Enthalpies of Solution of L–L- and D–D- Isomers of Valine in Aqueous Alkanols at 298.15 K

The enthalpies of solution of L- and D-valines in water-ethanol, water-n-propanol, and water-i-propanol mixtures were measured calorimetrically at 298.15 K at alcohol mole fractions, x ₂, ranging up to 0.4. Enthalpies of transfer, Δ_tr H°, from water to aqueous alkanol were calculated for each of the system studied. The enthalpic coefficients, h _xy , of the solute-cosolvent pair-wise interaction in water proved to be positive and increasing in the series: ethanol, n-propanol, and i-propanol. It was shown that both the nature of the amino acid L–L- and D–D-isomerization and dimensions of linear or branched cosolvent molecules define the energetics of interaction between valine and alkanol molecules.     

Volumetric Properties of Aqueous Solutions of L-Glutamic Acid and Magnesium-L-Glutamate

Densities of aqueous solutions of L-glutamic acid and magnesium-L-glutamate were determined from T=288.15 to 333.15 K at 5 K temperature intervals. The measured densities were used to evaluate the apparent molar volumes, V _2,φ (m,T), the cubic expansion coefficients, α(m,T), and the changes of isobaric heat capacities with respect to pressure, (∂ C _p /∂ p) _T,m . They were qualitatively correlated with changes in the structure of water that occur when L-glutamic acid or magnesium-L-glutamate are present.     

Synthesis Characterization and Viscosity Studies of Homopolymer of Methyl Methacrylate and Copolymer of Methyl Methacrylate and Styrene

A homopolymer of methyl methacrylate (MMA) and its copolymer with styrene at different compositions were synthesized and characterized. Viscosity measurements of the synthesized homopolymer and the copolymers in toluene solutions were performed at 313 K. Different equations were used to calculate the intrinsic viscosity, viscometric constants values, and molecular weight of the synthesized polymers. The values of intrinsic viscosity and viscosity average molecular weight obtained by the two methods (single point determination and graphical extrapolation) were compared in order to verify the validity of the single point determination for the polymers. Viscometric properties derived included the specific viscosity (it determines the contribution of the solute to the viscosity of the solution), the reduced viscosity (that provides a measure of the polymer capacity for increasing the solution viscosity), and the intrinsic viscosity.     

Measurement of Magnesium Stability Constants of Biologically Relevant Ligands by Simultaneous Use of pH and Ion-Selective Electrodes

Simultaneous measurements with magnesium ion-selective and pH glass electrodes have been used for determination of the stability constants of magnesium ions with various biologically relevant ligands by alkalimetric titration under physiological conditions (37^○C, I=0.15 mol⋅dm⁻³). New systems were investigated: magnesium with pyroglutamate, pyridoxine and HEPES, along with citrate, lactate, glycinate, aspartate and glutamate. For comparison, calcium stability constants with the same ligands were determined similarly, using calcium ion-selective and pH glass electrodes. Ligand protonation constants, necessary for the calculation of the metal complex formation constants, were also determined.     

Molecularly imprinted adsorbents for preconcentration and isolation of progesterone and testosterone by solid phase extraction combined with HPLC

The use of a novel procedure of solid-phase extraction with molecularly imprinted polymers (MISPE) has been described. A MISPE procedure relying on tailor-made, artificial-mimic materials capable of selectively rebinding target analytes (steroids) based on a combination of recognition mechanisms, such as size, shape and functionality, was custom designed for progesterone and testosterone. The combination of MISPE with LC/DAD is a simple and an efficient method for the determination and quality control of progesterone and testosterone in human urine samples.     

