Structure of a di-zinc complex of a bis-calix[4]arene conjugate and its sensing of cysteine among the amino acids

Abstract

A triethylene glycol di-imine locked triazole linked bis-calix[4]arene conjugate (L) and its Zn²⁺ complex [Zn₂L], were synthesised, characterised and the three-dimentional (3-D) structure of the complex was established by single crystal XRD. In this complex, the Zn²⁺ centre exhibits distorted tetrahedral geometry with N₂O₂ binding core. The complex showed selectivity towards cysteine (Cys) with greater sensitivity followed by histidine (His) among the naturally occurring amino acids studied based on fluorescence and absorption spectroscopy. The fluorescence quenching of the complex is much greater with Cys as compared to that of His. The detection limit of Cys is 650 ppb. Release of Zn²⁺ from its complex [Zn₂L] followed by its capture by –SH containing molecules was shown based on absorption and emission spectroscopy. This was also shown in one case by ¹H NMR spectroscopy.     

Bifunctional fluorescent thiacalix[4]arene based chemosensor for Cu and F ions

A new thiacalix[4]arene based fluorescent sensor bearing two dansyl groups has been synthesized in cone conformation. In CH₃CN:CH₂Cl₂ (1:1), the presence of Cu (II) induces the formation of a 1:1 metal:ligand complex, which exhibits increasing emission at 433 nm at the expense of the fluorescent emission of 1 centered at 504 nm. The detection limit of the sensor for Cu²⁺ is 2×10⁻⁷ mol L⁻¹. For anion sensing, 1 shows a high selectivity for fluoride ions over other anions tested.     

Novel calix[4]arene based metallo-supramolecular complex for recognition of cyanide ions in aqueous medium

A novel bis-naphthalimidocalix[4]arene-Cu(II) supramolecular complex has been observed to provide an efficient recognition system for CN^? ions in aqueous medium. The binding stoichiometry of bis-naphthalimidocalix[4]arene and copper ion has been found to be 1:1 while that for bis-naphthalimidocalix[4]arene-Cu(II) and cyanide ion it has been determined to be 1:2.     

A novel calix[4]arene fluorescent receptor for selective recognition of acetate anion

A novel bridged fluorescent calix[4]arene with 1,8-diaminoanthracene and glycine at the upper rim has been prepared, which exhibited selective recognition towards AcO⁻ over other anions such as F⁻, Cl⁻, Br⁻, , , I⁻ and by fluorescence spectroscopy and ¹H NMR method.     

A selective fluorescent probe for La and Y based on calix[6]arene

A new fluorescent probe based on calix[6]arene functionalized with three naphthoic acid groups was synthesized and showed selective fluorescence enhancement in the presence of La³⁺ and Y³⁺. In addition, the fluorescence enhancement behaviors depended on the pH values of the solution.     

Anthraquinone-modified calix[4]arene: click synthesis,selective calcium ion fluorescent chemosensor and INHIBIT logic gate

Novel anthraquinone-modified calix[4]arene was synthesized by click chemistry and exhibited selective fluorescent enhancement in the presence of Ca²⁺, which is attributed to photo-induced electron-transfer effect from the 1,2,3-triazole ring. The enhanced fluorescence was further quenched by F^?  ion. Thus, the potential Ca²⁺ and F^?  ion switched INHIBIT logic gate has been constructed.     

超分子自组装合成杯[4]芳烃黄原酸镍(Ⅱ)配合物

利用二维和三维的大环及笼状主体分子与金属离子直接进行自组装反应合成新型有机无机杂化分子是当前超分子领域的研究热点之一。这类分子不仅具有新奇的光、电、磁等特性，而且还可作为新型的主体分子在客体识别、催化、吸附与分离等方面有广阔的应用前景。杯芳烃是有机超分子领域广受     

A new colorimetric and fluorescent chemosensor based on thiacalix[4]arene for fluoride ions

A new thiacalix[4]arene based fluorescent chemosensor thiacalix[4]arene-N-(quinolin-8-yl)acetamide (TCAN8QA) has been synthesized. TCAN8QA has been found to exhibit highly selective behavior for F⁻ ions among all other anions, that is, Cl⁻, Br⁻, I⁻, PO₄⁻³, OH⁻, H₂PO₄⁻, and CH₃COO⁻ in the absorption spectra as well as in the emission spectra. Red shift and quenching in emission spectra constituting the signature for fluoride detection are due to photoinduced charge transfer (PCT) which can be attributed to deprotonation of acidic NH proton in the presence of fluoride ions.     

