Fe3O4@[Cu3(btc)2]磁性分散微固相萃取-液相色谱串联质谱法测定水样中四环素类抗生素残留

本文合成了磁性金属有机骨架材料Fe₃O₄@[Cu₃(btc)₂],并作为分散微固相萃取的吸附剂用于四环素类抗生素的富集. 对萃取的条件,包括萃取时间、溶液pH和洗脱溶剂对四环素类抗生素萃取效率的影响进行了研究. 结果显示Fe₃O₄@[Cu₃(btc)₂]可以有效富集四环素类抗生素,而四环素类抗生素与Fe₃O₄@[Cu₃(btc)₂]之间的静电相互作用主导了这一过程. 利用分散微固相萃取结合液相色谱-串联质谱法对天然水中的四种四环素类抗生素(土霉素,四环素,金霉素和多西环素)残留进行了测定. 四种抗生素的检出限(S/N=3)为0.01∽0.02 μg/L,定量限(S/N=10)为0.04∽0.07 μg/L. 河水和养殖水中四环素三个水平的加标回收率为70.3%∽96.5%,相对标准偏差为3.8%∽12.8%. 结果表明,基于磁性金属有机骨架材料的分散微固相萃取可以从水中简单、快速、高效地富集四环素类抗生素.     

利用氧化辅助气固法生长高磁性的α-Fe2O3和Fe3O4纳米线

探讨生长α-Fe₂O₃和Fe₃O₄纳米线的一个可控制的合成过程. 在研究中发现,高磁性的α-Fe₂O₃纳米线已经成功地利用氧化辅助气固法结晶生成于Fe_0.5Ni_0.5合金基板上;若基板事先浸泡于草酸溶液中,随草酸浓度的增加,所生长的纳米线晶相会逐转变为Fe₃O₄,当草酸浓度达到0.75 mol/L时,所生长的纳米线几乎全部转变成Fe₃O₄晶相. 此外,实验结果也显示所生长的纳米线长度及直径会随着气固过程中的温度上升而增加,生长密度则会随着气固过程中的流量加大而上升. 此过程所提出的合成程序可在2 h內完成.     

具有介孔结构的MnSiO3@Fe3O4@C纳米粒子的制备以及作为pH响应的T1-T2*双模MRI造影剂的研究应用

本文通过一个简单的、温和的方案制备了平均尺寸为120 nm,介孔结构的纳米粒子MnSiO₃@Fe₃O₄@C. 粒子的细胞毒性微小,可以用作T₁-T₂^*双模MRI造影剂. 酸性条件下MnSiO₃@Fe₃O₄@C释放出大量的Mn²⁺缩短T₁弛豫时间,提高成像分辨率. 超顺磁性的Fe₃O₄可以增强T₂对比成像,检测病变组织. 类似于肿瘤微环境/细胞器的酸性PBS(pH=5.0)中Mn²⁺的释放率达到31.66%,约为中性条件(pH=7.4)下的7倍. 释放的Mn²⁺通过内吞作用被细胞摄取,经肾脏排出,细胞毒性实验表明,MnSiO₃@Fe₃O₄@C具有低的细胞毒性,即使高浓度的200 ppm MnSiO₃@Fe₃O₄@C对HeLa细胞的毒性也相对较小. 对荷瘤小鼠静脉注射定量MnSiO₃@Fe₃O₄@C后,可以观察到一个快速增强的对比成像,给药24 h后,T₁MRI信号显著增强,达到132%,而T₂信号则明显降低至53.8%,活体MR成像证明了MnSiO₃@Fe₃O₄@C可以同时作为阳性和阴性造影剂. 此外,得益于介孔MnSiO₃优秀的酸敏感性,MnSiO₃@Fe₃O₄@C可以作为一种潜在的药物载体,实现肿瘤的诊疗一体化.     

