酚酞分子印迹聚合物的制备及特异吸附性能

以泻药酚酞为模板分子,4-乙烯基吡啶为功能单体制备了模板分子和功能单体不同比例的一系列酚酞分子印迹聚合物。利用扫描电镜对聚合物进行了表面形态分析,采用静态平衡实验法研究了聚合物对模板分子及其类似物的吸附行为和选择性识别能力。实验结果表明,所制备的分子印迹聚合物,吸附 3 h 后基本接近最大吸附量,其中模板分子、4-乙烯基吡啶和交联剂的摩尔比为 1∶6∶20的MIP2的印迹因子为 2.30,效果最佳。Scatchard 分析表明, 在所研究的浓度范围内,吸附过程存在两类结合位点,一类高亲和力结合位点的离解常数为Kd1= 0.63 mmol/L,最大表观结合量 Qmax1 = 25.4 umol/g,另一类低亲和力结合位点的离解常数为 Kd2 =3.5 mmol/L,最大表观结合量 Qmax2 = 61.9 umol/g,通过与酚酞类似物质在酚酞分子印迹聚合物上的吸附行为比较,表明对酚酞具有很好的选择性吸附。     

Design of an imprinted clean-up method for mycophenolic acid in maize

In the present work, the development of imprinted polymers selective towards mycophenolic acid and their application in food analysis are reported for the first time. To synthesize the molecularly imprinted polymer (MIP) 4-vinylpyridine and ethyleneglycol dimethacrylate were applied as functional monomer and cross-linker, respectively. Besides the toxin itself, the implementation of structural analogues as templates was evaluated. A molecularly imprinted solid-phase extraction (MISPE) procedure was designed for the selective clean-up of maize extracts. Binding experiments and Scatchard analysis indicated the presence of specific binding sites in the imprinted polymers. The imprinting effect varied along with the selected template. The dissociation constant (K(D)) of the higher affinity binding sites ranged from 0.8 μmol/l to 15.6 μmol/l, while the K(D) of the lower affinity binding sites was in the range of 138.5-519.3 μmol/l. The performance of the MIPs throughout the clean-up of spiked maize sample extracts was evaluated and compared with the results obtained when applying a non-imprinted polymer. Depending on the polymers and the spiked concentration, recoveries after MISPE and non-imprinted solid-phase extraction varied respectively from 49% to 84% and from 28% to 31%. The imprinted polymers were superior regarding matrix effect, limit of detection (LOD) and limit of quantification (LOQ). LOD ranged from 0.17 μg/kg to 0.25 μg/kg and LOQ varied from 0.57 μg/kg to 0.82 μg/kg. Analysis of 15 maize samples by liquid chromatography tandem mass spectrometry revealed that the MIPs could be excellent sorbents for clean-up of contaminated food samples.     

光接枝表面修饰法制备牛血红蛋白的分子印迹微球

聚苯乙烯球载体表面经引发转移终止剂修饰后, 采用光接枝表面印迹方法制备了以牛血红蛋白(BHb)为模板分子、丙烯酰胺为功能单体和N,N′-亚甲基双丙烯酰胺为交联剂的分子印迹聚合物微球(MIP). 进一步采用红外光谱(IR)、扫描电子显微镜(SEM)和元素分析对聚合物微球进行了表征, 证实了载体表面成功地接枝了分子印迹层, 并研究了其吸附性能和分子识别选择性能. 结果表明, 采用光接枝表面修饰法制备的分子印迹微球对模板分子有着很好的吸附容量和识别选择性.     

Chromatographic characteristics of cholesterol-imprinted polymers prepared by covalent and non-covalent imprinting methods

Cholesterol-imprinted polymers were prepared in bulk polymerization by the methods of covalent and non-covalent imprinting. The former involved the use of a template-containing monomer, cholesteryl (4-vinyl)phenyl carbonate, while the latter used the complexes of template and functional monomer, methacrylic acid or 4-vinylpyridine prior to polymerization. Columns packed with these molecularly imprinted polymers (MIPs) were all able to separate cholesterol from other steroids. For different combinations of cholesterol and beta-estradiol concentrations in a total of 1 g/l, the peak retention times for both compounds were nearly constant. The adsorption capacity for cholesterol onto the MIPs was found to significantly depend on the use of functional monomers, but the selectivity factors were only slightly different from each other at 2.9 to 3.2 since the separation was all based on the specific binding of cholesterol to recognition sites formed on the imprinted polymers. The capacity factors for cholesterol were determined to be 3.5, 4.0 and 3.1, respectively, for covalently imprinted, 4-vinylpyridine-based, and methacrylic acid-based non-covalently imprinted polymers. However, the covalently imprinted polymer was found to have a higher adsorption capacity for cholesterol and about fivefold higher chromatographic efficiency for cholesterol separation, in comparison with non-covalently imprinted polymers. The use of covalent imprinting significantly reduced the peak broadening and tailing. This advantage along with constant retention suggests that the covalently imprinted polymer has potential for quantitative analysis.     

