Effect of environmental parameters on the sequestration of radionickel by Mg2Al layered double hydroxide

In this work, sequestration of Ni(II) from aqueous solution to Mg₂Al layered double hydroxide (Mg₂Al LDH) by adsorption process as a function of various water quality parameters and temperature was investigated. The results showed that the kinetic adsorption could be described by a pseudo-second order model very well. The adsorption of Ni(II) on Mg₂Al LDH was strongly dependent on pH and ionic strength. The presence of humic acid (HA)/fulvic acid (FA) enhanced the adsorption of Ni(II) on Mg₂Al LDH at low pH, whereas reduced Ni(II) adsorption at high pH. The Langmuir model fitted the adsorption isotherms of Ni(II) better than the Freundlich model at three different temperatures of 298, 318 and 338 K. The thermodynamic parameters (ΔH^o, ΔS^o and ΔG^o) calculated from the temperature dependent adsorption isotherms indicated that the adsorption process of Ni(II) on Mg₂Al LDH was endothermic and spontaneous. The results show that Mg₂Al LDH is a promising material for the preconcentration and separation of pollutants from large volumes of aqueous solutions.     

Immobilization of uranium(VI) onto Mg2Al layered double hydroxide: role of key geochemical parameters

In this study, the sorption of U(VI) from aqueous solution on Mg₂Al layered double hydroxide (Mg₂Al LDH) was studied as a function of various water quality parameters such as contact time, pH, ionic strength, soil fulvic acid (FA), solid content and temperature by using a batch technique. The sorption of U(VI) on Mg₂Al LDH was dependent on pH. The presence of FA increased U(VI) sorption at low pH, whereas decreased U(VI) sorption at high pH. Both kinetics and thermodynamic parameters of the sorption process were evaluated. It was found that the pseudo-second-order model was more suitable for our experiment. The Langmuir model fitted the sorption isotherms of U(VI) better than the Freundlich and D-R model at three different temperatures of 298, 303 and 313 K. The thermodynamic parameters (ΔH°, ΔS°, and ΔG°) were calculated from the temperature dependent sorption isotherms, and the results suggested that U(VI) sorption was a spontaneous and endothermic process. The results demonstrate that Mg₂Al LDH is a promising sorbent material for the preconcentration and separation of uranium pollution from large volumes of aqueous solutions.     

Removal of radiocobalt from aqueous solutions by kaolinite affected by solid content, pH, ionic strength, contact time and temperature

The kaolinite sample was characterized by Fourier transform infrared spectroscopy (FT-IR) and X-ray powder diffraction, and was applied as adsorbent for the removal of radiocobalt ions from radioactive wastewater. The results demonstrated that the sorption of Co(II) was strongly dependent on pH and ionic strength at low pH values, and independent of pH and ionic strength at high pH values. The sorption of Co(II) was dominated by outer-sphere surface complexation or ion exchange at low pH values, whereas inner-sphere surface complexation was the main sorption mechanism at high pH values. The sorption isotherms were well described by Langmuir, Freundlich and Dubinin–Radushkevich models. The thermodynamic parameters (i.e., ΔG°, ΔS°, ΔH°) calculated from the temperature-dependent sorption isotherms indicated that the sorption of Co(II) on kaolinite was an endothermic and spontaneous process. The results of high sorption capacity of kaolinite suggested that the kaolinite sample was a suitable material for the preconcentration of Co(II) from large volumes of aqueous solutions and as backfill materials in nuclear waste management.     

