Manganese (II) selective PVC based membrane sensor using a Schiff base

N,N′,N″,N′′′-1,5,8,12-tetraazadodecane-bis(salicylaldiminato)(H₂L) has been used as ionophore for preparing Mn²⁺ selective sensor. Membranes of different composition with regard to ratio of H₂L:PVC:NPOE:NaTPB have been prepared and investigated. The best performance was obtained with the membrane of composition 10:150:150:10 (H₂L:PVC:NPOE:NaTPB) (w/w; mg). This membrane generated linear potential response in the concentration range of 5.0 × 10⁻⁶ to 1.0 × 10⁻¹ M with a Nernstian slope of 30.0 mV/decade of activity and fast response time (10 s). Hydrogen ion does not effect to the performance of sensor in the pH range 3.0-6.5. The sensor was found to be sufficient selective for Mn²⁺ over a number of alkali, alkaline and heavy metal ions and could therefore be used for the determination of manganese in various samples by direct potentiometry.     

Synthesis of the first examples of stable heterometallic isopropoxides of an organometallic RSn(IV) moiety

Five-, six-, and seven-coordinate volatile butyltin(IV) heterobimetallic derivatives, respectively of the types, [BuSn{(μ-OPrⁱ)₂Al(OPrⁱ)₂}Cl₂] (1), [BuSn{(μ-OPrⁱ)₂Al(OPrⁱ)₂}₂Cl] (2), and BuSn{(μ-OPrⁱ)₂M(OPrⁱ)_x − 2}₃ (3:M = Al (x = 4); 4:M = Ga (x = 4); 5:M = Nb (x = 6)) have been synthesized by the reactions of BuSnCl₃ with potassium tetraisopropoxoaluminate in 1:1, 1:2, and 1:3 molar ratios. Replacement reactions of chloride in (1) and (2) with appropriate alkoxometallate (tetraisopropoxoaluminate, tetraisopropoxogallate, or hexaisopropoxoniobate) ligands result in the formation of novel BuSn(IV) heterotri- and tetra-metallic derivatives. All of these derivatives have been characterized by elemental analyses, molecular weight measurements, and spectroscopic (IR, ¹H, ²⁷Al, and ¹¹⁹Sn NMR) studies. Based on these studies, plausible structures for the new derivatives involving bidentate ligation of the alkoxometallate ligands have been suggested.     

Theoretical studies on structures and spectroscopic properties of bis-cyclometalated iridium complexes [Ir(ppy)2X2]

The electronic structures and spectroscopic properties of a series of mixed bis-cyclometalated iridium(III) complexes [Ir(ppy)₂X₂]⁻ (X = CN, 1; X = NCS, 2; X = NCO, 3; ppy = 2-phenylpyridl) were investigated at the B3LYP/LANL2DZ and CIS/LANL2DZ levels. The calculated geometry parameters in the ground state are well consistent with the corresponding experimental values. The HOMO of 1 is dominantly localized on Ir atom and ppy ligand, but the HOMO of 2 and 3 have significant X ligand composition. Under the TD-DFT level with PCM model, the absorption and phosphorescence in CH₂Cl₂ media were calculated based on the optimized geometries in the ground and excited states, respectively. The lowest-lying absorption of 1 at 403 nm is attributed to {[d_x²-y²(Ir)+d_xy(Ir)+π(ppy)]→[π^∗(ppy)]} transition with metal-to-ligand and intraligand charge transfer (MLCT/ILCT) transition characters, whereas those of 2 (449 nm) and 3 (475 nm) are related to {[d_x²-y²(Ir)+d_xy(Ir)+π(ppy)+π(NCS/NCO)]→[π^∗(ppy)]} transition with MLCT/ILCT and ligand-to-ligand charge transfer (LLCT) transition characters. The phosphorescence of 1 at 466 nm can be described as originating from ³{[d_x²-y²(Ir)+d_xy(Ir)+π(ppy)][π^∗(ppy)]} excited state, while those of 2 (487 nm) and 3 (516 nm) originate from ³{[d_x²-y²(Ir)+d_xy(Ir)+π(ppy)+π(NCS/NCO)][π^∗(ppy)]} excited states. The calculated results showed that the transition character of the absorption and emission can be changed by adjusting the π electron-accepting abilities of the X ligands and the phosphorescent color can be tuned by altering the X ligands.     

