Substituent effect on the emission behavior of thiazolidinedione derivatives in cationic and anionic micellar media

Thiazolidinedione (TZD) derivatives have been found to possess potent immunostimulatory properties as well as antiarthritic, antidiabetic and oncostatic activities. These compounds are free radical scavengers. Photophysical properties of the compounds have been studied in different aqueous micellar environments using steady state and time resolved emission spectroscopy. Appreciable hypsochromic shifts with enhancement in the fluorescence intensities have been observed in the ionic micellar media. The binding constants and energy changes during probe-micelle binding have been evaluated from relevant fluorescence data. Polarity of the microenvironment surrounding the probe molecules has been determined in the micellar systems.     

Photolysis of 1,2-dihydroquinolines in micellar solutions of anionic and cationic surfactants

The kinetics of the photolysis of substituted 1,2-dihydroquinolines (DHQ) in micellar solutions was studied by steady-state and flash photolysis. The photolysis mechanism depends dramatically on the location of DHQ molecules in micelles, which is governed by the surfactant nature. In micellar solutions of the anionic surfactant sodium dodecyl sulfate (SDS), where the DHQ molecules are located in the Stern layer, the intermediate species decay kinetics follows a first-order law. When DHQ is in neutral form (pH 4–12), the rate constant of the intermediate carbocation decay increases from 25 to 198 s^?1 with an increasing concentration of DHQ in micelles. The positive micellar catalysis is caused by the acceleration of the final product formation with the DHQ molecule via proton abstraction from the intermediate cation. The formation of several types of intermediate species—carbocations in the aqueous phase and aminyl radicals in micelles—is observed in micellar solutions of the cationic surfactant cetyltrimethylammonium bromide (CTAB) due to the preferential location of DHQ molecules in the micellar core. The carbocation decays via a pseudofirst-order reaction with a rate constant close to that in the aqueous solution. The lifetime of the DHQ aminyl radicals in the micellar solutions is longer by several orders of magnitude than the lifetime observed for homogeneous solutions of hydrocarbons and alcohols.     

Partitioning of macrocyclic compounds in a cationic and an anionic micellar solution: a small-angle neutron scattering study

Following a previous investigation on partitioning of some macrocycle compounds in sodium dodecyl sulfate (SDS) and dodecyltrimethylammonium bromide (DTAB) aqueous solutions and their effect on the micellar structure, a small-angle neutron scattering (SANS) study has been performed at fixed surfactant content (0.20 mol/L) and varying macrocycle concentrations from 0.20 up to 1.0 mol/L. Conductivity measurements have been also performed in order to evaluate the effect of the presence of macrocycles on the critical micellar concentration (cmc) of the two surfactants. SANS experimental data were fitted successfully by means of a core-plus-shell monodisperse prolate ellipsoid model. It has been found that 1,4,7,10,13,16-esaoxacyclooctadecane (18C6) and 4,7,13,16-tetraoxa-1,10-diazacyclooctadecane (22) do not interact with DTAB micelles whereas their sodium complexes interact with SDS aggregates and partially localize, as a consequence of electrostatic interaction, on the micellar surface or in the Stern layer. 2,5,8,11,14,17-Hexaoxabicyclo[16.4.0] dicosane (B18C6), as a consequence of the increased hydrophobic character with respect to 18C6, interacts with DTAB hydrocarbon chains and partially localizes in the inner part of micelles. This finding has been successfully used to justify the higher amount of B18C6 compared to the 18C6 one found in the SDS micellar phase. The substituted crown ether has been found localized both on the micelle surface via complex formation and in the inner part of micelles as a consequence of the increased hydrophobic character. For all systems, the aggregate size primarily decreases with the amount of macrocycle in the micellar phase. The interpretation of cmc trends as a function ofmacrocycle concentration gives information on its distribution between micellar and aqueous phases that is in line with SANS results.     