Sorption of Co(II) ong-alumina in the presence and absence of fulvic acid</p> </p>

Summary The removal of heavy metal ion Co(II) from aqueous solution was studied usingg-Al₂O₃ by batch technique. The experiments were performed at T=20±2 °C, in 0.01M NaNO₃ solutions and under aerobic conditions. The effect of pH, ionic strength, fulvic acid (FA) and alumina amount on the sorption of Co(II) on alumina were also investigated. The pH affected the sorption of Co(II) significantly as compared with the effect of FA and ionic strength. The results indicated that strong chemical bonds are formed between Co(II) and functional groups of the bare or FA coated alumina, and a precipitation of Co(II) takes place on the alumina surface, induced by a transition from the adsorption to surface. The addition sequences of Co/FA on Co(II) sorption were also studied: the sorption of Co(II) in the ternary system was found independent of addition sequences.</p> </p>     

Synthesis, characterization, and application of titanate nanotubes for Th(IV) adsorption

Titanate nanotubes (TNTs) have been synthesized by a hydrothermal method using rutile TiO₂ powder as titanium source. The determination of the structure and morphology was characterized by XRD, FTIR, SEM and TEM. The results indicate that the TNTs successfully synthesized under hydrothermal conditions of 150 °C. The adsorption of Th(IV) on TNTs was studied as a function of contact time, pH values, ionic strength, initial Th(IV) concentration and temperature under ambient conditions by using batch technique. The results indicate that adsorption of Th(IV) on TNTs is strongly dependent on pH values, but weakly dependent on ionic strength; Adsorption kinetics was better described by the pseudo-second-order model. The adsorption isotherms are simulated by Langmuir and Freundlich models well. ΔG°, ΔH° and ΔS° free energy were calculated from experimental data, The results indicate that the adsorption of Th(IV) on TNTs is an endothermic and a spontaneous process, and increases with increasing temperature. The adsorption of Th(IV) on TNTs is mainly dominated by chemical sorption or surface complexation.     

Thermodynamical and structural insights of orange II adsorption by MgRAlNO3 layered double hydroxides

[Mg_1−x Al_x(OH)₂][(NO₃)_x, nH₂O] Layered Double Hydroxide (LDH) sorbents with variable Mg/Al molar (R=(1−x)/x) ratios were investigated for adsorption of azo dye, orange II (OII) at various pH and temperature conditions. Mg₂AlNO₃ displays the highest adsorption capacity with 3.611 mmol of OII per gram of Mg₂AlNO₃ at 40 °C. Adsorption isotherms have been fitted using the Langmuir model and free energy of adsorption (ΔG°), enthalpy (ΔH°) and entropy (ΔS°) were calculated. The experimental values for ΔG° in temperature range between 10 and 40 °C were found to be negative indicating that a spontaneous process occurred. Positive calculated enthalpy values, characteristic of an endothermic process were found. Characterization of solids (PXRD, FTIR, UV-vis, TGA/DTA, adsorption isotherm BET analysis, SEM and Zetametry) before and after adsorption showed that adsorption proceeds in two steps. First, adsorption occurs at the LDH surface, followed by intercalation via anion exchange.     

Complexation and sorption studies of Co(II) with γ-alumina-bound fulvic acid: effect of pH,ionic strength,fulvic acid and alumina concentration

The removal of heavy metal ion Co(II) from aqueous solution is studied using γ-Al₂O₃ by batch technique. The experiments are performed at T = 20 ± 2 °C, in 0.01 M NaNO₃ solutions and under aerobic conditions. The effect of pH, ionic strength, fulvic acid (FA) and alumina concentration on the sorption of Co(II) on alumina are also respectively investigated. The pH affects the sorption of Co(II) significantly as compared with the effect of FA and ionic strength. The results indicate that strong chemical bonds are formed between Co(II) and the bare or FA coated alumina surface, and a transition from the adsorption to surface-induced precipitation of Co(II) on alumina surface takes place. The addition sequences of Co/FA on Co(II) sorption is also studied and the results indicate that the sorption of Co(II) in ternary system is independent of addition sequences. The results also suggest that the sorption of metal ions on mineral surface depends on the nature of mineral, nature of organic ligand and nature of metal ion.     

