Self‐assembly of star‐shaped polystyrene‐block‐polypeptide copolymers synthesized by the combination of atom transfer radical polymerization and ring‐opening living polymerization of α‐amino acid‐N‐carboxyanhydrides

The self‐assembling nature and phase‐transition behavior of a novel class of triarm, star‐shaped polymer–peptide block copolymers synthesized by the combination of atom transfer radical polymerization and living ring‐opening polymerization of α‐amino acid‐N‐carboxyanhydride are demonstrated. The two‐step synthesis strategy adopted here allows incorporating polypeptides into the usual synthetic polymers via an amido–amidate nickelacycle intermediate, which is used as the macroinitiator for the growth of poly(γ‐benzyl‐L ‐glutamate). The characterization data are reported from analyses using gel permeation chromatography and infrared, ¹H NMR, and ¹³C NMR spectroscopy. This synthetic scheme grants a facile way to prepare a wide range of polymer–peptide architectures with perfect microstructure control, preventing the formation of homopolypeptide contaminants. Studies regarding the supramolecular organization and phase‐transition behavior of this class of polymer‐block‐polypeptide copolymers have been accomplished with X‐ray diffraction, infrared spectroscopy, and thermal analyses. The conformational change of the peptide segment in the block copolymer has been investigated with variable‐temperature infrared spectroscopy. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2774–2783, 2006     

Phase transition of layer structure of poly(p-benzenedithiol-co-p-diethynylbenzene) by heat or photon mode

Phase transition of the layer structure of poly(p-benzenedithiol-co-p-diethylbenzene) obtained in solid state polymerization was studied by a thermal treatment or UV irradiation under a nitrogen atmosphere. The peak intensities in the X-ray diffraction diagram of polymers gradually decreased with the thermal treatment time above 55°C. Below 50°C the layer structure of polymers hardly changed. The apparent activation energy for the phase transition was about 15 Kcal/mol [63 KJ/mol] at the initial stage and gradually decreased to a few Kcal/mol [ca. 2 KJ/mol]. UV light from a high-pressure mercury lamp also gradually induced the phase transition from the layer structure to an amorphous one. The pristine polymer possesses phase transition points at 75, 95 and 130°C. The exothermic transition at 75°C can be understood as the thermal destruction of the semistable layer structure. The exothermic transition at 95°C may be correspond to the cis → trans thermal isomerization of the C?°C bond in the polymer main chain. The diffuse reflectance spectrum of the pristine polymer differed from that of the amorphous polymer obtained by the thermal treatment of the pristine polymer. SEM photographs of the pristine polymer showed a particular surface structure, i.e. entangled fibrous material. TEM photographs of the pristine polymer exhibited a bright valley-and-hill structure, whereas that of the amorphous polymer obtained by thermal treatment exhibited a plain surface.     

Influence of additives on recycled polymer blends

Polymer systems based on polymer waste offer promising way to increase recycling in the society. Since fillers play a major role in determining the properties and behavior of polymer composites, recycled polymers can also be combined with fillers to enhance the stiffness and thermal stability. In this study, blends of recycled polyethylene and recycled polypropylene with mica and glass fiber were prepared by melt blending technique. The effect of the particle loading, filler type, and filler–matrix interaction on thermal degradation and thermal transition of processed systems were investigated. Thermogravimetric analysis, differential thermogravimetric analysis, and differential scanning calorimetry were used in this investigation. Comparative analysis shows that both fillers produced different effects on thermal properties of the processed systems. These results were confirmed by calculating the activation energy for thermal degradation and thermal transition using Kissinger and Flynn–Wall expressions.     

Nature of the first exothermic peak on the DSC curve of linear polydicyclopentadiene obtained with a special catalytic system

A DSC and TGA study of linear polydicyclopentadiene (L-PDCPD) shows that the thermal behaviour of this polymer is characterized by an endothermic and two exothermic processes. In previous work it was demonstrated that the endothermic process is a glass transition and the second exotherm represents the thermo-oxidation of the polymer. In this work the first exothermic process is shown to be a possible thermal polymerization of the double bonds in the polymer chains.     

Determination of thermal expansion coefficient of a monofilament polyamide fiber using digital image correlation

Coiled polymer actuators are a type of artificial muscles that are a promising development in the field of smart materials. The coefficient of thermal expansion of monofilament polyamide fibers is a crucial parameter for understanding the actuation of coiled fibers. The main purpose of this work is to develop a new methodology for estimating the coefficient of thermal expansion and the transition temperature of monofilament polymer fibers. In the experimental procedure, axial deformations of monofilament polyamide fiber samples were induced by temperature variations using a controlled thermal system. These deformations were determined from images of polyamide samples using the digital image correlation method. Two different approaches based on distinct temperature conditions were conducted. An alternative model with three parameters, including the coefficient of thermal expansion, was introduced to describe the thermal-mechanical behavior of monofilament polyamide fibers. Moreover, polyamide samples were also characterized using four conventional methodologies. Results indicated that the coefficient of thermal expansion changed of a modest negative value to a large negative value and this transition occurred around the glass transition temperature of the polyamide. The thermal expansion curves demonstrate good repeatability and all estimated parameters were in accordance with literature, indicating that the proposed approach can be suitable for the proposed study. This investigation may help in understanding of the intrinsic thermal-mechanical behavior of polymeric monofilaments employed as actuators.     

