Nanomaterial-based electrochemical DNA sensing strategies

DNA sensing strategies have recently been varieted with the number of attempts at the development of different biosensor devices based on nanomaterials, which will further become DNA microchip systems. The investigations at the side of material science in connection with electrochemical biosensors open new directions for detection of specific gene sequences, and nucleic acid-ligand interactions.An overview is reported here about nanomaterial-based electrochemical DNA sensing strategies principally performed for the analysis of specific DNA sequences and the quantification of nucleic acids. Important features of electrochemical DNA sensing strategies, along with new developments based on nanomaterials are described and discussed.     

Nanomaterial-based electrochemical sensing of neurological drugs and neurotransmitters

Microchimica Acta - Nanomaterial-modified detection systems represent a chief driver towards the adoption of electrochemical methods, since nanomaterials enable functional tunability, ability to...     

Synthesis of copper nanorods for non-enzymatic amperometric sensing of glucose

An electrochemical non-enzymatic glucose sensor based on copper nanorods (CuNRs) was developed. The CuNRs were characterized by scanning electron microscopy, transmission electron microscopy, X-ray diffraction spectroscopy, and X-ray photoelectron spectroscopy. The results display a layer of rough cuprous oxide that is formed on the surface of CuNRs. The CuNR- modified glassy carbon electrode exhibits an outstanding capability in terms of nonenzymatic sensing of glucose. The sensor displays high sensitivity (1490 μA?mM^?1?cm^?2), fast response time (less than 5 s), a low detection limit of 8 nM (S/N = 3), long term stability, and excellent anti-fouling ability. The sensor was applied to the detection of glucose in (spiked) human serum and in black ice tea, with relative standard deviations (for n = 6) of 1.7 % and 1.9 %, respectively.

Open image in new window

Graphical abstract The surface of Cu nanorods was covered with cuprous oxide, which increased the surface area of the nanorods and provided more catalytic active sites for the electro-oxidation of glucose. Good linearity and selectivity were obtained in glucose sensing.

     

A nanoporous ruthenium oxide framework for amperometric sensing of glucose and potentiometric sensing of pH

We report on a carbon ionic liquid electrode modified with a composite made from Nafion, graphene oxide and ionic liquid, and its application to the sensitive determination of rutin. The modified electrode was characterized by cyclic voltammetry and electrochemical impedance spectroscopy. It shows excellent cyclic voltammetric and differential pulse voltammetric performance due to the presence of nanoscale graphene oxide and the ionic liquid, and their interaction. A pair of well-defined redox peaks of rutin appears at pH 3.0, and the reduction peak current is linearly related to its concentration in the range from 0.08 μM to 0.1 mM with a detection limit of 0.016 μM (at 3σ). The modified electrode displays excellent selectivity and good stability, and was successfully applied to the determination of rutin in tablets with good recovery.

Polythiophenes and polythiophene-based composites in amperometric sensing

This overview of polythiophene-based materials provides a critical examination of meaningful examples of applications of similar electrode materials in electroanalysis. The advantages arising from the use of polythiophene derivatives in such an applicative context is discussed by considering the organic conductive material as such, and as one of the components of hybrid materials. The rationale at the basis of the combination of two or even more individual components into a hybrid material is discussed with reference to the active electrode processes and the consequent possible improvements of the electroanalytical performance. In this respect, study cases are presented considering different analytes chosen among those that are most frequently reported within the classes of organics and inorganics. The use of a polythiophene matrix to stably fix biological elements at the electrode surface for the development of catalytic biosensors and genosensors is also discussed. Finally, a few possible lines along which the next research in the field could be fruitfully pursued are outlined. Furthermore, the work still to be done to exploit the possibilities offered by novel products of organic synthesis, even along paths already traced in other fields of electrochemistry, is discussed.

Au nanoparticle decorated silicate network for the amperometric sensing of isoniazid

Au nanoparticle (nAu) based electrochemical platform for the amperometric sensing of isoniazid at sub-nanomolar level is developed. The sol-gel derived 3-dimensional silicate network pre-assembled on a conducting substrate is chemically decorated with nAu of 70-100 nm by seed-mediated growth approach. The Au nanoseeds are first chemisorbed onto the thiol functional groups of the silicate network and their size was enlarged by hydroxylamine seeding. The nanoparticles efficiently catalyze the oxidation of isoniazid at less positive potential. Large decrease in the overpotential and significant enhancement in the anodic peak current with respect to the polycrystalline Au electrode are observed. The nanoparticle based platform is highly sensitive (4.03 ± 0.01 nA/nM) and it linearly responds to isoniazid up to the concentration of 1 mM. It could detect as low as 0.1 nM (S/N = 5) of isoniazid at the potential of 10 mV in aqueous solution without any redox mediator. The catalytic response of the sensing platform depends on the amount of nanoparticles loaded onto the silicate network. Very interestingly, the sensing platform could simultaneously detect isoniazid and hydrazine in their coexistence without compromising the sensitivity. Well separated individual voltammetric response is obtained for both analytes. The sensing platform is highly stable and it can be repeatedly used for 7 days.     