Removal of radiocobalt ions from aqueous solutions by natural halloysite nanotubes

In this study, natural halloysite nanotubes (HNTs) were applied to remove radiocobalt from wastewaters under various environmental parameters such as contact time, pH, ionic strength, foreign ions and temperature by using batch technique. The results indicated that the sorption of Co(II) on HNTs was dependent on ionic strength at pH < 8.5 and independent of ionic strength at pH > 8.5. Langmuir and Freundlich models were applied to simulate the sorption isotherms of Co(II) at three different temperatures of 293, 313 and 333 K. Langmuir model fitted the sorption isotherms of Co(II) on HNTs better than Freundlich model. The thermodynamic parameters (ΔG ⁰, ΔS ⁰ and ΔH ⁰) calculated from the temperature-dependent sorption isotherms manifested that the sorption of Co(II) on HNTs was an endothermic and spontaneous process. The sorption of Co(II) was dominated by outer-sphere surface complexation or ion exchange at low pH, whereas inner-sphere surface complexation or precipitation was the main sorption mechanism at high pH. The experimental results show that HNTs have good potentialities for cost-effective disposal of cobalt-bearing wastewaters.     

Thermodynamic studies of Ni(II) adsorption onto bentonite from aqueous solution

The adsorption behavior of Ni(II) onto bentonite was studied as a function of temperature under optimized conditions of shaking time, amount of adsorbent, pH, and concentration of the adsorbate. Thermodynamic parameters such as ΔH^°, ΔS^°, and ΔG^° were calculated from the slope and intercept of the linear plot of lgK_D against 1/T. Analysis of adsorption results obtained at T=(298, 303, 313, and 323) K showed that the adsorption pattern on bentonite followed the Langmuir, Freundlich, and D-R isotherms. A flame atomic absorption spectrophotometer was used for measuring the concentration of Ni(II).     

Removal of Co(II) from aqueous solution by using hydroxyapatite

Herein, hydroxyapatite (HAP) was prepared by aqueous precipitation technique and was characterized by using FT-IR and XRD to determine its chemical functional groups and micro-structure. The removal of cobalt from aqueous solution to HAP was studied by batch technique as a function of various environmental parameters such as contact time, pH, ionic strength, foreign ions, fulvic acid (FA), and temperature under ambient conditions. The results indicated that the sorption of Co(II) on HAP was strongly dependent on pH and ionic strength. The presence of FA enhanced the sorption of Co(II) on HAP at low pH, whereas reduced Co(II) sorption on HAP at high pH. The Langmuir, Freundlich and D-R models were used to simulate the sorption isotherms at three different temperatures of 303.15, 323.15 and 343.15 K. The thermodynamic parameters (ΔH°, ΔS° and ΔG°) calculated from the temperature dependent sorption isotherms indicated that the sorption process of Co(II) on HAP was spontaneous and endothermic. The sorption of Co(II) was dominated by outer-sphere surface complexation and ion exchange at low pH, whereas inner-sphere surface complexation or surface precipitation was the main sorption mechanism at high pH values. The results suggest that the HAP is a suitable material in the preconcentration and solidification of Co(II) from large volumes of aqueous solutions.     

Removal of Th(IV), Ni(II)and Fe(II) from aqueous solutions by a novel PAN–TiO<Subscript>2</Subscript> nanofiber adsorbent modified with aminopropyltriethoxysilane