Polymeric membrane sodium-selective electrodes based on calix[4]arene ionophores

Six kinds of tetra alkylester type calix[4]arene derivatives, (R₁=R₂=CH₃1, C₂H₅2, C₃H₇3,n-C₄H₉4,t-C₄H₉5,n-C₁₀H₂₁6), a diethyl-didecyl mixed ester type (R₁=C₂H₅, R₂ =C₁₀H₂₁7), and three kinds of lower rim bridged types (R₁=C₂H₅, R₂–R₂=(CH₂)₁₀8, (CH₂)₁₂9, (CH₂)₂(OCH₂CH₂)₃10) were characterized by electrochemical measurement to elucidate the effect of the length of the alkyl group of alkoxycarbonyl substituents on Na⁺ selectivity. To obtain excellent Na⁺ selective ionophores, introduction of short chain alkyl groups rather than long chain ones, such as a decyl group, and maintenance of sufficient solubility of the calix[4]arene derivatives in the membrane solvent are required concurrently. Among the calix[4]arenes tested, 25,26,27,28-tetrakis[(ethoxycarbonyl)methoxy]-p-tert-butylcalix[4]arene2, and the diethyl-didecyl mixed ester type derivative7 are the best ionophores for a Na⁺ selective electrode. On the other hand, sodium selectivity of the bridged type derivative9 is comparable or even superior to that of the known bis(12-crown-4).This paper is dedicated to the commemorative issue on the 50th anniversary of calixarenes.     

A phenanthrene-based calix[4]arene as a fluorescent sensor for Cu and F

A new phenanthrene-based fluorescent calix[4]arene (4) has been synthesized in cone conformation. This compound was examined for its fluorescent properties towards different metal ions (Na⁺, Li⁺, Mg²⁺, Ni²⁺, Ba²⁺, Ca²⁺, Cu²⁺, Pb²⁺) and anions (F⁻, Cl⁻, Br⁻, H₂₄PO⁻,${{\text{H}}_2{\text{PO}}_4}^{-}\text{,}$₃NO⁻,${{\text{NO}}_3}^{-}\text{,}$₄HSO⁻,${{\text{HSO}}_4}^{-}\text{,}$ CH₃COO⁻) by fluorescence spectroscopy. The properties of the compound were evaluated and show that it is a fluorescence sensor for Cu²⁺ and F⁻. With the addition of Cu²⁺ and F⁻, the fluorescence was severely quenched.     

Ratiometric chemosensing of Mg ions by a calix[4]arene diamide derivative

A new chemosensor with a phenanthroimidazole subunit based upon calix[4]arene-diamide has been synthesized, and its Mg²⁺-selective fluoroionophoric properties were investigated in an aqueous DMSO solution. The compound exhibited a pronounced Mg²⁺-selective fluoroionophoric behavior over other physiologically relevant metal ions. A significant red shift in fluorescence emission (Δλ = 86 nm) provided the ratiometric determination as well as naked-eye detection of Mg²⁺ ions.     

Lower rim 1,3-di-amide-derivative of calix[4]arene possessing bis-{N-(2,2′-dipyridylamide)} pendants: a dual fluorescence sensor for Zn and Ni

Single crystal XRD structure of the lower rim 1,3-di-amide-derivative of calix[4]arene possessing bis-{N-(2,2′-dipyridylamide)} pendants (L) exhibit two distinct binding cores, viz., N₄ and O₆. L was found to be selective for Zn²⁺ by switch-on and for Ni²⁺ by switch-off fluorescence by forming 1:1 complexes. The binding and the composition of the complex formed have been addressed based on steady state and time-resolved fluorescence spectroscopy in addition to the absorption and ESI MS. As L can detect Zn²⁺ and Ni²⁺ to a concentration as low as 142 and 203 ppb, respectively, L can be a very sensitive molecular probe for these ions. The coordination details of the metal ion-bound complexes have been addressed based on ab initio calculations showing that the stabilization energies are commensurate with the coordination formed.     

Highly selective fluorescent recognition of amino alcohol based on chiral calix[4]arenes bearing L-tryptophan unit

Four two-armed chiral calix[4]arenes (1a–1d) functionalised at the lower ring with amino acid units have been synthesised and the structures of these compounds were characterised by IR, MS, ¹H NMR, ¹³C NMR spectra and elemental analysis. Their molecular recognition abilities towards amino alcohol were examined by fluorescence titration experiment in three kinds of solution. The results indicated that these receptors exhibited excellent fluorescent response to phenylglycinol and could distinguish phenylglycinol from phenylalaninol rapidly through the obvious difference in the fluorescent response. Solvent comparative experiments also indicated that acetonitrile was the best solvent to detect these phenomena.     

Highly selective fluorescent chemosensor for Na~+ based on pyrene-modified calix[4]arene derivative

A novel calix[4]arene derivative with pyrene fluorophores at the upper rim and tetraester ionophores at the lower rim was synthesized in six steps,and its structure was proved by NMR and ESI-MS spectro-scopies. Furthermore,the chemosensing behavior of the host compound for alkali and alkaline earth metal ions was investigated by fluorescence spectroscopy. The obtained results show that the calix-arene host can selectively bind sodium ion with the complexation stability constant of 2190 mol-1.L. The complexa...     