Development and Validation of a Column-Switching LC–ESI–MS Assay for Determination of Huperzine A in Rat Plasma and Cerebrospinal Fluid

A simple and rapid method using liquid chromatography-mass spectrometry was developed and applied to determine the concentration of huperzine A in rat plasma or cerebrospinal fluid following a single intravenous injection or nasal administration. The chromatographic separation of the analytes was performed by column switching. A Zorbax SB-C₁₈ pre-column was used as the first column for sample clean-up, and then the analytes were eluted onto a Zorbax SB-C₁₈ column, the second column, and detected by electrospray ionization MS using single ion monitoring in positive mode. Hup B was used as internal standard. Linear calibration curve was achieved over a dynamic range of 0.5–500 ng mL^?1 for Hup A in plasma sample and 0.5–200 ng mL^?1 in CSF sample. The inter- and intra-assay coefficients of variation for the analysis were within ±6.67%. The mean absolute recoveries of Hup A from plasma were between 94.7 and 106.7%.     

Stability and Coordination Mode of Complexes of Polyphosphates and Polymetaphosphates with Copper(II) Ions in Aqueous Solution—Potentiometric,Spectral and Theoretical Studies

Complexes of copper(II) with a number of polyphosphate and polymetaphosphate anions have been studied in aqueous solutions by potentiometric, spectroscopic and theoretical methods. Stability constants of the complexes have been determined as well as their coordination modes. Results of the equilibrium studies provided evidence for the formation of ML, MHL and ML(OH) _x type complexes with the ligands studied. The length of the polyphosphate chain was found to affect the oxygen atom charge that is reflected in the stability constants of the ML type complexes. Moreover, the stability of the complex is also influenced by the spatial arrangement of the phosphate groups in phosphates and metaphosphates. The spectral parameters observed for certain complexes have permitted us to deduce the inner coordination sphere of the studied complexes.     

Adsorption properties of BEA zeolites and their aluminum phosphate extrudates for purification of isomaltose

The disaccharide isomaltose is produced via an enzymatic reaction and is adsorbed to BEA zeolite. This reaction integrated adsorption can be achieved as fluidized bed as well as fixed bed. We investigated isotherms, adsorption enthalpies and sorption kinetics of BEA zeolite and extrudates with a novel aluminum phosphate sintermatrix. These extrudates contain 50% (w/w) of BEA 150 zeolites (Si/Al = 75) as primary crystals. BET-surface for extrudates is 245 m²⋅g⁻¹ and 487 m²⋅g⁻¹ for zeolite. Extrudates show a monomodal macropore structure with a maximum at 90 nm. All isotherms show a type I shape. For lower equilibrium concentrations, which occur during the enzymatic reaction, Henry’s law is applied and compared to a Langmuir model. Adsorption equilibrium constant K _i,L calculated from Langmuir for extrudates at 4 °C is 64.7 mL⋅g⁻¹ and more than twice as high as obtained from Henry’s law with K _i is 26.8 mL⋅g⁻¹. Adsorption on extrudates at 4 °C is much stronger than on zeolite crystals where the Henry coefficient K _i is 17.1 mL⋅g⁻¹. Adsorption enthalpy Δh _Ad calculated from van’t Hoff plot with the Henry equation is −44.3 kJ⋅mol⁻¹ for extrudates and −29.6 kJ⋅mol⁻¹ for zeolite crystals. Finally, the kinetics for ad- and desorption were calculated from the initial slope. The diffusion rate for ad- and desorption on extrudates were in the same range while adsorption on zeolites is three orders of magnitudes faster than desorption.     

Temperature Dependence of Physical Properties of Imidazolium Based Ionic Liquids: Internal Pressure and Molar Refraction

Density, speed of sound and refractive index of the imidazolium-based ionic liquids (ILs), 1-methyl-3-octylimidazolium chloride [C₈mim][Cl], 1-butyl-3-methylimidazolium methyl sulfate [C₄mim][C₁OSO₃], and 1-butyl-3-methylimidazolium octyl sulfate [C₄mim][C₈OSO₃], have been measured in the temperature range from 283.15 to 343.15 K. Experimental density and speed of sound have been used to calculate the internal pressure p _i of the ILs. The p _i values were found to be higher than those of water and molecular organic liquids, but lower than those of classical molten salts. We also calculated molar refraction R _M from the measured refractive index n _D in the temperature range from 288.15 to 343.15 K. Refractive indices of ILs were also higher than those of normal organic liquids, but comparable to long-chain hydrocarbon organic solvents. The structure-property correlation of the ILs has been discussed and the results have been compared to our earlier studies (Kumar in J. Solution Chem. 37:203–214, 2008).     