超细Fe3O4的氧化过程

根据穆斯堡尔谱分析,Fe₃O₄转变为γ-Fe₂O₃是γ-Fe₂O₃成核生长过程。根据氧化过程磁矩的变化确定Fe₃O₄浓度随时间的变化,-(dc)/(dt)=mc³仅在氧化初始阶段适合。     

HC2nO+ (n=3-6) 正离子的红外光解离光谱以及理论计算研究

本文利用脉冲激光溅射-超声分子束载带离子源在气相中产生了HC_2nO⁺ (n=3-6)正离子. 通过对贴附CO的络合物离子的红外光解离光谱实验获得了HC_2nO⁺正离子在1600∽3500 cm^-1范围内的红外光谱. 通过比较实验光谱和理论模拟光谱确定了HC_2nO⁺正离子具有端接氢和氧的直线型碳链衍生物结构,基态为三重态,单重态比三重基态能量高10∽15 kcal/mol. 成键分析表明HC_2nO⁺中的碳链具有连烯的结构特征.     

海藻酸改性的空心Fe3O4纳米颗粒的制备与应用

不使用任何模板一步制得空心Fe₃O₄纳米颗粒,然后将海藻酸钠嫁接在氨基化的空心Fe₃O₄表面,再利用海藻酸盐与钙离子的作用,在空心Fe₃O₄表面形成一个凝胶化层,制得海藻酸盐凝胶化的空心Fe₃O₄纳米颗粒,粒径约为400～500 nm．采用TEM、XRD、XPS、VSM等手段对纳米微球进行表征．VSM表征结果表明在室温下样品磁性材料为超顺磁性．改性Fe₃O₄纳米颗粒成功地用于柔红霉素的载负和缓释,最大载负率和载药量分别为28.4%和14.2%．缓释结果表明,海藻酸盐凝胶化层的存在,能更有效控制柔红霉素缓慢地释放．     

小尺寸VmOn+团簇的激光光解和密度泛函计算

通过激光溅射法产生了V₂O_n⁺ (n=1, 2), V₃O_n⁺ (n=1, 2, 3)和V₄O₃⁺等缺氧的钒氧团簇,并采用532和266 nm波长的激光对它们进行了光解研究. 利用密度泛函理论计算与激光光解实验相结合确定了这些团簇的几何结构和可能的光解通道. 激光光解实验表明V相似文献   

OCS经由F 31Π里德堡态生成CO(X1Σ+)+S(1D2)产物的波长相关性光解离

本文利用时间切片离子速度成像技术在134∽140 nm波段研究了OCS分子经由F 3¹Π里德堡态的真空紫外光解离动力学. 在选取的5个分别对应OCS(F 3¹Π, v₁=0∽4)的伸缩振动激发的光解波长,实验测得了来自CO(X¹Σ⁺)+S(¹D₂)产物通道的SS(¹D₂))实验影像,并获得了总平动能谱和CO(X¹Σ⁺, v)共生产物的振动布居及角分布. 结果分析表明OCS分子解离生成CO(X¹Σ⁺)+S(¹D₂)产物的过程经历了上态F 3¹Π 与C_?v和C_s构型的下电子态间非绝热耦合过程. 实验结果显示了很强的波长相关性：OCS (F 3¹Π, v₁)的较低转动激发态(v₁=0∽2)和较高转动激发态(v₁=3, 4)的CO(X¹Σ⁺)产物的振动布居和角分布具有显著差异,表明该解离过程中具有不同的解离机理. 本结果提供了振动耦合可能对真空紫外光解离动力学产生关键作用的相关证据.     

钴改性Fe3O4-MnO2催化转化生物质合成气制备液体燃料

本文制备了用于费托合成反应的钴改性Fe₃O₄-MnO₂双功能催化剂,并探究了钴负载量对Fe-Co协同效应的影响以及Fe₁Co_xMn₁催化剂的费托合成反应性能. 实验发现,在Fe₃O₄-Mn催化剂中加入Co可促进铁氧化物的还原、增加反应过程中铁位点的活性. 此外,Co的加入可增强Fe-Co金属间的电子转移,加强两者的协同作用,提高催化性能. Co负载较高的Fe₁Co_xMn₁催化剂可进一步促进加氢反应能力,使产品分布向短链烃方向转移. 在280 ^°C、2.0 MPa和3000 h^-1的最佳工况条件下,Fe₁Co₁Mn₁催化剂的液体燃料收率最高.     

磁场下合成Fe3O4粉体的隧道磁阻

通过在半金属Fe₃O₄合成过程中外加磁场的方法，改变样品粒子的表面结晶状态和晶格缺陷，研究了由此引起的Fe₃O₄输运性质的变化.合成的Fe₃O₄粉体的主要导电机理均为自旋极化隧穿和高阶跃迁电导，电阻随温度升高成指数降低，电阻与电压显示了非线形相关性，磁阻与磁场的关系为蝴蝶形，是典型的隧道磁阻特征.与没有外加磁场时合成的样品比较，外加磁场合成的样品显示了更低的电阻和更高的磁阻.     

