Potassium-ionic conduction in the gallate-ferrite solid electrolytes

New potassium-conducting solid electrolytes in the mixed gallate-ferrite systems (1 − x)Ga₂O₃ · xFe₂O₃ · 0.25TiO₂ · K₂O and 1.5[(1 − x)Ga₂O₃ · xFe₂O₃] · TiO₂ · 2K₂O are synthesized and studied. The electrolytes exhibit high ionic conductivity in the test temperature range of 300 to 750°C (above 10⁻² S/cm at 300°C and above 10⁻¹ S/cm at 700°C). An increase in the conductivity with increasing concentration of iron in the specimens is a general tendency. Possible reasons for the effect of Ga/Fe ratio in the structure of solid electrolytes on their transport properties are discussed.     

Non-isothermal kinetic of oxidation of tungsten carbide

Tungsten carbide, WC, has shown dissimilar thermal behavior when it is heated on changeable heating rate and flow of oxidant atmosphere. The oxidation of WC to WO₃ tends to be in a single and slow kinetic step on slow heating rate and/or low flux of air. Kinetic parameters, on non-isothermal condition, could be evaluated to the oxidation of WC to heating rate below 15°C min⁻¹ or low flow of air (10 mL min⁻¹). The reaction is governed by nucleation and growth at 5 to 10°C min⁻¹ then the tendency is to be autocatalytic, JMA and SB, respectively.     

Formation of Cr(II) Species in the H2/CrO3 System. Parameter control

The thermal behaviour of CrO₃ on heating up to 600°C in dynamic atmospheres of air, N₂ and H₂ was examined by thermogravimetry (TG), differential thermal analysis (DTA), IR spectroscopy and diffuse reflectance spectroscopy (DRS). The results revealed three major thermal events, depending to different extents on the surrounding atmosphere: (i) melting of CrO₃ near 215°C (independent of the atmosphere), (ii) decomposition into Cr₂(CrO₄)₃ at 340–360°C (insignificantly dependent), and (iii) decomposition of the chromate into Cr₂O₃ at 415–490°C (significantly dependent). The decomposition CrO₃ → Cr₂(CrO₄)₃ is largely thermal and involves exothermic deoxygenation and polymerization reactions, whereas the decomposition Cr₂(CrO₄)₃ → Cr₂O₃ involves endothermic reductive deoxygenation reactions in air (or N₂) which are greatly accelerated and rendered exothermic in the presence of H₂. TG measurements as a function of heating rate (2–50°C min⁻¹) demonstrated the acceleratory role of H₂, which extended to the formation of Cr(II) species. This could sustain a mechanism whereby H₂ molecules are considered to chemisorb dissociatively, and then spillover to induce the reduction. DTA measurements as a function of the heating rate (2–50°C min⁻¹) helped in the derivation of non-isothermal kinetic parameters strongly supportive of the mechanism envisaged. This revised version was published online in August 2006 with corrections to the Cover Date.     

Kinetics of the reaction between dimethyldioxirane and 2-methylbutane

The kinetics of the reaction between dimethyldioxirane and 2-methylbutane in acetone solutions were studied spectrophotometrically at 25 °C. The radical-chain induced decomposition of dioxirane proceeding with the participation of the carbon-centered radicals follows the first-order kinetic law. The reaction is inhibited by dioxygen. In the presence of O₂, the dimethyldioxirane consumption is due to the homolysis of the O−O bond (at a rate constant of 6.3·10⁻⁴ s⁻¹) followed by attack of the C−H bond of 2-methylbutane by the biradical formed. The rate constant of the reaction between the alkyl radical and dimethyldioxirane was estimated. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 1785–1788, October, 1997.     