Loss of 45 Da from a<Subscript>2</Subscript> Ions and Preferential Loss of 48 Da from a<Subscript>2</Subscript> Ions Containing Methionine in Peptide Ion Tandem Mass Spectra

While analyzing tandem mass spectra of tryptic tripeptides, intense unassigned peaks were observed, corresponding to neutral loss of 45 Da from a₂ ions. This process was confirmed by MS³ experiments. Based on exact mass analysis, the loss was ascribed to (NH₃ + CO) or formamide. The proposed mechanism involves a cyclic form of the a₂ ions. The structure of the a₂ − 45 ions was confirmed by their fragmentation in MS³ experiments. Loss of (NH₃ + CO) from the a₂ ions occurs in competition with other paths, such as the loss of H₂O or the formation of immonium ions. However, if the a₂ ion contains methionine, a neutral loss of 48 Da (ascribed to CH₃SH) predominates, and is followed by the loss of (NH₃ + CO). These processes were confirmed by MS³ experiments. The intensity of the a₂ − 48 peak formed from XaaMet has a maximum value of 42% (of the total intensity of all ions) for Xaa=Gly, varies between 15% and 40% for most other Xaa residues, is lower for residues that can undergo loss of water or ammonia, and is very low for Lys or Arg. When the order of the residues is reversed to MetXaa, the loss of 48 Da is much smaller. This effect can be used to determine the sequence of b₂ ions containing Met in proteomic studies. Considerable loss of CH₃SH is observed from doubly protonated tryptic tripeptides with N-terminal Met, but the loss is much less when they are singly protonated or when Met is in the center position.     

Effect of Ionic Strength and Temperature on the Protonation of Oxidized Glutathione

The protonation constants for oxidized glutathione, H _i−1L^(4−i+1)−, K _i ^H=[H _i L⁽⁴⁻ⁱ⁾⁻]/[H _i−1L^(4−i+1)−][H⁺] i=1,2,…,6 have been measured at 5, 25 and 45 °C as a function of the ionic strength (0.1 to 5.4 mol⋅[kg(H₂O)]⁻¹) in NaCl solutions. The effect of ionic strength on the measured protonation constants has been used to determine the thermodynamic values (K _i ^H0) and the enthalpy (ΔH _i ) for the dissociation reaction using the SIT model and Pitzer equations. The SIT (ε) and Pitzer parameters (β ⁽⁰⁾, β ⁽¹⁾ and C) for the dissociation products (L⁴⁻, HL³⁻, H₂L²⁻, H₃L⁻, H₄L, H₅L⁺, H₆L²⁺) have been determined as a function of temperature. These results can be used to examine the effect of ionic strength and temperature on glutathione in aqueous solutions with NaCl as the major component (body fluids, seawater and brines).     

Thermal and quality evaluation of vegetable oils used in ruminant feed

Dairies add fat supplements to the diets of small ruminants to increase energy production and consequently the production and quality nutritional and sensorial of the milk. This study investigated the thermal and oxidative stability of babassu, castor, faveleira, and sesame oils by TG/DTA and PDSC. The profile of the fatty oils studied was determined by GC–MS as well as physicochemical characteristics. The thermogravimetric profile of the oils indicated that mass loss was caused by the decomposition or volatility of the triacylglycerides. Faveleira and sesame oils showed a high percentage of polyunsaturated fatty acids, especially C18:2. From a nutritional standpoint, unsaturated oils are more suitable supplements for animals because they promote biochemical changes beneficial to human health.     

