Self-assembly of 10-microm-sized objects into ordered three-dimensional arrays

This paper describes the self-assembly of small objects--polyhedral metal plates with largest dimensions of 10 to 30 microm--into highly ordered, three-dimensional arrays. The plates were fabricated using photolithography and electrodeposition techniques, and the faces of the plates were functionalized to be hydrophobic or hydrophilic using self-assembled monolayers (SAMs). Self-assembly occurs in water through capillary interactions between thin films of a hydrophobic liquid (a liquid prepolymer adhesive) coated onto the hydrophobic faces of the plates; coalescence of the adhesive films reduces the interfacial free energy of the system and drives self-assembly. By altering the size and surface-patterning of the plates, the external morphologies of the aggregates were varied. Curing the adhesive furnished mechanically stable aggregates that were characterized by scanning electron microscopy (SEM). For assemblies formed by plates partially composed of a sacrificial material, a subsequent etching step furnished fully open, three-dimensional microstructures. This work validates the use of capillary interactions for three-dimensional mesoscale self-assembly in the 10-microm-size regime and opens new avenues for the fabrication of complex, three-dimensional microscructures.     

Magnetic field induced assembly of highly ordered two-dimensional particle arrays

Suspended magnetic beads are exposed to an external homogeneous magnetic field which rotates around the axis perpendicular to the field direction. Because of dipolar interactions, magnetic beads assemble in highly ordered two-dimensional hexagonal arrays perpendicular to the rotation axis. By continuous provision of the particle concentration, the growth modes of two-dimensional particle clusters and monolayers are observed. The structure of the resulting assembled objects is analyzed for different field frequencies and particle concentrations. We identify dynamic processes which enhance stability and reduce lattice distortions and, thus, allow for the application of these particle agglomerations as dynamic components in lab-on-a-chip technologies.     

Assembly of highly ordered 2D arrays of silver-PNIPAM hybrid microgels

A strategy was developed for the synthesis of highly ordered 2D arrays of Ag-PNIPAM hybrid microgel.The highly ordered 2D arrays of PNIPAM microgel were prepared by dispersing PNIPAM microgel on a charge-reversible substrate.The microgel spheres self-assembled into a 3D colloidal crystal,and the first 111 plane was fixed in situ onto the substrate as a result of spontaneous charge reversal of the substrate,leaving a high-quality 2D array of PNIPAM microgel.Ag nanoparticles were then synthesized in situ inside the microgel spheres by introduction of Ag+ ions into the microgel spheres and reduction with sodium borohydride.The resulting 2D arrays are highly ordered.The inter-particle distance in the array can be tuned.In addition,the method allows the synthesis of large size arrays and the use of nonplanar substrate.     

Electrodeposited fabrication of highly ordered Pd nanowire arrays for alcohol electrooxidation

Highly ordered Pd nanowire arrays (NWAs) are prepared using a porous aluminum oxide template by pulse electrodeposition. The obtained Pd nanowire arrays with the diameter of 50 nm and length of 850 nm have been characterized by scanning electron microscopy, energy dispersive X-ray analysis, and high resolution transmission electron microscope. Meanwhile, the electrocatalytic activity of Pd NWAs electrodes for methanol and isopropanol oxidation in alkaline media is studied. It is found that the obtained nanostructures exhibit excellent catalytic activity for alcohol electrooxidation. The isopropanol oxidation shows the higher activity on Pd NWAs electrode than methanol in alkaline medium.     

Fabrication of highly ordered TiO2 nanotube arrays using an organic electrolyte

Anodization of titanium in a fluorinated dimethyl sulfoxide (DMSO) and ethanol mixture electrolyte is investigated. The prepared anodic film has a highly ordered nanotube-array surface architecture. Using a 20 V anodization potential (vs Pt) nanotube arrays having an inner diameter of 60 nm and 40 nm wall thickness are formed. The overall length of the nanotube arrays is controlled by the duration of the anodization, with nanotubes appearing only after approximately 48 h; a 72 h anodization results in a nanotube array approximately 2.3 mum in length. The photoelectrochemical response of the nanotube-array photoelectrodes is studied using a 1 M KOH solution under both UV and visible (AM 1.5) illumination. Enhanced photocurrent density is observed for samples obtained in the organic electrolyte, with an UV photoconversion efficiency of 10.7%.     

Self-assembly of poly(9,9'-dihexylfluorene) to form highly ordered isoporous films via blending

Highly ordered hexagonal arrays of isoporous films prepared from poly(9,9'-dihexylfluorene) and polystyrene-grafted silica nanoparticles (Si-graft-PS) are presented. These close-packed arrays were formed in areas of many square millimeters. The pore size varied from 3.6 to 8.5 microm, depending on the concentration of Si-graft-PS and the processing conditions. Solid-state photoluminescence resulted in a significant red shift of up to 30 nm in these films compared to that in conventional processing techniques. These differences are attributed to enhanced aggregation of the polymers caused by polymer-solvent interactions. These highly ordered polymer films may find use in microelectronic and biological and/or chemical sensor applications.     