Nanomaterial-based electrochemical biosensors for medical applications

With recent advances in nanotechnology, great progress has been made in biosensors based on nanomaterials, but there are still numerous challenges to overcome. We describe nanomaterial-based biosensors for researchers new to the field, paying particular attention to metal nanoparticles and carbon nanotube (CNT)-based label-free approaches. Label-free monitoring of biorecognition events provides a promising platform, which is simple, cost-effective, and requires no external modification to biomolecules. Using examples from recent reports, we illustrate the diversity of biological recognition events and the range of experimental techniques employed for metal-nanoparticle-based and label-free characterization.     

Crystal violet as a G-quadruplex-selective probe for sensitive amperometric sensing of lead

A sensitive and selective amperometric sensing platform for lead (Pb(2+)) was developed based on a Pb(2+)-induced G-rich DNA conformational switch from a random-coil to G-quadruplex (G4) with crystal violet as the G4-binding indicator.     

Enzyme-free amperometric sensing of glucose by using gold nanoparticles

A nonenzymatic electrochemical method is described for the detection of glucose by using gold (Au) nanoparticles self-assembled on a three-dimensional (3D) silicate network obtained by using sol-gel processes. The nanosized Au particles have been self-assembled on the thiol tail groups of the silicate network and enlarged by hydroxylamine. The Au nanoparticles efficiently catalyze the oxidation of glucose at less-positive potential (0.16 V) in phosphate buffer solution (pH 9.2) in the absence of any enzymes or redox mediators. The Au nanoparticle-modified transducer (MPTS-nAuE) was successfully used for the amperometric sensing of glucose and it showed excellent sensitivity with a detection limit of 50 nM. The common interfering agent ascorbate (AA) does not interfere with the detection of glucose. The MPTS-nAuE transducer showed individual voltammetric responses for glucose and AA. This transducer responded linearly to glucose in the range of 0-8 mM and the sensitivity of the transducer was found to be 0.179 nA cm(-2) nM(-1). Excellent reproducibility, and long-term storage and operational stability was observed for this transducer.     

Electrospun rhodium nanoparticle-loaded carbon nanofibers for highly selective amperometric sensing of hydrazine

A novel one-step method has been carried out for synthesizing high-quality rhodium nanoparticle-loaded carbon nanofibers (nano-Rh/CNF) for the first time by using an electrospinning technology. The new hybrid material shows high electrocatalytic activity for hydrazine oxidation and can be potentially used for the amperometric sensing of hydrazine with high sensitivity and good selectivity.     

Nanomaterial-based biosensors for detection of prostate specific antigen

Screening serum for the presence of prostate specific antigen (PSA) belongs to the most common approach for the detection of prostate cancer. This review (with 156 refs.) addresses recent developments in PSA detection based on the use of various kinds of nanomaterials. It starts with an introduction into the field, the significance of testing for PSA, and on current limitations. A first main section treats electrochemical biosensors for PSA, with subsections on methods based on the use of gold electrodes, graphene or graphene-oxide, carbon nanotubes, hybrid nanoparticles, and other types of nanoparticles. It also covers electrochemical methods based on the enzyme-like activity of PSA, on DNA-, aptamer- and biofuel cell-based methods, and on the detection of PSA via its glycan part. The next main section covers optical biosensors, with subsections on methods making use of surface plasmon resonance (SPR), localized SPR and plasmonic ELISA-like schemes. This is followed by subsections on methods based on the use of fiber optics, fluorescence, chemiluminescence, Raman scattering and SERS, electrochemiluminescence and cantilever-based methods. The most sensitive biosensors are the electrochemical ones, with lowest limits of detection (down to attomolar concentrations), followed by mass cantilever sensing and electrochemilumenescent strategies. Optical biosensors show lower performance, but are still more sensitive compared to standard ELISA. The most commonly applied nanomaterials are metal and carbon-based ones and their hybrid composites used for different amplification strategies. The most attractive sensing schemes are summarized in a Table. The review ends with a section on conclusions and perspectives.