Investigation of imprinting parameters and their recognition nature for quinine-molecularly imprinted polymers

A series of molecularly imprinted polymers (MIPs) was prepared using quinine as the template molecules by bulk polymerization. The presence of monomer-template solution complexes in non-covalent MIPs systems has been verified by both fluorescence and UV-vis spectrometric detection. The influence of different synthetic conditions (porogen, functional monomer, cross-linkers, initiation methods, monomer-template ratio, etc.) on recognition properties of the polymers was investigated. Scatchard analysis revealed that two classes of binding sites were formed in the imprinted polymer. The corresponding dissociation constants were estimated to be 45.00 micromol l(-1) and 1.42 mmol l(-1), respectively, by utilizing a multi-site recognition model. The binding characteristics of the imprinted polymers were explored in various solvents using equilibrium binding experiments. In the organic media, results suggested that polar interactions (hydrogen bonding, ionic interactions, etc.) between acidic monomer/polymer and template molecules were mainly responsible for the recognition, whereas in aqueous media, hydrophobic interactions had a remarkable non-specific contribution to the overall binding. The specificity of MIP was evaluated by rebinding the other structurally similar compounds. The results indicated that the imprinted polymers exhibited an excellent stereo-selectivity toward quinine.     

A NOVEL MOLECULARLY IMPRINTED POLYMER： SYNTHESIS AND ADSORPTION BEHAVIOR OF GATIFLOXACIN

A kind of molecularly imprinted polymer （MIPs） with high selectivity was prepared using methacrylic acid （MAA） as functional monomer, ethylene glycol dimethacrylate （EDMA） as crosslinker and Gatifloxacin as template. The effect of various parameters such as volume of solvent, functional monomer dosage, crosslinker dosage and polymerization time were investigated. The selective binding experiment for substrates show that the affinity and selectivity for Gatifloxacin were higher than that for blank polymer. Scatchard analysis show that the MIPs recognized template with two kinds of binding sites. The dissociation constant Kd and maximum adsorption quantity Qmax of these two kinds of binding sites were calculated： Kd1 and Qmax1 of the binding sites with high affinity were 8.67×10^-4 mol/L and 28.19μmol/g, while Kd2 and Qmax2 of the binding sites with low affinity were 1.05×10^-3 mol/L and 33.20μmol/g respectively.     

Probing cavity versus surface preference of fluorescent template molecules in molecularly imprinted polystyrene microspheres

Functional polystyrene (PS) crosslinked microbeads were developed by dispersion polymerization as fluorescent molecularly imprinted polymers (MIPs) having cavities with specific recognition sites. The functional azobenzene molecule modified with pyridine was self‐assembled with Pyrenebutyric acid (template molecules), and introduced during the second stage of dispersion polymerization of polystyrene. The template molecule was removed from MIP by Soxhlet using acetonitrile as solvent. Non imprinted polymer (NIP) having no template was also synthesized for comparative study. Fluorescence spectroscopy could be used as a tool to derive insight into the location of the template molecules on the MIP or NIP. The template molecules were adsorbed on the surface of the NIPs during binding studies, which was evidenced from the pyrene excimeric emission observed at 440 nm. The template binding efficiency of the NIPs were much lower compared to MIPs. Pyrene emission from MIP upon rebinding showed typical monomeric emission in the 375–395 nm range, confirming its location in isolated cavities. In rebinding studies of the template molecules, the MIPs selectively took up the template for which the cavity was designed, which demonstrated their selectivity towards template molecules. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 1558–1565     

Evaluation of new selective molecularly imprinted polymers prepared by precipitation polymerisation for the extraction of phenylurea herbicides

Three different molecularly imprinted polymers (MIPs) have been prepared by precipitation polymerisation using linuron (LIN) or isoproturon (IPN) (phenylurea herbicides) as templates and methacrylic acid (MAA) or trifluormethacrylic acid (TFMAA) as functional monomers. The ability of the different polymers to selectively rebind not only the template but also other phenylurea herbicides has been evaluated. In parallel, the influence of the different templates and functional monomers used during polymers synthesis on the performance of the obtained MIPs was also studied through different rebinding experiments. The experimental binding isotherms were fitted to the Langmuir-Freundlich isotherm allowing to describe the kind of binding sites present in the imprinted polymers under study. It was concluded that TFMAA-based polymer using IPN as template presents the best properties to be used as a selective sorbent for the extraction of phenylurea herbicides.     

