Paper-based solid-state electrochemiluminescence sensor using poly(sodium 4-styrenesulfonate) functionalized graphene/nafion composite film

Herein, highly efficient solid-state ECL sensor was introduced for the first time onto the screen printed electrodes of the paper-based chips (PCs) based on the composite film of poly(sodium 4-styrenesulfonate) functionalized graphene (PSSG) and Nafion. Attributed to the cooperative characteristics of both PSS and graphene, PSSG ensured both effective Ru(bpy)₃²⁺ immobilization and fast electron transfer of Ru(bpy)₃²⁺ in the composite film. The ECL behaviors at the developed sensor were investigated using tripropylamine as a representative analyte and low detection limit (S N⁻¹ = 3) of 5.0 nM was obtained. It also exhibited more excellent reproducibility (relative standard deviations of 0.63% for continuous 45 cycles) and long-term stability (∼80% of its initial ECL intensity could be retained over 3 months). More importantly, assisted by the developed ECL sensor, discrimination of 1.0 nM single-nucleotide mismatch in human urine matrix could be realized on the PCs for the first attempt. Thus, the developed sensor was confirmed with the advantages of highly sensitivity, long-term stability, simplicity, low cost, disposability, high efficiency and potential applicability.     

Multi-walled carbon nanotubes and Ru(bpy)3/nano-Au nano-sphere as efficient matrixes for a novel solid-state electrochemiluminescence sensor

An effective method for immobilization of Ru(bpy)₃²⁺ on glassy carbon electrode surface (GCE) is developed for the preparation of a novel electrochemiluminescence sensor. First of all, the positively charged Ru(bpy)₃²⁺ is modified on the surface of negatively charged gold nanoparticles (nano-Au) via the electrostatic interactions to obtain the Ru(bpy)₃²⁺/nano-Au nano-sphere (abbreviate as Ru-AuNPs). Subsequently, the large amount of Ru-AuNPs are immobilized on the multi-wall carbon nanotubes (MWCNTs)-Nafion homogeneous composite coated GCE by dual interaction: firstly, the Nafion, a kind of typical cation-exchange membrane, can absorb the Ru-AuNPs as the enrichment of cation Ru(bpy)₃²⁺ on the Ru-AuNPs surface; secondly, the employment of carboxylic MWCNTs in the Nafion film can also chemosorb the Ru(bpy)₃²⁺ cation on the Ru-AuNPs surface to increase the carrier content. At the same time, the experiment confirms that the enhancement of the ECL intensity on the sensor is attributed to following reasons. One hand, the employment of MWCNTs in the Nafion film enlarged the electro-active surface areas to benefit the contact between the signal probe on the composite film and coreactant used as reinforcing agent. On the other hand, the nano-materials of MWCNTs and nano-Au also improve the conductivity of the assembled film to increase the quantity of excited state of Ru(bpy)₃²⁺ in the unit time under the electrochemical condition and finally cause better properties in luminescence. In the experiment, the influence of the coreactant tripropylamine (TPA) on proposed ECL sensor is investigated. The logarithm of ECL intensity is proportional to the logarithm of TPA concentration on the range of 4 × 10⁻¹⁰ M to 2.8 × 10⁻⁶ M and 2.8 × 10⁻⁶ M to 0.71 × 10⁻³ M. After optimizing these conditions, the ECL sensor with TPA as coreactant is employed to detect a kind of alkaloid medicine, Matrine, for evaluating the practical application in the medicine analysis. The present sensor with TPA as coreactant shows the good response to the medicine concentration of the Matrine from 2.0 × 10⁻⁶ M to 6.0 × 10⁻³ M, which is used to detect the Matrine concentration in the Matrine injection.     