Effect of particle size on pyrolysis characteristics of Elbistan lignite

In this study, the relationship between particle size and pyrolysis characteristics of Elbistan lignite was examined by using the thermogravimetric (TG/DTG) and differential thermal analysis (DTA) techniques. Lignite samples were separated into different size fractions. Experiments were conducted at non-isothermal conditions with a heating rate of 10°C min⁻¹ under nitrogen atmosphere up to 900°C. Pyrolysis regions, maximum pyrolysis rates and characteristic peak temperatures were determined from TG/DTG curves. Thermogravimetric data were analyzed by a reaction rate model assuming first-order kinetics. Apparent activation energy (E) and Arrhenius constant (A _r) of pyrolysis reaction of each particle size fraction were evaluated by applying Arrhenius kinetic model. The apparent activation energies in the essential pyrolysis region were calculated as 27.36 and 28.81 kJ mol⁻¹ for the largest (−2360+2000 μm) and finest (−38 μm) particle sizes, respectively.     

Kinetic of decomposition of some complexes under non-isothermal conditions

Kinetics of thermal decomposition of three structurally similar complexes Co₂Cu(C₂O₄)₃ (R-diam)₂, where R is ethyl, 1,2-propyl or 1,3-propyl, was studied under non-isothermal conditions and nitrogen dynamic atmosphere at heating rates of 5, 7, 10, 12 and 15 K min⁻¹. For data processing the Flynn-Wall-Ozawa and a modified non-parametric kinetic methods were used. By both methods the activation energy are in the range of 97–102 kJ mol⁻¹. The formal kinetic is r=kα(1−α)². Also a compensation effect between lnA and E was evidenced. The kinetic analysis lead to the conclusion of an identic decomposition mechanism by a single step process.     

Crystallization Behavior of SiO2-TiO2 Sol-Gel Thin Films

The aim of this work was to investigate the crystallization behavior of thin films of SiO₂−TiO₂ made by the sol-gel process as function of the TiO₂ content and the temperature and time of heat treatment. Precursor solutions were prepared by hydrolysis of TEOS (tetraethoxysilane) and TPOT (titaniums tetraisopropoxide). Multilayer films were spun on single crystal silicon wafers. The compositions studied were (on a molar percentage basis) 20TiO₂−80SiO₂, 30TiO₂−70SiO₂, 40TiO₂−60SiO₂ and pure TiO₂. The films were heat treated at different temperatures between 300°C and 1200°C, for different periods of time (30 s-90 h). The crystallization kinetics were followed by micro-Raman spectrometry. Grazing incidence X-ray diffraction showed that the films crystallized into one or both of two crystalline phase of TiO₂: anatase and rutile (for pure TiO₂ only). The volume fractions of the crystalline phase varied from very low values (<1%), up to 100%, for a TiO₂ sample heat treated at 800°C for 8 hours. The results show that the volume fraction of crystalline phase is strongly influenced by the heat treatment temperature and also, to a smaller extent, by the heat treatment time. The most important parameter, however, is the composition of the films: the higher their TiO₂ concentration, the lower is the crystallization temperature and the larger is the crystallized fraction.     

Non-isothermal crystallization of K<Subscript>2</Subscript>O·TiO<Subscript>2</Subscript>·3GeO<Subscript>2</Subscript> glass

The crystallization of K₂O·TiO₂·3GeO₂ glass under non-isothermal condition was studied. In powdered glass with particle sizes less than 0.15 mm, surface crystallization was dominant and an activation energy of crystal growth of E _a,s=327±50 kJ mol⁻¹ was calculated. In the size range 0.15 to 0.45 mm, both surface and volume crystallization occurred. For particle sizes >0.45 mm, volume crystallization dominated with spherulitic morphology of the crystals growth and E _a,v=359±64 kJ mol⁻¹ was calculated.     

A kinetic analysis of thermal decomposition of polyaniline/ZrO<Subscript>2</Subscript> composite

Synthesis, characterization and thermal analysis of polyaniline (PANI)/ZrO₂ composite and PANI was reported in our early work. In this present, the kinetic analysis of decomposition process for these two materials was performed under non-isothermal conditions. The activation energies were calculated through Friedman and Ozawa-Flynn-Wall methods, and the possible kinetic model functions have been estimated through the multiple linear regression method. The results show that the kinetic models for the decomposition process of PANI/ZrO₂ composite and PANI are all D₃, and the corresponding function is ƒ(α)=1.5(1−α)^2/3[1−(1-α)^1/3]−1. The correlated kinetic parameters are E _a=112.7±9.2 kJ mol⁻¹, lnA=13.9 and E _a=81.8±5.6 kJ mol⁻¹, lnA=8.8 for PANI/ZrO₂ composite and PANI, respectively.     

