A biomimetic "polysoap" for single-walled carbon nanotube dispersion

As-synthesized single-walled carbon nanotubes (SWNTs) are bundled mixtures of different species. The current challenge in the field of carbon nanotube research lies in the processing and separation of SWNTs, which first require efficient dispersion of individual SWNTs in solvents. We report DNA-mimicking polysoap surfactants that disperse SWNTs in aqueous solutions more effectively than DNA. The polysoaps are synthesized by functionalizing the side chain of poly(styrene-alt-maleic acid) with aminopyrene. The synthetic nature of the polysoap opens a new approach to further optimization of not only SWNT dispersion efficiency but also multi-functional SWNT dispersing surfactant.     

Sonication-Free Dispersion of Single-Walled Carbon Nanotubes for High-Sorption-Capacity Aerogel Fabrication

Homogenously dispersing single-walled carbon nanotubes (SWNTs) in solvents has been one critical step towards exploiting their exceptional properties in high-performance components. However, the solubility of SWNTs is severely limited by the inert tube surfaces and strong tube-tube van der Waals attractions. Starting with carbon nanotubides, i.e., negatively charged SWNTs reduced by alkali metals, we herein propose a sonication-free approach to prepare an aqueous dispersion of SWNTs. The approach combines the spontaneous dissolution of nanotubides in polar aprotic solvents with polyvinylpyrrolidone wrapping and dialysis in deionized H₂O, which results in well-dispersed, neutralized SWNTs. The gelation of concentrated SWNT dispersion leads to the formation of hydrogels, which is subsequently transformed into SWNT aerogels through lyophilization. The prepared SWNT aerogels exhibit high-mass-sorption capacities for organic solvent absorption, paving the way towards harvesting the extraordinary properties of SWNTs.     

Helical superstructures of fullerene peapods and empty single-walled carbon nanotubes formed in water

Aqueous dispersions of fullerene C70-filled carbon nanotubes (C70@SWNTs or peapods) and empty single-walled carbon nanotubes (empty SWNTs) were prepared with the aid of trimethyl-(2-oxo-2-pyrene-1-yl-ethyl)-ammonium bromide (1), which is a carbon nanotube solubilizer. This is the first report describing the preparation and characterization of the transparent dispersion/dissolution of the peapods. The UV-vis-near-IR spectra of C70@SWNTs-1 and empty SWNTs-1 were almost identical. We found by means of transmission electron microscopy and atomic force microscopy that the empty SWNTs and C70-peapods form helical nanostructures in the shapes of rings, irregular rings, lassos, handcuffs, catenanes, pseudorotaxanes, and figure-eight structures. The mechanism of the superstructure formation has been discussed in relation to the unique characteristics of stiff polymer chains with the aid of an off-lattice Monte Carlo simulation.     

Dispersion and separation of small-diameter single-walled carbon nanotubes

The dispersion of small-diameter single-walled carbon nanotubes (SWNTs) produced by the CoMoCAT method in tetrahydrofuran (THF) with the use of amine was studied. The absorption, photoluminescence, and Raman spectroscopies showed that the dispersion and centrifugation process leads to an effective separation of metallic SWNTs from semiconducting SWNTs. Since this method is simple and convenient, it is highly applicable to an industrial utilization for widespread applications of SWNTs.     

Aqueous dispersion, surface thiolation, and direct self-assembly of carbon nanotubes on gold