Highly sensitive luminol electrochemiluminescence immunosensor based on ZnO nanoparticles and glucose oxidase decorated graphene for cancer biomarker detection

In this work, we reported a sandwiched luminol electrochemiluminescence (ECL) immunosensor using ZnO nanoparticles (ZnONPs) and glucose oxidase (GOD) decorated graphene as labels and in situ generated hydrogen peroxide as coreactant. In order to construct the base of the immunosensor, a hybrid architecture of Au nanoparticles and graphene by reduction of HAuCl₄ and graphene oxide (GO) with ascorbic acid was prepared. The resulted hybrid architecture modified electrode provided an excellent platform for immobilization of antibody with good bioactivity and stability. Then, ZnONPs and GOD functionalized graphene labeled secondary antibody was designed for fabricating a novel sandwiched ECL immunosensor. Enhanced sensitivity was obtained by in situ generating hydrogen peroxide with glucose oxidase and the catalysis of ZnONPs to the ECL reaction of luminol–H₂O₂ system. The as-prepared ECL immunosensor exhibited excellent analytical property for the detection of carcinoembryonic antigen (CEA) in the range from 10 pg mL⁻¹ to 80 ng mL⁻¹ and with a detection limit of 3.3 pg mL⁻¹ (S N⁻¹ = 3). The amplification strategy performed good promise for clinical application of screening of cancer biomarkers.     

Preparation of chitosan/N-doped graphene natively grown on hierarchical porous carbon nanocomposite as a sensor platform for determination of tartrazine

In this work,the chitosan and N-doped graphene natively grown on hierarchical porous carbon(N-PC-G/CS) nanocomposite was obtained by ultrasonic method,as a novel sensor platform for determination of tartrazine(TT).The nanocomposite as prepared had well dispersivity in water and excellent conductivity.The N-PC-G/CS nanocomposite was characterized by scanning electron microscopy(SEM),transmission electron microscopy(TEM),nitrogen adsorption-desorption,fourier transform infrared(FTIR) and electrochemical impedance spectroscopy(EIS).The application of N-PC-G/CS for determination of tartrazine(TT) was investigated by chronocoulometry(CC),cyclic voltammetry(CV) and differential pulse voltammetry(DPV).Under optimized conditions,the sensor displayed a sensitive response to TT within a wide concentration range of 0.05-15.0 μmol/L,the detection limits is 0.036 μmol/L(S/N = 3).Furthermore,this nanocomposite could be efficiently applied for determination of TT in soft drink samples.     

Synthesis of palladium nanoparticles on organically modified silica: Application to design of a solid-state electrochemiluminescence sensor for highly sensitive determination of imipramine

Organically modified silica substrate containing amine and vinyl functional groups were used for reduction and stabilization of palladium nanoparticles. Uniform spherical nanoparticles of palladium with average diameter of 10 nm were formed on silica substrate by direct contact of the substrate with an aqueous solution of palladium precursor, without the addition of any chemical reducer. Moreover, a sensitive and selective solid state electrochemiluminescence sensor was fabricated for the determination of imipramine, based on Ru(bpy)₃²⁺-palladium nanoparticles doped carbon ionic liquid electrode. In this process, imipramine acts as a co-reactant for Ru(bpy)₃²⁺. It is believed that the enhancement of the electrochemiluminescence signal in the presence of palladium nanoparticles in the composite is due to palladium catalytic effect on electrochemical and also chemical process involved in formation of Ru(byp)₃²⁺*. In addition, the results confirmed that, the rigid composite electrode shows the characteristic of microelectrode arrays. The proposed method was applied to the determination of imipramine in tablets and urine samples. The electrochemiluminescence intensity showed good linearity with the imipramine concentration from 1–100 pM, with a detection limit of 0.1 pM.     

Synthesis of PtNPs/AQ/Ru(bpy)3(2+) colloid and its application as a sensitive solid-state electrochemiluminescence sensor material

The facile synthesis of the novel platinum nanoparticles/Eastman AQ55D/ruthenium(II) tris(bipyridine) (PtNPs/AQ/Ru(bpy)3(2+)) colloidal material for ultrasensitive ECL solid-state sensors was reported for the first time. The cation ion-exchanger AQ was used not only to immobilize ECL active species Ru(bpy)3(2+) but also as the dispersant of PtNPs. Colloidal characterization was accomplished by transmission electron microscopy (TEM), X-ray photoelectron spectrum (XPS), and UV-vis spectroscopy. Directly coating the as-prepared colloid on the surface of a glassy carbon electrode produces an electrochemiluminescence (ECL) sensor. The electronic conductivity and electroactivity of PtNPs in composite film made the sensor exhibit faster electron transfer, higher ECL intensity of Ru(bpy)3(2+), and a shorter equilibration time than Ru(bpy)3(2+) immobilized in pure AQ film. Furthermore, it was demonstrated that the combination of PtNPs and permselective cation exchanger made the sensor exhibite excellent ECL behavior and stability and a very low limit of detection (1 x 10(-15) M) of tripropylamine with application prospects in bioanalysis. This method was very simple, effective, and low cost.     

