Dibenzyl Structuresin a Macromolecular Chain. III. Dibenzyldiisocyanates Reactivity

The reactivity of the 2,2′-, 2,4′-, 4,4′-dibenzyldiisocyanate (2,2′-, 2,4′-, 4,4′-DBDI) with n-butanol in benzene has been studied. The concentrations of all species were monitored by using high performance liquid chromatography (HPLC). The reactivity of 4,4′-DBDI is similar to that of 4,4′-diphenylmethanediisocyanate (4,4′-MDI). Very strong intramolecular catalytic effects were noticed in the case of 2,2′-DBDI, probably due to the variable molecular geometry. These effects are responsible for the whole reaction pattern. The 2,4′-DBDI NCO ortho and para groups reactivities are different and comparable to that of 2,4-toluylenediisocyanate (2,4-TDI).     

Synthesis and studies of homopolyamides based on 2,4-bis(6-chlorocarbonyl-2-naphthyloxy)-6-(4-methyl-1-piperazinyl)-s-triazine

Abstract  

Ten homopolyamides have been synthesized by polycondensation of the monomer 2,4-bis(6-chlorocarbonyl-2-naphthyloxy)-6-(4-methyl-1-piperazinyl)-s-triazine and different diamines such as 4,4′-biphenyldiamine, 4,4′-diaminobenzanilide, 4,4′-diaminodiphenylmethane, 4,4′-diaminodiphenyl sulfone, 4,4′-diaminodiphenyl sulfonamide, 2,4-diaminotoluene, o-phenylenediamine, m-phenylenediamine, p-phenylenediamine, and ethylenediamine. All polyamides were characterized by solubility, density, viscosity measurements, IR, NMR spectroscopy, and thermogravimetric analysis. The products were found to possess high thermal stability.     

Synthesis of Isatin Derivatives

Reactions were studied of isatin sodium salt with bromocyclohexane, p-ethoxyphenyl chloroethyl ketone, 4,4'-di(chloromethyl)biphenyl, and 4,4'-(dichloromethyl)diphenylmethane. N-cyclohexylisatin, p-ethoxyphenyl N-isatinoethyl ketone, 4,4'-di(N-isatinomethyl)biphenyl, 4-chloromethyl-4'(N-isatinomethyl)biphenyl, 4,4'-di(N-isatinomethyl)diphenylmethane, 4-chloromethyl-4'(N-isatinomethyl)diphenylmethane, and 4-(N-morpholinomethyl)-4'-(N-isatinomethyl)diphenyl were synthesized.     

Synthesis and crystal structures of 3D supramolecular compounds: [ M (4,4′-bipy)2(H2O)4] · (4,4′-bipy)2 · (3,5-daba)2 · 8H2O ( M =Zn,Mn)

Two new supramolecular compounds [M(4,4′-bipy)₂ (H₂O)₄] ·?(4,4′-bipy)₂ ·?(3,5-daba)₂ ·?8H₂O (M=Zn(1) or Mn(2), 4,4′-bipy =?4,4′-bipyridine, 3,5-daba =?3,5-diaminobenzoic acid anion) were synthesized and characterized by elemental analysis and X-ray crystal diffraction. In [M(4,4′-bipy)₂(H₂O)₄]²⁺, the M(II) is coordinated by two nitrogen atoms from two 4,4′-bipy molecules and four oxygen atoms from four waters to form an octahedral configuration. There exist uncoordinated 4,4′-bipy molecules, 3,5-diaminobenzolate counterions and water guests in the compounds. The 3D structures of the title supramolecular compounds are constructed by rich hydrogen bonds among [M(4,4′-bipy)₂(H₂O)₄]²⁺, uncoordinated 4,4′-bipy molecules, water molecules and 3,5-daba, containing a diverting hexa-member water ring.     

Aggregation of Macromolecules in Solution and Cluster Structure of the Surface of Films of Aromatic Polyetherimide

The structural parameters of the aggregates of macromolecules of linear flexible-chain poly{N,N'- bis[4,4'-sulfonylbis(4,4'-phenoxyphenyl)][4,4'-(1,3-phenylenedioxy)bis(phthalimide)} in N-methyl-2-pyrroli- done solution and of the clusters of macromolecules on the surface of polyetherimide films formed from the solution were calculated from the capillary-viscometric and electron-microscopic data using the cluster model.     

