铁羰基化合物的研究(η5-C5H5)Fe(CO)2CH2COOR的合成

在我们实验室里采用环戊二烯基羰基铁的钠盐[(η⁵-C₅H₅)Fe(CO)₂]Na和氯代乙酸酯ClCH₂COOR(R=C₂H₅,C₃H₇,C₄H₉,C₅H₁₁)直接反应合成了铁羰基化合物(η⁵-C₅H₅)Fe(CO)₂CH₂COOR(Ⅰ).     

羧基淀粉接枝聚合物对重金属离子的吸附速率方程

以Ｃｅ＾４＋为引发剂，将丙烯腈接枝到高交联淀粉上，接枝产物再经皂化水解制得水不溶性羧基淀粉接枝聚合物（简称羧基淀粉）。研究了羧基淀粉吸附重金属离子的动力学行为。实验结果表明，羧基淀粉吸附速率快，吸附平衡时间短，吸附量随时间的变化规律遵从Ｑ／Ｑ∞＝ａｔ（１＋ａｔ）方程。     

二溴羧基偶氮胂测定铜

二溴羧基偶氮胂测定铜谢治民，欧阳则明，龙有前（湖南湘潭机电专科学校，４１１１０１）二溴羧基偶氮胂是测定稀土的高灵敏的新显色试剂￣［１］，我们用二溴羧基偶氮胂用于铜的试验，结果发现在ｐＨ８磷酸氢二钠－柠檬酸的缓冲介质中有良好的显色反应，配合物在波长５８...     

可见光促进二氧化碳参与的羧基化反应

二氧化碳是众所周知的温室气体, 也是重要的C1资源, 利用二氧化碳合成高附加值化合物具有重要意义. 其中, 羧酸类化合物广泛存在于天然产物、 药物、 日化品及工业原料中, 是一类非常重要的化合物. 因此, 利用二氧化碳合成羧酸类化合物是一个重要的研究方向; 另一方面, 由于二氧化碳反应活性低, 其转化通常需要高温等苛刻条件. 为解决该问题, 人们利用可见光作为能量来源, 可以在温和条件下实现二氧化碳的高效转化. 鉴于该方向近年来的蓬勃发展, 本文主要对可见光促进二氧化碳参与的羧基化反应进行介绍和总结, 按烯烃、 炔烃、 醛酮、 亚胺和(类)卤代物等重要的化工原料分类阐述, 并将各个反应的特点和机理将作为阐述的重点. 本文也对该领域的未来发展方向进行了展望, 希望为该领域的进一步发展提供参考.     

羧基丙烯酸树脂的合成研究及其粉末涂料的制备

用乳液聚合法合成了含羧基的丙烯酸树脂 ,考察了单体、酸值和引发剂用量对该树脂及其粉末涂料涂膜性能的影响。适宜树脂是 ;酸值 45～ 55mgKOH/g ,数均分子量 2 0 0 0～ 50 0 0 ,软化点90～ 1 1 0℃ ,玻璃化温度 50～ 60℃。     

NaBH4/MCl x 体系对液体端羧基氟橡胶的还原及还原机理

以液体端羧基氟橡胶(LTCFs)为原料, 硼氢化钠与金属氯化物(NaBH₄/MCl _x )为还原体系, 采用一锅法成功将LTCFs还原为液体端羟基氟橡胶(LTHFs). 研究了多种稀土金属氯化物(LaCl₃, CeCl₃, NdCl₃和SmCl₃）和过渡金属氯化物(MnCl₂, NiCl₂, CoCl₂和CuCl₂)对LTCFs还原效果的影响及变化规律. 采用傅里叶变换红外光谱(FTIR)、 核磁共振氢谱(¹H NMR)、 核磁共振氟谱(¹⁹F NMR)和化学滴定法对原料和产物的分子链结构和官能团含量进行了表征. 结果表明, 稀土金属MCl _x 还原体系对LTCFs的还原效果均高于过渡金属MCl _x 还原体系, LTCFs中的—C=C—和—COOH均可以被还原为—C—C—和—OH, 其中NaBH₄/SmCl₃还原体系还原效率最高, 达到92%. 机理研究表明, NaBH₄/MCl _x 对—COOH的还原性能与MCl _x 中金属阳离子和羰基氧间的结合力有关, 结合力越大越有利于—COOH的还原.     