Highly dispersive Ag nanoparticles on functionalized graphene for an excellent electrochemical sensor of nitroaromatic compounds

A facile carbon radical reaction procedure and a chemical reduction method were proposed to synthesize Ag nanoparticles on functionalized graphene with uniform, high dispersion and excellent stability. The resultant material showed excellent electrocatalytic activity to nitroaromatic compounds and high sensitivity to the detection of nitroaromatic compounds.     

Methane sensor based on palladium/MWNT nanocomposites

Methane gas sensor was fabricated based on electrocatalytic properties of the Pd/MWNT nanocomposites on indium tin oxide (ITO)glass substrates.A linear response for methane was obtained in the range of 0-16%(v/v)with a detection limit of 0.167%(v/ v)and R.S.D.of 4.1%.After 100 times sensing or stable stored more than 12 months in atmosphere,unconspicuous measurable decrease was observed.The response time was less than 60s at room temperature and ambient pressure.Some common potential interferents in samp...     

Multifunctional nanocomposites based on tetraethylenepentamine-modified graphene oxide/epoxy

Composites based on epoxy/graphene were investigated for thermal-mechanical performance. Initially, few-layer graphene oxide (GO) was modified with tetraethylenepentamine (GO-TEPA) in a reaction assisted by microwave radiation. GO and GO-TEPA samples were characterized for their structure and morphology. Composites containing 0.1, 0.3 and 0.5 wt.% of GO and GO-TEPA were prepared, and the effect of fillers on the morphology of cryofractured regions of epoxy matrix was observed through electron microscopy images. Dynamic mechanical thermal analysis (DMA) tests revealed increases of approximately 20 °C in glass transition. Moreover, when compared to neat polymer, composites containing 0.5 wt.% of GO-TEPA gained up to 103% in thermal conductivity (obtained by flash laser). Finally, nanoindentation analyses showed increases of 72% in Young's modulus and 143% in hardness for the same sample. The system is characterized as multifunctional nanocomposites because of the simultaneous gains in thermal and mechanical properties. The best results of the multifunctional composites were strongly associated with the chemical modification of the GO by TEPA.     

Highly porous, water-soluble, superparamagnetic, and biocompatible magnetite nanocrystal clusters for targeted drug delivery

Magnetic particles have become very promising materials for drug delivery. However, preparation of magnetite particles with high surface area, biocompatibility, strong magnetic response, and suitable particle size still remains a major challenge. In this report, magnetite nanocrystal clusters with high surface areas were fabricated through a solvothermal process by introducing ammonium acetate as a porogen and trisodium citrate as a surface modification agent. The porosity, which was controlled by the reactant concentration, has been investigated in detail. The surface area of the nanocrystal clusters was as high as 141 m(2) g(-1). Ibuprofen, as a model drug, was entrapped into the magnetite carriers. The interfacial interaction between the carboxylic groups on the drug molecules and the carboxylate groups on the carriers enhanced the loading efficiency. Low cytotoxicity in MCF-7 cell and in vitro constant drug release behavior combined with the high drug loading efficiency and high saturation magnetization values demonstrated the potential of the as-synthesized magnetite materials in targeted drug release systems.     

[Ru(bpy)3] nanocomposites containing heteropolyacids: Simple preparation and stable solid-state electrochemiluminescence detection application

In order to solidify the electrochemiluminescence (ECL) luminophor tris(2,2′-bipyridyl) ruthenium(II) ([Ru(bpy)₃]²⁺) onto the electrode surfaces robustly, the negative charged heteropolyacids (HPAs) moieties were utilized to attract and bond cations [Ru(bpy)₃]²⁺ via an adsorption method. The compositions and microstructures of the hybrid complexes were characterized by elemental analysis (EDS), spectroscopic techniques (UV-vis, FTIR) and field-emission scanning electron microscopy (FE-SEM). The electrochemical and ECL behaviors of the [Ru(bpy)₃]²⁺/[PW₁₂O₄₀]³⁻ hybrid complex contained in the solid film of the nanocomposites formed on the electrode surfaces were also studied. It was found that the corresponding solid membranes exhibited a diffusion-controlled voltammetric feature and excellent electrochemiluminescence behaviors. Hence potential prospects as new electrochemiluminescent materials for application in electroanalytical detection are envisioned.     