A new fluorogenic calix[4]arene N-dansylcarboxamide in the cone conformation for selective optical recognition of mercury(II)

A novel fluorogenic calix[4]arene dansylcarboxamide in the cone conformation has been synthesized as the disodium salt and employed in optical recognition of mercury(II). In extraction from aqueous solutions with high content of competing Na⁺ (C_Na+ ∼0.1 M; pH 5.0, acetate buffer) into CHCl₃, the fluoroionophore allowed for detection of 8.0 × 10⁻⁷ M Hg²⁺ (1:1 complex; ) with high selectivity over many other relevant metal ions.     

Fluorescence switch-on sensor for Cu by an amide linked lower rim 1,3-bis(2-picolyl)amine derivative of calix[4]arene in aqueous methanol

A highly selective fluorescence switch on sensor, L for detecting Cu²⁺ has been synthesized by introducing a bis-(2-picolyl)amine moiety at the lower rim of a calix[4]arene platform via amide linkage. Binding properties of L toward ten different biologically relevant Mⁿ⁺ ions have been studied by fluorescence and absorption spectroscopy in methanol and aqueous methanol. L was found to detect Cu²⁺ selectively down to a concentration of 196 and 341 ppb, respectively, in methanol and 1:1 aqueous methanol even in the presence of other metal ions. The composition of the complex has been found to be 1:1 based on the Job plot and is further confirmed by ESI MS. The role of calix[4]arene platform as well as the pre-organized binding core in the selective recognition of Cu²⁺ has been demonstrated by studying appropriate reference molecules. The possible modes of binding of L with Cu²⁺ have been modeled by computational calculations. L and its Cu²⁺ complex could very well be differentiated based on the nano-structural features observed in SEM and AFM.     

Highly selective fluorescent sensing of Pb by a new calix[4]arene derivative

A new chemosensor was synthesized by the alkylation of p-tert-butyl-calix[4]arene with three N,N-diethylacetamide groups and one methyl 3-ethoxy-naphthalene-2-carboxylate, which exhibited highly selective fluorescent response to Pb²⁺ over alkali, alkali earth metal ions and some transition metal ions in CH₃CN-H₂O.     

Excellent Ag+ selective receptors: Syntheses and complexation properties of novel biscalix[4]arene with benzalazine groups

By reacting mono-substituted or 1,3-bi-substituted [2-(p-formylphenyloxy)ethyloxy]-p-tert-butylcalix[4]arene (3 or 4) with hydrazine hydrate in ‘1+2’ or ‘2+2’ condensation mode, novel benzalazine-bridging biscalix[4]arenes 5 and 7 were conveniently obtained in the yields of 76 and 81%, respectively. Condensation of compound 4 and salicylide hydrazone gave a novel calix[4]arene benzalazine derivative 6 in the yield of 85%. The structures and conformations of all new compounds were characterised by elemental analyses, ESI-MS, ¹H NMR and ¹H–¹H COSY techniques. Biscalix[4]arene 7 adopts a symmetrical cone conformation with tube cavity. The liquid–liquid extraction experiment showed that all new hosts possessed excellent complexation abilities towards soft metal cations. Compound 7 exhibited high complexation selectivity towards Ag⁺. The Ag⁺/Na⁺ and Ag⁺/Hg²⁺ extraction percentages of host 7 were as high as 73.1 and 54.9, respectively. The UV–vis spectra complexation experiments revealed that the complexation constant of receptor 7 with Ag⁺ was 1.9 × 10⁵ M^? 1 and the 1:1 stoichiometry of receptor 7–Ag⁺ complex was formed. The ¹H NMR spectra complexation experiments suggested that Ag⁺ was bound in a cavity composed of two benzalazine groups on bridging chains.     

p-tert-Butyldihomooxacalix[4]arene/p-tert-Butylcalix[4]arene: Transition and Heavy Metal Cation Extraction and Transport Studies by Ketone and Ester Derivatives

The binding properties of two phenylketones (2a and 3a) and two ethylesters (2b and {3b) derived from p-tert-butyldihomooxacalix[4]arene or from p-tert-butylcalix[4]arene, in the cone conformation, towards transition (Ag⁺, Ni²⁺, Cu²⁺, Co²⁺, Zn²⁺, Fe²⁺ and Mn²⁺) and heavy (Cd²⁺, Hg²⁺ and Pb²⁺) metal cations have been determined by extraction studies with metal picrates and liquid membrane transport experiments with the same salts. The affinity of these ligands for Ag⁺ has also been investigated by ¹H NMR spectroscopy. Both ketones are better extractants than the esters, and show a strong preference for Ag⁺, while Cu²⁺ is the most extracted cation with the esters. ¹H NMR titrations with AgSO₃CF₃ indicate 1 : 1 complexes for all ligands, those with ketones are more stable, on the NMR time scale, than those with esters. Both esters are good carriers for Ag⁺, and 2b exhibits the highest transport rate (4.7 mol h^-1) found until now with dihomooxacalix[4]arene derivatives.