Reactivity of hydrogen with solid-state films of alkylamine- and tetraoctylammonium bromide-stabilized Pd, PdAg, and PdAu nanoparticles for sensing and catalysis applications

Hydrogen gas spontaneously adsorbs to Pd metal as atomic hydrogen and diffuses into the lattice to form PdHx. We previously showed that films of hexanethiolate-coated Pd monolayer-protected clusters (MPCs) do not readily react with H2 due to the strong chemical bonding of the thiolate to the Pd, which inhibits the reaction. Consequently, these films require ozone or heat treatment for reactivity to occur, which is inconvenient for sensing or catalysis applications. In this report, we describe the reactivity between H2 and solid-state films of alkylamine-coated Pd, PdAg (10:1), and PdAu (10:1) MPCs and films of tetraoctylammonium bromide (TOABr)-stabilized Pd and PdAg (10:1) nanoparticles as determined by changes in film conductivity. Our data show that Pd nanoparticles coated with these more weakly coordinated amine or ammonium groups readily react with H2 without any need for ozone or heat treatment. The conductivity of films of octylamine (C8NH2)- or dodecylamine (C12NH2)-coated Pd, PdAg, and PdAu MPCs increases irreversibly upon initial exposure to 100% H2 to varying degrees and with different reaction kinetics and then exhibits stable, reversible changes in the presence of H2 concentrations ranging from 9.6 to 0.08%. The behavior upon initial exposure to H2 (conditioning) and the direction and magnitude of the reversible conductivity changes depend on the alkyl chainlength and alloy composition. Films of TOABr-coated Pd and PdAg nanoparticles show stable, reversible increases in conductivity in the presence of H2 concentrations from 9.6 down to 0.11% without conditioning. Surface FTIR spectroscopy and atomic force microscopy (AFM) provide information about the organic monolayer and film morphology, respectively, following reactivity with H2. This work demonstrates a simple approach toward preparing films of chemically synthesized Pd-containing nanoparticles with controlled reactivity to H2 for sensing and catalysis applications.     

Ozone- and thermally activated films of palladium monolayer-protected clusters for chemiresistive hydrogen sensing

Here we describe the chemiresistive H2-sensing properties of drop-cast films comprised of 3.0 nm average diameter hexanethiolate-coated Pd monolayer-protected clusters (C6 Pd MPCs) bridging a pair of electrodes separated by a 23 microm gap. The gas-sensing properties were measured for 9.6-0.11% H2 in a H2/N2 mixture. The sensing mechanism is based on changes in the resistance of the film upon reaction of Pd with H2 to form PdH(x), which is known to be larger in volume and more resistive than pure Pd. As-prepared Pd MPC films are highly insensitive to H2, requiring O3 and thermal treatment to enhance changes in film resistance in the presence of H2. Exposure to O3 for 15 min followed by activation in 100% H2 leads to an increase in film conductivity in the presence of H2, with a detection limit of 0.11% H2. When exposed to temperatures of 180-200 degrees C, the conductivity of the film increases and a decrease in conductivity occurs in the presence of H2 with a detection limit of 0.21%. The sensing behavior reverses after further heating to 260 degrees C, exhibiting an increase in conductivity in the presence of H2 as in O3-treated films and a detection limit of 0.11%. The sensitivity of the variously treated films follows the order O3 > high temp > low temp, and the response times at 1.0% H2 range from 10 to 50s, depending on the treatment. FTIR spectroscopy, Raman spectroscopy, and atomic force microscopy provide information about the C6 monolayer, Pd metal, and film morphology, respectively, as a function of O3 and heat treatment to aid in understanding the observed sensing behavior. This work demonstrates a simple chemical approach toward fabricating a fast, reversible sensor capable of detecting low concentrations of H2.     

Chiral bisphosphinite metalloligands derived from a P-chiral secondary phosphine oxide

Interaction of PdCl(2)(MeCN)(2) with 2 equiv of (S(P))-(t)BuPhP(O)H (1H) followed by treatment with Et(3)N gave [Pd((1)(2)H)](2)(micro-Cl)(2) (2). Reaction of 2 with Na[S(2)CNEt(2)] or K[N(PPh(2)S)(2)] afforded Pd[(1)(2)H](S(2)CNEt(2)) (3) or Pd[(1)(2)H)[N(PPh(2)S)(2)] (4), respectively. Treatment of 3 with V(O)(acac)(2) (acac = acetylacetonate) and CuSO(4) in the presence of Et(3)N afforded bimetallic complexes V(O)[Pd(1)(2)(S(2)CNEt(2))](2) (5) or Cu[Pd(1)(2)(S(2)CNEt(2))](2) (6), respectively. X-ray crystallography established the S(P) configuration for the phosphinous acid ligands in 3 and 6, indicating that 1H binds to Pd(II) with retention of configuration at phosphorus. The geometry around Cu in 6 is approximately square planar with the average Cu-O distance of 1.915(3) A. Treatment of 2 with HBF(4) gave the BF(2)-capped compound [Pd((1)(2)BF(2))](2)(micro-Cl)(2) (7). The solid-state structure of 7 containing a PdP(2)O(2)B metallacycle has been determined. Chloride abstraction of 7 with AgBF(4) in acetone/water afforded the aqua compound [Pd((1)(2)BF(2))(H(2)O)(2)][BF(4)] (8) that reacted with [NH(4)](2)[WS(4)] to give [Pd((1)(2)BF(2))(2)](2)[micro-WS(4)] (9). The average Pd-S and W-S distances in 9 are 2.385(3) and 2.189(3) A, respectively. Treatment of [(eta(6)-p-cymene)RuCl(2)](2) with 1H afforded the phosphinous acid adduct (eta(6)-p-cymene)RuCl(2)(1H) (10). Reduction of [CpRuCl(2)](x)() (Cp = eta(5)-C(5)Me(5)) with Zn followed by treatment with 1H resulted in the formation of the Zn(II) phosphinate complex [(CpRu(eta(6)-C(6)H(5)))(t)BuPO(2))](2)(ZnCl(2))(2) (11) that contains a Zn(2)O(4)P(2) eight-membered ring.     