双羧基冠醚玻璃空心柱的研制及分离机理的研究

提出一种制备双羧基冠醚玻璃空心柱的新方法,对其色谱特性研究表明:用该法研制的双羧基冠醚空心柱色谱性能良好,对某些极性位置异构体的分离有特殊的选择性,还探讨了反应机理及影响分离的各种因素。     

羧基腈化法合成腈类化合物的研究

多年来,腈类化合物的合成一直是化学界探讨的课题。以往,腈类化合物多是从金属氰化物制备而来,这一方法很不安全,因此急待改     

1D Mn0.2Cd0.8S纳米棒/2D Ti3C2纳米片肖特基异质结的构建及光催化产氢性能研究

Sustainable photocatalytic H₂ evolution has attracted extensive attention in recent years because it can address both energy shortage and environmental pollution issues. In particular, metal sulfide solid-solution photocatalysts have been widely applied in photocatalytic hydrogen generation owing to their excellent light harvesting properties, narrow enough band gap, and suitable redox potentials of conduction and valance bands. However, it is still challenging to develop low-cost and high-efficiency sulfide solid-solution photocatalysts for practical photocatalytic hydrogen evolution. Recently, 1D Mn_xCd_1-xS nanostructures have shown superior light absorption, charge separation, and H₂-evolution activity owing to their shortened diffusion pathway of carriers and high length-to-diameter ratios. Thus, 1D Mn_xCd_1-xS nanostructures have been applied in photocatalytic H₂ evolution. However, a single Mn_xCd_1-xS photocatalyst still has some disadvantages for photocatalytic H₂ evolution, such as the rapid recombination of photogenerated electron-hole pairs and low quantum efficiency. Herein, to further boost the separation of photogenerated charge carriers and H₂-evolution kinetics, an in situ solvothermal method was used to synthesize the 1D/2D Schottky-based heterojunctions between the Mn_0.2Cd_0.8S nanorods (MCS NRs) and Ti₃C₂ MXene nanosheets (NSs). Furthermore, various characterization methods have been used to investigate the crucial roles and underlying mechanisms of metallic Ti₃C₂ MXene NSs in boosting the photocatalytic H₂ evolution over the Mn_0.2Cd_0.8S nanorods. X-ray Diffraction (XRD), Transmission Electron Microscope (TEM), High Resolution Transmission Electron Microscopy (HRTEM), element mapping images, and X-ray Photoelectron Spectroscopy (XPS) results clearly demonstrate that hybrid low-cost Schottky-based heterojunctions have been successfully constructed for practical applications in photocatalytic H₂ evolution. Additionally, the photocatalytic hydrogen evolution reaction (HER) was also carried out in a mixed solution of Na₂SO₃ and Na₂S using as the sacrificial agents. The highest hydrogen evolution rate of the optimized 1D/2D Schottky-based heterojunction is 15.73 mmol·g^-1·h^-1, which is 6.72 times higher than that of pure MCS NRs (2.34 mmol·g^-1·h^-1). An apparent quantum efficiency of 19.6% was achieved at 420 nm. The stability measurements of the binary photocatalysts confirmed their excellent photocatalytic stability for practical applications. More interestingly, the UV-Vis diffuse reflection spectra, photoluminescence (PL) spectrum, transient photocurrent responses, and Electrochemical Impedance Spectroscopy (EIS) Nyquist plots clearly confirmed the promoted charge separation between the MCS NRs and Ti₃C₂ MXene NSs. The linear sweep voltammetry also showed that the loading of MXene cocatalysts could greatly decrease the overpotential of pure MCS NRs, suggesting that the 2D Ti₃C₂ NSs could act as an electronic conductive bridge to improve the H₂-evolution kinetics. In summary, these results show that the 2D/1D hybrid Schottky-based heterojunctions between metallic Ti₃C₂ MXene NSs and MCS NRs can not only improve the separation of photogenerated electrons and holes but also decrease the H₂-evolution overpotential, thus resulting in significantly enhanced photocatalytic H₂ generation. We believe that this study will inspire new ideas for constructing low-cost Schottky-based heterojunctions for practical applications in photocatalytic H₂ evolution.      

