection at 214 nm. To enhance the sensitivity of the detection system, the post-column reaction between morin or 3-hydroxyflavone and phenyltin compounds was formed before fluorescence detection. Several parameters affecting the fluorescence intensity were studied systematically, including the optimum condition for the post-column reagent that was also compatible with the eluent. The parameters concerned in this study were the pH, the percentage of Triton X-100, the ratio of fluorigenic reagent to phenyltin compounds and the amount of methanol in the eluent. Detection limits before the preconcentration process were in the region of 1.5 ppb for TPT and 150–250 ppb for MPT and DPT, respectively. Utilizing solid-phase extraction on a C₁₈ cartridge for sample clean-up as well as preconcentration successfully reduced the detection limit of TPT to the level of ng dm⁻³ and can be applied to seawater analysis. Recovery in the range 95.0–98.0% was obtained by developing the optimum elution profile in the preconcentration step. © 1998 John Wiley & Sons, Ltd.     

An on-line post-column detection system for the detection of reactive-oxygen-species-producing compounds and antioxidants in mixtures

Reactive oxygen species (ROS) can damage proteins, cause lipid peroxidation, and react with DNA, ultimately resulting in harmful effects. Antioxidants constitute one of the defense systems used to neutralize pro-oxidants. Since pro-oxidants and antioxidants are found ubiquitously in nature, pro-and antioxidant effects of individual compounds and of mixtures receive much attention in scientific research. A major bottleneck in these studies, however, is the identification of the individual pro-oxidants and antioxidants in mixtures. Here, we describe the development and validation of an on-line post-column biochemical detection system for ROS-producing compounds and antioxidants in mixtures. Inclusion of cytochrome P450s and cytochrome P450 reductase also permitted the screening of compounds that need bioactivation to exert their ROS-producing properties. This pro-oxidant and antioxidant detection system was integrated on-line with gradient HPLC. The resulting high-resolution screening technology was able to separate mixtures of ROS-producing compounds and antioxidants, allowing each species to be characterized rapidly and sensitively.     

Protein-protein interaction detection in vitro and in cells by proximity biotinylation

We report a new method for detection of protein-protein interactions in vitro and in cells. One protein partner is fused to Escherichia coli biotin ligase (BirA), while the other protein partner is fused to BirA's "acceptor peptide" (AP) substrate. If the two proteins interact, BirA will catalyze site-specific biotinylation of AP, which can be detected by streptavidin staining. To minimize nonspecific signals, we engineered the AP sequence to reduce its intrinsic affinity for BirA. The rapamycin-controlled interaction between FKBP and FRB proteins could be detected in vitro and in cells with a signal to background ratio as high as 28. We also extended the method to imaging of the phosphorylation-dependent interaction between Cdc25C phosphatase and 14-3-3epsilon phosphoserine/threonine binding protein. Protein-protein interaction detection by proximity biotinylation has the advantages of low background, high sensitivity, small AP tag size, and good spatial resolution in cells.     

Increased selectivity in the detection of glycoproteins on nitrocellulose membranes by washing with sodium hydroxide solution.

We increased selectivity in the detection of glycoproteins on nitrocellulose membranes by introducing a washing step using sodium hydroxide solution. Glycoproteins on the nitrocellulose membrane were first oxidized by sodium periodate; biotin hydrazide was then coupled to the aldehyde groups generated in the sugar moiety of the glycoproteins. The membrane was washed twice using sodium hydroxide solution, and avidin-horseradish peroxidase was then coupled to the remaining biotin. This system allows the detection of nanograms of glycoproteins on nitrocellulose membranes, and its specificity allows the clear distinction of glycoproteins from the nonglycosylated protein of bovine serum albumin.     