A novel polyacrylonitrile (PAN)–titanium oxide (TiO₂) nanofiber adsorbent functionalized with aminopropyltriethoxysilane (APTES) was fabricated by electrospinning. The adsorbent was characterized by SEM, FTIR, TEG and BET analyses. The pore diameter and surface area of the adsorbent were 3.1 nm and 10.8 m² g^?1, respectively. The effects of several variables, such as TiO₂ and amine contents, pH, interaction time, initial concentration of metal ions, ionic strength and temperature, were studied in batch experiments. The kinetic data were analyzed by pseudo-first-order, pseudo-second-order and double-exponential models. Two isotherm models, namely Freundlich and Langmuir, were used for analysis of equilibrium data. The maximum adsorption capacities of Th(IV), Ni(II) and Fe(II) by Langmuir isotherm were found to be 250, 147 and 80 mg g^?1 at 45 °C with pH of 5, 6 and 5, respectively, and greater adsorption of Th(IV) could be justified with the concept of covalent index and free energy of hydration. Calculation of ΔG°, ΔH° and ΔS° demonstrated that the nature of the Th(IV), Ni(II) and Fe(II) metal ions adsorption onto the PAN–TiO₂–APTES nanofiber was endothermic and favorable at a higher temperature. The negative values of ΔG° for Th(IV) showed that the adsorption process was spontaneous, but these values for Ni(II)and Fe(II) were positive and so the adsorption process was unspontaneous. Increasing of ionic strength improved the adsorption of Ni(II) and Fe(II) on nanofiber adsorbent but decreased the adsorption capacity of Th(IV). The adsorption capacity was reduced slightly after six cycles of adsorption–desorption, so the nanofiber adsorbent could be used on an industrial scale. The inhibitory effect of Ni(II) and Fe(II) on the adsorption of Th(IV) was increased with an increase in the concentration of inhibitor metal ions.     

Influence of pH,ionic strength,foreign ions and FA on adsorption of radiocobalt on goethite

This work contributed to the adsorption of radiocobalt on goethite as a function of contact time, pH, ionic strength and foreign ions in the absence and presence of fulvic acid (FA) under ambient conditions. The results indicated that adsorption of Co(II) was dependent on ionic strength and foreign ions at low pH values (pH < 7.8), and independent of ionic strength and foreign ions at high pH values (pH > 7.8). Outer-sphere surface complexation and/or ion exchange were the main mechanisms of Co(II) adsorption on goethite at low pH values, whereas inner-sphere surface complexation was the main adsorption mechanism at high pH values. The presence of FA enhanced Co(II) adsorption at low pH values, but reduced Co(II) adsorption at high pH values. The thermodynamic data (ΔH ⁰, ΔS ⁰, ΔG ⁰) were calculated from the temperature dependent adsorption isotherms, and the results suggested that adsorption process of Co(II) on goethite was spontaneous and endothermic. The results are crucial to understand the physicochemical behavior of Co(II) in the nature environment.     

Impact of environmental conditions on the sorption behavior of 60Co(II) on illite

In this work, a naturally occurring illite was characterized by using FT-IR and XRD technique to determine its surface functional groups and crystal structure. Sorption of ⁶⁰Co(II) on illite as a function of contact time, pH, ionic strength, foreign ions, humic substances and temperature was studied under ambient condition using batch technique. The results indicated that the sorption of ⁶⁰Co(II) on illite is strongly affected by pH values (2–9) and ionic strength. A positive effect of humic substances on ⁶⁰Co(II) sorption was found at pH < 7.0, whereas a negative effect was observed at pH > 7.0. At low pH, the sorption of ⁶⁰Co(II) was dominated by outer-sphere surface complexation and ion exchange with Na⁺/H⁺ on illite surfaces, whereas inner-sphere surface complexation was the main sorption mechanism at high pH. The Langmuir and Freundlich models were used to simulate the sorption isotherms of ⁶⁰Co(II) at three different temperatures of 298.15, 323.15 and 343.15 K. The thermodynamic parameters (ΔH ⁰, ΔS ⁰ and ΔG ⁰) calculated from the temperature dependent sorption isotherms indicated that the sorption process of ⁶⁰Co(II) on illite was endothermic and spontaneous.     

Preparation and characterization of nanosized TiO2 powder as an inorganic adsorbent for aqueous radionuclide Co(II) ions