Hydrosilylation of alkynes with a cationic rhodium species formed in an anionic micellar system

[reaction: see text] Rhodium-catalyzed hydrosilylation of alkynes in an aqueous micellar system has been developed. A combination of [RhCl(nbd)](2) and bis(diphenylphosphino)propane (dppp) effects (E)-selective hydrosilylation in the presence of sodium dodecyl sulfate (SDS) in water. The (E)-selectivity strongly indicates the formation of a cationic rhodium species via dissociation of the Rh-Cl bond by the action of anionic micelles. The addition of sodium iodide provided (Z)-alkenylsilanes predominantly.     

Surfactant chain-length-dependent modulation of the prototropic transformation of a biological photosensitizer: norharmane in anionic micelles

A photophysical study of norharmane (NHM), an efficient cancer cell photosensitizer, has been undertaken in well-characterized biomimetic micellar nanocavities formed by anionic surfactants of varying chain length, namely, sodium decyl sulfate (S10S), sodium dodecyl sulfate (S12S), and sodium tetradecyl sulfate (S14S), using steady-state and time-resolved fluorescence spectroscopy. The effect of the hydrophobic chain length on the structural dynamism of the fluorophore has been reported. Experimental results demonstrate that the equilibrium of this dynamism is sensitive to the environment. Variation in the surfactant chain length plays an important role in promoting a specific prototropic form of the probe molecule. A striking feature of the present study is that an increase in the surfactant chain length (hydrophobicity) favors the cationic species of NHM. This has been rationalized on the basis of changes in the local pH and the aggregation number of the micelles. A fluorescence quenching study of the micelle-bound probe using ionic quencher Cu2+ corroborates this.     

Hydrogen-bonded inclusion compounds with reversed polarity: anionic metal-complexes and cationic organic linkers

Synthesized and structurally characterized is a new series of soft-host frameworks assembled by charge-assisted hydrogen bonds between an anionic metal complex (MC) and cationic organic linkers (OL), specifically [Co(en)(ox)(2)](-) and diprotonated 4,4'-bipyridinium (H(2)bpy) or 1,2-bis(4-pyridinium)ethylene (H(2)bpye). While frameworks built of cationic complexes and anionic organic linkers are already well-known, the seven new compounds described here represent the first series of frameworks with reversed polarity, that is, made of anionic complexes and cationic organic linkers. The compounds have a general formula [OL][MC](2)·n(guest), where the guest molecules 4,4'-biphenol (bp), 4-methoxyphenol (mp), 1,4-dimethoxybenzene (dmb), 1,6-dimethoxynaphtalene (dmn), and 4-nitroanisole (na). Structurally the compounds can be described as pillared-layer frameworks with layers constructed of MC anions and linked together by hydrogen-bonded cationic OL pillars. The guest molecules occupy the galleries between the pillars while their steric, electronic, and π-π and hydrogen-bonding capabilities influence the overall structure of the soft frameworks.     

Photophysics of melatonin in different environments

Melatonin (N-acetyl-5-methoxytryptamine) is a naturally occurring hormone with a structural resemblance to tryptophan. Its fluorescence is solvent dependent and strongly quenched in the presence of oxygen. Fluorescence quenching in aqueous and organic solutions have been studied in the presence of different quenchers. A 1: 1 inclusion complex formation between melatonin and different cyclodextrins in aqueous solution has been observed. The effects of microheterogeneous media provided by cyclodextrins, micelles and reverse micelles on the fluorescence characteristics of melatonin have been investigated. The water-soluble inorganic quenchers like KBr and KI were unable to quench the fluorescence of melatonin dissolved in a microemulsion consisting of surfactant + cyclohexane + 1-propanol + water, whereas the organic quenchers like CCl4 and CHCl3 were able to quench the fluorescence with a rate constant (on the order of 10(8) dm3 mol-1 s-1) quite similar to that in neat organic solvents.     