Multimetallic assemblies using piperazine-based dithiocarbamate building blocks

Treatment of cis-[RuCl2(dppm)2] (dppm = bis(diphenylphosphino)methane) with dithiocarbamates, NaS2CNR2 (R = Me, Et) and [H2NC5H10][S2CNC5H10], yields cations [Ru(S2CNR2)2(dppm)2](+) and [Ru(S2CNC5H10)2(dppm)2](+), respectively. The zwitterions S2CNC4H8NHR (R = Me, Et) react with the same metal complex in the presence of base to yield [Ru(S2CNC4H8NR)(dppm)2](+). Piperazine or 2,6-dimethylpiperazine reacts with carbon disulfide to give the zwitterionic dithiocarbamate salts H2NC4H6(R2-3,5)NCS2 (R = H; R = Me), which form the complexes [Ru(S2CNC4H6(R2-3,5)NH2)(dppm)2](2+) on reaction with cis-[RuCl2(dppm)2]. Sequential treatment of [Ru(S2CNC4H8NH2)(dppm)2](2+) with triethylamine and carbon disulfide forms the versatile metalla-dithiocarbamate complex [Ru(S2CNC4H8NCS2)(dppm)2] which reacts readily with cis-[RuCl2(dppm)2] to yield [{Ru(dppm)2}2(S2CNC4H8NCS2)]. Reaction of [Ru(S2CNC4H8NCS2)(dppm)2] with [Os(CH=CHC6H4Me-4)Cl(CO)(BTD)(PPh3)2] (BTD = 2,1,3-benzothiadiazole), [Pd(C6H4CH2NMe2)Cl]2, [PtCl2(PEt3)2], and [NiCl2(dppp)] (dppp = 1,3-bis(diphenylphosphino)propane) results in the heterobimetallic complexes [(dppm)2Ru(S2CNC4H8NCS2)ML(n))](m+) (ML(n) = Os(CH=CHC6H4Me-4)(CO)(PPh3)2](+), m = 1; ML(n) = Pd(C,N-C6H4CH2NMe2), m = 1; ML(n) = Pt(PEt3)2, m = 2; ML(n) = Ni(dppp), m = 2). Reaction of [NiCl2(dppp)] with H2NC4H8NCS2 yields the structurally characterized compound, [Ni(S2CNC4H8NH2)(dppp)](2+), which reacts with base, CS2, and cis-[RuCl2(dppm)2] to provide an alternative route to [(dppm)2Ru(S2CNC4H8NCS2)Ni(dppp)](+). A further metalla-dithiocarbamate based on cobalt, [CpCo(S2CNC4H8NH2)(PPh3)](2+), is formed by treatment of CpCoI2(CO) with S2CNC4H8NH2 followed by PPh3. Further reaction with NEt3, CS2, and cis-[RuCl2(dppm)2] yields [(Ph3P)CpCo(S2CNC4H8NCS2)Ru(dppm)2](2+). Heterotrimetallic species of the form [{(dppm)2Ru(S2CNC4H8NCS2)}2M](2+) result from the reaction of [Ru(S2CNC4H8NCS2)(dppm)2] and M(OAc)2 (where M = Ni, Cu, Zn). Reaction of [Ru(S2CNC4H8NCS2)(dppm)2] with Co(acac)3 and LaCl3 results in the formation of the compounds [{(dppm)2Ru(S2CNC4H8NCS2)}3Co](3+) and [{(dppm)2Ru(S2CNC4H8NCS2)}3La](3+), respectively. The electrochemical behavior of selected examples is also reported.     

Synthesis, structural characterization, antimicrobial and cytotoxic effects of aziridine, 2-aminoethylaziridine and azirine complexes of copper(II) and palladium(II)