We report the efficient aqueous dispersion of pristine HiPco single-walled carbon nanotubes (SWNTs) with ionic liquid (IL)-based surfactants 1-dodecyl-3-methylimidazolium bromide (1) and 1-(12-mercaptododecyl)-3-methylimidazolium bromide (2), the thiolation of nanotube sidewalls with 2, and the controlled self-assembly of positively charged SWNT-1,2 composites on gold. Optical absorption spectra and resonance Raman (RR) data of obtained aqueous SWNT-1,2 dispersions are consistent with debundled and noncovalently functionalized nanotubes whose electronic properties have not been disturbed. Additionally, the dispersion of pristine nanotube material with surfactants 1 and 2 leads to a high degree of purification from carbonaceous particles. The chiralities of the 14 smallest semiconducting HiPco SWNTs in resonance with Raman excitation at 1064 nm (1.165 eV) were determined in SWNT-2 aqueous dispersion using UV-vis-NIR and RR spectra. X-ray photoelectron spectroscopy (XPS) and surface-enhanced resonance Raman scattering (SERRS) spectroscopy of SWNT-2 submonolayers on gold verified the encapsulation of individualized SWNTs with IL surfactants, the cleavage of S-S disulfide bonds formed in aqueous SWNT-2 suspensions, and the direct chemisorption of the SWNT-2 composite on bare gold via the Au-S bond. Aqueous dispersions of SWNTs with IL-based surfactants add biofunctionality to carbon nanotubes by imparting the positive surface charge necessary for interactions with cell membranes. Our technique, which purifies pristine nanotube material and produces water-soluble, positively charged nanotubes with pendent surface-active thiol groups, may also be translated to other carbon nanotubes and carbon nanostructures. Self-assembled, positively charged submonolayers of SWNTs can be further used for applications in cell biology and sensor technology.     

Dispersing carbon nanotubes using surfactants

We review the recent advances in dispersing single-wall carbon nanotubes (SWNTs) using amphiphilic surfactants in aqueous solutions. Three aspects are discussed. (1) On the organization of surfactant molecules with SWNTs, new insights at the microscopic level arise from electron microscopy and detailed computer simulation studies. (2) Quantitative measurements, such as molecular interactions between functional groups and SWNTs, the coverage of surfactant on SWNTs in solution, the charge state of the SWNT/surfactant complex, and the degree of dispersion are critical for better understanding dispersion mechanisms and for the further development of dispersion strategies. (3) The thermodynamic driving forces and the role of metastability in the structure of surfactant dispersed SWNT suspensions are analyzed. An outlook on practical and fundamental issues is also presented.     

Synergistically Enhanced Dispersion of Native Protein–Carbon Nanotube Conjugates by Fluoroalcohols in Aqueous Solution

Carbon nanotubes (CNTs) are anticipated as an important new material for use in nanotechnology applications because of their excellent mechanical and electrical properties. For their development, a highly stable dispersion of debundled CNTs is indispensable. Herein we present a new method to enhance dispersibility of single‐walled carbon nanotubes (SWNTs) with proteins using alcohols as co‐solvents. Addition of fluoroalcohols in solution increased the SWNT dispersion by more than one order of magnitude without protein denaturation. Enhancement of SWNT dispersion through addition of alcohols was attributed to the decreased hydrophobic interaction among SWNTs. This novel approach enables us to produce biofunctional CNTs such as one‐dimensional nanobiosensors and drug carriers that can penetrate cells.     

Controlling photochromism between fluoroalkyl end-capped oligomer/polyaniline and N,N'-diphenyl-1,4-phenylenediamine nanocomposites induced by UV-light-responsive titanium oxide nanoparticles

Debundling and selective dispersion of semiconducting single-walled carbon nanotubes (SWNTs) has been demonstrated using a neutral pH water soluble chitosan derivative, N-acetylated chitosan (NACHI), which is synthesized by controlled N-acetylation of chitosan using acetic anhydride. The SWNT-NACHI supernatant solution demonstrated semiconductor-enriched property owing to the preferential adsorption of N-groups of the NACHI on semiconducting nanotubes with a fairly weak charge transfer. The dispersion of nearly individualized SWNTs achieved by surface modification of nanotubes with a biocompatible polymer can be utilized for electronic and biomedical applications such as field effect transistor, biosensor, cell culture medium and SWNT-biomacromolecule hybrid materials.     