Products and kinetics of non-isothermal decomposition of vanadium(IV) oxide compounds

The kinetics of dehydration and decomposition of VOSO₄·2H₂O, VOSO₄ and VOSeO₃·H₂O was studied under non-isothermal heating on a derivatograph. The stages and products of the thermal decomposition were determined. It was proved that VOSO₄·2H₂O decomposes to V₂O₅ while VOSeO₃·H₂O − to V₂O₄. A number of kinetic models and calculation procedures were used to determine the values of the kinetic parameters characterizing the process. The parameters calculated were compared and analyzed. IR-spectra of the initial substances and the solid residue after decomposition are presented.     

Kinetic study of the crystallization processes of some decorative ceramic glazes

A kinetic study of the crystallization processes was performed for some decorative ceramic glazes in the PbO-SiO₂-Na₂O-K₂O-CaO(BaO)-Al₂O₃-B₂O₃ system with addition of 10% TiO₂ and ZnO. The crystallization kinetics has been studied in non-isothermal conditions using DTA technique. The apparent activation energies of the crystallization processes were calculated using the Kissinger method. The main crystalline phase, which provides the decorative effect, is rutile. This has been identified by X-ray diffraction and it is clearly visible in the optical microscopy images taken in transmitted light, as needle-like or even prismatic crystals arranged in radial-fibrous aggregates.     

Kinetics and mechanism of the reactions of hexaaqua rhodium (III) with sulphur (IV) in aqueous medium

An O-bonded sulphito complex, Rh(OH₂)₅(OSO₂H)²⁺, is reversibly formed in the stoppedflow time scale when Rh(OH₂) ₆ ³⁺ and SO₂/HSO ₃ ⁻ buffer (1 <pH< 3) are allowed to react. For Rh(OH₂)₅OH₂₊+ SO₂ □ Rh(OH₂)₅(OSO₂H)²⁺ (k₁/k_-1), k₁ = (2.2 ±0.2) × 10³ dm³ mol⁻¹ s⁻¹, k₋1 = 0.58 ±0.16 s⁻¹ (25°C,I = 0.5 mol dm⁻³). The protonated O-sulphito complex is a moderate acid (K _d = 3 × 10⁻⁴ mol dm⁻³, 25°C, I= 0.5 mol dm⁻³). This complex undergoes (O, O) chelation by the bound bisulphite withk= 1.4 × 10⁻³ s⁻¹ (31°C) to Rh(OH₂)₄(O₂SO)⁺ and the chelated sulphito complex takes up another HSO ₃ ⁻ in a fast equilibrium step to yield Rh(OH₂)₃(O₂SO)(OSO₂H) which further undergoes intramolecular ligand isomerisation to the S-bonded sulphito complex: Rh(OH₂)₃(O₂SO)(OSO₂)^- → Rh(OH₂)₃(O₂SO)(SO₃)⁻ (k _iso = 3 × 10⁻⁴ s⁻¹, 31°C). A dinuclear (μ-O, O) sulphite-bridged complex, Na₄[Rh₂(μ-OH)₂(OH)₂(μ-OS(O)O)(O₂SO)(SO₃) (OH₂)]5H₂O with (O, O) chelated and S-bonded sulphites has been isolated and characterized. This complex is sparingly soluble in water and most organic solvents and very stable to acid-catalysed decomposition     

Research of thermal decomposition kinetic characteristic of emulsion explosive base containing Fe and Mn elements