Spectrophotometric determination of thermal transition of polymeric systems using photochromic probes

Mercury-dithizone complex both free and bonded to a polymeric system has been synthesized and used to measure the thermal transition of polystyrene, poly(vinyl acetate), and some other polymers. The thermal relaxation rate of the activated complex in dark has been found to be dependent on the free volume of a polymer matrix. The rate goes through a maximum above T_g of a polymer. A very sensitive method, based on thermal recovery of activated photochromic probe chromophore has been devised to measure the thermal transition of both single and multicomponent polymer matrices. © 1995 John Wiley & Sons, Inc.     

Structure and mesophase of a new series of aromatic polyesters

A new series of aromatic polyesters in which the polymethylene flexible spacers are connected with the rigid main chain containing benzene ring were prepared by interfacial polycondensation. The polymers were characterized by hotstage polarized microscopy, differential scanning calorimetry, wide-angle X-ray diffraction and Fourier-transform infrared spectroscopy. The structure and properties of polyesters were investigated. The results showed that the textures of the thermotropic liquid-crystalline polyesters are smectic and/or nematic. The dependence of melting point, clearing point and transition enthalpy of polyesters on length of the alkylene group revealed a regular zig-zag trend. The thermal analysis of polyesters revealed that the clearing transition is an equilibrium process, so the entropy of this transition may be taken as an indication of the degree of the order in mesomorphic state presented in the system. Furthermore, the thermal history of polymer had a significant effect on its thermal behavior. The regular arrangement of methylene segments changed when polymer melted from the crystal state to the liquid-crystalline state. The research also implicated that the conformational change of the methylene flexible spacer was one of the reasons for this thermal effect.     

Polyurethane/polystyrene one-shot interpenetrating polymer networks with good damping ability: Transition broadening through crosslinking,internetwork grafting and compatibilization

Good damping materials should exhibit a high loss factor value over a broad temperature range. Polyurethane and polystyrene are highly immiscible polymers with glass transition regions far apart. The interpenetrating polymer network topology can restrict phase separation and result in materials with a broad transition region. Simultaneous polyurethane/polystyrene interpenetrating polymer networks were synthesized by the one-shot route. Different methods of improving the miscibility of the two polymers were investigated. These included the vanation of the crosslink level in both polymer networks, the controlled introduction of internetwork grafting and the incorporation of compatibilizers into the polystyrene network. Dynamic mechanical thermal analysis indicated that the latter two were successful in achieving a compatibilization of the polymer components. With some materials, a high, broad transition region exhibiting a loss factor > 0.3 over more than 135°C was obtained. The morphology observed via transmission electron microscopy ranged from macrophase separated materials in the lightly crosslinked IPNs to a fine, microheterogeneous morphology in the grafted ones. Modulated differential scanning calorimetry measurements confirmed the trend of the glass transition locations observed with dynamic mechanical thermal analysis.     

An investigation of the smectic-isotropic transition in a side-chain liquid crystal polymer by synchrotron radiation x-ray diffraction

In this work we have used synchrotron x-radiation diffraction to follow in real-time the isotropic-smoetic phase transition of a side-chain liquid crystalline polymer. The analysis of the x-ray data indicated that the transition occurs within a very narrow biphasic region. As the transition takes place, the size of the smectic regions, as indicated by the width of the diffraction peaks, changed only very slightly before impingement, suggesting a two-dimensional growth pattern. A thermal investigation of the polymer paralleling the x-ray experiments was undertaken and a kinetic analysis applied to the resulting data. Qualitative agreement with a disk-like growth of the smectic regions was found. We have shown that the overall kinetics of the isotropic-smectic transition of a side-chain polymer can be studied by x-ray diffraction permitting the evaluation of several structural parameters. © 1993 John Wiley & Sons, Inc.     