CVD growth of single-walled carbon nanotubes with narrow diameter distribution over Fe/MgO catalyst and their fluorescence spectroscopy

Single-walled carbon nanotubes (SWNTs) with a narrow diameter distribution are synthesized by thermal chemical vapor deposition (CVD) of methane over Fe/MgO catalyst on the basis of parametric study considering Fe loading, reaction temperature and time, methane concentration, and structure of a support material. We found that the porous MgO support gives the SWNTs with a narrow diameter distribution with the mean diameter and standard deviation of 0.93 and 0.06 nm, respectively, only when the Fe loading and reaction temperature are relatively low. The higher Fe loading and/or the higher reaction temperature enlarged the nanotube diameter, forming double-walled carbon nanotubes (DWNTs) in addition to SWNTs. This result indicates that only the diameter of Fe nanoparticles determines the growth of either SWNTs or DWNTs on the MgO support. The fluorescence and absorption spectra of the nanotube dispersion in D(2)O solution with sodium dodecyl sulfate (SDS) were studied to identify their chirality distribution. The fluorescence of the uniform-diameter SWNTs indicates the formation of the near armchair structures. On the other hand, the SWNTs synthesized over the catalyst with a high Fe loading, 3 wt %, showed a wide chirality distribution including the near zigzag structure. The synthesis of the SWNTs with a narrow diameter distribution could be applied to the selection of SWNTs with a specific chirality based on postsynthesis separation.     

Rapidly functionalized, water-dispersed carbon nanotubes at high concentration

Microwave-assisted functionalization of single-wall carbon nanotubes (SWNTs) in a mixture of nitric and sulfuric acids was carried out to synthesize highly water-dispersible nanotubes. Stable concentrations as high as 10 mg/mL were obtained in deionized water that are nearly 2 orders of magnitude higher than those previously reported. This was after only 3 min of functionalization reaction. Fourier transform infrared spectra showed the presence of carboxylated (-COOH) and acid sulfonated (-SO(2).OH or -SO(3)(-) H(+)) groups on the SWNTs. On the basis of elemental analysis, it was estimated that one out of three carbon atoms was carboxylated, while one out of 10 carbon atoms was sulfonated. The Raman spectra taken both in aqueous dispersion and in the solid phase indicated charge transfer from the SWNT backbone to the functional groups. Scanning electron microscope images of thin films deposited from an aqueous suspension showed that the SWNTs were aligned parallel to one another on the substrate. The images also indicated some reduction in average length of the nanotubes. Transmission electron microscope images of thin films from a dilute methanol dispersion showed that the SWNTs were extensively debundled. Laser light scattering particle size measurements did not show evidence for the existence of particles in the 3-800 nm size range, indicating that the functionalized SWNTs might have dispersed to have formed a true solution. Moreover, the microwave-processed SWNTs were found to contain significantly smaller amounts of the original iron catalyst relative to that present in the starting nanotubes. The electrical conductivity of a thermally annealed thin membrane obtained from the microwave-functionalized SWNTs was found to be the same as that of a similar membrane obtained from a suspension of the starting nanotubes.     

Effects of surfactant and boron doping on the BWF feature in the Raman spectrum of single-wall carbon nanotube aqueous dispersions

We examine the Breit-Wigner-Fano (BWF) line shape in the Raman spectra of carbon single-wall nanotubes (SWNTs) dispersed in aqueous suspensions. Bundling and electronic effects are studied by comparing undoped SWNTs (C-SWNTs) to boron-doped nanotubes (B-SWNTs) in a variety of different surfactant solutions. For SWNTs dispersed with nonionic surfactants that are less effective in debundling than ionic surfactants, the Raman spectra retain a large BWF feature. However, we demonstrate that even for SWNTs dispersed as isolated nanotubes by ionic surfactants the BWF feature may be present and that the intensity of the BWF is highly sensitive to the specific surfactant. In particular, surfactants with electron-donating groups tend to enhance the BWF feature. Also, modification of the SWNT electronic properties by boron doping leads to enhanced surfactant dispersion relative to undoped C-SWNTs and also to modification of the BWF feature. These observations are in agreement with reports demonstrating an enhancement of the BWF by bundling but also agree with reports that suggest electron donation can enhance the BWF feature even for isolated SWNTs. Importantly, these results serve to caution against using the lack or presence of a BWF feature as an independent measure of SWNT aggregation in surfactant dispersions.     