Transition-metal complexes of phenoxy-imine ligands modified with pendant imidazolium salts: Synthesis, characterisation and testing as ethylene polymerisation catalysts

Reaction between 3-((1R,2R)-2-{[1-(3,5-di-tert-butyl-2-hydroxy-phenyl)-meth-(E)-ylidene]-amino}-cyclohexyl)-1-isopropyl-4-phenyl-3H-imidazol-1-ium bromide (1a) or the derivative 3-((1R,2R)-2-{[1-(2-hydroxy-5-nitro-phenyl)-meth-(E)-ylidene]-amino}-cyclohexyl)-1-isopropyl-4-phenyl-3H-imidazol-1-ium bromide (1b) and metal halides MCl_x.yTHF (M = Zr, x = 4, y = 2; M = V, x = y = 3; M = Cr, x = y = 3), in THF, at −78 °C gives the metal complexes of general formula [MCl_x(κ²-N,O-OC₆H₂R¹R²C(H)N-C₆H₁₀-Im)₂][Br]₂ (where M = Zr, x = 2, R¹ = R² = ^tBu, 2; M = Zr, x = 2, R¹ = H, R² = NO₂, 3; M = V, x = 1, R¹ = R² = ^tBu, 4; M = Cr, x = 1, R¹ = R² = ^tBu, 5; M = Fe, x = 0, R¹ = R² = ^tBu, 6; Im = 1-isopropyl-4-phenyl-3H-imidazol-1-ium-3-yl). ¹H and ¹³C NMR spectroscopy of 2 and 3 indicate κ²-N,O-ligand coordination via the phenoxy-imine moiety with pendant imidazolium salt that is corroborated by a single crystal structure of 6. Compounds 2, 3, 4 and 5 were tested as precatalysts for ethylene polymerisation in the presence of methylaluminoxane (MAO) cocatalyst, showing low activity. Selected polymer samples were characterised by GPC showing multimodal molecular weight distributions.     

Self-assembly of di- and triorganotin(IV) complexes: Syntheses, characterization and crystal structures of 1D polymeric chain containing O,O-diethyl or O,O-diisopropyl phosphoric acid ligands

A series of organotin(IV) complexes with O,O-diethyl phosphoric acid (L¹H) and O,O-diisopropyl phosphoric acid (L²H) of the types: [R₃Sn · L]_n (L = L¹, R = Ph 1, R = PhCH₂2, R = Me 3, R = Bu 4; L = L², R = Ph 9, R = PhCH₂10, R = Me 11, R = Bu 12), [R₂Cl Sn · L]_n (L = L¹, R = Me 5, R = Ph 6, R = PhCH₂7, R = Bu 8; L = L², R = Me 13, R = Ph 14, R = PhCH₂15, R = Bu 16), have been synthesized. All complexes were characterized by elemental analysis, TGA, IR and NMR (¹H, ¹³C, ³¹P and ¹¹⁹Sn) spectroscopy analysis. Among them, complexes 1, 2, 3, 5, 8, 9 and 11 have been characterized by X-ray crystallography diffraction analysis. In the crystalline state, the complexes adopt infinite 1D infinite chain structures which are generated by the bidentate bridging phosphonate ligands and the five-coordinated tin centers.     

Coordination compounds of N,N′-olefin functionalized imidazolin-2-ylidenes

N-Heterocyclic carbene ligands (NHC) were metalated with Pd(OAc)₂ or [Ni(CH₃CN)₆](BF₄)₂ by in situ deprotonation of imidazolium salts to give the N-olefin functionalized biscarbene complexes [MX₂(NHC)₂] 3-7 (3: M = Pd, X = Br, NHC = 1,3-di(3-butenyl)imidazolin-2-ylidene; 4: M = Pd, X = Br, NHC = 1,3-di(4-pentenyl)imidazolin-2-ylidene; 5: M = Pd, X = I, NHC = 1,3-diallylimidazolin-2-ylidene; 6: M = Ni, X = I, NHC = 1,3-diallylimidazolin-2-ylidene; 7: M = Ni, X = I, NHC = 1-methyl-3-allylimidazolin-2-ylidene). Molecular structure determinations for 4-7 revealed that square-planar complexes with cis (5) or trans (4, 6, 7) coordination geometry at the metal center had been obtained. Reaction of nickelocene with imidazolium bromides afforded the η⁵-cyclopentadienyl (η⁵-Cp) monocarbene nickel complexes [NiBr(η⁵-Cp)(NHC)] 8 and 9 (8: NHC = 1-methyl-3-allylimidazolin-2-ylidene; 9: NHC = 1,3-diallylimidazolin-2-ylidene). The bromine abstraction in complexes 8 and 9 with silver tetrafluoroborate gave complexes [NiBr(η⁵-Cp)(η³-NHC)] 10 and 11. The X-ray structure analysis of 10 and 11 showed a trigonal-pyramidal coordination geometry at the nickel(II) center and coordination of one N-allyl substituent.     