高选择性H2O2电化学发光传感器的研制及分析特性研究

提出了基于鲁米诺和醋酸纤维素修饰碳糊电极构建H2O2电化学发光传感器的新方法。在最佳实验条件下,该传感器具有重现性好,抗干扰能力强和选择性好等优点,H2O2浓度在4.0×10-6～4.0×10-5mol L范围内与相对电化学发光强度呈线性关系。该方法测定H2O2的检出限为1.6×10-6mol L,相对标准偏差为1.4%,相关系数为0.9978。     

Manufacturing homogenous PVC/graphene nanocomposites using a novel dispersion agent

The goal of the study was to prepare a graphene (GN) dispersion in a poly (vinyl chloride) (PVC) solution with enhanced stability of the nanofiller thanks to the application of curcuma extract (CE). The stable dispersion was used to obtain PVC/GN nanocomposites with more homogeneous graphene by the solvent evaporation method. The CE effectiveness was compared with two commercially available dispersants in the form of oleic acid (OA) and polysorbate 80 (P80).The chemical composition of the CE was examined by Fourier-transform infrared spectroscopy. The dispersion stability was tested by the multiple light scattering method (Turbiscan Lab) and evaluated visually over a period of 40 days. The homogeneity of the filler's dispersion in the PVC matrix was evaluated by scanning electron microscopy and Raman spectroscopy.The application of the dispersing agents led to improved stability of the graphene dispersion in PVC solution. CE was the agent that most effectively improved the homogeneity of graphene dispersion, both in dispersions in a PVC solution and in PVC/GN nanocomposite films.     

A highly efficient chemical sensor material for ethanol: Al2O3/Graphene nanocomposites fabricated from graphene oxide

Al(2)O(3)/Graphene nanocomposites are firstly produced from GO solution by a one-step, green, facile, low-cost SC CO(2) method. The as-prepared nanocomposite papers display high CL sensitivity and high selectivity to the ethanol gas, which provides a facile, green and low-cost route for the preparation of ethanol nanoscopic sensing devices with wide applications.     

A flexible solid-state supercapacitor based on graphene/polyaniline paper electrodes

The direct coating of graphene sheets obtained by electrochemical exfoliation on commercial paper renders the preparation of highly conductive flexible paper substrate for subsequent deposition of polyaniline(PANi) nanorods via electrochemical polymerization. The deposition of PANi can be well-controlled by adjusting the electrochemical polymerization time, leading to the formation of PANi coated graphene paper(PANi-GP). The as-prepared electrode exhibited high areal capacitance of 176 mF cm~(-2) in threeelectrode system at a current density of 0.2 mA cm~(-2), which is around 10 times larger than that of pristine graphene paper due to the pseudocapacitive behavior of PANi. In-situ Raman test was used to determine the molecular changes during redox process of PANi. More importantly, all-solid-state symmetric capacitor assembled with two PANi-GP electrodes in a polymer electrolyte delivered an areal capacitance of 123 mF cm~(-2), corresponding to an areal energy density of 17.1 μWh cm~(-2) and an areal power density of 0.25 m W cm~(-2). The symmetric capacitor held a capacitive retention of 74.8% after 500 bending tests from 0 to 120°, suggesting the good flexibility and mechanical stability. These results showed the great promising application in flexible energy-storage devices.     