The synthesis, spectroscopic and X-ray structural characterization of copper(II) and palladium(II) complexes with aziridine ligands as 2-dimethylaziridine HNCH(2)CMe(2) (a), the bidentate N-(2-aminoethyl)aziridines C(2)H(4)NC(2)H(4)NH(2) (b) or CH(2)CMe(2)NCH(2)CMe(2)NH(2) (c) as well as the unsaturated azirine NCH(2)CPh (d) are reported. Cleavage of the cyclometallated Pd(II) dimer [μ-Cl(C(6)H(4)CHMeNMe(2)-C,N)Pd](2) with ligand a yielded compound [Cl(NHCH(2)CMe(2))(C(6)H(4)CHMe(2)NMe(2)-C,N)Pd] (1a). The reaction of the aziridine complex trans-[Cl(2)Pd(HNC(2)H(4))(2)] with an excess of aziridine in the presence of AgOTf gave the ionic chelate complex trans-[(C(2)H(4)NC(2)H(4)NH(2)-N,N')(2)Pd](OTf)(2) (2b) which contains the new ligand b formed by an unexpected insertion and ring opening reaction of two aziridines ("aziridine dimerization"). CuCl(2) reacted in pure HNC(2)H(4) or HNCH(2)CMe(2) (b) again by "dimerization" to give the tris-chelated ionic complex [Cu(C(2)H(4)NC(2)H(4)NH(2)-N,N')(3)]Cl(2) (3b) or the bis-chelated complex [CuCl(C(2)H(2)Me(2)NC(2)H(2)Me(2)NH(2)-N,N')(2)]Cl (4c). By addition of 2H-3-phenylazirine (d) to PdCl(2), trans-[Cl(2)Pd(NCH(2)CPh)(2)] (5d) was formed. All new compounds were characterized by NMR, IR and mass spectra and also by X-ray structure analyses (except 3b). Additionally the cytotoxic effects of these complexes were examined on HL-60 and NALM-6 human leukemia cells and melanoma WM-115 cells. The antimicrobial activity was also determined. The growth of Gram-positive bacterial strains (S. aureus, S. epidermidis, E. faecalis) was inhibited by almost all tested complexes at the concentrations of 37.5-300.0 μg mL(-1). However, MIC values of complexes obtained for Gram-negative E. coli and P. aeruginosa, as well as for C. albicans yeast, mostly exceeded 300 μg mL(-1). The highest antibacterial activity was achieved by complexes 1a and 2b. Complex 2b also inhibited the growth of Gram-negative bacteria.     

Epitaxial thin films of ATiO(3-x)H(x) (A = Ba, Sr, Ca) with metallic conductivity

Epitaxial thin films of titanium perovskite oxyhydride ATiO(3-x)H(x) (A = Ba, Sr, Ca) were prepared by CaH(2) reduction of epitaxial ATiO(3) thin films deposited on a (LaAlO(3))(0.3)(SrAl(0.5)Ta(0.5)O(3))(0.7) substrate. Secondary ion mass spectroscopy detected a substantial amount and uniform distribution of hydride within the film. SrTiO(3)/LSAT thin film hydridized at 530 °C for 1 day had hydride concentration of 4.0 × 10(21) atoms/cm(3) (i.e., SrTiO(2.75)H(0.25)). The electric resistivity of all the ATiO(3-x)H(x) films exhibited metallic (positive) temperature dependence, as opposed to negative as in BaTiO(3-x)H(x) powder, revealing that ATiO(3-x)H(x) are intrinsically metallic, with high conductivity of 10(2)-10(4) S/cm. Treatment with D(2) gas results in hydride/deuteride exchange of the films; these films should be valuable in further studies on hydride diffusion kinetics. Combined with the materials' inherent high electronic conductivity, new mixed electron/hydride ion conductors may also be possible.     

Synthesis, structure, and reactivity of palladacycles that contain a chiral rhenium fragment in the backbone: New cyclometalation and catalyst design strategies

The bromocyclopentadienyl complex [(eta5-C5H4Br)Re(CO)3] is converted to racemic [(eta5-C5H4Br)Re(NO)(PPh3)(CH2PPh2)] (1 b) similarly to a published sequence for cyclopentadienyl analogues. Treatment of enantiopure (S)-[(eta5-C5H5)Re(NO)(PPh3)(CH3)] with nBuLi and I2 gives (S)-[(eta5-C5H4I)Re(NO)(PPh3)(CH3)] ((S)-6 c; 84 %), which is converted (Ph3C+ PF6 -, PPh2H, tBuOK) to (S)-[(eta5-C5H4I)Re(NO)(PPh3)(CH2PPh2)] ((S)-1 c). Reactions of 1 b and (S)-1 c with Pd[P(tBu)3]2 yield [{(eta5-C5H4)Re(NO)(PPh3)(mu-CH2PPh2)Pd(mu-X)}2] (10; X = b, Br, rac/meso, 88 %; c, I, S,S, 22 %). Addition of PPh3 to 10 b gives [(eta5-C5H4)Re(NO)(PPh3)(mu-CH2PPh2)Pd(PPh3)(Br)] (11 b; 92 %). Reaction of (S)-[(eta5-C5H5)Re(NO)(PPh3)(CH2PPh2)] ((S)-2) and Pd(OAc)(2) (1.5 equiv; toluene, RT) affords the novel Pd3(OAc)4-based palladacycle (S,S)-[(eta5-C5H4)Re(NO)(PPh3)(mu-CH2PPh2)Pd(mu-OAc)2Pd(mu-OAc)2Pd(mu-PPh2CH2)(Ph3P)(ON)Re(eta5-C5H4)] ((S,S)-13; 71-90 %). Addition of LiCl and LiBr yields (S,S)-10 a,b (73 %), and Na(acac-F6) gives (S)-[(eta5-C5H4)Re(NO)(PPh3)(mu-CH2PPh2)Pd(acac-F6)] ((S)-16, 72 %). Reaction of (S,S)-10 b and pyridine affords (S)-[(eta5-C5H4)Re(NO)(PPh3)(mu-CH2PPh2)Pd(NC5H5)(Br)] ((S)-17 b, 72 %); other Lewis bases yield similar adducts. Reaction of (S)-2 and Pd(OAc)2 (0.5 equiv; benzene, 80 degrees C) gives the spiropalladacycle trans-(S,S)-[{(eta5-C5H4)Re(NO)(PPh3)(mu-CH2PPh2)}2Pd] (39 %). The crystal structures of (S)-6 c, 11 b, (S,S)- and (R,R)-132 C7H8, (S,S)-10 b, and (S)-17 b aid the preceding assignments. Both 10 b (racemic or S,S) and (S)-16 are excellent catalyst precursors for Suzuki and Heck couplings.     