Comparative studies of praseodymium(III) selective sensors based on newly synthesized Schiff's bases

Praseodymium ion selective polyvinyl chloride (PVC) membrane sensors, based on two new Schiff's bases 1,3-diphenylpropane-1,3-diylidenebis(azan-1-ylidene)diphenol (M₁) and N,N′-bis(pyridoxylideneiminato) ethylene (M₂) have been developed and studied. The sensor having membrane composition of PVC: o-NPOE: ionophore (M₁): NaTPB (w/w; mg) of 150: 300: 8: 5 showed best performances in comparison to M₂ based membranes. The sensor based on (M₁) exhibits the working concentration range 1.0 × 10⁻⁸ to 1.0 × 10⁻² M with a detection limit of 5.0 × 10⁻⁹ M and a Nernstian slope 20.0 ± 0.3 mV decade⁻¹ of activity. It exhibited a quick response time as <8 s and its potential responses were pH independent across the range of 3.5-8.5.The influence of the membrane composition and possible interfering ions have also been investigated on the response properties of the electrode. The sensor has been found to work satisfactorily in partially non-aqueous media up to 15% (v/v) content of methanol, ethanol or acetonitrile and could be used for a period of 3 months. The selectivity coefficients determined by using fixed interference method (FIM) indicate high selectivity for praseodymium(III) ions over wide variety of other cations. To asses its analytical applicability the prepared sensor was successfully applied for determination of praseodymium(III) in spiked water samples.     

The cyclopalladation reaction of 2-phenylaniline revisited

2-Phenylaniline reacted with Pd(OAc)₂ in toluene at room temperature for 24 h in a one-to-one molar ratio and with the system PdCl₂, NaCl and NaOAc in a 1 (2-phenylaniline):1 (PdCl₂):2 (NaCl):1 (NaOAc) molar ratio in methanol at room temperature for one week to give the dinuclear cyclopalladated compounds (μ-X)₂[Pd{κ²-N2′,C1-2-(2′-NH₂C₆H₄)C₆H₄}]₂ [1a (X = OAc) and 1b (X = Cl)] in high yield. Moreover, the reaction between 2-phenylaniline and Pd(OAc)₂ in one-to-one molar ratio in acid acetic at 60 °C for 4 h, followed by a metathesis reaction with LiBr, allowed isolation of the dinuclear cyclopalladated compound (μ-Br)₂[Pd{κ²-N2′,C1-2-(2′-NH₂C₆H₄)C₆H₄}]₂ (1c) in moderate yield. A parallel treatment, but using monodeuterated acetic acid (DOAc) as solvent in the cyclopalladation reaction, allowed isolation of a mixture of compounds 1c, 1c_d1 [Pd{κ²-N2′,C1-2-(2′-NH₂C₆H₄)C₆H₄](μ-Br)₂[Pd{κ²-N2′,C1-2-(2′-NH₂C₆H₄)-3-d-C₆H₃] and 1c_d2 (μ-Br)₂[Pd{κ²-N2′,C1-2-(2′-NH₂C₆H₄)-3-d-C₆H₃}]₂ in moderate yield and with a deuterium content of ca. 60%. 1a and 1b reacted with pyridine and PPh₃ affording the mononuclear cyclopalladated compounds [Pd{κ²-N2′,C1-2-(2′-NH₂C₆H₄)C₆H₄}(X)(L)] [2a (X = OAc, L = py), 2b (X = Cl, L = py), 3a (X = OAc, L = PPh₃) and 3b (X = Cl, L = PPh₃)] in a yield from moderate to high. Furthermore, 1a reacted with Na(acac) · H₂O to give the mononuclear cyclopalladated compound 4 [Pd{κ²-N2′,C1-2-(2′-NH₂C₆H₄)C₆H₄}(acac)] in moderate yield. ¹H NMR studies in CDCl₃ solution of 2a, 2b, 3a, 3b and 4 showed that 2a and 3a presented an intramolecular hydrogen bond between the acetato ligand and the amino group, and were involved in a dynamic equilibrium with water present in the CDCl₃ solvent; and that the enantiomeric molecules of 2b and 4 were in a fast exchange at room temperature, while they were in a slow exchange for 2a, 3a and 3b. The X-ray crystal structures of 3b and 4 were determined. 3b crystallized in the triclinic space group with a = 9.9170(10), b = 10.4750(10), c = 12.0890(10) Å, α = 98.610(10)°, β = 94.034(10)° and γ = 99.000(10)° and 4 in the monoclinic space group P2₁/a with a = 11.5900(10), b = 11.2730(10), c = 12.2150(10) Å, α = 90°, β = 107.6560(10)° and γ = 90°.     

