Bingham流体在旋转圆盘上流动的数值解

导出了描述Ｂｉｎｇｈａｍ流体在旋转圆盘上流动的基本方程，用差分方法数值解薄膜厚度分布方程，得到二种类型的厚度分布。数值解分别和计算机磁盘的厚度分布，Ｊｅｎｅｋｈｅ等的实验结果定性一致。     

低Pr数流体自然对流边界层流动的直接数值模拟

在太阳能采暖通风系统中,空气在太阳辐射作用下于吸热壁上所形成的非稳态自然对流边界 层流动是决定系统热性能的关键所在. 对于线性分层的低普郎特数($Pr<1$)流体而言,标度分 析表明在起始阶段边界层的发展是与高度无关而只依赖于时间的,而处于稳态时,各项标度 关系与处于起始阶段终结时刻的大不相同,且都与高度和时间无关,而只与$Pr$数和线性分 层度相关. 直接数值模拟计算结果表明由标度分析所得的各项标度关系揭示了流动的特性参 数与控制参数之间的决定性内在联系. 但同时也表明标度关系并没有充分体现出 对$Pr$数的所有依赖关系,这一不足可利用直接数值模拟计算结果得到弥补.     

水基MWCNTs/MoS2复合纳米流体的摩擦学性能研究

使用离子液体[EMIm]BF₄分散多壁碳纳米管(MWCNTs),再以[EMIm]BF₄-阿拉伯树胶(GA)为添加剂分散二硫化钼(MoS₂),二者的水溶液复配得到复合纳米流体. 采用拉曼光谱分析了MWCNTs的改性度,通过吸光度和粒度对复合纳米流体的分散与悬浮稳定性进行了表征. 对不同纳米颗粒配比的复合纳米流体润湿性能和摩擦学性能进行测试,结果表明:MWCNTs和MoS₂质量分数为0.6%、1.2%时复合纳米流体的铺展成膜能力最好,其接触角约为63.04°,相比于去离子水降低了23.55%. 摩擦磨损测试结果也表明此配比下的减摩抗磨性能最佳,平均摩擦系数为0.073,比去离子水降低了61.98%,同时体积磨损率降低了67.87%. 磨痕形貌观测表明,最优配比下磨痕浅,且表面光滑、无犁沟. X射线光电子能谱(XPS)表明MWCNTs和MoS₂共同参与摩擦并在基底成膜,由此协同实现了高效润滑.      

黏弹性纳米流体在垂直板上的自然对流与传热分析

基于分数阶Maxwell模型和分数阶Fourier定律构建黏弹性纳米流体在垂直板上的非定常二维边界层自然对流与传热控制方程,利用有限差分和L1算法获得数值稳定解,对不同物理参数下的速度、温度、平均表面摩擦系数和平均Nusselt数的变化趋势进行图形化分析。结果显示,速度和温度边界层均表现出短暂记忆和延迟特性;速度分数导数参数削弱了自然对流,而速度松弛时间的影响却相反;温度分数导数参数削弱了自然对流和热传导,而温度松弛时间的影响却相反。     

管道凸起激波/湍流边界层干扰的数值模拟

采用基于部分平均的湍流方程组,模拟了管道凸起流动中两种不同强度的激波-湍流边界层干扰现象,对流场的时均参数与实验值进行了比较,计算得到的壁面压力分布、摩阻系数分布、边界层厚度和速度型与实验值比较吻合很好.结果表明基于部分平均的湍流方程组既能够准确模拟小分离的激波/湍流边界层干扰流动又能够准确模拟大分离的激波/湍流边界层干扰流动,较好地预测了典型的λ激波结构.     