Carbohydrate recognition by porphyrin-based molecularly imprinted polymers

[structure: see text] Porphyrin-based molecularly imprinted polymers (MIPs) were prepared for carbohydrate recognition. A urea-appended porphyrin functional monomer was utilized to provide complementary functionality and quality binding sites throughout the polymer. Each porphyrin-based polymer demonstrates high affinity and differential selectivity for closely related carbohydrates that correlate to the structure of the template used in the imprinting process.     

Synthetic creatinine receptor: imprinting of a Lewis acidic zinc(II)cyclen binding site to shape its molecular recognition selectivity

Molecularly imprinted polymers (MIPs) from polymerizable Lewis acidic zinc(II)cyclen complexes and ethylene glycol dimethyl acrylate have been prepared. For the imprinting process the template molecule creatinine is reversibly coordinated to the zinc atom. The high strength of this interaction allows analyte binding to the MIP from aqueous solution with high affinity. Its pH dependence is used for controlled guest release with nearly quantitative analyte recovery rate. The binding capacity and selectivity profile of the MIP remains constant through several pH controlled binding and release cycles. MIPs missing a suitable metal binding site showed no significant affinity for thymine or creatinine. Flavin adsorbs nonspecifically to all polymers. The imprinting process reverses the binding selectivity of zinc(II)cyclen for creatinine and thymine from 1:34 in homogeneous solution to 3.5:1 in the MIP. Scatchard plot analysis of creatinine binding isotherms reveals uniform binding of the imprint, with fits indicating a one-site model; however, similar analysis for thymine indicate high and low affinity sites. This corresponds to unrestricted coordination sites freely accessible for thymine, e.g., at the polymer surface, and misshaped imprinted sites, which still can accommodate thymine. More than 50% of all binding sites exclusively bind creatinine and are not accessible to thymine. The binding properties of a copolymer of polymerizable zinc(II)cyclen and ethylene glycol dimethyl acrylate missing the creatinine template, which match the binding selectivity of the complex in solution, confirm that the origin of altered selectivities is the imprinting process. With binding ability at physiological pH, the MIPs are applicable for tasks in medicinal diagnostics or biotechnology. Imprinted zinc(II)cyclen complexes provide, like a metalloenzyme binding motif, high binding affinity by reversible coordination while the surrounding macromolecule determines binding selectivity.     

Non-covalently lactose imprinted polymers and recognition of saccharides in aqueous solutions

The aim of this work was to prepare lactose imprinted polymer and study of its selectivity for the recognition of different mono- and disaccharides. A series of molecularly imprinted polymers (MIPs) against lactose were synthesized and their binding properties were compared with a Blank non-imprinted polymer. Methacrylamide (MAAM) and ethylene glycol dimethacrylate were used as functional monomer and cross-linker, respectively. Dimethylsulfoxide was also applied as polymerization solvent. Different lactose:MAAM ratios were applied and optimized MIP was selected in a conventional batch adsorption study. The dissociation constant and maximum binding sites of polymer were determined using the Scatchard analysis. The selectivity of MIP for different mono- and disaccharides was also evaluated. The results indicated that the shape of cavity and orientation of functional monomers in binding sites and the spatial arrangement of hydroxyl groups in saccharide structure were responsible for the selectivity of lactose imprinted polymer.     

Suppression of background sites in molecularly imprinted polymers via urea-urea monomer aggregation

The molecular imprinting process provides a synthetically efficient route to polymers with tailored recognition properties. However, the binding properties of the templated binding sites are often masked by the more prevalent background binding sites. Therefore, a strategy for reducing the number of background binding sites was developed and evaluated that uses functional monomer aggregation to suppress the formation of background sites. A series of imprinted and non-imprinted polymers was formed using crosslinking urea monomer and were evaluated for their ability to rebind the anionic template, tetrabutylammonium diphenyl phosphate (TBA-DPP). The urea monomer was shown to form linear hydrogen bonded aggregates in solution and in the solid state. Functional monomer aggregation in the polymerization solution was shown to dramatically reduce the numbers of background binding sites by occupying and blocking the urea recognition groups that were not bound to the template molecule. Despite the low aggregation constant of the urea monomer (3.5 M(-1) in chloroform), the number of background sites was reduced by more than 60%. We predict that this strategy of using monomers that aggregate to reduce background binding sites is a general one for MIPs and other types of polymers with tailored recognition properties. The key is to identify self-assembling monomers where the guest binding processes are stronger than the aggregation processes.     