Synthesis and characterization of heterometallic Rh/Ru complexes supported by 1,2-dichalcogenolato-o-carborane ligands

The 16-electron half-sandwich complexes Cp^∗Rh[E₂C₂(B₁₀H₁₀)] (E = S, 1a; Se, 1b) react with [Ru(COD)Cl₂]_x under different conditions to give different types of heterometallic complexes. When the reactions were carried out in THF for 24 h, the binuclear Rh/Ru complexes [Cp^∗Rh(μ-Cl)₂(COD)Ru][E₂C₂(B₁₀H₁₀)] (E = S, 2a; Se, 2b) bridged by two Cl atoms and the binuclear Rh/Rh complexes (Cp^∗Rh)₂[E₂C₂(B₁₀H₁₀)] (E = S, 3a; Se, 3b) with direct Rh-Rh bond can be isolated in moderate yields. [Ru(COD)Cl₂] fragments in 2a and 2b have inserted into the Rh-E bond. If the [Ru(COD)Cl₂]_x was reacted with 1a in the presence of K₂CO₃ in methanol solution, the product [Cp^∗Rh(COD)]Ru[S₂C₂(B₁₀H₁₀]] (4a), K[(μ-Cl)(μ-OCH₃)Ru(COD)]₄ (5a) and 3a were obtained. The B(3)-H activation in complex 4a was found. However, when the reaction between 1b and [Ru(COD)Cl₂]_x was carried out in excessive NaHCO₃, the carborane cage opened products {Cp^∗Rh[S₂C₂(B₉H₁₀)]}Ru(COD) (6b), {Cp^∗Rh[S₂C₂(B₉H₉)]}Ru(COD)(OCH₃) (7b) and 3b were obtained. All complexes were fully characterized by their IR, ¹H NMR and elemental analyses. The molecular structures of 2a, 2b, 3b, 4a, 5a, and 7b have been determined by X-ray crystallography.     

Reactions of Mo(II)-tetraphosphine complex [MoCl2{meso-o-C6H4(PPhCH2CH2PPh2)2}] with a series of small molecules

Reactions of Mo(II)-tetraphosphine complex [MoCl₂(κ⁴-P4)] (2; P4 = meso-o-C₆H₄(PPhCH₂CH₂PPh₂)₂) with a series of small molecules have been investigated. Thus, treatment of 2 with alkynes RCCR′ (R = Ph, R′ = H; R = p-tolyl, R′ = H; R = Me, R′ = Ph) in benzene or toluene gave neutral mono(alkyne) complexes [MoCl₂(RCCR′)(κ³-P4)] containing tridentate P4 ligand, which were converted to cationic complexes [MoCl(RCCR′)(κ⁴-P4)]Cl having tetradentate P4 ligand upon dissolution into CDCl₃ or CD₂Cl₂. The latter complexes were available directly from the reactions of 2 with the alkynes in CH₂Cl₂. On the other hand, treatment of 2 with 1 equiv. of XyNC (Xy = 2,6-Me₂C₆H₃) afforded a seven-coordinate mono(isocyanide) complex [MoCl₂(XyNC)(κ⁴-P4)] (7), which reacted further with XyNC to give a cationic bis(isocyanide) complex [MoCl(XyNC)₂(κ⁴-P4)]Cl (8). From the reaction of 2 with CO, a mono(carbonyl) complex [MoCl₂(CO)(κ⁴-P4)] (9) was obtained as a sole isolable product. Reaction of 9 with XyNC afforded [MoCl(CO)(XyNC)(κ⁴-P4)]Cl (10a) having a pentagonal-bipyramidal geometry with axial CO and XyNC ligands, whereas that of 7 with CO resulted in the formation of a mixture of 10a and its isomer 10b containing axial CO and Cl ligands. Structures of 7 and 9 as well as [MoCl(XyNC)₂(κ⁴-P4)][PF₆](8′) and [MoCl(CO)(XyNC)(κ⁴-P4)][PF₆] (10a′) derived by the anion metathesis from 8 and 10a, respectively, were determined in detail by the X-ray crystallography.     