Optical spectroscopy of Ca3Sc2Si3O12, Ca3Y2Si3O12 and Ca3Lu2Si3O12 doped with Pr

The silicates Ca₃Sc₂Si₃O₁₂, Ca₃Y₂Si₃O₁₂ and Ca₃Lu₂Si₃O₁₂, both undoped and doped with Pr³⁺ ions, have been synthesized by solid-state reaction at high temperature. The luminescence spectroscopy and the excited state dynamics of the materials have been studied upon VUV and X-ray excitation using synchrotron radiation. All doped samples have shown efficient 5d-4f emission upon direct VUV excitation of 5d levels, but only Ca₃Sc₂Si₃O₁₂:Pr³⁺ shows luminescence upon interband VUV or X-ray excitation. The VUV excited emission spectra of Ca₃Y₂Si₃O₁₂:Pr³⁺ and Ca₃Lu₂Si₃O₁₂:Pr³⁺ show features attributed to emission from two distinct sites accommodating the Pr³⁺ dopant. The decay kinetics of the Pr³⁺ 5d-4f emission in Ca₃Sc₂Si₃O₁₂:Pr³⁺ upon VUV excitation across the band gap are characterized by decay times in the range 25-28 ns with no significant rise after the excitation pulse. They appear to be faster upon X-ray irradiation than for VUV excitation. Weak afterglow components are attributed to defect luminescence.     

Multilayer Bi1.5Zn1.0Nb1.5O7/Ba0.6Sr0.4TiO3/Bi1.5Zn1.0Nb1.5O7 thin films for tunable microwave applications

Bi_1.5Zn_1.0Nb_1.5O₇/Ba_0.6Sr_0.4TiO₃/Bi_1.5Zn_1.0Nb_1.5O₇ tunable multilayer thin film has been fabricated by pulsed laser ablation and characterized. Phase composition and microstructure of multilayer films were characterized by X-ray diffraction, scanning electron microscopy (SEM) and atomic force microscopy (AFM). The film has very smooth surface with RMS roughness of 1.5-2 nm and grain size of 100-150 nm. Total film thickness has been measure to be 375 nm. The BZN thin films at 300 K, on Pt(1 1 1)/SiO₂/Si substrate showed zero-field dielectric constant of 105 and dielectric loss tangent of 0.002 at frequency of 0.1 MHz. Thin films annealed at 700 °C shows the dielectric tunability of 18% with biasing field 500 kV/cm at 0.1 MHz. The multilayer thin film shows nonferroelectric behavior at room temperature. The good physical and electrical properties of multilayer thin films make them promising candidate for tunable microwave device applications.     

合成反铁磁Ni81Fe19/Co90Fe10/Ru/Co90Fe10/Ni81Fe19的研究

采用直流磁控溅射方法制备了一系列的合成反铁磁及以其为自由层的自旋阀.研究发现,在Ni₈₁Fe₁₉与Ru层之间插入适当厚度的Co₉₀Fe₁₀层后,可有效地提高合成反铁磁两磁性层间的反铁磁耦合强度,得到具有饱和场H_s更高、饱和磁化强度M_s更低、热稳定性更好的合成反铁磁.另外,以这种合成反铁磁作自旋阀的自由层时,可有效提高自旋阀的稳定性. 关键词： 合成反铁磁 退火 自旋阀     

La0.67Ca0.33MnO3薄膜皮秒光电效应

在1064 nm波长脉冲激光（脉宽25 ps）的照射下，钙钛矿氧化物薄膜La0.67Ca0.33MnO3/SrTiO3具有超快光电效应，对激光脉冲显示ps量级的响应时间，上升沿响应时间300 ps，半高宽700 ps，同时，对激光能量的响应灵敏度为500 mV/mJ。     

Structure and magnetic order in La0.7Ca0.3Mn0.5Co0.5O3 and La0.8Sr0.2Mn0.5Co0.5O3 perovskites

In this paper we report the study of the perovskites La_0.7Ca_0.3Mn_0.5Co_0.5O₃ and La_0.8Sr_0.2Mn_0.5Co_0.5O₃ by neutron powder diffraction at various temperatures and magnetization measurements in zero applied field and at low cooling regimes. The replacement of half Mn by Co in La_0.7Ca_0.3MnO₃ and La_0.8Sr_0.2MnO₃ destroys their long-range ferromagnetism exhibiting a cluster glass ferromagnetic order similar to the one observed in many cobaltites.     