Chiral osmium complexes with sterically bulky Schiff-base ligands. Crystal structures of Os(IV) derivatives and the reactivity and catalytic cyclopropanation of alkenes with EDA

The syntheses and reactivities of sterically encumbered trans-dioxoosmium(VI) complexes containing Schiff-base ligands bis(3,5-di-tert-butylsalicylidene)-1,2-cyclohexane-diamine (H2tBu-salch) and bis(3,5-dibromosalicylidene)-1,2-cyclohexane-diamine (H2Br-salch) are described. Reactions of [Os(VI)tBu-salch)O2] (1a) and [Os(VI)(Br-salch)O2] (1b) with PPh(3), p-X-arylamines (X = NO2, CN), N2H4 x H2O, Ph2NNH2, SOCl2, CF3CO2H, Br2, and I2 under reducing conditions gave [Os(II)(Br-salch)(OPPh3)2] (2), [Os(IV)(Br-salch)(p-X-C6H4NH)2] (3), [mu-O-{Os(IV)(tBu-salch)(p-NO2C6H4NH)}2] (4), [Os(II)(Br-salch)(N2)(H2O)] (5), [Os(IV)(tBu-salch)(OH)(Cl)] (6), [Os(IV)(tBu-salch)(OH)2] (7), [Os(IV)(tBu-salch)Cl2] (8), [Os(IV)(tBu-salch)(CF3CO2)2] (9), [Os(IV)(tBu-salch)Br2] (10), and [Os(IV)(tBu-salch)I2] (11), respectively. X-ray crystal structure determinations of [Os(IV)(Br-salch)(p-NO2C6H4NH)2] (3a), [Os(IV)(Br-salch)(p-CNC6H4NH)2] (3b), 6, 8, 9, and 11 reveal the Os-N(amido) distances to be 1.965(4)-1.995(1) A for the bis(amido) complexes, Os-Cl distances of 2.333(8)-2.3495(1) A for 6 and 8, Os-O(CF3CO2) distances of 2.025(6)-2.041(6) A for 9, and Os-I distances of 2.6884(6)-2.6970(6) A for 11. Upon UV irradiation, (1S,2S)-(1a) reacted with aryl-substituted alkenes to give the corresponding epoxides in moderate yields, albeit with no enantioselectivity. The (1R,2R)-6 catalyzed cyclopropanation of a series of substituted styrenes exhibited moderate to good enantioselectivity (up to 79% ee) and moderate trans selectivity.     

Electropolymerization of Pd(II) complexes containing phosphinoterthiophene ligands

A series of Pd complexes of 3'-diphenylphosphino-2,2':5'2' '-terthiophene (1a, dppterth) in which the metal is coordinated in three different modes have been prepared and electropolymerized, resulting in the formation of conductive thin films. In [Pd2(mu-Cl2)(dppterth-P,C3)2] (3a) the metal is P,C-coordinated, in [PdCl2(dppterth-P)2] (4a) the coordination is monodentate via the phosphine, and in [Pd(dppterth-P,C3)(dppterth-P,S1)][PF6] (5a) both P,C- and P,S-coordination modes are found. In 5a, the coordinated thiophene is hemilabile and may be displaced by reaction with more strongly coordinating ligands such as isocyanides. To probe the effect of blocking the alpha-position of the terthienyl moiety with methyl groups, 3'-diphenylphosphino-5-methyl-2,2':5'2' '-terthiophene (1b, Me-dppterth) and 3'-diphenylphosphino-5,5' '-dimethyl-2,2':5'2' '-terthiophene (1c, Me2-dppterth) were prepared, and the corresponding series of Pd complexes was synthesized. One of these complexes, [Pd(Me2-dppterth-P,C3)(Me2-dppterth-P,S1)][PF6] (5c), has been crystallographically characterized. The electropolymerized films prepared from 5a react with isonitriles, and shifts in the absorption spectra of the electropolymerized materials are observed upon reaction. A Pd complex has also been prepared from 5-diphenylphosphino-2,2':5'2' '-terthiophene (2, 5dppterth), and this complex has been electropolymerized. All the electropolymerized thin films have been characterized using EDX analysis, which demonstrates good correspondence with the elemental analysis of the respective monomers, and the maximum conductivities of the films are near 10(-4) S x cm(-1). Comparing the electropolymerization behavior of the complexes, along with their electrochemical and spectroscopic data, allows conclusions to be drawn regarding the involvement of pi-delocalization and the metal group in the conductivity of the materials.     