Validation and application of sub-2 μm core–shell UHPLC–UV–ESI–Orbitrap MS for identification and quantification of β-carotene and selected cleavage products with preceding solid-phase extraction

A validated ultrahigh-performance liquid chromatography method using 1.7 μm core–shell particles is presented for the identification and quantification of β-carotene (BC) and related cleavage products (CPs) in primary cell culture media. Besides BC, apo-4′-, apo-8′-, apo-10′-, and apo-12′-carotenals, as well as 5,6-epoxy-β-carotene, were selected as target analytes. Detection was performed via an 80-Hz diode array detector and an electrospray ionization–linear quadrupole ion trap–Orbitrap XL mass spectrometer, both hyphenated in series. Total analysis time was below 6 min with peak widths <12 s. Addition of trifluoroacetic acid and tetrahydrofuran to the mobile phase allowed for the mass spectrometric detection of BC and related CPs and reduced peak tailing due to improved solubility of hydrophobic analytes. Intra-day and inter-day precision for UV and mass spectrometric detection were ≤1.5 % for retention times and ≤5.1 % for peak areas. Instrumental linearity was confirmed by Mandel’s fitting test between 0.25 (or 1.00 μg/mL) and 5.00 μg/mL for UV detection. The higher sensitivity of mass spectrometric detection allowed for the coverage of three concentration domains between 0.025 and 5.00 μg/mL in linearity testing. Homoscedasticity was confirmed between 0.10 and 5.00 μg/mL for Orbitrap XL MS. The limits of quantification were between 52.6 and 889.4 ng/mL for UV detection and between 19.3 and 102.4 ng/L for mass spectrometric detection. Offline solid-phase extraction from culture media fortified with BC and CPs provided intra- and inter-day recoveries between 65.8 and 102.4 % with coefficients of variation ≤6.2 %. Primary rat hepatocyte cultures treated with BC and subjected to different oxidative stress conditions contained 5,6-epoxy-BC and apo-4′-carotenal besides residual BC. Apparently, 5,6-epoxy-BC was formed in the medium via autoxidation of BC by ambient oxygen.     

Ultrasonic Velocities,Densities, and Refractive Indices of Binary Mixtures of Polyethylene Glycol 250 Dimethyl Ether with 1-Propanol and with 1-Butanol

Measurements of the ultrasonic velocity (u), density (ρ) and refractive index (n) for binary mixtures of polyethylene glycol 250 dimethyl ether with 1-propanol and 1-butanol have been made at three temperatures (T=293, 303 and 31 K) over the entire composition range in order to investigate the nature of intermolecular interactions between the components of these liquid mixtures. Various excess thermodynamic properties such as the excess ultrasonic velocity (Δu), deviation in isentropic compressibility (Δk _S ), excess intermolecular free length (L_f^E)(L_{\mathrm{f}}^{\mathrm{E}}), excess acoustic impedance (Z ^E), excess pseudo-Grüneisen parameter (Γ ^E), and molar refraction deviation (ΔR _m) were calculated using experimental values of the ultrasonic velocity, density and refractive index and were then represented with the Redlich-Kister polynomial equation. The observed excess deviation parameter values were explained on the basis of the strength of intermolecular interactions between the components of the mixtures. Estimations of the refractive index and ultrasonic velocity have also been made using various empirical relations and are discussed in terms of the average percentage deviations (APD).     

The synthesis and characterisation of novel dimethyl- and diphenyl-silanediolates

Dimethyl- and diphenylsilanediolates are key intermediates in the preparation of dimethyl- and diphenyl-siloxane polymers. Both dimethyl- and diphenylsilanediolates R₂Si(OM)₂, where R = Me or Ph, and M = Li, Na and K were synthesised by the reaction between dimethyl- and diphenylsilanediol and a metal or metal hydride (M/MH where M = Li, Na and K). The silanediolates were characterised by ²⁹Si, ¹³C and ¹H NMR, FTIR and mass spectroscopy.     