新型光取向液晶聚合物的制备及其性能表征

目前,液晶分子常规的定向方法是对涂有定向膜的基片进行摩擦,这种方法简单、方便,然而在摩擦过程中却难以避免产生机械划痕、污染或静电,影响了液晶分子取向的均匀性,光控取向方法是近年来发展起来的一种液晶定向新技术,即通过激光或偏振紫外光照射,引发基片上的聚合物薄膜发生光致聚合、光致异构或光致分解反应,产生表面的各向异性,进而诱导液晶分子取向。     

Structural changes in glassy polymers studied by thermal analysis and dynamic mechanical tests

Structural changes which take place in many amorphous polymers, when they are annealed at temperatures near the glass transition temperature, have important theoretical, physical, and mechanical consequences. In this paper the possible existence of some local ordering in highlycrosslinked epoxy resins is studied. Three kinds of tests—TMA, DSC, and dynamic experiments—are used for a type of epoxy resin, cured with six different amounts of curing agent. In order to study the effect of the thermal history on the behavior of the polymer at its transition region, as well as the morphology of the materials tested, three different thermal treatments have been followed. Interesting results were derived concerning the influence of these parameters to these parameters to the mechanical characterization of the polymer.     

Synthesis of new thermosetting poly(2,6‐dimethyl‐1,4‐phenylene oxide)s containing epoxide pendant groups

A new class of thermosetting poly(2,6‐dimethyl‐1,4‐phenylene oxide)s containing pendant epoxide groups were synthesized and characterized. These new epoxy polymers were prepared through the bromination of poly(2,6‐dimethyl‐1,4‐phenylene oxide) in halogenated aromatic hydrocarbons followed by a Wittig reaction to yield vinyl‐substituted polymer derivatives. The treatment of the vinyl‐substituted polymers with m‐chloroperbenzoic acid led to the formation of epoxidized poly(2,6‐dimethyl‐1,4‐phenylene oxide) with variable pendant ratios, and the structures and properties were studied with nuclear magnetic resonance spectroscopy, Fourier transform infrared spectroscopy, differential scanning calorimetry, thermogravimetric analysis, and gel permeation chromatography. The ratios of pendant functional groups were tailored for the polymer properties, and the results showed that the glass‐transition temperatures increased as the benzylic protons were replaced by bromo‐, vinyl‐, or epoxide‐functional groups, whereas the thermal stability decreased in comparison with the original polymer. Within a molar fraction of 20–50%, the degree of functionalization had little effect on the glass‐transition temperature; however, it correlated inversely with the thermal stability of each functionalized polymer. The thermal curing behavior of the epoxide‐functionalized polymer was enhanced by the increment of the pendant functionality, which resulted in a significant increase in the glass‐transition temperature as well as the thermal stability after the curing reaction. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5875–5886, 2006     

Molecular dynamics simulation study of glass transition in hydrated Nafion

The thermal transition of Nafion is studied using a molecular dynamics simulation through a chemically realistic model. Static and dynamic properties of polymer melts with different water contents are investigated over a wide range of temperatures to obtain viscometric and calorimetric glass transition temperatures. The effect of cooling rate of the simulation on the glass transition of the hydrated polymer is also examined within the well‐known Williams–Landel–Ferry (WLF) equation. Variation of relaxation times versus temperature shows a fragile‐to‐strong transition. The hydration level has a significant impact on the static and dynamic properties of the polymer chains and water molecules confined in nanometric spaces between polymer chains. The results of this study are useful to predict the behavior of Nafion for various applications including fuel cells, sensors, actuators, and shape memory devices at different temperatures. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 907–915     

Polymer-anchoring Schiff base ligands and their metal complexes: Investigation of their electrochemical,photoluminescence, thermal and catalytic properties

In this study, we prepared three polymer-anchored Schiff base ligands and their Cu(II), Co(II) and Ni(II) transition metal complexes. For this purpose, we synthesized three Schiff base ligands from the reaction of 2,4-dihydroxybenzaldehyde with diamines in the ethanol solution and characterized by the analytical and spectroscopic methods. We investigated the electrochemical and photophysical properties of the free Schiff base ligands in different solvents and concentrations. In the electrochemical studies, we found that the ligands show the reversible and irreversible redox processes. In order to obtain the polymer-anchored ligands, we used Merrifield’s peptide resin (PS) as solid support. The surface morphologies of the polymer anchored Schiff base ligands were done with the scanning electron microscopy (SEM). We did alkene epoxidation and alkane oxidation reactions of the metal complexes and used the cyclohexene, styrene, cyclohexane and cyclooctane as the substrate and they show the low catalytic activity. The metal complexes have no selectivity in the oxidation reactions. The polymer anchored Schiff base ligands and their metal complexes have high thermal stability at the higher temperatures.     