Syntheses, characterizations and properties of [Mo2O2S2]-based oxothiomolybdenum wheels incorporating bisphosphonate ligands

We report the syntheses and characterizations of the first polyoxothiometalate complexes isolated from the reaction of the oxothiocationic [Mo(V)(2)O(2)S(2)](2+) precursor and bisphosphonate ligands H(2)O(3)PCR(OH)PO(3)H(2) (R = C(4)H(5)N(2), zoledronic acid; R = C(3)H(6)NH(2), alendronic acid). [(Mo(2)O(2)S(2)(H(2)O))(4)(O(3)PC(O)(C(4)H(6)N(2))PO(3))(4)](8-) (Mo(8)S(8)(Zol)(4)) and [(Mo(2)O(2)S(2)(H(2)O))(4)(O(3)PC(O)(C(3)H(6)NH(3))PO(3))(4)](8-) (Mo(8)S(8)(Ale)(4)) contain four Mo(V) dimers connected via bisphosphonate ligands. These compounds offer a unique opportunity to compare the structures and properties of cyclic compounds obtained with [Mo(2)O(2)S(2)](2+) and with [Mo(2)O(4)](2+). The oxothio compounds appear less stable in solution than the oxo analogue, confirming the higher lability and versatility of [Mo(2)O(2)S(2)]-based compounds compared to [Mo(2)O(4)]-based POMs. Multinuclear and multidimensional solid-state NMR studies were carried out to complement X-ray diffraction analysis. Information on short-range interactions, dynamic behaviors, and local disorder within the crystalline materials are therefore reported. Furthermore, the electrocatalytic properties of Mo(8)S(8)(Ale)(4) and of the analogous [(Mo(2)O(4)(H(2)O))(4)(O(3)PC(O)(C(3)H(6)NH(3))PO(3))(4)](8-) (Mo(8)O(8)(Ale)(4)) immobilized onto the surface of a glassy carbon electrode were studied, thus evidencing the ability of [Mo(2)O(2)S(2)]-based cycles to promote the reduction of protons into hydrogen, whereas the oxo analogue appeared inactive.     

Acrylonitrile insertion reactions of cationic palladium alkyl complexes

The reactions of acrylonitrile (AN) with "L(2)PdMe+" species were investigated; (L(2) = CH(2)(N-Me-imidazol-2-yl)(2) (a, bim), (p-tolyl)(3)CCH(N-Me-imidazol-2-yl)(2) (b, Tbim), CH(2)(5-Me-2-pyridyl)(2) (c, CH(2)py'(2)), 4,4'-Me(2)-2,2'-bipyridine (d), 4,4'-(t)Bu(2)-2,2'-bipyridine (e), (2,6-(i)Pr(2)-C(6)H(3))N=CMeCMe=N(2,6-(i)Pr(2)-C(6)H(3)) (f)). [L(2)PdMe(NMe(2)Ph)][B(C(6)F(5))(4)] (2a-c) and [{L(2)PdMe}(2)(mu-Cl)][B(C(6)F(5))(4)] (2d-f) react with AN to form N-bound adducts L(2)Pd(Me)(NCCH=CH(2))(+) (3a-f). 3a-e undergo 2,1 insertion to yield L(2)Pd{CH(CN)Et}+, which form aggregates [L(2)Pd{CH(CN)Et}](n)(n)(+) (n = 1-3, 4a-e) in which the Pd units are proposed to be linked by PdCHEtCN- - -Pd bridges. 3f does not insert AN at 23 degrees C. 4a-e were characterized by NMR, ESI-MS, IR and derivatization to L(2)Pd{CH(CN)Et}(PR(3))+ (R = Ph (5a-e), Me (6a-c)). 4a,b react with CO to form L(2)Pd{CH(CN)Et}(CO)+ (7a,b). 7a reacts with CO by slow reversible insertion to yield (bim)Pd{C(=O)CH(CN)Et}(CO)+ (8a). 4a-e do not react with ethylene. (Tbim)PdMe+ coordinates AN more weakly than ethylene, and AN insertion of 3b is slower than ethylene insertion of (Tbim)Pd(Me)(CH(2)=CH(2))(+) (10b). These results show that most important obstacles to insertion polymerization or copolymerization of AN using L(2)PdR+ catalysts are the tendency of L(2)Pd{CH(CN)CH(2)R}+ species to aggregate, which competes with monomer coordination, and the low insertion reactivity of L(2)Pd{CH(CN)CH(2)R}(substrate)+ species.     

Formation of P-C bonds under unexpectedly mild conditions. Phosphoryl migration and metal coordination of diphenylphosphinomethyl-oxazolines and -thiazolines

The heterocycles 2-methyl-2-oxazoline (mox) and 2-methyl-2-thiazoline (mth) react with Ph2PCl under mild conditions, in the presence of NEt3 which promotes their phosphorylation by stabilization of their enamino tautomers mox(e) and mth(e), respectively, and which also behaves as HCl scavenger. Depending on the reaction conditions, three different phosphine ligands were obtained in good yields from mox: the monophosphine Ph2PCH2C=NCH2CH2O (1ox) and the isomeric diphosphines Ph2PCH=COCH2CH2NPPh2 (2ox) (X-ray structure) and (Ph2P)2CHC=NCH2CH2O (3ox). The formation of these ligands involves phosphoryl migration reactions, which were studied by NMR spectroscopy. The synthesis and the X-ray structures of the corresponding diphenylphosphinothiazolines Ph2PCH2C=NCH2CH2S (1th) and Ph2CH=CSCH2CH2NPPh2 (2th) are also reported but the thiazoline analog of the geminal diphosphine 3ox was not observed. The metal complexes [Pt(3ox-H)2] x 4 CH2Cl2 (4 x 4 CH2Cl2), [Pt(Me)I(1ox)] (5), [Pt(Me)2(1ox)] (7), [Pd(dmba-C,N)(1th)]OTf x 0.25 Et2O (8 x 0.25 Et2O), [Pd(dmba-C,N)(1th-H)] (9), and [9 x {Pd(dmba-C,N)Cl}] x 2.5 C6H6 (10 x 2.5 C6H6) have been prepared and structurally characterized by X-ray diffraction.     