Chemically modified oximato complexes of titanium(IV) isopropoxide as new precursors for the sol-gel preparation of nano-sized titania: Crystal and molecular structure of [Ti{ONC10H16}4·2CH2Cl2]

Reactions of [Ti(OPrⁱ)₄] with various oximes, in anhydrous refluxing benzene yielded complexes of the type [Ti{OPrⁱ}_4−n{L}_n], where, n = 1-4 and LH = (CH₃)₂CNOH (1-4), C₉H₁₆CNOH (5-8) and C₉H₁₈CNOH (9-12). The compounds were characterized by elemental analyses, molecular weight measurements, FAB-mass, FT-IR and NMR (¹H, ¹³C{¹H}) spectral studies. The FAB-mass spectra of mono- (1), and di- (2), (6), (10) substituted products indicate their dimeric nature and that of tri- (3) and tetra- (4), (8) substituted derivatives suggest their monomeric nature. Crystal and molecular structure of [Ti{ONC₁₀H₁₆}₄·2CH₂Cl₂] (8A) suggests that the oximato ligands bind the metal in a dihapto η²-(N, O) manner, leading to the formation of an eight coordinated species. Thermogravimetric curves of (3), (6) and (10) exhibit multi-step decomposition with the formation of TiO₂ as the final product in each case, at 900 °C. Low temperature (∼600 °C) sol-gel transformations of (2), (3), (4), (6), (7) and (8) yielded nano-sized titania (a), (b), (c), (d), (e) and (f), respectively. Formation of anatase phase in all the titania samples was confirmed by powder XRD patterns, FT-IR and Raman spectroscopy. SEM images of (a), (b), (c), (d), (e) and (f) exhibit formation of nano-grains with agglomer like surface morphologies. Compositions of all the titania samples were investigated by EDX analyses. The absorption spectra of the two representative samples, (a) and (f) indicate an energy band gap of 3.17 eV and 3.75 eV, respectively.     

Fe Spin crossover materials based on dissymmetrical N4 Schiff bases including 2-pyridyl and 2R-imidazol-4-yl rings: Synthesis,crystal structure and magnetic and Mössbauer properties

The synthesis and characterization of new symmetrical Fe^II complexes, [FeL^A(NCS)₂] (1), and [FeL^Bx(NCS)₂] (2–4), are reported (L^A is the tetradentate Schiff base N,N′-bis(1-pyridin-2-ylethylidene)-2,2-dimethylpropane-1,3-diamine, and L^Bx stands for the family of tetradentate Schiff bases N,N′-bis[(2-R-1H-imidazol-4-yl)methylene]-2,2-dimethylpropane-1,3-diamine, with: R = H for L^B1 in 2, R = Me for L^B2 in 3, and R = Ph for L^B3 in 4). Single-crystal X-ray structures have been determined for 1 (low-spin state at 293 K), 2 (high-spin (HS) state at 200 K), and 3 (HS state at 180 K). These complexes remain in the same spin-state over the whole temperature range [80–400 K]. The dissymmetrical tetradentate Schiff base ligands L^Cx, N-[(2-R₂-1H-imidazol-4-yl)methylene]-N′-(1-pyridin-2-ylethylidene)-2,2-R₁-propane-1,3-diamine (R₁ = H, Me; R₂ = H, Me, Ph), containing both pyridine and imidazole rings were obtained as their [FeL^Cx(NCS)₂] complexes, 5–10, through reaction of the isolated aminal type ligands 2-methyl-2-pyridin-2-ylhexahydropyrimidine (R₁ = H, 5–7) or 2,5,5-trimethyl-2-pyridin-2-ylhexahydropyrimidine (R₁ = Me, 8–10) with imidazole-4-carboxaldehyde (R₂ = H: 5, 8), 2-methylimidazole-4-carboxaldehyde (R₂ = Me: 6, 9), and 2-phenyl-imidazole-4-carboxaldehyde (R₂ = Ph: 7, 10) in the presence of iron(II) thiocyanate. Together with the single-crystal X-ray structures of 7 and 9, variable-temperature magnetic susceptibility and Mössbauer studies of 5–10 showed that it is possible to tune the spin crossover properties in the [FeL^Cx(NCS)₂] series by changing the 2-imidazole and/or C2-propylene susbtituent of L^Cx.     