Depolarization currents in the Na0.5Bi8.5Ti2Nb4O27 and Na0.5Bi8.5Ti2Ta4O27 layered ferroelectrics

The influence of the prehistory on the electrical properties of layered ferroelectrics is investigated. It is established that the heating of short-circuited samples of the nonpolarized ceramic material Na_0.5Bi_8.5Ti₂Nb₄O₂₇ leads to the appearance of maxima of the current at temperatures below the Curie point only in the case of preliminary ageing of the samples. Original Russian Text ? A.I. Burkhanov, Yu.V. Kochergin, K. Bormanis, A. Kalvane, M. Dambekalne, 2009, published in Fizika Tverdogo Tela, 2009, Vol. 51, No. 7, pp. 1393–1394.     

Phase formation and characterization of Sr3Y2Ge3O12, Sr3In2Ge3O12, and Ca3Ga2Ge3O12 doped by trivalent europium

This work reports on the phase formation during a solid-state reaction of Eu³⁺-doped garnets with the general formula A₃B₂Ge₃O₁₂ (A=Ca, Sr and B=Ga, In, Y) and their luminescent properties. It is shown by XRD and DTA/TG experiments that the garnet-phase formation is completed at 1100-1200 °C. Moreover, it turned out that the position of the oxygen to europium charge-transfer band and the intensity of the forbidden 4f-4f transitions of Eu³⁺ is dependent on the covalent interaction between the Eu³⁺ activator and the surrounding oxygen anions. The investigated red-emitting luminescent materials show high lumen equivalents and deep red emission at the same time, which makes them attractive for the application in LEDs (light emitting diodes), in particular for near UV-emitting LEDs.     

Appearance of an inhomogeneous superconducting state in La0.67Sr0.33MnO3-YBa2Cu3O7-La0.67Sr0.33MnO3 trilayers

An experimental study of proximity effect in La_0.67Sr_0.33MnO₃-YBa₂CU₃O₇-La_0.67Sr_0.33MnO₃ trilayers is reported. Transport measurements on these samples show clear oscillations in critical current (I _c) as the thickness of La_0.67Sr_0.33MnO₃ layers (d _F) is scanned from ∼50 ? to ∼ 1100 ?. In the light of existing theories of ferromagnet-superconductor (FM-SC) heterostructures, this observation suggests a long range proximity effect in the manganite, modulated by its weak exchange energy (∼2 meV). The observed modulation of the magnetic coupling between the ferromagnetic LSMO layers as a function of d _F, also suggests an oscillatory behavior of the SC order parameter near the FM-SC interface.      

X-ray study of phase transitions in the system of solid solutions K2Pb4Nb10O30-Na2Pb4Nb10O30-K6W4Nb6O30

Boundaries of morphotropic phase transitions region in the system of solid solutions K₂Pb₄Nb₁₀O₃₀-Na₂Pb₄Nb₁₀O₃₀-K₆W₄Nb₆O₃₀ with the structure of the tetragonal tungsten bronze have been specified. Presence of the second morphotropic phase transition, perpendicular to the first one has been revealed. The temperature dependences of the structural parameters of some compounds have been investigated. The compounds with high values of Curie temperatures and working temperatures have been obtained.     

Incommensurate modulations in Ba2TiSi2O8, Sr2TiSi2O8, and Ba2TiGe2O8

Incommensurate modulations in Ba₂TiSi₂O₈, Sr₂TiSi₂O₈, and Ba₂TiGe₂O₈ are compared based on their corresponding electron diffraction patterns. The dependence of the modulations on chemical composition provides a suitable model system for the investigation of incommensurations in framework structures using high-resolution transmission electron microscopy (HRTEM). A widening of quantitative HRTEM utilising the concept of rigid units is proposed allowing for a determination of atomistic displacements responsible for the formation of incommensurately modulated structures.