Rational design of the first closed coordination capsule with octahedral outer shape

The rational synthesis of an octahedral coordination capsule in which the triangular faces are covered by single ligands is described herein. Starting with tris(2-hydroxybenzylidene)triaminoguanidinium chloride [H(6)L]Cl, we observed an oxidative cyclization of this ligand in the presence of PPh(4) (+) ions resulting in the complex [Pd(H(2)L')(PPh(3))] (1). The use of 5,5-diethylbarbiturate (bar(2-)) as a bridging ligand in the presence of [Co(en)(3)](3+) (en=ethylenediamine) leads to the formation of a rectangular box with the formula (Et(4)N)(6)[[Co[(PdCl)(Pd)L](2)(mu-bar)](2)] (2). The analysis of the architecture of compounds 1 and 2 enables the development of a self-assembly strategy for the synthesis of an octahedral coordination cage 3 with the formula Na(4)(Et(3)NH)(12)[(Pd(3)L)(8)[mu-(bar)](12)].x H(2)O. Compound 3 was characterized by (13)C-MAS-NMR spectroscopy and single-crystal structure analysis.     

Effects of polymerization media on the nanoscale conductivity and current-voltage characteristics of chemically synthesized polyaniline films

A current sensing atomic force microscope (CS-AFM) was used to probe the conducting homogeneity and band structures of fully doped polyaniline (PANI) films prepared from in situ chemical polymerization/deposition of aniline on indium tin oxide in various inorganic acids. The charge transport properties of PANI films depend on the film thickness as well as polymerization medium. Fluctuations in conductivity are observed on all acid-doped PANI films and the conducting homogeneity was dependent on the film thickness: the conductivity of thick film is more uniform. The current-voltage (I-V) characteristics of all thick (>200 nm) films displayed a metal-like behavior and conductivity as high as 40 S/cm was detected in high conducting regions of film thicker than 400 nm. Whereas thin (<120 nm) films revealed insulating, semiconducting, and semimetal conducting, wide distribution in conductivity and interband distances (estimated from the I-V ordI/dV-V curves) was found. The interband distances is 0-1.35, 0-1.0, and 0-0.78 eV for thin PANI film prepared from HCl(aq), HClO(4)(aq), and H2SO4(aq), respectively. PANI film (260 nm) prepared from H2SO4(aq) revealed fiberlike morphology, and compared to PANI films prepared from HCl(aq) and HClO4(aq) with similar thickness, it has higher average nanoscale conductivity but lower bulk conductivity. This result could be direct evidence which supports that the bulk conductivity of PANI depended on the carriers hopping between the conducting domains.     

1,1-ethylenedithiolato complexes of palladium(II) and platinum(II) with isocyanide and carbene ligands

The reactions of [Tl(2)[S(2)C=C[C(O)Me](2)]](n) with [MCl(2)(NCPh)(2)] and CNR (1:1:2) give complexes [M[eta(2)-S(2)C=C[C(O)Me](2)](CNR)(2)] [R = (t)Bu, M = Pd (1a), Pt (1b); R = C(6)H(3)Me(2)-2,6 (Xy), M = Pd (2a), Pt (2b)]. Compound 1b reacts with AgClO(4) (1:1) to give [[Pt(CN(t)Bu)(2)](2)Ag(2)[mu(2),eta(2)-(S,S')-[S(2)C=C[C(O)Me](2)](2)]](ClO(4))(2) (3). The reactions of 1 or 2 with diethylamine give mixed isocyanide carbene complexes [M[eta(2)-S(2)C=C[C(O)Me](2)](CNR)[C(NEt(2))(NHR)]] [R = (t)Bu, M = Pd (4a), Pt (4b); R = Xy, M = Pd (5a), Pt (5b)] regardless of the molar ratio of the reagents. The same complexes react with an excess of ammonia to give [M[eta(2)-(S,S')-S(2)C=C[C(O)Me](2)](CN(t)Bu)[C(NH(2))(NH(t)Bu)]] [M = Pd (6a), Pt (6b)] or [M[eta(2)-(S,S')-S(2)C=C[C(O)Me](2)][C(NH(2))(NHXy)](2)] [M = Pd (7a), Pt (7b)] probably depending on steric factors. The crystal structures of 2b, 4a, and 4b have been determined. Compounds 4a and 4b are isostructural. They all display distorted square planar metal environments and chelating planar E,Z-2,2-diacetyl-1,1-ethylenedithiolato ligands that coordinate through the sulfur atoms.     