Studies on surface molecular motion of oligomeric polystyrene by differential scanning calorimetry

There are many studies on the surface molecular motion of polymer films [ 1 ], but no report on surface thermal properties of polymer because of experimental difficulties. The thermal property of oligomeric polystyrene (PS) was investigated by differential scanning calorimetry (DSC) in the present study. In order to increase the ratio of surface area to volume of PS particles, the DSC samples were prepared by mechanically grinding mixtures of PS and Al₂O₃ powders. The grinding mixtures of these powders with low particle size showed a transition at a low temperature of 14–17 °C (much lower than the bulk glass transition temperature, T_g), and this low‐temperature transition was dependent on the size of PS particles. This transition seems to result from the surface molecular motion of the activated surface layer of PS. Copyright © 2000 John Wiley & Sons, Ltd.     

Miscible blends through hydrogen bonding: effects on polymer properties

Miscible blends through hydrogen bonding have been intensively studied. The effects of a variety of miscible hydrogen bonded polymer blends on properties such as thermal and thermal oxidative stability, moisture sensitivity, modulus and glass transition temperature are discussed. In addition, the preparation of semi-interpenetrating polymer networks (IPNs) and studies of the effect of crosslinking on the miscibility in hydrogen bonded polymer blends are reviewed.     

Engineering a sharp physiological transition state for poly(n‐isopropylacrylamide) through structural control

Poly(N‐isopropylacrylamide) (pNIPAAm), a well‐studied, biologically inert polymer that undergoes a sharp aqueous thermal transition at 32 °C, has been a subject of widespread interest for possible biological applications. A major hindrance to its successful application is due to the difficulty of maintaining a sharp transition when the polymer is modified for a physiological transition temperature, especially in isotonic solutions. Current copolymer blends raise the transition temperature but also make the transition significantly broader. We have combined the use of reversible addition‐fragmentation chain transfer (RAFT) polymerization with tacticity control to synthesize well‐defined pNIPAAm that demonstrates sharp transitions under physiological conditions. By selecting a RAFT agent with appropriate end groups, controlling molecular weight, and increasing the racemo diad content, we were able to increase the thermal transition temperature of pure pNIPAAm to a sharp transition at 37.6 °C under isotonic conditions. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Mecanisme d'ignifugation d'elastomeres organosiliciques par le platine

The role of platinum and of some mineral oxides in improving the thermal stability of a silicone rubber has been studied by temperature-programmed thermogravimetric analysis and by isothermal pyrolysis. Platinum has no significant influence on the scission of side chains. It limits the rupture of the polymer backbone by preventing the formation of a transition complex involved in silicone degradation. Mineral oxides combine with certain products of the thermal decomposition of the polymer.     

Synthesis and properties of a new polydiacetylene: Poly[1,6-di(N-carbazolyl)-2,4-hexadiyne]

The solid-state synthesis and properties are reported for a new polydiacetylene: poly[1,6-di(N-carbazolyl)-2,4-hexadiyne]. The monomer crystals polymerize quantitatively with γ irradiation or thermal annealing. An Autocatalytic effect is observed in both γ-ray polymerization and thermal polymerization and is attributed to an increase in chain propagation length at about 5% conversion. The activation energy for thermal polymerization is about 25 kcal/mole, independent of the degree of conversion to polymer. The exceptional thermal stability of the polymer crystals allowed a thermomechanical analysis over a large temperature range, ?50 to 300°C. With increasing temperature, the polymer contracts in the chain direction linearly with temperature over the entire range, yielding a thermal expansion coefficient of (?2.32 ± 0.02) × 10^?5°C^?1. Photoconductivity action spectra are reported for the polymer crystals. The energies for the photoconductivity onset (ca. 2.3 eV) and for the lowest energy optical transition (1.89 eV) are the lowest reported for the polydiacetylenes. The photoconduction onset is blue-shifted with respect to optical absorption—a result which is consistent with the excitonic assignment for the lowest energy optical transition in the polydiacetylenes.     

Relaxation of polymer thin films in isothermal temperature‐jump measurements

The dynamic behavior of thin polymer films is of interest in the fabrication of microelectronics and optoelectronics and in the coatings industry. It is known that polymer relaxation is affected by film thickness and the particular substrate/polymer pair. We previously used a spectroscopic ellipsometer to investigate the glass transition in thin films. In addition to information on the modification of thermal transitions such as the glass‐transition temperature, the speed of data acquisition in an automated, spectroscopic ellipsometer, operated at a single wavelength of 780 nm, allows for the direct observation of the isothermal dimensions of a thin polymer film as a function of time after a rapid temperature change. In this article, we discuss recent results from the observation of the time dependence of film‐normal thickness and normalized, in‐plane, lateral dimension as well as simple fits to this relaxation behavior in terms of a normalized viscosity and relaxation time. The results support a highly asymmetric initial thermal expansion normal to the film followed by close to isotropic relaxation and anisotropic “flow” (the flow in response to the vanishingly small shears of thermal expansion). These features may clarify issues involving the observation of chain confinement in thin polymer films in terms of potential differences between equilibrium and dynamic measurements. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 2929–2936, 2000