Synthesis, characterization and Schlenk equilibrium studies of methylmagnesium compounds with O- and N-donor ligands - the unexpected behavior of [MgMeBr(pmdta)] (pmdta = N,N,N′,N″,N″-pentamethyldiethylenetriamine)

MgMe₂ (1) was found to react with 1,4-diazabicyclo[2.2.2]octane (dabco) in tetrahydrofuran (thf) yielding a binuclear complex [{MgMe₂(thf)}₂(μ-dabco)] (2). Furthermore, from reactions of MgMeBr with diglyme (diethylene glycol dimethyl ether), NEt₃, and tmeda (N,N,N′,N′-tetramethylethylenediamine) in etheral solvents compounds MgMeBr(L), (L = diglyme (5); NEt₃ (6); tmeda (7)) were obtained as highly air- and moisture-sensitive white powders. From a thf solution of 7 crystals of [MgMeBr(thf)(tmeda)] (8) were obtained. Reactions of MgMeBr with pmdta (N,N,N′,N″,N″-pentamethyldiethylenetriamine) in thf resulted in formation of [MgMeBr(pmdta)] (9) in nearly quantitative yield. On the other hand, the same reaction in diethyl ether gave MgMeBr(pmdta) · MgBr₂(pmdta) (10) and [{MgMe₂(pmdta)}₇{MgMeBr(pmdta)}] (11) in 24% and 2% yield, respectively, as well as [MgMe₂(pmdta)] (12) as colorless needle-like crystals in about 26% yield. The synthesized methylmagnesium compounds were characterized by microanalysis and ¹H and ¹³C NMR spectroscopy. The coordination-induced shifts of the ¹H and ¹³C nuclei of the ligands are small; the largest ones were found in the tmeda and pmdta complexes. Single-crystal X-ray diffraction analyses revealed in 2 a tetrahedral environment of the Mg atoms with a bridging dabco ligand and in 8 a trigonal-bipyramidal coordination of the Mg atom. The single-crystal X-ray diffraction analyses of [MgMe₂(pmdta)] (12) and [MgBr₂(pmdta)] (13) showed them to be monomeric with five-coordinate Mg atoms. The square-pyramidal coordination polyhedra are built up of three N and two C atoms in 12 and three N and two Br atoms in 13. The apical positions are occupied by methyl and bromo ligands, respectively. Temperature-dependent ¹H NMR spectroscopic measurements (from 27 to −80 °C) of methylmagnesium bromide complexes MgMeBr(L) (L = thf (4); diglyme (5); NEt₃ (6); tmeda (7)) in thf-d₈ solutions indicated that the deeper the temperature the more the Schlenk equilibria are shifted to the dimethylmagnesium/dibromomagnesium species. Furthermore, at −80 °C the dimethylmagnesium compounds are predominant in the solutions of Grignard compounds 4-6 whereas in the case of the tmeda complex7 the equilibrium constant was roughly estimated to be 0.25. In contrast, [MgMeBr(pmdta)] (9) in thf-d₈ revealed no dismutation into [MgMe₂(pmdta)] (12) and [MgBr₂(pmdta)] (13) even up to −100 °C. In accordance with this unexpected behavior, 1:1 mixtures of 12 and 13 were found to react in thf at room temperature yielding quantitatively the corresponding Grignard compound 9. Moreover, the structures of [MgMeBr(pmdta)] (9c), [MgMe₂(pmdta)] (12c), and [MgBr₂(pmdta)] (13c) were calculated on the DFT level of theory. The calculated structures 12c and 13c are in a good agreement with the experimentally observed structures 12 and 13. The equilibrium constant of the Schlenk equilibrium (2 9c ? 12c + 13c) was calculated to be K_gas = 2.0 × 10⁻³ (298 K) in the gas phase. Considering the solvent effects of both thf and diethyl ether using a polarized continuum model (PCM) the corresponding equilibrium constants were calculated to be K_thf = 1.2 × 10⁻³ and K_ether = 3.2 × 10⁻³ (298 K), respectively.     