Kinetic study in water-ethylene glycol cationic, zwitterionic, nonionic, and anionic micellar solutions

The spontaneous hydrolysis of phenyl chloroformate was studied in water-ethylene glycol, EG, cationic, zwitterionic, nonionic, and anionic micellar solutions, the surfactants being tetradecyltrimethylammonium bromide, tetradecyl-N,N-dimethyl-3-ammonio-1-propanesulfonate, tricosaoxyethylene glycol ether, and sodium dodecyl sulfate. The dependence of the observed rate constant on surfactant concentration as well as on the percentage by weight of EG, varying from 0 to 50 wt %, was investigated. Information about changes in the critical micelle concentrations, in the micellar ionization degrees (for ionic surfactants), in the aggregation numbers, and in the polarity of the interfacial region of the micelles upon changing the weight percent of EG was obtained through conductivity, surface tension, spectroscopic, and fluorescence measurements. A simple pseudophase model was adequate to rationalize the kinetic data. Micellar medium effects were explained by considering charge-charge interactions and polarity, ionic strength, and water content in the micellar interfacial region. The acceleration of the reaction produced by an increase in the amount of EG present in the mixture was explained on the basis of the substantial decrease in the equilibrium binding constant of phenyl chloroformate molecules to the micelles, resulting in the contribution of the reaction taking place in the bulk water-EG phase being more important. The weight percent of EG did not substantially influence the rate constant in the micellar pseudophase.     

Mixed micellar properties of cationic trimeric-type quaternary ammonium salts and anionic sodium n-octyl sulfate surfactants

The properties of quaternary ammonium salt-type cationic trimeric surfactants (m-2-m-2-m, m represents the carbon atom number in alkyl chain lengths of 8, 10, and 12) and oppositely charged anionic monomeric surfactant, sodium n-octyl sulfate (SOS), were characterized by employing several techniques such as static surface tension, fluorescence spectroscopy, and dynamic light-scattering measurements. The critical micelle concentrations (cmc) of m-2-m-2-m were much lower than those of the corresponding dimeric and monomeric surfactants, and decreased with increasing chain length. The addition of SOS to m-2-m-2-m solutions resulted in a further decrease of the cmc. The mixed surfactants showed higher efficiencies in lowering the surface tension than the individual surfactants. The fluorescence measurements suggested the formation of mixed micelles with a hydrophobic environment in the solutions even at lower concentrations. The dynamic light-scattering study indicated the presence of two different kinds of aggregates with different hydrodynamic diameters. The larger one was attributed to the mixed micelle of m-2-m-2-m and SOS. These results indicated a decline of the electrostatic repulsion between cationic head groups through the incorporation of anionic surfactant into the mixed surfactants.     

Effect of surfactant chain length on the binding interaction of a biological photosensitizer with cationic micelles

Steady-state and time-resolved fluorometric techniques have been exploited to study the photophysical and distribution behavior of an efficient cancer cell photosensitizer, norharmane (NHM), in well-characterized, biomimicking nanocavities formed by cationic micelles with varying surfactant chain length. Amphiphiles like dodecyl trimethyl ammonium bromide (DTAB), tetradecyl trimethyl ammonium bromide (TTAB), and cetyl trimethyl ammonium bromide (CTAB) have been used for the purpose. Emission behavior of NHM is very much dependent on the surfactant concentration as well as their hydrophobic chain length. The binding constant (K) and free-energy change (DeltaG) for the interaction of NHM with the cationic micelles have been determined from the fluorescence data. Polarity of the microenvironment around the probe has been determined in the cationic micellar environments from a comparison of the variation of fluorescence properties of the two-prototropic species of the probe in water/dioxane mixture with varying composition. Experimental results demonstrate that the variation in the cationic surfactant chain length plays an important role in promoting a specific prototropic form of the probe molecule. Fluorescence decays are biexponential in all the micelles indicating that the probe molecules are distributed between the two distinct regions of the micelles. The population of the component with a longer lifetime corresponds to the probe in the head group site, while the short-lived component comes from the probe bound to the core region of the micelles. On the basis of the lifetime measurements, the partitioning behavior of the chromophore in the head group and in the core regions in the micelles has been determined.     