磁控溅射氮化钛/氮化铝纳米多层膜的抗磨性能及其在金属加工刀具中的应用研究

采用新型高速反应真空磁控溅射系统制备了氮化钛/氮化铝纳米多层膜,探讨了周期(λ)对多层膜力学性能及抗磨性能的影响;在微钻针及车刀表面分别制备了上述多层膜,并分别对电路板以及中碳钢棒进行实机加工测试,以验证其实用性.结果表明:通过控制溅射参数可以制备出周期范围为2.4～67.6nm的氮化钛/氮化铝多层膜;当周期λ≤3.6nm时,相应的多层膜具有较高的硬度、良好的粘附性能及优异的抗磨性能.实机测试结果显示,所制备的多层膜可以改善金属车削和微钻削加工条件,改善程度优于单层氮化钛镀膜.     

MHD flow and heat transfer of a hybrid nanofluid past a permeable stretching/shrinking wedge

The steady flow and heat transfer of a hybrid nanofluid past a permeable stretching/shrinking wedge with magnetic field and radiation effects are studied. The governing equations of the hybrid nanofluid are converted to the similarity equations by techniques of the similarity transformation. The bvp4c function that is available in MATLAB software is utilized for solving the similarity equations numerically. The numerical results are obtained for selected different values of parameters. The resul...     

Flow and heat transfer of nanofluid past stretching/shrinking sheet with partial slip boundary conditions

The boundary layer flow of a nanofluid past a stretching/shrinking sheet with hydrodynamic and thermal slip boundary conditions is studied. Numerical solutions to the governing equations are obtained using a shooting method. The results are found for the skin friction coefficient, the local Nusselt number, and the local Sherwood number as well as the velocity, temperature, and concentration profiles for some values of the velocity slip parameter, thermal slip parameter, stretching/shrinking parameter, thermophoresis parameter, and Brownian motion parameter. The results show that the local Nusselt number, which represents the heat transfer rate, is lower for higher values of thermal slip parameter, thermophoresis parameter, and Brownian motion parameter.     

Numerical solutions to heat transfer of nanofluid flow over stretching sheet subjected to variations of nanoparticle volume fraction and wall temperature

The numerical analysis of heat transfer of laminar nanofluid flow over a fiat stretching sheet is presented. Two sets of boundary conditions （BCs） axe analyzed, i.e., a constant （Case 1） and a linear streamwise variation of nanopaxticle volume fraction and wall temperature （Case 2）. The governing equations and BCs axe reduced to a set of nonlinear ordinary differential equations （ODEs） and the corresponding BCs, respectively. The dependencies of solutions on Prandtl number Pr, Lewis number Le, Brownian motion number Nb, and thermophoresis number Nt are studied in detail. The results show that the reduced Nusselt number and the reduced Sherwood number increase for the BCs of Case 2 compared with Case 1. The increases of Nb, Nt, and Le numbers cause a decrease of the reduced Nusselt number, while the reduced Sherwood number increases with the increase of Nb and Le numbers. For low Prandtl numbers, an increase of Nt number can cause to decrease in the reduced Sherwood number, while it increases for high Prandtl numbers.     

DTM-BF method and dual solutions for unsteady MHD flow over permeable shrinking sheet with velocity slip

An unsteady magnetohydrodynamic (MHD) boundary layer flow over a shrinking permeable sheet embedded in a moving viscous electrically conducting fluid is investigated both analytically and numerically. The velocity slip at the solid surface is taken into account in the boundary conditions. A novel analytical method named DTMBF is proposed and used to get the approximate analytical solutions to the nonlinear governing equation along with the boundary conditions at infinity. All analytical results are compared with those obtained by a numerical method. The comparison shows good agreement, which validates the accuracy of the DTM-BF method. Moreover, the existence ranges of the dual solutions and the unique solution for various parameters are obtained. The effects of the velocity slip parameter, the unsteadiness parameter, the magnetic parameter, the suction/injection parameter, and the velocity ratio parameter on the skin friction, the unique velocity, and the dual velocity profiles are explored, respectively.     