The kinetic characteristic of thermal decomposition of the Emulsion Explosive Base Containing Fe and Mn elements (EEBCFM) which was used to prepare nano-MnFe₂O₄ particles via detonation method was investigated by means of non-isothermal DSC and TG methods at various heating rates of 2.5, 5 and 7.5°C min⁻¹respectively under the atmosphere of dynamic air from room temperature to 400°C. The results indicated that the EEBCFM was sensitive to temperature, especially to heating rate and could decompose at the temperature up to 60°C. The maximum speed of decomposition (dα/dT)_m at the heating rate of 5 and 7.5°C min⁻¹ was more than 10 times of that at 2.5°C min⁻¹ and nearly 10 times of that of the second-category coal mine permitted commercial emulsion explosive (SCPCEE). The plenty of metal ions could seriously reduce the thermal stability of emulsion explosive, and the decomposition reaction in the conversion degree range of 0.0∼0.6 was most probably controlled by nucleation and growth mechanism and the mechanism function could be described with Avrami-Erofeev equation with n=2. When the fractional extent of reaction α>0.6, the combustion of oil phase primarily controlled the decomposition reaction.     

Synthesis and characterization of nanocrystalline zinc aluminate spinel by sol–gel technique using modified alkoxide precursor

Nanosized zinc aluminate spinel (gahnite, ZnAl₂O₄) powders were prepared by sol−gel technique at low sintering temperatures. Aluminium-sec-butoxide [Al(O^sBu)₃] and zinc nitrate hexahydrate Zn(NO₃)₂ . 6H₂O were used as starting materials. Gels with and without chelating agent were prepared. Ethyl-acetoacetate (C₆H₁₀O₃) was used as a chelating agent in order to control the rate of hydrolysis of Al(O^sBu)₃. The dried gels and thermally treated samples were characterized by means of Differential Thermal Analysis and Thermo-Gravimetric Analysis (DTA, TGA), X-ray Diffraction (XRD), Fourier Transform Infrared spectroscopy (FTIR) and Transmission Electron Microscopy (TEM). The surface area was measured by Brunauer-Emmet-Teller (BET) adsorption–desorption isotherms. It has been established that chelation enables to obtain a transparent gel. The thermal evolution of gels was characterized by two crystallization processes in the range 200–400 °C and 600–700 °C. Both processes yielded pure ZnAl₂O₄ as evidenced by XRD, i.e. zinc aluminate spinel powders were produced by gel heat-treatment at temperatures as low as 300 °C. The average gahnite crystallite size for the samples sintered in the temperature range of 400–1000 °C has been calculated from the broadening of XRD lines revealing that nanocrystalline powders were prepared. The surface areas measured for the samples fired at 700 °C for 2 h were 43.1 and 62.6 m² g⁻¹, for sample without and with the chelating agent, respectively. TEM micrographs confirmed the nano-scale size of particles.     

Non-isothermal Crystallization of UHMWPE

Processing of Ultra High Molecular Weight Polyethylene (UHMWPE) parts involves non-isothermal cooling leading to crystallinity variations, which cause variations in the mechanical properties. Study of non-isothermal crystallization kinetics of UHMWPE forms the basis for process modelling. The crystallization of UHMWPE was studied at seven different cooling rates. The crystallization onset and peak temperatures were linearly related to the cooling rate. The crystallization of UHMWPE was concluded to be a nucleation dominated process with small contribution from growth of nuclei. Differences in ultimate crystallinity (≈11%) were produced due to different cooling rates. A significant portion of the change in ultimate crystallinity occurred at lower cooling rates (<6°C min⁻¹). At higher cooling rates (6–22°C min⁻¹) the change in ultimate crystallinity was insignificant. This revised version was published online in July 2006 with corrections to the Cover Date.     

Crystalline phase content and ionic conductivity correlation in LATP glass–ceramic

Li₂O–Al₂O₃–TiO₂–P₂O₅ (LATP) glass was fabricated by conventional melt quenching route. Glass transition temperature (T _g = 296 °C) and crystallization temperatures (T _C1,2) were obtained from thermal analysis. LATP glass was converted to glass–ceramic by heat treatment in the range 550–950 °C for 6 h. X-ray diffraction analysis revealed LiTi₂(PO₄)₃ as a major phase. Ionic conductivity increased monotonically with concentration, reaching a maximum of ~10⁻⁴ S/cm. AlPO₄ phase was detected in samples heat-treated above 850 °C. Its presence decreased the conductivity, suggesting LiTi₂(PO₄)₃ phase as main contributor to high ionic conductivity. NMR spectra confirmed the presence of mobile ⁷Li ions in the entire sample series and also gave some information on the structure and dynamics of conductivity.     