Preparation of fluoroalkyl end-capped oligomers/magnetite nanocomposites possessing a good dispersibility and stability

Fluoroalkyl end-capped vinylphosphonic acid cooligomers-encapsulated magnetite nanocomposites were prepared by the magnetization of aqueous ferric and ferrous ions in the presence of the corresponding fluorinated cooligomers and magnetic nanoparticles under alkaline conditions. These fluorinated cooligomers magnetic composites are nanometer size-controlled very fine particles and have a good dispersibility and stability in water and traditional organic solvents. These fluorinated nanocomposites were also applied to the surface modification of poly(methyl methacrylate) to exhibit a good oleophobicity imparted by fluorine on their surface. Fluoroalkyl end-capped 2-methacryloyloxyethanesulfonic acid oligomer-encapsulated magnetite nanocomposites and fluoroalkyl end-capped 2-acrylamide-2-methylpropanesulfonic acid oligomer-encapsulated magnetite nanocomposites were prepared in good isolated yields by the magnetization of iron chlorides in the presence of the corresponding oligomers and magnetic nanoparticles under similar conditions. Colloidal stability of these fluorinated nanocomposites thus obtained in water was demonstrated to become extremely higher than that of fluorinated vinylphosphonic acid cooligomers/magnetic nanocomposites.     

Highly selective and sensitive paper-based colorimetric sensor using thiosulfate catalytic etching of silver nanoplates for trace determination of copper ions

A novel, highly selective and sensitive paper-based colorimetric sensor for trace determination of copper (Cu²⁺) ions was developed. The measurement is based on the catalytic etching of silver nanoplates (AgNPls) by thiosulfate (S₂O₃²⁻). Upon the addition of Cu²⁺ to the ammonium buffer at pH 11, the absorption peak intensity of AuNPls/S₂O₃²⁻ at 522 nm decreased and the pinkish violet AuNPls became clear in color as visible to the naked eye. This assay provides highly sensitive and selective detection of Cu²⁺ over other metal ions (K⁺, Cr³⁺, Cd²⁺, Zn²⁺, As³⁺, Mn²⁺, Co²⁺, Pb²⁺, Al³⁺, Ni²⁺, Fe³⁺, Mg²⁺, Hg²⁺ and Bi³⁺). A paper-based colorimetric sensor was then developed for the simple and rapid determination of Cu²⁺ using the catalytic etching of AgNPls. Under optimized conditions, the modified AgNPls coated at the test zone of the devices immediately changes in color in the presence of Cu²⁺. The limit of detection (LOD) was found to be 1.0 ng mL⁻¹ by visual detection. For semi-quantitative measurement with image processing, the method detected Cu²⁺ in the range of 0.5–200 ng mL⁻¹(R² = 0.9974) with an LOD of 0.3 ng mL⁻¹. The proposed method was successfully applied to detect Cu²⁺ in the wide range of real samples including water, food, and blood. The results were in good agreement according to a paired t-test with results from inductively coupled plasma-optical emission spectrometry (ICP-OES).     

Mixed colloidal suspensions of reduced graphene oxide and layered metal oxide nanosheets: useful precursors for the porous nanocomposites and hybrid films of graphene/metal oxide

Homogeneously mixed colloidal suspensions of reduced graphene oxide, or RGO, and layered manganate nanosheets have been synthesized by a simple addition of the exfoliated colloid of RGO into that of layered MnO(2). The obtained mixed colloidal suspensions with the RGO/MnO(2) ratio of ≤0.3 show good colloidal stability without any phase separation and a negatively charged state with a zeta (ζ) potential of -30 to -40?mV. The flocculation of these mixed colloidal suspensions with lithium cations yields porous nanocomposites of Li/RGO-layered MnO(2) with high electrochemical activity and a markedly expanded surface area of around 70-100?m(2) g(-1). Relative to the Li/RGO and Li/layered MnO(2) nanocomposites (≈116 and ≈167?F?g(-1)), the obtained Li/RGO-layered MnO(2) nanocomposites deliver a larger capacitance of approximately 210?F?g(-1) with good cyclability of around 95-97?% up to the 1000th cycle, thus indicating the positive effect of hybridization on the electrode performances of RGO and lithium manganate. Also, an electrophoretic deposition of the mixed colloidal suspensions makes it possible to easily fabricate uniform hybrid films composed of graphene and manganese oxide. The obtained films show a distinct electrochemical activity and a homogeneous distribution of RGO and MnO(2). The present experimental findings clearly demonstrate that the utilization of the mixed colloidal suspensions as precursors provides a facile and universal methodology to synthesize various types of graphene/metal oxide hybrid materials.