Using alpha-helical coiled-coils to design nanostructured metalloporphyrin arrays

We have developed a computational design strategy based on the alpha-helical coiled-coil to generate modular peptide motifs capable of assembling into metalloporphyrin arrays of varying lengths. The current study highlights the extension of a two-metalloporphyrin array to a four-metalloporphyrin array through the incorporation of a coiled-coil repeat unit. Molecular dynamics simulations demonstrate that the initial design evolves rapidly to a stable structure with a small rmsd compared to the original model. Biophysical characterization reveals elongated proteins of the desired length, correct cofactor stoichiometry, and cofactor specificity. The successful extension of the two-porphyrin array demonstrates how this methodology serves as a foundation to create linear assemblies of organized electrically and optically responsive cofactors.     

Flexible fiber-type dye-sensitized solar cells based on highly ordered TiO2 nanotube arrays

A double-sided, transparent conducting and flexible dye-sensitized solar cell (DSSC) was developed. The device comprised two metal electrodes whereby the working electrode consisted of highly ordered titania (TiO₂) nanotube arrays. The maximum conversion efficiency of the DSSC was 5.1% and decreased by 6% under a 90° bending. Surface treatment of the TiO₂ nanotube arrays in niobium isopropoxide solution lifted the conversion efficiency to 6.8%.     

多肽自组装技术及其在生物医学上的应用

多肽分子自组装广泛存在于自然界中。多肽具有良好的生物相容性和可调控的降解性能,并且利用多肽自组装技术,可以在分子水平上设计并调控聚集态的形状和结构,这在生物医学材料方面具有巨大的应用潜力。近年来关于多肽自组装的研究成为材料学、医学等领域中研究热点之一,并且在药物缓释载体、组织工程支架研究方面取得进展。本文介绍多肽分子自组装技术的概念,综述了多肽自组装技术在药物缓释载体材料、组织工程支架材料方面的应用。     

Synthesis and characterization of highly ordered BiFeO3 multiferroic nanowire arrays

We report the synthesis and characterization of multiferroic BiFeO₃ (BFO) nanowires. The perovskite BFO nanowires with diameters about 60 nm and lengths about 10 μm were fabricated by means of the sol-gel method utilizing nanochannel alumina templates with post annealing at 700 °C. The microstructure of the BFO nanowires was investigated by means of x-ray diffraction and transmission electron microscopy, and the ferroelectric characteristic of BFO nanowires were demonstrated.     

Anodic growth of highly ordered TiO2 nanotube arrays to 134 microm in length

Described is the fabrication of self-aligned highly ordered TiO(2) nanotube arrays by potentiostatic anodization of Ti foil having lengths up to 134 mum, representing well over an order of magnitude increase in length thus far reported. We have achieved the very long nanotube arrays in fluoride ion containing baths in combination with a variety of nonaqueous organic polar electrolytes including dimethyl sulfoxide, formamide, ethylene glycol, and N-methylformamide. Depending on the anodization voltage, pore diameters of the resulting nanotube arrays range from 20 to 150 nm. Our longest nanotube arrays yield a roughness factor of 4750 and length-to-width (outer diameter) aspect ratio of approximately 835. The as-prepared nanotubes are amorphous but crystallize with annealing at elevated temperatures. In initial measurements, 45 mum long nanotube-array samples, 550 degrees C annealed, under UV illumination show a remarkable water photoelectrolysis photoconversion efficiency of 16.25%.     

Peptide amphiphile nanofibers template and catalyze silica nanotube formation

Hollow silica nanotubes with tunable dimensions have been synthesized by condensation of tetraethoxysilane (TEOS) on peptide-amphiphile nanofiber templates followed by calcination. Peptide-amphiphile nanofibers direct silica mineralization by providing nucleation sites and catalyze silica polymerization at their surface. The catalytic activities of peptide-amphiphiles containing lysine, histidine, or glutamic acid were compared and only peptide amphiphiles containing lysine or histidine were found to be good catalytic templates. Depending on the reaction conditions, and the size of the PA assembler, the nanotube wall thickness could be varied between 5 and 9 nm.     

Photocatalytic decompositions of gaseous HCHO and methylene blue with highly ordered TiO_2 nanotube arrays

The highly ordered Ti O_2nanotubes(NTs) were fabricated by the anodic oxidation method.Their morphology,structure and crystalline phase were characterized by scanning electron microscopy(SEM) and X-ray diffractometer(XRD).The effects of morphology,specific surface area,pore structures and photocatalytic activity of the Ti O_2 NTs were investigated.UV–vis spectra analysis showed that its light absorption had been extended to the visible light range.The photocatalytic activity of the as-prepared samples was evaluated by photocatalytic oxidation of gaseous HCHO and MB aqueous solution.The samples had better adhesion strength in the dark and showed a higher photocatalytic activity than nanoparticles.Especially,with ultraviolet light pretreatment,the nanotubes exhibited more stable active for photocatalytic decomposition and the photodecomposition rate remained at high level after 3 cycles of the photocatalysis experiment.Thus,how the number of surface active group ·OH increased and the mechanism for the great improvement for the photocatalytic activity are discussed.     