In this research TiO₂ sample was synthesized by a simple sol–gel method and was characterized by X-ray diffraction (XRD), Transmission electron microscopy (TEM) and Brunauer–Emmett–Teller (BET) techniques. The XRD result indicated that the obtained product was anatase titanium dioxide with high purity, the TEM image clearly showed that the particle sizes of TiO₂ nanoparticles were in the range of 30–70 nm, and the measured BET surface area of the heated TiO₂ nanoparticles was 147.14 m²/g. In this work, the prepared TiO₂ sample was used as a new adsorbent for the adsorption of radionuclide Co(II) ions from aqueous solutions, and the influence of pH, contact time, ionic strength and temperature in the presence or absence of humic acid/fulvic acid (HA/FA) were also investigated. The experimental results indicated that the adsorption of Co(II) ions onto TiO₂ was strongly pH-dependent. Based on the surface complexation, the presence of HSs enhanced the adsorption of Co(II) ions and the influence of Co(II) adsorption onto FA–TiO₂ hybrids was much stronger than that of HA–TiO₂ at pH values of 2.0–9.0. Adsorption of Co(II) ions onto TiO₂ powder was strongly dependent on ionic strength. The adsorption process mainly occured in the first contact time of 2 h and could be fitted by a pseudo-second-order rate model. The calculated thermodynamic data indicated that the adsorption of Co(II) ions onto TiO₂ was a spontaneous process and favorable at high temperatures.     

Uranium extraction from aqueous solution using dried and pyrolyzed tea and coffee wastes

The adsorption of U(VI) onto dried and pyrolyzed tea and coffee wastes was investigated. The adsorption properties of the materials were characterized by measuring uranium uptake as a function of solution pH, kinetics and adsorption isotherms. pH profile of uranium adsorption where UO₂ ²⁺ is expected to be the predominant species was measured between pH 0 and 4. Both Langmuir and Freundlich adsorption models were used to describe adsorption equilibria, and corresponding constants evaluated. Using the Langmuir model, the maximum adsorption capacity of uranium by dried tea and coffee wastes was 59.5 and 34.8 mg/g, respectively at 291 K. Adsorption thermodynamic constants, ΔH° ΔS° and ΔG° were also calculated from adsorption data obtained at three different temperatures. Adsorption thermodynamics of uranyl ions on dried tea and coffee systems indicated spontaneous and endothermic processes. Additionally, a Lagergren pseudo-second-order kinetic model was used to fit the kinetic experimental data for both adsorbents and the constants evaluated. Dried tea and coffee wastes proved to be effective adsorbents with high capacities and significant advantage of a very low cost.     

Effect of environmental conditions on 109Cd(II) sorption to MnO2

The sorption of Cd(II) from aqueous solution on MnO₂ was investigated under ambient conditions. Experiments were carried out as a function of contact time, solid content, pH, ionic strength, foreign ions, fulvic acid and temperature. The results indicated that the sorption of Cd(II) was strongly dependent on pH and ionic strength. At low pH, the sorption of Cd(II) was dominated by outer-sphere surface complexation and ion exchange with Na⁺/H⁺ on MnO₂ surfaces, whereas inner-sphere surface complexation was the main sorption mechanism at high pH. The Langmuir, Freundlich and Dubinin–Radushkevich models were used to simulate the sorption isotherms at three different temperatures. The thermodynamic data (ΔG ⁰, ΔS ⁰, ΔH ⁰) calculated from the temperature dependent sorption isotherms suggested that the sorption of Cd(II) on MnO₂ was an spontaneous and endothermic process.     

Sorption of radiocobalt(II) from aqueous solutions to Na-attapulgite

The sorption of Co(II) on Na-attapulgite as a function of contact time, solid content, pH, ionic strength, foreign ions, fulvic acid (FA) and temperature under ambient conditions was studied. The kinetic of Co(II) sorption on Na-attapulgite was described well by pseudo-second-order model. The sorption of Co(II) on Na-attapulgite was strongly dependent on pH and ionic strength. The sorption of Co(II) was mainly dominated by outer-sphere surface complexation and/or ion exchange at low pH, whereas inner-sphere surface complexation or surface precipitation was the main sorption mechanism at high pH values. The presence of FA did not affect Co(II) sorption obviously at pH <7, and a negative effect was observed at pH >7. The Langmuir and Freundlich models were used to simulate the sorption data at different temperatures, and the results indicated that the Langmuir model simulated the data better than the Freundlich isotherm model. The thermodynamic parameters (∆G°, ∆S°, ∆H°) calculated from the temperature-dependent sorption isotherms indicated that the sorption of Co(II) on Na-attapulgite was an endothermic and spontaneous process. The results suggest that the attapulgite sample is a suitable material in the preconcentration and solidification of radiocobalt from large volumes of aqueous solutions.     