Synthesis and characterization of N-(2-pyridyl)benzamide-based nickel complexes and their activity for ethylene oligomerization

A series of N-(2-pyridyl)benzamides (1)-(11) and their nickel complexes, [N-(2-pyridyl)benzamide]dinickel(II) di-μ-bromide dibromide (12)-(16) and (aryl)[N-(2-pyridyl)benzamido](triphenylphosphine)nickel(II) (17)-(24), were synthesized and characterized. The single-crystal X-ray analysis revealed that 12 and 14 are binuclear nickel complexes bridged by bromine atoms and each nickel atom adopts a distorted trigonal bipyramidal geometry. The key feature of the complexes 17, 19 and 23 is each has a six-membered nickel chelate ring including a deprotonated secondary nitrogen atom and an O-donor atom. The nickel complexes show moderate to high catalytic activity for ethylene oligomerization with methylaluminoxane (MAO) as cocatalyst. The activity of 12-16/MAO systems is up to 3.3 × 10⁴ g mol⁻¹ h⁻¹ whereas for 17-24/MAO systems it is up to 4.94 × 10⁵ g mol⁻¹ atm⁻¹ h⁻¹. The influence of Al/Ni molar ratio, reaction temperature, reaction period and PPh₃/Ni molar ratio on catalytic activity was investigated.     

A “sodium trap” based on benzo-15-crown-5 with an exocyclic N-(thiophosphoryl)thiourea moiety

For N-(thio)phosphorylthioureas of the common formula RC(S)NHP(X)(OiPr)₂HL^I (R = N-(4′-aminobenzo-15-crown-5), X = S), HL^II (R = N-(4′-aminobenzo-15-crown-5), X = O), HL^III (R = PhNH, X = S), HL^IV (R = PhNH, X = O), and (N,N′-bis-[C(S)NHP(S)(OiPr)₂]₂-1,10-diaza-18-crown-6) H₂L^V, salts LiL^I,III,IV, NaL^I–IV, KL^I–IVM₂L^V (M = Li⁺, Na⁺, K⁺), Ba(L^I,III,IV)₂, and BaL^V have been synthesized and investigated. Compounds NaL^I,II quantitatively drop out as a deposit in ethanol medium, allowing the separation of Na⁺ and K⁺ cations. This effect is not displayed for the other compounds. The crystal structures of HL^III and the solvate of the composition [K(Me₂CO)L^III] have been investigated by X-ray crystallography.     

Cyclopentadienylaluminum donor-acceptor complexes - Molecular and supramolecular structure

Lewis acid-base complexes of cyclopentadienylaluminum derivatives Me_xCp_3−x Al (x = 0-2) and trimethylaluminum with selected aromatic amines (L): dmap = 4-dimethylaminopyridine, py-Me = 4-methylpyridyne, were synthesized and characterized by ¹H, ¹³C, ²⁷Al NMR: Cp₃Al · dmap (1), Cp₃Al · py-Me (2), MeCp₂Al · dmap (3), MeCp₂Al · py-Me (4), Me₂CpAl · dmap (5), Me₂CpAl · py-Me (6), Me₃Al · py-Me (7). ¹H NMR studies of 3-6 revealed small amounts of the ligand redistribution products. The crystal structures of 1, 2 and 3 were determined by single X-ray diffraction studies. The compounds 1, 2 and 3 are monomeric with Cp ligands bonded to the aluminum center in η¹(σ), η¹(π) manner. The change of Cp-Al bond character from η¹(π) to η¹(σ) was found to reasonable correlate with the aromaticity of Cp⁻ ligand described by HOMA index. Analysis of close intra- and intermolecular contacts showed presence of CH?π interactions leading to the formation of 2-D supramolecular networks. It was found that these interactions impact on the coordination sphere of aluminum and the conformation of Cp ring.     