Unsteady three-dimensional boundary layer flow due to a permeable shrinking sheet

The unsteady viscous flow over a continuously permeable shrinking surface is studied. Similarity equations are obtained through the application of similar transformation techniques. Numerical techniques are used to solve the similarity equations for different values of the unsteadiness parameter, the mass suction parameter, the shrinking parameter and the Prandtl number on the velocity and temperature profiles as well as the skin friction coefficient and the Nusselt number. It is found that, different from an unsteady stretching sheet, dual solutions exist in a certain range of mass suction and unsteadiness parameters.     

Magnetohydrodynamic flow past a shrinking vertical sheet in a dusty hybrid nanofluid with thermal radiation

The magnetohydrodynamic(MHD) mixed convection flow past a shrinking vertical sheet with thermal radiation is considered. Besides, the effects of Cu-Al₂O₃ nanoparticles and dust particles are considered. The similarity variables reduce the governing equations to the similarity equations, which are then solved numerically. The outcome shows that, for the shrinking case, the solutions are not unique. The rate of heat transfer and the friction factor enlarge with increasing the...     

Similarity solutions to viscous flow and heat transfer of nanofluid over nonlinearly stretching sheet

The boundary-layer flow and heat transfer in a viscous fluid containing metallic nanoparticles over a nonlinear stretching sheet are analyzed. The stretching velocity is assumed to vary as a power function of the distance from the origin. The governing partial differential equation and auxiliary conditions are reduced to coupled nonlinear ordinary differential equations with the appropriate corresponding auxiliary conditions. The resulting nonlinear ordinary differential equations (ODEs) are solved numerically. The effects of various relevant parameters, namely, the Eckert number Ec, the solid volume fraction of the nanoparticles φ, and the nonlinear stretching parameter n are discussed. The comparison with published results is also presented. Different types of nanoparticles are studied. It is shown that the behavior of the fluid flow changes with the change of the nanoparticles type.     

MHD stagnation-point flow and heat transfer towards stretching sheet with induced magnetic field

The problem of the steady magnetohydrodynamic (MHD) stagnation-point flow of an incompressible viscous fluid over a stretching sheet is studied. The effect of an induced magnetic field is taken into account. The nonlinear partial differential equations are transformed into ordinary differential equations via the similarity transformation. The transformed boundary layer equations are solved numerically using the shooting method. Numerical results are obtained for various magnetic parameters and Prandtl numbers. The effects of the induced magnetic field on the skin friction coefficient, the local Nusselt number, the velocity, and the temperature profiles are presented graphically and discussed in detail.     

Effects of slip condition on MHD stagnation-point flow over a power-law stretching sheet

The steady two-dimensional magnetohydrodynamic stagnation flow towards a nonlinear stretching surface is studied. The no-slip condition on the solid boundary is replaced with a partial slip condition. A scaling group transformation is used to get the invariants. Using the invariants, a third-order ordinary differential equation corresponding to the momentum is obtained. An analytical solution is obtained in a series form using a homotopy analysis method. Reliability and efficiency of series solutions are shown by the good agreement with numerical results presented in the literature. The effects of the slip parameter, the magnetic field parameter, the velocity ratio parameter, the suction velocity parameter, and the power law exponent on the flow are investigated. The results show that the velocity and shear stress profiles are greatly influenced by these parameters.     

Dual solutions in MHD stagnation-point flow of Prandtl fluid impinging on shrinking sheet

The present article investigates the dual nature of the solution of the magneto- hydrodynamic （MHD） stagnation-point flow of a Prandtl fluid model towards a shrinking surface. The self-similar nonlinear ordinary differential equations are solved numerically by the shooting： method. It is found that the dual solutions of the flow exist for cer- tain values of tile velocity ratio parameter. The special case of the first branch solutions （the classical Newtonian fluid model） is compared with the present numerical results of stretching flow. The results are found to be in good agreement. It is also shown that the boundary layer thickness for the second solution is thicker than that for the first solution.