Micelle formation for improvement of continuous subcritical water extraction of polycyclic aromatic hydrocarbons in soil prior to high-performance liquid chromatography-fluorescence detection

A new method for the extraction-individual separation-determination of polycyclic aromatic hydrocarbons (PAHs) in soil is reported. The method is based on the integration of three steps: continuous subcritical extraction, solid-phase clean-up/preconcentration, and HPLC separation with post-column fluorimetric determination. Sodium dodecyl sulfate (SDS) was added to the water for favouring the extractability of the low-polarity analytes. Soil samples spiked with the target PAHs were subjected to static-dynamic extraction with SDS-water at 50 bar, 150 degrees C, for 15 min of static extraction and 10 min dynamic extraction at a flow-rate of 3 ml/min. Recoveries from 73.6 to 110.4% were obtained in the presence of SDS versus 30 to 80% obtained with water as extractant. The calibration graphs provided by HPLC-fluorimetric detection were run between 0.031 and 0.375 microg/ml for each analyte with regression coefficients between 0.917 and 0.999 and precision, expressed as RSD, between 1.2 and 11.5%. The method was applied to a certified reference material [CRM 524, BCR (Community Bureau of Reference), industrial soil/organic] for validation and the results obtained were in agreement with the certified values.     

A new chemically amplified electrochemical system for the detection of biological affinity reactions: direct and competitive biotin assay

Quantitation of biological affinity reactions by a newly developed chemically amplified electrochemical detection method was demonstrated with the biotin-avidin binding pair. In the method, ruthenium tris(2,2'-bipyridine)(Ru-bipy) was used as an electrochemical signal-generating tag. Its oxidation current on an indium tin oxide (ITO) electrode was amplified with a sacrificial electron donor, oxalate. Because oxalate itself produced negligible current on the electrode, the signal-to-background ratio was greatly enhanced in comparison with other chemical amplification systems. Although the Ru-bipy/oxalate redox couple has been employed previously in electrochemiluminescent and photoelectrochemical detection, its use in a catalytic amperometric detection of biological binding assays has not been reported. To implement the method in the detection of biotin-avidin recognition, avidin was immobilized on an ITO electrode, and was reacted with biotin in solution. Immobilization of avidin by passive adsorption was found to be relatively stable under the condition of the affinity reaction. In the direct assay, biotin labelled with Ru-bipy was recognized by avidin and accumulated on the electrode surface, which was then detected electrochemically in the presence of oxalate. A linear relationship between electrochemical current and biotin concentration was obtained in the range of 1-300 ng mL(-1). In the competitive assay, a mixed solution of unlabelled biotin (the analyte) of various concentrations and 100 ng mL(-1) labelled biotin was reacted with avidin on the surface. As the concentration of the unlabelled biotin increased, less labelled biotin bound to avidin, leading to a reduction in the electro-catalytical response of Ru-bipy. A detection limit of 1 ng mL(-1) biotin was obtained in the competitive assay, which is close to the sensitivity of some enzyme-labelled amperometric assays.     

An enzyme-based E-DNA sensor for sequence-specific detection of femtomolar DNA targets

In this work, we report an enzyme-based E-DNA sensor for the sequence-specific detection of nucleic acids. This DNA sensor employs a "stem-loop" DNA probe dually labeled with biotin and digoxigenin (DIG). The probe is immobilized at an avidin-modified electrode surface via the biotin-avidin bridge, and the DIG serves as an affinity tag for the enzyme binding. In the initial state of the sensor, the probe adopts the stem-loop structure, which shields DIG from being approached by a bulky horseradish peroxidase-linked-anti-DIG antibody (anti-DIG-HRP) due to the steric effect. After hybridization, the probe undergoes a significant conformational change, forcing DIG away from the electrode. As a result, the DIG label becomes accessible by the anti-DIG-HRP, and the target hybridization event can be sensitively transduced via the enzymatically amplified electrochemical current signal. By using this new strategy, we demonstrate that the prototype E-DNA sensor has been able to detect as low as femtomolar DNA targets with excellent differentiation ability for even single mismatches.     