Conductance of Dilute Hydrochloric Acid Solutions to 458 K and 1.4 MPa

Electrical conductance measurements were made on dilute solutions of hydrochloric acid to 458 K and 1.4 MPa with a flow instrument. These measurements agree well with those of previous authors. The conductance theory of Fuoss and Hsia as given by Fernandez-Prini (FHFP), was fit to these measurements. It was found that this theory adequately described the present results with a single parameter, the limiting conductance at infinite dilution Λ°(HCl). Within their estimated accuracy, reported literature results of Λ°(HCl) between 264.15 and 579 K and high pressures were found to be represented by a five-parameter equation that was a function of the solvent viscosity, temperature and pressure. This equation along with the FHFP theory permits accurate calculation of the conductance of dilute hydrochloric acid solutions at high temperatures and pressures. Electronic Supplementary Material  The online version of this article () contains supplementary material, which is available to authorized users.     

Magnesiation of N-Heterocycles Using i-PrMgCl · LiCl and Catalytic Diisopropylamine

The direct magnesiation of various N-heterocyclic compounds with i-PrMgCl · LiCl and catalytic diisopropylamine allows for preparation of 2-substituted pyrroles, imidazole, indoles, and benzimidazoles, in moderate to good yields. The magnesiated substrates canreadily undergo a Kumada-type coupling with iodo-aryls in the presence of catalytic Pd(PPh₃)₄.     

Influence of Europium speciation on its accumulation in Brassica napus and over-expressing BnTR1 lines

This study aimed at influence of europium speciation on its accumulation in Brassica napus (CK) and over-expressing BnTR1 lines (OE), and the kinetics of Eu uptake were investigated. These results indicated that the uptake in the roots of OE was higher than that of CK at high concentrations of europium and even the enrichment in the roots of OE was as high as 20,000 mg/kg at 328.9 μΜ Eu, this suggested that OE might have better resistance to uranium than CK. The time kinetics in plants showed that there had the similar trend between CK and OE. The formation of Eu³⁺at pH 5 in deionized water was beneficial to plants enrichment Eu and carbonate could reduce the adsorption of Eu in two group and phosphate almost completely impress the adsorption of Eu in two group, but citric acid could enhance europium root-to-shoot translocation in two group. These results would help understanding the mechanism of Eu uptake in Brassica napus (CK) and over-expressing BnTR1 lines (OE), therefore properly developing efficient europium/americium phytoremediation.     

Volumetric Study of Aqueous Solutions of Polyethylene Glycol as a Function of the Polymer Molar Mass in the Temperature Range 283.15 to 313.15 K and 0.1 MPa

Density measurements were made for binary aqueous solutions of polyethylene glycol at seven temperatures: 283.15, 288.15, 293.15, 298.15, 303.15, 308.15, and 313.15 K. Polyethylene glycol samples with nominal average molar masses of 3000 g⋅mol⁻¹ (PEG 3000), 6000 g⋅mol⁻¹ (PEG 6000), 10000 g⋅mol⁻¹ (PEG 10000) and 20000 g⋅mol⁻¹ (PEG 20000) were used. These results were used to determine the specific volumes of solutions with solute-to-solvent mass ratios (mass of the solute/mass of the solvent) in the range 0.0546 to 1.4932 for PEG 3000, from 0.0553 to 1.4986 for PEG 6000, from 0.0552 to 1.2241 for PEG 10000, and from 0.0530 to 1.2264 for PEG 20000. The differences between the specific volume of a solution and the specific volume of the pure solvent, at a given temperature, were represented by a virial-type equation in terms of solute concentration. The first-order coefficient of the expansion is the partial specific volume of the solute at infinite dilution. The higher-order coefficients are related to the contribution of pairs, triplets, and higher-order solute aggregates, according to the Constant-Pressure Solution Theory. The functional dependence of the virial coefficients upon temperature is discussed in terms of solute-solute and solute-solvent interactions. The effect of the PEG molar mass on the partial specific volume of solute at infinite dilution, as well as the contributions of pairs of solute molecules to the solution volume, are also investigated. The apparent specific volume, apparent specific expansibility, apparent specific expansibility at infinite dilution and virial coefficients of the apparent specific expansibility are also presented.