A supramolecular complex based on poly-Keggin-anion chains: synthesis, structure characterization, and conductivity

Abstract  

A proton-conductive supramolecular complex, {[Cu(H₂O)₈][H(H₂O)₃](HINO)₄(PMo₁₂O₄₀)} _n , was constructed by a self-assembly of H⁺(H₂O)₃ clusters, [Cu(H₂O)₈]²⁺ clusters, [PMo₁₂O₄₀]³⁻ anions, and isonicotinic acid N-oxide (HINO). Single-crystal X-ray diffraction analysis at 293 K revealed that the complex presented the three-dimensional (3D) supramolecular framework built from non-covalent interactions. Interestingly, [PMo₁₂O₄₀]³⁻ anions self-assembled into poly-Keggin-anion chains in the supramolecular framework. Thermogravimetric analysis shows no weight loss in the temperature range of 20–100 °C, indicating that all water molecules in the unit structure are not easily lost below 100 °C. Surprisingly, the proton conductivity of the complex in the temperature range of 85–100 °C under 98% RH condition reached good proton conductivity of 10⁻³ S cm⁻¹. A possible mechanism of the proton conduction was proposed according to the experimental results.     

Kinetics of the ?OH-radical initiated reactions of acetic acid and its deuterated isomers

Kinetics of the ^•OH-initiated reactions of acetic acid and its deuterated isomers have been investigated performing simulation chamber experiments at T = 300 ± 2 K. The following rate constant values have been obtained (± 1σ, in cm³ molecule⁻¹ s⁻¹): k ₁(CH₃C(O)OH + ^•OH) = (6.3 ± 0.9) × 10⁻¹³, k ₂(CH₃C(O)OD + ^•OH) = (1.5 ± 0.3) × 10⁻¹³, k ₃(CD₃C(O)OH + ^•OH) = (6.3 ± 0.9) × 10⁻¹³, and k ₄(CD₃C(O)OD + ^•OH) = (0.90 ± 0.1) × 10⁻¹³. This study presents the first data on k ₂(CH₃C(O)OD + ^•OH). Glyoxylic acid has been detected among the products confirming the fate of the ^•CH₂C(O)OH radical as suggested by recent theoretical studies.     

Solid electrolytes with cesium-cationic conduction in the Fe<Subscript>2</Subscript>O<Subscript>3</Subscript>-TiO<Subscript>2</Subscript>-Cs<Subscript>2</Subscript>O system

New cesium-conducting solid electrolytes based on cesium monoferrite in the Fe₂O₃-TiO₂-Cs₂O system are synthesized and studied. It is found that the introduction of titanium dioxide significantly reduces the electronic component of conductivity, which prevails in pure CsFeO₂, and raises the ionic conductivity. The latter becomes predominant with increasing concentration of TiO₂. The effect of dimensional factor on the characteristics of electrolyte is shown. The optimal compositions studied have very high cesium-cationic conductivity: it is above 10⁻² S cm ⁻¹ at 300°C.     

A thermogravimetic kinetic study of uncatalyzed diesel soot oxidation

Isothermal and non-isothermal thermogravimetric experiments (TG) with real and synthetic (Printex U) soot were performed at different O₂ concentrations (5–22%O₂/N₂), sample masses (0.5–10 mg), heating (5–20 °C min⁻¹) and flow rates (80–100 mL min⁻¹). The significance of the experimental and calculation uncertainties (i.e. experimental parameter dependencies, calculation method and mass transfer limitations), which are related to TG for the extraction of chemical kinetics, was explored. Finally, an intrinsic kinetic equation for soot oxidation is proposed.