Synthesis of polyesters by the polyaddition of bis(oxetane)s with active di(ester)s

The polyaddition of bis(oxetane)s 1,4‐bis[(3‐ethyl‐3‐oxetanylmethoxymethyl)]benzene (BEOB), 4,4′‐bis[(3‐ethyl‐3‐oxetanyl)methoxy]benzene (4,4′‐BEOBP), 1,4‐bis[(3‐ethy‐3‐oxetanyl)methoxy] ‐benzene (1,4‐BEOMB), 1,2‐bis[(3‐ethyl‐3‐oxetanyl)methoxy]benzene (1,2‐BEOMB), 4,4‐bis[(3‐ethyl‐3‐oxetanyl)methoxy]biphenyl (4,4′‐BEOMB), 3,3′,5,5′‐tetramethyl‐[4,4′‐bis(3‐ethyl‐3‐oxetanyl)methoxy]biphenyl (TM‐BEOBP) with active diesters di‐s‐phenylthioterephthalate (PTTP), di‐s‐phenylthioisoterephthalate (PTIP), 4,4′‐di(p‐nitrophenyl)terephthalate (NPTP), 4,4′‐di(p‐nitrophenyl)isoterephthalate (NPIP) were carried out in the presence of tetraphenylphosphonium chloride (TPPC) as a catalyst in NMP for 24 h, affording corresponding polyesters with M_n's in the range 2200–18,200 in 41–98% yields. The obtained polymers would soluble in common organic solvents and had high thermal stabilities. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1528–1536, 2004     

Chemical constitution and activity of bipyridylium herbicides. Part IX. N-alkoxy quaternary salts of 4,4′bipyridyl

4,4′-Bipyridyl N-oxide and 4,4′-bipyridyl N,N'-dioxide react with alkating agents to afford N-alkoxy N'-alkyl and N,N'-dialkoxy diquaternary salts of 4,4′-bipyridyl respectively. The diquaternary salts were very much less active as herbicides than paraquat. Unlike paraquat they cannot be regarded as reversible one electron transfer systems.     

Heat-curable polyaromatic keto-ether-sulfones. XIV. More polymers with 2,2′-diphenylethynyl-4,4′-diphenyl units and their rearrangement products

Polymers were prepared from 4,4′-diphenoxydiphenylsulfone, isophthaloyl dichloride, and bis-p-phenoxyphenyl-4,4′-(2,2′-dibromodiphenyl)ketone, 2,2′-dibromodiphenyl-4,4′-dicarbonyl dichloride, or bis-p-phenoxyphenyl-4,4′-(2,2′-diphenylethynyldiphenyl)ketone in Friedel-Crafts type of polymerization. Bromine groups were subsequently replaced with phenylacetylene residues, and the polymers were cured at high temperatures, with the apparent formation of benzanthracene linkages. Cured polymers exhibited higher softening points, decreased solubilities, and, in some instances, higher melting points than their uncured precursors. Significant weight losses occurred during isothermal aging tests.     

Synthesis and mesogenic properties of four series of polyesters derived from dicarboxylic and dihydroxylic aromatic monomers

Some members of four series of polyesters were synthesized by the direct polycondensation of two types of dicarboxylic acids (4,4′-dicarboxy-α,ω-diphenoxyalkanes and 4,4′-dicarboxy-α,ω-dibenzoyloxyalkanes) with two types of bisphenols (4,4′-dihydroxy-α,ω-diphenoxyalkanes and 4,4′-dihydroxy-α,ω-dibenzoyloxyalkanes) using tosyl chloride in pyridine in the presence of N, N-dimethylformamide. The ¹H-NMR spectra of the polymers synthesized showed that these polymers have an ordenated structure. The mesogenic properties of these polymers were studied by optical microscopy and differential scanning calorimetry. Many of the polymers show nematic mesomorphism.     

Synthesis and comparative study on polyetherimides from isomeric 4,4′-isopropylidenediphenoxy bis(phthalic anhydride)s

Two isomers of commercial 4,4′-(4,4′-isopropylidenediphenoxy) bis(phthalic anhydride) (4,4′-BPADA), that is, 3,4′-(4,4′-isopropylidenediphenoxy) bis(phthalic anhydride) (3,4′-BPADA) and 3,3′-(4,4′-isopropylidenediphenoxy) bis(phthalic anhydride) (3,3′-BPADA), were synthesized through aromatic nucleophilic substitution from nitrophthalonitrile and bisphenol A. 3,4′-BPADA was first synthesized from two intermediates, that is, 3-(4-[4-hydroxyphenylisopropylidene] phenoxy) phthalonitrile (3-BPADN) and 3,4′-(4,4′-isopropylidenediphenoxy) bis(phthalonitrile) (3,4′-BPATN). The corresponding three series of polyetherimides (PEIs) were prepared with two representative aromatic diamines (4,4′-oxydianiline and m-phenylenediamine (m-PDA)) via two-step procedure and chemical imidization. Isomeric polyimides showed T_gs from 206 to 256°C in nitrogen and T_d5%s from 488 to 511°C in argon, good mechanical properties (tensile moduli of 2.3–3.3 GPa, tensile strengths of 70–96 MPa, and elongations at break of 3.2%–5.1%), and good solubility. With the introduction of 3-substituted phthalimide unit, PEIs displayed higher T_g values, lower strengths and elongations, better solubility and larger d-spacings. The rheological properties of thermoplastic polyimide resins based on the BPADA isomers were investigated, which showed that polyetherimide PEI-3b derived from 3,3′-BPADA and m-PDA had the lowest melt viscosity among the isomers, indicating that the melt processibility had been greatly improved.     