Open image in new window

Graphical abstract Schematic representation of nanostructure-based biosensors for detection of prostate specific antigen using various detection schemes and biorecognition elements such as antibodies (Abs), aptamers (APT), lectins (LEC), and molecularly imprinted polymers (MIP).

     

Porous cuprous oxide microcubes for non-enzymatic amperometric hydrogen peroxide and glucose sensing

Using porous cuprous oxide (Cu₂O) microcubes, a simple non-enzymatic amperometric sensor for the detection of H₂O₂ and glucose has been fabricated. Cyclic voltammetry (CV) revealed that porous Cu₂O microcubes exhibited a direct electrocatalytic activity for the reduction of H₂O₂ in phosphate buffer solution and the oxidation of glucose in an alkaline medium. The non-enzymatic amperometric sensor used in the detection of H₂O₂ with detection limit of 1.5 × 10^?6 M over wide linear detection ranges up to 1.5 mM and with a high sensitivity of 50.6 μA/mM. This non-enzymatic voltammetric sensor was further utilized in detection of glucose with a detection limit of 8.0 × 10^?7 M, a linear detection range up to 500 μM and with a sensitivity of ?70.8 μA/mM.     

Hydrothermal and plasma nitrided electrospun carbon nanofibers for amperometric sensing of hydrogen peroxide

Microchimica Acta - A fluorometric method is presented for sensitive deternination of microRNA. It is making use of carbon dots (C-dots) loaded with a DNA probe as fluorophore and MnO2 nanosheets...     

Carbohydrate recognition: a nascent technology for the detection of bioanalytes

Detection, identification and characterisation of biological material, for example micro-organisms, toxins and viruses, occupy an important position in industrial, medical and environmental analysis. Bioanalytes may be investigated by one of numerous analytical techniques available, however, the recognition principle often utilises either antibodies, an alternative protein recognition principle, or nucleic acid probes. Common techniques include ELISA, surface plasmon resonance and other evanescent wave detectors, flow cytometry, immunofluoresence microscopy, and PCR-based assays. Even though antibodies are the most successfully employed recognition component for identifying bioanalytes, they have a number of intrinsic negative aspects to their application. Up until now however, a suitable alternative has not been identified. Carbohydrate recognition is a mechanism by which a high proportion of biological molecules first come into contact with each other in the process of cellular adhesion. This article will discuss the possibility of using this principle as a biosensor recognition element, and will review the current situation.     

Nanomaterial-based electrochemical sensors for detection of glucose and insulin

Journal of Solid State Electrochemistry - Electrochemical sensors for the detection of specific biomolecules have attracted a lot of interest over the recent years due to their high sensitivity,...     

Functionalization of graphene with electrodeposited Prussian blue towards amperometric sensing application

Prussian blue (PB) was grown compactly on graphene matrix by electrochemical deposition. The as-prepared PB-graphene modified glassy carbon electrode (PB-graphene/GCE) showed excellent electrocatalytic activity towards both the reduction of hydrogen peroxide and the oxidation of hydrazine, which could be attributed to the remarkable synergistic effect of graphene and PB. The PB-graphene/GCE showed sensitive response to H₂O₂ with a wide linear range of 10-1440 μM at 0.0 V, and to hydrazine with a wide linear range of 10-3000 μM at 0.35 V. The detection limit was 3 μM and 7 μM, respectively, and both of them had rapid response within 5 s to reach 95% steady state response. The wide linear range, good selectivity and long-time stability of the PB-graphene/GCE make it possible for the practical amperometric detection of hydrogen peroxide and hydrazine.     

Functionalization of graphene with Prussian blue and its application for amperometric sensing of H2O2

As a two-dimensional carbon material with high surface area and conductivity, graphene shows great promise for designing composite nanomaterials to achieve high-performance electrochemical devices. In this work, we prepared graphene-based nanocomposite material by electrochemically depositing Prussian blue (PB) nanoparticles on the surface of graphene. Fourier transform infrared spectra, SEM, and cyclic voltammetry were used to characterize the successful immobilization of PB. Compared with PB films and graphene sheets, the PB–graphene composite films showed the largest current response to the reduction of H₂O₂, probably due to the synergistic effects between graphene sheets and PB nanoparticles. Therefore, a fast and highly sensitive amperometric sensor for H₂O₂ was obtained with a detection sensitivity of 1.6 μA μM^?1 H₂O₂ per cm² and a linear response range of 50～5,000 μM. The detection limit of H₂O₂ was 20 nM at a signal-to-noise ratio of 3. These obtained results are much better than those reported for carbon nanotubes-based amperometric sensors.