Structural characterization of five-coordinate copper(II), nickel(II), and cobalt(II) thiocyanato complexes derived from bis(2-(3,5-dimethyl-1-pyrazolyl)ethyl)amine

The reaction of M(ClO₄)₂·6H₂O with NH₄NCS in presence of the organic sterically hindered bis(2-(di-3,5-dimethyl-1-pyrazolyl)ethyl)amine (bedmpza) afforded the five-coordinate mononuclear dithiocyanato-M(II) complexes [M(bedmpza)(NCS)₂]·xMeOH (1: M = Cu²⁺, x = 0; 2: M = Ni²⁺, x = 0; 3: M = Co²⁺, x = 0.84). The compounds which proved to be non-electrolytes were characterized by IR and UV-Vis spectroscopy and their molecular structures were determined by single-crystal X-ray crystallography. In these complexes, the five-coordinate geometry was achieved by the three N-donors of the ligand bedmpza and two N atoms of the terminal thiocyanato ligands. The Cu(II) complex exists in two polymorphs 1-I and 1-II: an intermediate five-coordinate geometry with the two thiocyanato ligands are arranged as cisoid in 1-I and distorted square pyramidal geometry with the thiocyanato ligands are in transoid orientation in 1-II. Although the later geometry was also observed in the nickel complex 2, distorted trigonal bipyramidal geometry was found in 3. Each complex forms hydrogen bonds of type N-H?S from the secondary amine N(3) donor atoms to the adjacent terminal S(1) acceptor atoms of the thiocyanate group. The thermal behavior of the two polymorphs 1-I and 1-II were similar and no significant differences were observed between the two complexes.     

Synthesis and structures of CpFe(CO)2(κE-ECS2Ph) and [CpFe(CO)(κS,E-ECS2Ph)] (E = S,Se)

The iron trithiocarbonato complex CpFe(CO)₂(κS-SCS₂Ph) (1a) and its selenodithiocarbonato analogue CpFe(CO)₂(κSe-SeCS₂Ph) (1b) were generated by room temperature reactions of (μ-E_x)[CpFe(CO)₂]₂ (E = S; x = 2, 3. E = Se; x = 1) with PhSC(S)Cl. These compounds can be converted into the complexes CpFe(CO)(κ²S,E-ECS₂Ph) [E = S (2a), Se (2b)], in which the trithiocarbonato or the selenodithiocarbonato ligand is bonded to the iron in a chelate form, under photolytic conditions. The composition and structure of all products have been verified by elemental analyses, IR and ¹H NMR spectroscopies. The crystal structures for compounds 1a, 1b, and 2b show a three-legged piano-stool configuration at Fe in each complex. The spectroscopic and structural data in this work are commensurate with the electronic factor of the S- and Se-donor ligands.     

Syntheses,structures and hydrolytic properties of copper(II) complexes of asymmetrically N-functionalised 1,4,7-triazacyclononane ligands

A series of new asymmetrically N-substituted derivatives of the 1,4,7-triazacyclononane (tacn) macrocycle have been prepared from the common precursor 1,4,7-triazatricyclo[5.2.1.0^4,10]decane: 1-ethyl-4-isopropyl-1,4,7-triazacyclononane (L1), 1-isopropyl-4-propyl-1,4,7-triazacyclononane (L2), 1-(3-aminopropyl)-4-benzyl-7-isopropyl-1,4,7-triazacyclononane (L3), 1-benzyl-4-isopropyl-1,4,7-triazacyclononane (L4) and 1,4-bis(3-aminopropyl)-7-isopropyl-1,4,7-triazacyclononane (L5). The corresponding monomeric copper(II) complexes were synthesised and were found to be of composition: [Cu(L1)Cl₂] · 1/2 H₂O (C1), [Cu(L4)Cl₂] · 4H₂O (C2), [Cu(L3)(MeCN)](ClO₄)₂ (C3), [Cu(L5)](ClO₄)₂ · MeCN · NaClO₄ (C4) and [Cu(L2)Cl₂] · 1/2 H₂O (C5). The X-ray crystal structures of each complex revealed a distorted square-pyramidal copper(II) geometry, with the nitrogen donors on the ligands occupying 3 (C1 and C2), 4 (C3) or 5 (C4) coordination sites on the Cu(II) centre. The metal complexes were tested for the ability to hydrolytically cleave phosphate esters at near physiological conditions, using the model phosphodiester, bis(p-nitrophenyl)phosphate (BNPP). The observed rate constants for BNPP cleavage followed the order k_C1 ≈ k_C2 > k_C5 ? k_C3 > k_C4, confirming that tacn-type Cu(II) complexes efficiently accelerate phosphate ester hydrolysis by being able to bind phosphate esters and also form the nucleophile necessary to carry out intramolecular cleavage. Complexes C1 and C2, featuring asymmetrically disubstituted ligands, exhibited rate constants of the same order of magnitude as those reported for the Cu(II) complexes of symmetrically tri-N-alkylated tacn ligands (k ∼ 1.5 × 10⁻⁵ s⁻¹).