以桑色素为模板的分子烙印聚合物的制备、结合特性及其在薄层色谱固定相方面的应用

以桑色素为模板,选用不同的功能单体和致孔剂制备了一系列分子烙印聚合物,采用结合实验考察了它们对底物的吸附特性,发现以丙烯酰胺为功能单体,以乙酸乙酯为致孔剂制得的烙印聚合物对底物有很好的选择性,同时对一些结构相似的化合物具有一定的结合力.Scatchard方程研究结果表明,在研究的浓度范围内聚合物形成了一类等价的结合位点,其平衡离解常数为0.877mmol/L,对模板分子的最大表观结合量为59.18μmol/g.可认为桑色素分子中3,7,4'位的羟基与功能单体的氢键作用是分子烙印聚合物具有底物选择性的主要因素.以该分子烙印聚合物为薄层色谱固定相,可以把模板分子从结构相似的化合物中分离出来,最小分离度为1.19.     

槲皮素金属配位分子印迹聚合物的识别性能

以槲皮素与Zn(Ⅱ)的配合物为模板,在甲醇溶液中制备金属配位分子印迹聚合物.通过紫外光谱研究了槲皮素与Zn(Ⅱ)的配位方式及配位比,验证了槲皮素、Zn(Ⅱ)和4-乙烯基吡啶之间的三元配位作用.利用红外光谱对产物的结构进行了表征.用平衡结合实验考察了功能单体及交联剂用量对聚合物吸附性能的影响,优化了聚合物的反应配比.同时对系列印迹聚合物的识别体系进行了考察.结果表明,槲皮素-Zn(Ⅱ)模板印迹聚合物对槲皮素-Zn(Ⅱ)的配合物表现出明显的吸附选择性和特异性,对槲皮素结构类似物芦丁和柚皮素的吸附选择性较差,分离因子分别为3.21和1.91.     

软骨藻酸分子印迹聚合物的制备及其固相萃取应用

以贝毒-软骨藻酸的结构类似物1,3,5-戊烷三羧酸为模板分子,4-乙烯基吡啶为功能单体,乙二醇二甲基双丙烯酸酯为交联剂,合成了对软骨藻酸具有较好选择性的分子印迹聚合物。经索氏提取去除模板分子后,在聚合物内部形成了与模板分子1,3,5-戊烷三羧酸以及结构类似物软骨藻酸尺寸、形状以及活性基团互补的结合位点。通过静态平衡结合实验研究了该聚合物的结合能力和选择性能,与化学组成相同的相应非印迹聚合物相比,1,3,5-戊烷三羧酸的分子印迹聚合物对软骨藻酸具有较高的吸附性能和选择性。用150mg印迹聚合物填充于1.0mL玻璃注射器制成的分子印迹固相萃取柱,采用离线模式,并结合高效液相色谱实现紫贻贝和海水中软骨藻酸的分离与检测。对于加标2mg/L的紫贻贝和海水样品,回收率分别达到(93.4±4.9)%和(89.7±3.2)%(n=3)。     

Recognition characteristics of dibenzofuran by molecularly imprinted polymers made of common polymers

Dibenzofuran (DBF) recognition was studied by a molecularly imprinted polymer (MIP) made of commercially available polymers: polyvinyl chloride (PVC), polysulfone, polystyrene, and polyacrylonitrile. Preparation of MIPs was carried out by phase inversion of the polymer. Respective polymer solutions were coagulated with DBF template in water (non-solvent). In addition, reference polymers without the template were prepared in same manner as unimprinted polymers. After the DBF template was extracted from the solidified polymers by washing with methanol (MeOH), recognition experiments of DBF by the imprinted polymers were carried out for DBF in MeOH solutions. Equilibrium constants for DBF were calculated from saturation binding kinetics. Equilibrium experiment results reveal that recognition was effective for DBF binding to the DBF-imprinted polymer, especially for the imprinted PVC.     

Affinity screening by packed capillary high performance liquid chromatography using molecular imprinted sorbents. II. Covalent imprinted polymers

This study concentrates on the production of covalent molecular imprint polymers (MIPs) as highly selective sorbents for nortriptyline (NOR), a representative tricyclic antidepressant (TCA). The functionalized template contains a polymerizable 4-vinylphenyl carbamate moiety used to bind the template molecule to the polymer matrix. Polymerization with a cross-linker followed by hydrolytic cleavage of the labile carbamate functionality leaves an MIP with selective binding sites capable of binding template through hydrogen bonding interactions. Demonstrated chromatographically through a "selection index", these MIPs showed high selectivity for the template molecule (NOR) among a library of structurally similar compounds. The recognition was found to correlate with structural similarity to the template compound. A direct comparison between covalent and non-covalent molecular imprinting strategies reveals a great deal of improvement in the peak shape of the retained compound resulting from covalent imprinting (evidenced by peak asymmetry factors A.).     