Design of postmetallocene catalytic systems of aryliminetype for olefins polymerization: XIII. Synthesis of tetradentate bis(2-hydroxy-1-naphthaldimine) ligands and their complexes with titanium(IV) dichloride

Reactions of 2-hydroxy-1-naphthaldehyde with 1,4-diaminobutane, 1,6-diaminohexane, 4,4′-methylenedianiline and its alkyl- and cycloalkyl-sybstituted derivatives, with 4,4′-sulfonyldianiline, 2,2′- and 4,4′-oxydianiline, 4,4′-(1,4-phenylenebisoxy)dianiline, 4,4′-[propane-2,2-diylbis(1,4-phenylenebisoxy)]dianiline, and p-terphenyl-4,4″-diamine afforded a series of the corresponding diimines that at treating with TiCl₂(OPr-i)₂ formed mono- and binuclear complexes of titanium(IV) dichloride with tetradentate ligands LTiCl₂ and L₂(TiCl₂)₂.     

Synthesis of optically active poly(amide‐imide)s derived from N,N′‐(4,4′‐carbonyldiphthaloyl)‐bis‐L‐leucine diacid chloride and aromatic diamines by microwave radiation

3,3′,4,4′‐benzophenonetetracarboxylic dianhydride (4,4′‐carbonyldiphathalic anhydride) was reacted with L ‐leucine in a mixture of acetic acid and pyridine (3 : 2), and the resulting imide‐acid [N,N′‐(4,4′‐carbonyldiphthaloyl)‐bis‐L ‐leucine diacid] was obtained in quantitative yield. The compound was converted to the N,N′‐(4,4′‐carbonyldiphthaloyl)‐bis‐L ‐leucine diacid chloride by reaction with thionyl chloride. A new facile and rapid polycondensation reaction of this diacid chloride with several aromatic diamines such as 4,4′‐diaminodiphenyl methane, 2,4‐diaminotoluene, 4,4′‐sulfonyldianiline, p‐phenylenedi‐amine, 4,4′‐diaminodiphenylether, and m‐phenylenediamine was developed by using a domestic microwave oven in the presence of a small amount of a polar organic medium such as O‐cresol. The polymerization reactions proceeded rapidly compared with the conventional solution polycondensation and were completed within 6 min, producing a series of optically active poly(amide‐imide)s with a high yield and an inherent viscosity of 0.37–0.57 dL/g. All of the above polymers were fully characterized by IR, elemental analyses, and specific rotation. Some structural characterization and physical properties of these optically active poly(amide‐imide)s are reported. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 177–186, 2001     

Suzuki Cross‐coupling Method to Prepare 4,4″‐Diamino‐p‐terphenyl

The synthesis of 4,4″‐dinitro‐p‐terphenyl is accomplished by double Suzuki cross‐coupling. The product was reduced catalytically to give 4,4″‐diamino‐p‐terphenyl in 75% overall yield.     

Oxidation of 3,5,3',5'-Tetra-tert-butyl-4,4'-dihydroxybiphenyl with Atmospheric Oxygen in the Absence of Base Catalysts

Use of dimethylformamide as solvent and preliminary addition of 3,5,3',5'-tetra-tert-butyl-4,4'-diphenoquinone allow oxidation of 3,5,3',5'-tetra-tert-butyl-4,4'-dihydroxybiphenyl with atmospheric oxygen to be efficiently performed in the absence of base catalysts.     

Dynamic mechanical relaxation effects in some poly(arylene sulfones)

Poly-4,4′-oxydiphenylenesulfonyl and poly-4,4′-methylenediphenylenesulfonyl were synthesized by an electrophilic substitution polymerization of the arylene monosulfonyl chloride monomers. The glass-transition temperatures T_g of these polymers were determined by calorimetric and dynamic mechanical measurements, and the number-average molecular weights were determined by vapor-pressure osmometry. Both polymers were found to have the same T_g at equivalent molecular weight; the limiting value at high molecular weight is 238°C. Both polymers have two dynamic mechanical relaxation peaks at temperatures far below T_g. One is in the neighborhood of 0°C, and the other is at ?110°C. Plausible origins for these relaxations, and the absence of any near 0°C in poly(4,4′-isopropylidenediphenylene-co-4,4′-sulfonyldiphenylene dioxide), are discussed.     