One-step nanocasting synthesis of highly ordered single crystalline indium oxide nanowire arrays from mesostructured frameworks

A one-step nanocasting route has been demonstrated to prepare highly ordered single-crystal indium oxide nanowire (IONW) arrays with mesostructured frameworks. Unlike the reported multistep nanocasting process (synthesis of mesoporous materials, and then incorporation of precursors and formation of inorganic frameworks), a highly ordered mesostructured surfactant-silica monolith with low external surface serves as both the template and the reducing agent and makes the formation of single-crystal IONWs in its channels easily in one step by using normal In(NO(3))(3) as an inorganic precursor. After silica is removed, highly ordered uniform single-crystal IONW arrays with hexagonal (p6mm) or cubic (Ia3d) mesostructures are derived. These new materials are studied by XRD, SEM, TEM, N(2) adsoption, and UV spectrum. Furthermore, this one-step nanocasting synthesis route is a generalized method and can be used to synthesized a highly ordered mesoporous silica monolith with metal oxide nanocrystals in its channels. To the best of our knowledge, this is the first report of a single crystalline mesostructured In(2)O(3) framework.     

Self-assembly of a peptide amphiphile based on hydrolysed Bombyx mori silk fibroin

An octapeptide, GAGAGAGY, was obtained by a novel method, i.e. hydrolysing Bombyx mori silk fibroin. Afterward, a dodecanoic acid-peptide conjugation was synthesized. This amphiphile assembled into cylindrical nanofibers of planar β-sheets at pH 9 and twisted β-sheets at pH 4.     

Evaluation of asphaltene degradation on highly ordered TiO2 nanotubular arrays via variations in wettability

Photocatalytic degradation of both aquatic and atmospheric organic pollutants on titanium dioxide has been extensively investigated in the past decades, but research on direct photocatalytic degradation of solid-phase organic pollutants is rather limited. In this work, photocatalytic degradation of n-C(7) asphaltene, which is composed of solid-phase organic substances found in crude oil, on highly ordered TiO(2) nanotubular arrays (TNAs) was studied using the wettability as an indicator. It was observed that the water contact angle rose linearly with increasing the concentration of n-C(7) asphaltene solution up to 0.02 g mL(-1). Further increasing the concentration of n-C(7) asphaltene only caused small augment in the contact angle, which eventually became stable around 98°. It is demonstrated that the water contact angle can be used as an indicator to reflect the residual solid-phase organic pollutants within a certain range of pollutant concentration. As observed, n-C(7) asphaltene film degraded on TNAs under UV illumination for 60 min, showing complete mineralization of ～80% of n-C(7) asphaltene that was released into air finally. The remaining 20% of asphaltene was partially decomposed into smaller organic molecules, e.g., -C(═O)- and -C(═O)-OH, confirmed by high-resolution X-ray photoelectron spectra analysis. TNAs can be reused to degrade the solid-phase n-C(7) asphaltene for a number of cycles without further treatment.     

两亲性多肽自组装及其应用

两亲性多肽分子具有类似天然磷脂分子的两亲特性、丰富的分子结构、独特新颖的组装体结构以及特殊的生物学功能,是多肽自组装研究的热点领域.本文总结了近年来关于两亲性多肽自组装研究及应用的进展,介绍了几种常见的两亲性多肽,并进一步阐述其分子结构特征、组装行为和机理、组装体结构和功能以及在纳米技术和生物医学领域中的应用.     

Synthesis of ordered Al nanowire arrays

Ordered Al nanowire arrays with the same nanowire density but the diameters decrease radially embedded in one piece of anodic alumina membranes were successfully fabricated by two-step synthesis: electrodeposition of Zn and replacement in AlCl₃ solution. X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and selected-area electron diffraction techniques were used to characterize the Al nanowires obtained. SEM and TEM images taken from the different areas of Al nanowire arrays show that we can control the growth of aligned Al nanowires with different diameters in a single process at the same time. The investigation results not only have potential applications in photoelectric devices but also open up a new method for fabricating nano-scale materials.     

High loading Pt nanoparticles on ordered mesoporous carbon sphere arrays for highly active methanol electro-oxidation

Three-dimensionally (3D) ordered mesoporous carbon sphere arrays (OMCS) are explored to support high loading (60 wt%) Pt nanoparticles as electrocatalysts for the methanol oxidation reaction (MOR). The OMCS has a unique hierarchical nanostructure with ordered large mesopores and macropores that can facilitate high dispersion of the Pt nanoparticles and fast mass transport during the reactions. The prepared Pt/OMCS exhibits uniformly dispersed Pt nanoparticles with an average size of 2.0 nm on the mesoporous walls of the carbon spheres. The Pt/OMCS catalyst shows significantly enhanced specific electrochemically active surface area (ECSA) (73.5 m² g^-1) and electrocatalytic activity (0.69 mA cm^-2) for the MOR compared with the commercial 60 wt% Pt/C catalyst.