Impact of environmental conditions on the sorption behavior of radionuclide <Superscript>60</Superscript>Co(II) on MnO<Subscript>2</Subscript>

The fate and transport of toxic metal ions and radionuclides in the environment is generally controlled by sorption reactions. The removal of ⁶⁰Co(II) from wastewaters by MnO₂ was studied as a function of various environmental parameters such as shaking time, pH, ionic strength, foreign ions, and humic substances under ambient conditions. The results indicated that the sorption of ⁶⁰Co(II) on MnO₂ was strongly dependent on pH and ionic strength. At low pH, the sorption of ⁶⁰Co(II) was dominated by outer-sphere surface complexation and ion exchange with Na⁺/H⁺ on MnO₂ surfaces, whereas inner-sphere surface complexation was the main sorption mechanism at high pH. The presence of HA/FA enhances ⁶⁰Co(II) sorption at low pH values, whereas reduces ⁶⁰Co(II) sorption at high pH values. The Langmuir and Freundlich models were used to simulate the sorption isotherms of ⁶⁰Co(II) at three different temperatures of 298.15, 318.15 and 338.15 K. The thermodynamic parameters (ΔH ⁰, ΔS ⁰ and ΔG ⁰) calculated from the temperature dependent sorption isotherms indicated that the sorption process of ⁶⁰Co(II) on MnO₂ was endothermic and spontaneous.     

Impact of environmental conditions on the sorption behavior of Pb(II) onto attapulgite

This paper examined the application of attapulgite as an adsorbent for the removal of Pb(II) from heavy metal-contaminated water under various conditions. The sorption results indicated that the sorption of Pb(II) on attapulgite was strongly dependent on ionic strength at pH < 7.0. Outer-sphere surface complexation or ion exchange may be the main sorption mechanism of Pb(II) on attapulgite at low pH values. No drastic difference of Pb(II) sorption was observed at pH 7.0–10.0, and the sorption at pH > 10.0 was mainly dominated by inner-sphere surface complexation. The sorption of Pb(II) on attapulgite was affected by foreign ions in solution at pH < 7.0, and was not affected by foreign ions at pH > 7.0. The thermodynamic parameters (ΔH°, ΔS° and ΔG°) were evaluated from the temperature-dependent sorption isotherms, and the results indicated that the sorption process of Pb(II) on attapulgite was spontaneous and endothermic in nature.     

Spectroscopic studies and determination of the formation constants and thermodynamic parameters for a new water-soluble Co(II) Schiff-base complex and some imidazole derivatives

A new water-soluble Co(II) Schiff-base complex, sodium[{N,N′-bis(5-sulfosalicylidene)-1,8-diamino-3,6-dioxaoctan}cobalt] dihydrate, abbreviated as Na₂[Co(II)L], was synthesized and characterized. The formation constants and thermodynamic parameters for the interaction of this complex with imidazole (Im) and 1-methylimidazole (MeIm) were determined spectroscopically in aqueous solution, ethanol/water (10/90), and methanol/water (10/90) under physiological conditions (pH?=?7), constant ionic strength (I?=?0.1?mol?dm^?3 KNO₃), and various temperatures ranging from 294 to 310?K. Our spectroscopic and thermodynamic results show that this adduct formation is endothermic and the positive values of ΔS _f° make ΔG _f° negative. The trend in variation of ΔH _f° and ΔS _f° for Im is in the order water?>?methanol?>?ethanol, but for MeIm it is in the opposite order which is related to the hydrogen bonding between solvents and these donors. Formation constants between MeIm and Na₂[Co(II)L] in these three solvents are larger than for Im which depends on the electron donation of methyl on MeIm.