Reversed-phase liquid chromatography coupled on-line to estrogen receptor bioaffinity detection based on fluorescence polarization

We describe the development and validation of a high-resolution screening (HRS) platform which couples gradient reversed-phase high-performance liquid chromatography (RP-HPLC) on-line to estrogen receptor α (ERα) affinity detection using fluorescence polarization (FP). FP, which allows detection at high wavelengths, limits the occurrence of interference from the autofluorescence of test compounds in the bioassay. A fluorescein-labeled estradiol derivative (E2-F) was synthesized and a binding assay was optimized in platereader format. After subsequent optimization in flow-injection analysis (FIA) mode, the optimized parameters were translated to the on-line HRS bioassay. Proof of principle was demonstrated by separating a mixture of five compounds known to be estrogenic (17β-estradiol, 17α-ethinylestradiol and the phytoestrogens coumestrol, coumarol and zearalenone), followed by post-column bioaffinity screening of the individual affinities for ERα. Using the HRS-based FP setup, we were able to screen affinities of off-line-generated metabolites of zearalenone for ERα. It is concluded that the on-line FP-based bioassay can be used to screen for the affinity of compounds without the disturbing occurrence of autofluorescence.     

Design and application of a post-column extraction system compatible with miniaturized liquid chromatography

An on-line, post-column, extraction system suitable for use with miniaturized HPLC (0.7–1 mm i.d. columns) is described. The system consists of a 30° angle segmenting tee, a PTFE extraction coil of variable length and a membrane phase separator. The internal volume of the phase separator is less than 1 l. The total variance contribution of the system is between 1 and 6 sec².The determination of the anti-cancer drugs VP 16 and VM 26 in urine by means of reversed-phase HPLC and fluorescence detection, using both on-column preconcentration and the present miniaturized post-column extraction system is presented as an application.     

Analysis of anthraquinones in Rubia tinctorum L. by liquid chromatography coupled with diode-array UV and mass spectrometric detection

A liquid chromatographic (LC) method for the separation of both anthraquinone glycosides and aglycones in extracts of Rubia tinctorum was improved. For on-line MS detection atmospheric pressure chemical ionisation as well as electrospray ionisation (ESI) were used. The glycosides were ionised in both positive and negative ionisation (NI) mode, the aglycones only in the NI mode. With ESI ammonia was added to the eluent post-column to deprotonate the compounds. The efficiency of mass detection of the hydroxyanthraquinone aglycones was found to depend on the pKa value of the component. LC-diode-array detection and LC-MS provide useful complementary information for the identification of anthraquinones in plant extracts, which was proven with the identification of munjistin and pseudopurpurin.     

Determination of aflatoxin B1 in cereals by homogeneous liquid-liquid extraction coupled to high performance liquid chromatography-fluorescence detection

A simple and rapid method based on homogeneous liquid-liquid extraction coupled to HPLC with fluorescence detection was developed for the determination of aflatoxin B1 (AFB1) in the rice and grain samples after post-column derivatization. The proposed method eliminated the use of immunoaffinity columns for clean-up in the determination of AFB1. The parameters affecting recovery and preconcentration such as type and volume of organic solvent, volume ratio of water/methanol, concentration of phase separator reagent and extraction time were optimized. Under the optimized conditions, the calibration graph was linear in the concentration range of 0.01-1.0 ng/g with the detection limit of 0.003 ng/g. This method was successfully applied for the analysis of AFB1 in different cereal samples.     

Immobilized urokinase column as part of a specific detection system for plasminogen species separated by high-performance affinity chromatography

Immobilized urokinase was used as part of a post-column reactor for the specific detection of human plasminogen species which were fractionated using a high-performance affinity column. After on-line activation of each peak, plasmin activity was measured by mixing the eluate with a specific fluorogenic substrate and the product was detected by a fluorescence monitor. This detection system gave linear calibration graphs for both purified plasminogens (0.1-50 micrograms) and plasminogens contained in plasma (25-100 microliters). Relative standard deviations for the determination of plasminogens in plasma were 6.1-6.6% (n = 12), showing good reproducibility. The detection limit was as low as 0.1 micrograms of plasminogen. Immobilized urokinase was very stable and no appreciable decrease in activity was found after 100 cycles of operation. In combination with an immobilized benzamidine column, this system made it possible to separate and detect Glu-plasminogen and Lys-plasminogen contained in human plasma samples as small as 100 microliters without any pretreatment.