Synthetic and computational studies of the palladium(iv) system Pd(alkyl)(aryl)(alkynyl)(bidentate)(triflate) exhibiting selectivity in C-C reductive elimination

Synthetic routes to methyl(aryl)alkynylpalladium(iv) motifs are presented, together with studies of selectivity in carbon-carbon coupling by reductive elimination from Pd(IV) centres. The iodonium reagents IPh(C[triple bond, length as m-dash]CR)(OTf) (R = SiMe(3), Bu(t), OTf = O(3)SCF(3)) oxidise Pd(II)Me(p-Tol)(L(2)) (1-3) [L(2) = 1,2-bis(dimethylphosphino)ethane (dmpe) (1), 2,2'-bipyridine (bpy) (2), 1,10-phenanthroline (phen) (3)] in acetone-d(6) or toluene-d(9) at -80 °C to form complexes Pd(IV)(OTf)Me(p-Tol)(C[triple bond, length as m-dash]CR)(L(2)) [R = SiMe(3), L(2) = dmpe (4), bpy (5), phen (6); R = Bu(t), L(2) = dmpe (7), bpy (8), phen (9)] which reductively eliminate predominantly (>90%) p-Tol-C[triple bond, length as m-dash]CR above ～-50 °C. NMR spectra show that isomeric mixtures are present for the Pd(IV) complexes: three for dmpe complexes (4, 7), and two for bpy and phen complexes (5, 6, 8, 9), with reversible reduction in the number of isomers to two occurring between -80 °C and -60 °C observed for the dmpe complex 4 in toluene-d(8). Kinetic data for reductive elimination from Pd(IV)(OTf)Me(p-Tol)(C[triple bond, length as m-dash]CSiMe(3))(dmpe) (4) yield similar activation parameters in acetone-d(6) (66 ± 2 kJ mol(-1), ΔH(?) 64 ± 2 kJ mol(-1), ΔS(?)-67 ± 2 J K(-1) mol(-1)) and toluene-d(8) (E(a) 68 ± 3 kJ mol(-1), ΔH(?) 66 ± 3 kJ mol(-1), ΔS(?)-74 ± 3 J K(-1) mol(-1)). The reaction rate in acetone-d(6) is unaffected by addition of sodium triflate, indicative of reductive elimination without prior dissociation of triflate. DFT computational studies at the B97-D level show that the energy difference between the three isomers of 4 is small (12.6 kJ mol(-1)), and is similar to the energy difference encompassing the six potential transition state structures from these isomers leading to three feasible C-C coupling products (13.0 kJ mol(-1)). The calculations are supportive of reductive elimination occurring directly from two of the three NMR observed isomers of 4, involving lower activation energies to form p-TolC[triple bond, length as m-dash]CSiMe(3) and earlier transition states than for other products, and involving coupling of carbon atoms with higher s character of σ-bonds (sp(2) for p-Tol, sp for C[triple bond, length as m-dash]C-SiMe(3)) to form the product with the strongest C-C bond energy of the potential coupling products. Reductive elimination occurs predominantly from the isomer with Me(3)SiC[triple bond, length as m-dash]C trans to OTf. Crystal structure analyses are presented for Pd(II)Me(p-Tol)(dmpe) (1), Pd(II)Me(p-Tol)(bpy) (2), and the acetonyl complex Pd(II)Me(CH(2)COMe)(bpy) (11).     

Effect of alkyl substitueras in hydrophobic 8-quinolinol on the extraction of gallium(III) and applications to the separation of gallium(III) from aluminum(III)

The extraction of gallium(III) with newly prepared 5-alkyloxymethyl-8-quinolinol derivatives with alkyl substituent at the 2-position in 8-quinolinol moiety has been studied. The Ga(III)-5-octyloxymethyl-8-quinolinol (HO(8)Q), Ga(III)-2-methyl-5-octyloxymethyl-8-quinolinol (HMO(8)Q), Ga(III)-2-methyl-5-hexyloxymethyl-8-quinolinol (HM-O(6)Q), and Ga(HI)-2-n-butyl-5-hexyloxymethyl-8-quinolinol (HNBO(6)Q) complexes extracted in heptane from a perchloric acid medium were Ga(O(8)Q)(3), Ga(OH)(H(2)O)(MO(8)Q)(2), Ga(OH)(H(2)O)(MO(6)Q)(2) and Ga(OH)H(2)O)(NBO(6)Q)(2), respectively. The 2-tert-butyl-5-hexyloxymethyl-8-quinolinol did not exhibit any reactivity toward gallium(III). The extraction constants for Ga(O(8)Q)(3) (K(ex) = [Ga(O(8)Q)(3)](org) [H(+)](3)/[Ga(3+)][HO(8)Q](org)(3)), Ga(OH)(H(2)O)(MO(8)Q)(2) (K(ex) = [Ga(OH) (H(2)O)(MO(8)Q)(2)](org) [H(+)](3)/[Ga(3+)][HMO(8)Q](org)(2)), Ga(OH)(H(2)O)(2)(MO(6)Q)(2) and Ga(OH)(H(2)O)(NBO(6)Q)(2), which were extracted in heptane from an acidic solution, are 10(3.21 +/- 0.12), 10(-4.24 +/- 0.16), 10(-3.84 +/- 0.16) and 10(-4.07 +/- 0.07), respectively at I = 0.1 M and 25 degrees C. HNBO(6)Q exhibited very high selectivity toward gallium(III) in the presence of aluminum(III). Even in the presence of a 100 fold excess of aluminum(III) to gallium(III) (1.43 x 10(-5) M), gallium(III) was completely extracted and the distribution ratio of aluminum(III) was found to be less than 2.0 x 10(-3).     