Remarkable support effect of SWNTs in Pt catalyst for methanol electrooxidation

Carbon nanotubes have been proposed as advanced metal catalyst support for electrocatalysis. In this work, different carbon support materials including single-walled carbon nanotubes (SWNTs), multi-walled carbon nanotubes (MWNTs) and XC-72 carbon black, were compared in terms of their electrochemical properties using cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The SWNTs is found to exhibit the highest accessible surface area in electrochemical reactions and the lowest charge transfer resistance at the SWNTs/electrolytes. These carbon materials are then loaded with varying amount of Pt by the electrodeposition technique to prepare carbon supported Pt catalysts. Electrochemical measurements of methanol oxidation reveal that the SWNTs supported Pt catalyst exhibits the highest mass activity (mA/mg-Pt). In comparison with Pt-XC-72 and Pt-MWNTs, the remarkably enhanced electrocatalytic activity of the Pt-SWNTs maybe attributed to a higher dispersion and utilization of the Pt particles, which are directly related to the electrochemical characteristics of SWNTs. The high concentration of oxygen-containing functional groups, high accessible surface area, low charge transfer resistance at the carbon/electrolyte interfaces can be important for the Pt dispersing and strong metal-support interaction in the Pt-SWNTs catalyst.     

CVD法制备单壁碳纳米管的纯化与表征

针对CVD法合成的单壁碳纳米管的特点提出了较为有效的纯化方法，并对纯化后碳管的存在形式进行了表征.结果表明,CVD法制备的单壁碳纳米管中所含的载体和催化剂绝大部分可以通过盐酸除去.在表面活性剂溶液中超声分散碳纳米管,可以使管与无定形碳及石墨状碎片进行有效的剥离.空气加热氧化法和稀硝酸回流法可有效地去除碳杂质,稀硝酸回流可以在纯化的同时对管的末端及侧壁进行功能化.     

Liquid crystal behavior of single-walled carbon nanotubes dispersed in biological hyaluronic acid solutions

We report the spontaneous liquid crystal phase separation of nanotubes (single-walled carbon nanotubes, SWNTs) stabilized in aqueous biological (hyaluronic acid, HA) solutions. Sonication of SWNTs in solutions of HA produced well-dispersed single-phase isotropic dispersions which, over time, phase separated into dispersions containing birefringent nematic domains in equilibrium with an isotropic phase. The time required for phase separation to occur was shown to depend on the concentration of SWNT and HA, with the attractive interactions between the SWNT and HA shifting the onset of the phase separation toward lower concentration. This phase separation is accompanied by an increase in the dispersion viscosity with this increase qualitatively matching the degree of phase separation. The formation of ordered phases in biological media can offer wide opportunities for processing conducting biomaterials with aligned and oriented domains.     

Fluorescence derivatization of single-walled carbon nanotubes for analysis by means of conventional CE-LIF

Single-walled carbon nanotubes (SWNTs) are now widely used in many fields, and while many analytical methods for SWNTs have been reported, there are few practical analytical methods that combine the necessary levels of selectivity and sensitivity. We have developed a highly sensitive separation method for fluorescence-derivatized SWNTs by means of conventional CE with laser-induced fluorescence. First, SWNTs were dispersed using a triphenylene derivative into the water, and the excess dispersant was removed by nitric acid treatment. The dispersed SWNTs were then derivatized with a fluorescence reagent, 4-aminofluorescein. Finally, the derivatized SWNTs were analyzed using a conventional apparatus CE-LIF detection. The SWNTs migrated within 20 min. The detection sensitivity of SWNTs was improved by about 170 times with LIF detection as compared with UV detection. We anticipate that the derivatized SWNTs can also be detected with high sensitivity using LC.     

Antibacterial effects of carbon nanotubes: size does matter!

We provide the first evidence that the size (diameter) of carbon nanotubes (CNTs) is a key factor governing their antibacterial effects and that the likely main CNT-cytotoxicity mechanism is cell membrane damage by direct contact with CNTs. Experiments with well-characterized single-walled carbon nanotubes (SWNTs) and multiwalled carbon nanotubes (MWNTs) demonstrate that SWNTs are much more toxic to bacteria than MWNTs. Gene expression data show that in the presence of both MWNTs and SWNTs, Escherichia coli expresses high levels of stress-related gene products, with the quantity and magnitude of expression being much higher in the presence of SWNTs.     