Synthesis and alkylation of new functionally substituted 4,4-dimethylpiperidin-2-ones

The reaction of ethyl isopropylidenecyanoacetate with ethyl 3-amino-3-thioxopropanoate gave rise to ethyl 4,4-dimethyl-6-oxo-2-thioxo-5-cyanopiperidine-3-carboxylate whose alkylation provided ethyl 2-benzylsulfanyl-4,4-dimethyl-6-oxo-5-cyano-1,4,5,6-tetrahydropyridine-3-carboxylate, ethyl 5-benzyl-2-benzylsulfanyl-4,4-dimethyl-6-oxo-5-cyano-1,4,5,6-tetrahydropyridine-3-carboxylate, and ethyl 7,7-dimethyl-5-oxo-6-cyano-3,5,6,7-tetrahydro-2H-thiazolo[3,2-a]pyridine-8-carboxylate.     

New Lignans from the Aerial Parts of Rudbeckia laciniata

Three new furofuran lignans, (+)‐4,4′‐O‐diangeloylpinoresinol ( 1 ), (+)‐4,4′‐O‐diangeloylmedioresinol ( 2 ), and (+)‐4,4′‐O‐diangeloylsyringaresinol ( 3 ), together with the known compound (+)‐syringaresinol, were isolated from the MeOH extract of Rudbeckia laciniata. The structure elucidation of these compounds were based on 1D‐ and 2D‐NMR, and HR‐ESI‐MS data. The additional structural evidence was obtained from alkaline hydrolysis of the compounds.     

Reaction of acetone oxime with dialkylmalonyl chlorides. Synthesis of 2-(2-propenyl)isoxazolidine-3,5-diones and 2,2-bis-(2-(4,4-dialkylisoxazolidine-3,5-dione))propanes

Reaction of acetone oxime with dialkylmalonyl chlorides in the presence of triethylamine gave as products 2-(2-propenyl)-4,4-dialkylisoxazolidine-3,5-diones 4 and 2,2-bis-(2-(4,4-dialkylisoxazolidine-3,5-dione))propanes 5 . The 4,4-dialkylisoxazolidine-3,5-diones 6 and dimethylketoximyl 4,4-dialkylmalonates 7 were formed as minor products. Compounds 4 are stable in refluxing ethanol and in aqueous solution. Compounds 5 are stable when heated in refluxing toluene in the presence of either pyridine or monochloroacetic acid.     

The layered compound poly[μ2‐4,4′‐bipyridyl‐di‐μ2‐chlorido‐mercury(II)]

The title compound, [HgCl₂(C₁₀H₈N₂)]_n, features two‐dimensional [HgCl₂(4,4′‐bipy)]_n neutral networks (4,4′‐bipy is 4,4′‐bipyridine), based on an octahedral Hg atom coordinated by four μ₂‐Cl atoms and two μ₂‐4,4′‐bipy ligands in trans positions, yielding a HgCl₄N₂ octahedron. The structure has mmm symmetry about the Hg atoms, with most of the atoms on at least one mirror plane, but the unsubstituted C atoms of the 4,4′‐bipy rings are disordered across a mirror plane. Photoluminescent investigations reveal that the title compound displays a strong emission in the green region, which probably originates from a ligand‐to‐ligand charge‐transfer transition.     

Synthesis of 4,4-dimethyl-3,4-dihydro-3,3,5-trisubstituted-2H-pyrazoles and N-benzoyl derivatives: Method for “Hydrolysis” of unreactive amides and carbamates

Addition of organolithium reagents to 4,4-dimethyl-3,5-disubstituted-4H-pyrazoles produced a series of 4,4-dimethyl-3,4-dihydro-3,3,5-trisubstituted-2H-pyrazoles, 2–6 , in good yield. The reaction was stereoselective: addition of organolithium compounds occurred only to carbon-3 of 4,4-dimethyl-3-alkyl-5-aryl-4H-pyrazoles. The 3,4-dihydro-2H-pyrazoles were found to be of high sensitivity to oxygen. For long term storage and ease of handling, N-benzoyl derivatives were synthesized. Removal of the protecting group could not be accomplished by use of many standard sets of conditions. Deprotection was accomplished in high yield by reaction of the N-benzoyl-4,4-dimethyl-3,4-dihydro-3,3,5-trisubstituted-2H-pyrazoles with anhydrous potassium t-butoxide in toluene [heated under reflux (ultra-pure argon)] in the presence of a phase transfer catalyst (18-Crown-6). Cleavage of a N-carbamate derivative was also achieved by this phase transfer approach. This methodology should be applicable to the hydrolysis of unreactive amides and carbamates in general.