Phenyl-ring-bearing cationic surfactants: effect of ring location on the micellar structure

A series of isomeric cationic surfactants (S1-S5) bearing a long alkyl chain that carries a 1,4-phenylene unit and a trimethyl ammonium headgroup was synthesized; the location of the phenyl ring within the alkyl tail was varied in an effort to understand its influence on the amphiphilic properties of the surfactants. The cmc's of the surfactants were estimated using ionic conductivity measurements and isothermal calorimetric titrations (ITC); the values obtained by the two methods were found to be in excellent agreement. The ITC measurements provided additional insight into the various thermodynamic parameters associated with the micellization process. Although all five surfactants have exactly the same molecular formula, their micellar properties were seen to vary dramatically depending on the location of the phenyl ring; the cmc was seen to decrease by almost an order of magnitude when the phenyl ring was moved from the tail end (cmc of S1 is 23 mM) to the headgroup region (cmc of S5 is 3 mM). In all cases, the enthalpy of micellization was negative but the entropy of micellization was positive, suggesting that in all of these systems the formation of micelles is both enthalpically and entropically favored. As expected, the decrease in cmc values upon moving the phenyl ring from the tail end to the headgroup region is accompanied by an increase in the thermodynamic driving force (ΔG) for micellization. To understand further the differences in the micellar structure of these surfactants, small-angle neutron scattering (SANS) measurements were carried out; these measurements reveal that the aggregation number of the micelles increases as the cmc decreases. This increase in the aggregation number is also accompanied by an increase in the asphericity of the micellar aggregate and a decrease in the fractional charge. Geometric packing arguments are presented to account for these changes in aggregation behavior as a function of phenyl ring location.     

Adsorption of anionic and cationic surfactants on anionic colloids: supercharging and destabilization

We present herein a study on the adsorption of anionic (SDS), cationic (CTAB), and nonionic (C(12)E(5)) surfactants onto anionic silica nanoparticles. The effects of this adsorption are studied by means of the static structure factor, S(q), and the collective diffusion coefficient, D(c), obtained from small-angle X-ray scattering and dynamic light scattering measurements, respectively. The effective charge on the particles was determined also from classical electrophoresis and electroacoustic sonic-amplitude measurements. The surface tension of the sample was also investigated. Of particular note is the adsorption of SDS onto the silica nanoparticles, which leads to supercharging of the interface. This has interesting repercussions for structures obtained by the layer-by-layer (LbL) technique, because emulsions stabilized with supercharged and hydrophobized silica are perfect candidates for use in a multilayer system.     

Titrations of sulphonamides in cationic micellar systems

A titrimetric determination of some sulphonamides with 0.1 M sodium hydroxide in the presence of hexadecylpyridinium chloride is described. Potentiometric titrations are slow; visual titrations are satisfactory. The pK_a shift can be interpreted in the light of general micellar behaviour.     

Photophysics of norharmane in solution phase: From homogeneous to microheterogeneous environments

The photobehavior of norharmane (9H-pyrido[3,4-b]-indole) (NHM), one of the vastly used skeleton of drugs in therapeutic applications, has recently been the subject of increasing interest due to the finding of their phototoxic and photocarcinogenic properties. Its absorption and fluorescence behavior from different prototropic species show remarkable sensitivity towards the polarity, viscosity and local pH, exhibited by various microheterogeneous bio and biomimetic environments like micelles, reverse micelles, proteins, etc. The significant results obtained for NHM in homogeneous and a series of microheterogeneous environments is reviewed in this account. Much attention has been given to the properties of the excited states, location and biodistribution of NHM in different biological environments. The results can help in understanding the photophysics of the probe in biological environments and in assessing the correlation between different prototropic forms and biological activity.     