The role of the medium in electrochemical functionalization and dispersion of carbon nanotubes

An electrochemical method for dispersion of single-walled carbon nanotubes (SWNTs) is described. The technique is based on grafting of oxygen-containing functional groups to the nanotube surface during electrolysis in aqueous and nonaqueous potassium bromide solutions. A dependence of the degree of functionalization of nanotubes on the solvent was revealed experimentally. Nanotubes treated in DMSO have about 14 carbon atoms per oxygen atom from functional groups (cf. nearly four C atoms per oxygen atom in the nanotubes treated in aqueous solutions). The corresponding maximum specific capacities of the electrodes are nearly 10 and 60 F g⁻¹. The samples treated in solutions of KBr in DMSO have about 300 carbon atoms per bromine atom on the nanotube surface (cf. only 30 carbon atoms in the samples treated in aqueous solution). A mechanism of electrochemical modification of SWNTs is proposed. Its key step is production of atomic oxygen that oxidizes the nanotube surface with the formation of functional groups.     

Influence of Polymer Electronics on Selective Dispersion of Single‐Walled Carbon Nanotubes

The separation and isolation of semiconducting and metallic single‐walled carbon nanotubes (SWNTs) on a large scale remains a barrier to many commercial applications. Selective extraction of semiconducting SWNTs by wrapping and dispersion with conjugated polymers has been demonstrated to be effective, but the structural parameters of conjugated polymers that dictate selectivity are poorly understood. Here, we report nanotube dispersions with a poly(fluorene‐co‐pyridine) copolymer and its cationic methylated derivative, and show that electron‐deficient conjugated π‐systems bias the dispersion selectivity toward metallic SWNTs. Differentiation of semiconducting and metallic SWNT populations was carried out by a combination of UV/Vis‐NIR absorption spectroscopy, Raman spectroscopy, fluorescence spectroscopy, and electrical conductivity measurements. These results provide new insight into the rational design of conjugated polymers for the selective dispersion of metallic SWNTs.     

Stability of supershort single-walled carbon nanotubes

How short can single-walled carbon nanotubes (SWNTs) be? How stable are such supershort SWNTs (ss-SWNTs)? This work is the first to address these questions. On the basis of binding energy (E(B)), standard heats of formation , and strain energy (E(S)), we found that SWNTs with only one benzene ring in the axial direction, which we refer to as supershort SWNTs (ss-SWNTs), can be thermodynamically stable. On the basis of the data of E(B), , and E(S), the relative stabilities of ss-SWNTs, fullerenes, polycyclic aromatic hydrocarbons, and butadiyne are discussed. This study has laid a theoretical foundation for the possible synthesis of ss-SWNTs.     

Cellulose Nanocrystal-Assisted Dispersion of Luminescent Single-Walled Carbon Nanotubes for Layer-by-Layer Assembled Hybrid Thin Films

Highly stable single-walled carbon nanotube (SWNT) dispersions are obtained after ultrasonication in cellulose nanocrystal (CN) aqueous colloidal suspensions. Mild dispersion conditions were applied to preserve the SWNT length in order to facilitate the identification of hybrid objects. This led to a moderate dispersion of 24% of the SWNTs. Under these conditions, atomic force microscopy (AFM) and transmission electron microscopy (TEM) experiments succeeded in demonstrating the formation of hybrid particles in which CNs are aligned along the nanotube axis by a self-assembly process. These SWNT/CN dispersions are used to create multilayered thin films with the layer-by-layer method using polyallylamine hydrochloride as a polyelectrolyte. Homogeneous films from one to eight bilayers are obtained with an average bilayer thickness of 17 nm. The presence of SWNTs in each bilayer is attested to by characteristic Raman signals. It should be noted that these films exhibit a near-infrared luminescence signal due to isolated and well-separated nanotubes. Furthermore, scanning electron microscopy (SEM) suggests that the SWNT network is percolating through the film.