Polyoxomolybdenum(V/VI)-sulfite compounds: synthesis, structural, and physical studies

Reaction of Na(2)Mo(VI)O(4) x 2H(2)O with (NH(4))(2)SO(3) in the mixed-solvent system H(2)O/CH(3)CN (pH = 5) resulted in the formation of the tetranuclear cluster (NH(4))(4)[Mo(4)(VI)SO(16)] x H(2)O (1), while the same reaction in acidic aqueous solution (pH = 5) yielded (NH(4))(4)[Mo(5)(VI)S(2)O(21)] x 3H(2)O (2). Compound {(H(2)bipy)(2)[Mo(5)(VI)S(2)O(21)] x H(2)O}(x) (3) was obtained from the reaction of aqueous acidic solution of Na(2)Mo(VI)O(4) x 2H(2)O with (NH(4))(2)SO(3) (pH = 2.5) and 4,4'-bipyridine (4,4'-bipy). The mixed metal/sulfite species (NH(4))(7)[Co(III)(Mo(2)(V)O(4))(NH(3))(SO(3))(6)] x 4H(2)O (4) was synthesized by reacting Na(2)Mo(VI)O(4) x 2H(2)O with CoCl(2) x 6H(2)O and (NH(4))(2)SO(3) with precise control of pH (5.3) through a redox reaction. The X-ray crystal structures of compounds 1, 2, and 4 were determined. The structure of compound 1 consists of a ring of four alternately face- and edge-sharing Mo(VI)O(6) octahedra capped by the trigonal pyramidal sulfite anion, while at the base of the Mo(4) ring is an oxo group which is asymmetrically shared by all four molybdenum atoms. Compound 3 is based on the Strandberg-type heteropolyion [Mo(5)(VI)S(2)O(21)](4-), and these coordinatively saturated clusters are joined by diprotonated 4,4'-H(2)bipy(2+) through strong hydrogen bonds. Compound 3 crystallizes in the chiral space group C2. The structure of compound 4 consists of a novel trinuclear [Co(III)Mo(2)(V)SO(3)(2-)] cluster. The chiral compound 3 exhibits nonlinear optical (NLO) and photoluminescence properties. The assignment of the sulfite bands in the IR spectrum of 4 has been carried out by density functional calculations. The cobalt in 4 is a d(6) octahedral low-spin metal atom as it was evidenced by magnetic susceptibility measurements, cw EPR, BVS, and DFT calculations. The IR and solid-state UV-vis spectra as well as the thermogravimetric analyses of compounds 1-4 are also reported.     

Effects of the intramolecular NH...S hydrogen bond in mononuclear platinum(II) and palladium(II) complexes with 2,2'-bipyridine and benzenethiol derivatives

A series of complexes, [M(bpy)(SAr)2] (M = platinum(II) or palladium(II), bpy = 2,2'-bipyridine, SAr = 2- or 4-(acylamino)benzenethiolate, or 2-(alkylcarbamoyl)benzenethiolate), were synthesized and characterized on the basis of 1H NMR, IR, and electrochemical properties. The structures of [Pt(bpy)(S-2-Ph3CCONHC6H4)2] (1) and [Pt(bpy)(S-2-t-BuNHCOC6H4)2] (3) were determined by X-ray analysis. The complexes have intramolecular NH...S hydrogen bonds between the amide NH group and the sulfur atom. A weak NH...S hydrogen bond in these complexes and [Pd(bpy)(S-2-Ph3CCONHC6H4)2] (4) is detected from the 1H NMR spectra and the IR spectra in chloroform and in the solid state. [Pt(bpy)(S-2-Ph3CCONHC6H4)2] (1) exhibits a remarkably high-energy-shifted lowest-energy band in UV-visible spectra and has a positively shifted oxidation potential. The blue-shift of 42 nm and the positive shift of +0.24 V, as compared to those of [Pt(bpy)(SC6H5)2), are due to the effect of the NH...S hydrogen bond.     

Synthesis, catalytic activity, and photophysical properties of 5,6-membered Pd and Pt SCS'-pincer complexes based on thiophosphorylated 3-amino(hydroxy)benzoic acid thioanilides

Novel unsymmetrical SCS'-pincer ligands, 1-[PhNHC(S)]-3-[Ph(2)P(S)NH]-C(6)H(4) (3) and 1-[PhNHC(S)]-3-[Ph(2)P(S)O]C(6)H(4) (7), bearing a thiocarbamoyl moiety in combination with thiophosphorylamino- and thiophosphoryloxy-donating groups, respectively, were obtained via thiophosphorylation of 3-amino- and 3-hydroxy-benzoic acid (thio)anilides 1 and 6. Direct cyclometallation of the central benzene ring in the ligands 3 and 7 in reaction with (PhCN)(2)MCl(2) (M = Pd, Pt) as a metal precursor afforded κ(3)-SCS'-hybrid pincer complexes 8, 9 with 5- and 6-membered fused metallacycles in good to high yields (67-95%). The complexes 8 and 9 were characterized by multinuclear NMR ((31)P, (1)H, (13)C) and IR spectroscopy as well as single-crystal X-ray crystallography. Palladium complexes 8a and 9a were shown to be active catalysts for the Suzuki-Miyaura cross-coupling reaction. In the solid state the ligands 3 and 7 as well as their Pt(II) and Pd(II) complexes 8 and 9 are luminescent at 300 K. The emission of the complexes has the different origin depending on the metal nature.