Preparation of bovine hemoglobin-imprinted polymer beads via the photografting surface-modified method

Molecularly imprinted polymers (MIPs), based on photografting surface-modified polystyrene beads as matrices, were prepared with acrylamide as the functional monomer, bovine hemoglobin as the template molecule and N, N′-methylene bisacrylamide as the crosslinker in a phosphate buffer. The results of IR, scanning electron microscope (SEM) and elemental analyses demonstrated the formation of a grafting polymer layer on the polystyrene-bead surface. Subsequent removal of the template left behind cavities on the surface of the polymer matrix with a shape and an arrangement of functional groups having complementary binding sites with the original template molecule. The adsorption studies showed that the imprinted polymers have a good adsorption capacity and specific recognition for bovine hemoglobin as the template molecule. Our results demonstrated that the polymer prepared via the photografting surface-modified method exhibited better selectivity for the template. Attempts to employ the new method in molecular imprinting techniques may introduce new applications for MIPs and facilitate probable protein separation and purification. __________ Translated from Chemical Journal of Chinese Universities, 2008, 29(1): 64–70     

Influence of intramolecular hydrogen bond of templates on molecular recognition of molecularly imprinted polymers

Three molecularly imprinted polymers (MIPs) were prepared corresponding to three structurally related template compounds 4-hydroxybenzoic acid (4-HBA), gentisic acid (GA) and salicylic acid (SA) that differ in intramolecular hydrogen bonding ability using acrylamide (AA) as a functional monomer. HPLC method was used to evaluate the binding performances of the MIPs to the templates and several analogues. The results showed that the difference in their molecular recognition ability was pronounced. The highest molecular recognition ability was observed for 4-HBA-imprinted polymer. It was proved that the hydrogen bond interaction between the functional monomer and the template (4-HBA) played a major role in the recognition process and Scatchard analysis showed that two classes of binding sites were formed in 4-HBA-imprinted polymer. Their dissociation constants were estimated to be 1.76×10⁻⁴ and 1.40×10⁻³ mol l⁻¹, respectively. But for GA- or SA-imprinted polymer the molecular recognition ability was not improved compared to the blank polymer (BP). By comparison of the structures of the three templates, it was concluded that the molecular recognition ability will decrease when the template itself is able to form intramolecular hydrogen bond in the molecular imprinting process. This study will be helpful for us to understand the molecular recognition mechanism of MIPs and of instructive significance for the prediction of the selectivity of MIPs.     

Synthesis of homoveratric acid-imprinted polymers and their evaluation as selective separation materials

A bulk polymerization method was used to easily and efficiently prepare homoveratric acid (3,4-dimethoxyphenylacetic acid)-imprinted polymers from eight basic monomers: 2-vinylpyridine, 4-vinylpyridine, 1-vinylimidazole, N-allylaniline, N-allylpiperazine, allylurea, allylthiourea, and allylamine, in the presence of homoveratric acid as a template in N,N-dimethylformamide as a porogen. The imprinted polymer prepared from allylamine had the highest affinity to the template, showing an imprinting factor of 3.43, and allylamine polymers MIP8/NIP8 were selected for further studies. Their binding properties were analyzed using the Scatchard method. The results showed that the imprinted polymers have two classes of heterogeneous binding sites characterized by two pairs of K(d), B(max) values: K(d)(1) = 0.060 μmol/mL, B(max)(1) = 0.093 μmol/mg for the higher affinity binding sites, and K(d)(2) = 0.455 μmol/mL, B(max)(2) = 0.248 μmol/mg for the lower affinity binding sites. Non-imprinted polymer has only one class of binding site, with K(d) = 0.417 μmol/mL and B(max) = 0.184 μmol/mg. A computational analysis of the energies of the prepolymerization complexes was in agreement with the experimental results. It showed that the selective binding interactions arose from cooperative three point interactions between the carboxylic acid and the two methoxy groups in the template and amino groups in the polymer cavities. Those results were confirmed by the recognition studies performed with the set of structurally related compounds. Allylamine polymer MIP8 had no affinity towards biogenic amines. The obtained imprinted polymer could be used for selective separation of homoveratric acid.