Ion decontamination with a mixture of cationic and anionic surfactants

The composition of mixed micelles and mixed micelle — solution interfaces changes with the concentration and molar ratio of the cationic and anionic surfactants present. The micelle — solution interface includes besides the headgroups of both surfactants, the counterions of the surfactant in excess. The finding of an enhanced binding of counterions to mixed micelles may be of some practical importance in decontamination.     

Binary mixtures of cationic and anionic microgels

Colloidal behaviors of binary mixtures composed of cationic and anionic microgels are reported. Both microgels were synthesized by aqueous free radical precipitation polymerization using N-isopropylacrylamide and N,N'-methylenebisacrylamide but using different types of water-soluble initiators and comonomer. Effects of temperature and salt concentration on phase behaviors of binary mixtures of cationic and anionic microgels were investigated as well as single-species microgels by UV-vis spectroscopy. We found that the presence of a small amount of NaCl altered the dispersing behavior of the binary mixtures of cationic and anionic microgels when they were in hydrated and swollen states. In particular, scanning electron microscope observation clarified that the binary mixtures containing a small amount of NaCl were not flocculated, and microgels showed non-close-packed structures on a planar substrate in the dry state. Furthermore, flocculations formed when both microgels were in the swollen states could be redispersed by adding a small amount of NaCl and gently stirring. These tunable properties have not been observed in mixtures of hard particles, and are due to the coexistence of electrostatic interactions and steric hindrance of highly hydrated soft particles.     

Interactions of temperature-responsive anionic polyelectrolytes with a cationic surfactant

The interactions of temperature-responsive copolymers of sodium 2-acrylamido-2-methyl-1-propanesulfonate (AMPS) and N-isopropylacrylamide (NIPAM) with a cationic surfactant, dodecyltrimethylammonium chloride (DTAC), have been studied. The content of AMPS in the copolymers ranged from 1.1 to 9.6 mol%. The surface activity was higher for the polymers with lower AMPS content. It was found that DTAC undergoes association with the polymer chain, forming mixed polymer-surfactant micelles. The values of cac for the polymers were found in fluorescence studies using pyrene as the fluorescent probe. They were in the range 0.9-3.6x10(-3) M and were lower for polymers with higher AMPS content. An increase in DTAC concentration up to about its cmc results in a decrease of the LCST (lower critical solution temperature) of the copolymers, while further increase above the cmc results in an increase of the LCST. The minimum value of LCST in the presence of the surfactant is lower than the LCST of NIPAM homopolymer.     

Photocatalytic hydrogen generation using a protein-coated photosensitizer with anionic patches and a monocationic electron mediator

A reconstituted myoglobin with a synthetic cofactor having anionic binding sites effectively works as a photocatalyst for hydrogen generation in the presence of monomethylated bipyridinium.     

Hydrophobic effect for anionic dye - cationic surfactant interaction in aqueous and mixed solvent

Abstract

The interaction between anionic dyes [Reactive Orange 122 (R.O 122), Reactive Blue 19 (R.B 19), Reactive Violet 5 (R.V 5) and Acid Green 20 (A.G 20)] with cationic surfactant cetyltrimethylammoniun bromide (CTAB) has been investigated by spectrophotometry and conductance technique. The used dyes are characterized by tautomeric behavior which affects the mechanism of the interaction. Various parameters such as dye structure, surfactant composition, solvent composition, temperature and pH of the medium were studied. The spectral data were applied for calculating the binding constant between dye and surfactant (K_b), fraction of micellization (?_mic), and standard free energy change of binding (ΔG°_b) in 0,10,20 and 30 v/v % acetonitile (AN). Conductance technique was constructed to estimate the ion pairing constant (K_a) at different temperatures and v/v % AN. Thermodynamic parameters (ΔG°, ΔH° and ΔS°) for ion pair formation were evaluated. The role of hydrophobic and electrostatic effect on dye-surfactant interaction was discussed.