Ni2P-NiS双助剂促进g-C3N4光催化产氢动力学

本文通过简单的一步水热法得到Ni₂P-NiS双助催化剂,之后采用溶剂蒸发法将Ni₂P-NiS与g-C₃N₄纳米片结合构建获得无贵金属的Ni₂P-NiS/g-C₃N₄异质结。研究结果表明,优化后的复合材料具有良好的光催化产氢活性,其产氢速率最高可到6892.7 μmol·g^-1·h^-1,分别为g-C₃N₄ (150 μmol·g^-1·h^-1)、15%NiS/g-C₃N₄ (914.5 μmol·g^-1·h^-1)和15%Ni₂P/g-C₃N₄ (1565.9 μmol·g^-1·h^-1)的46.1、7.5和4.4倍。这主要归因于Ni₂P-NiS相比Ni₂P和NiS单体具有更好的载流子转移能力,其与g-C₃N₄形成的肖特基势垒能有效促进光生载流子在二者界面上的分离,同时Ni₂P-NiS能进一步降低析氢过电势,进而显著增强了表面析氢反应动力学。本研究为开发稳定、高效的非贵金属产氢助剂提供了实验基础。     

In2O3修饰三维纳米花MoSx构建S型异质结用于高效光催化产氢

形貌控制和异质结构建是提升光催化剂性能的有效策略。本文采用In₂O₃修饰三维纳米花MoS_x并构建S型异质结,为电子的传输提供了特殊的转移途径。通过合理调控In₂O₃的负载量,MoS_x/In₂O₃的最佳产氢速率能够达到6704.2 μmol∙g⁻¹∙h⁻¹,是纯MoS_x的1.8倍。采用荧光光谱和电化学测试证实复合材料中内部电子和空穴对的分离效率得到了有效的提升,并利用紫外漫反射测试和羟基自由基实验推测了析氢机理。     

碳包覆Pd/TiO2光催化产氢协同胺类选择性氧化合成亚胺(英文)

负载型金属纳米催化剂由于其优异的光催化性能,被广泛应用于光催化产氢协同胺类氧化偶联合成高附加值亚胺体系。但在反应过程中,金属表面对H原子和亚胺表现出较强的吸附能力,导致了亚胺易于发生自氢化反应而生成仲胺,显著降低了亚胺的选择性。在本文中,我们证实了在Pd/Ti O₂表面构建超薄碳层(Pd/Ti O₂@C)是一种解决上述问题的有效策略。在Pd/Ti O₂表面构筑的超薄碳层可以有效调控H原子和亚胺在其表面的吸附行为,避免了光催化氧化偶联过程中亚胺的自氢化。因此,Pd/Ti O₂@C光催化剂在光催化产氢协同胺类选择性氧化合成亚胺体系中展现出优异的亚胺选择性。本研究提供了一种便捷有效的策略推动负载型金属纳米催化剂在光催化产氢协同合成高附加值产物体系中的应用。     

微波辅助快速制备2D/1D ZnIn2S4/TiO2 S型异质结及其光催化制氢性能

The threat and global concern of energy crises have significantly increased over the last two decades. Because solar light and water are abundant on earth, photocatalytic hydrogen evolution through water splitting has been considered as a promising route to produce green energy. Therefore, semiconductor photocatalysts play a key role in transforming sunlight and water to hydrogen energy. To date, various photocatalysts have been studied. Among them, TiO₂ has been extensively investigated because of its non-toxicity, high chemical stability, controllable morphology, and high photocatalytic activity. In particular, 1D TiO₂ nanofibers (NFs) have attracted increasing attention as effective photocatalysts because of their unique 1D electron transfer pathway, high adsorption capacity, and high photoinduced electron–hole pair transfer capability. However, TiO₂ NFs are considered as an inefficient photocatalyst for the hydrogen evolution reaction (HER) because of their disadvantages such as a large band gap (~3.2 eV) and fast recombination of photoinduced electron–hole pairs. Therefore, the development of a high-performance TiO₂ NF photocatalyst is required for efficient solar light conversion. In recent years, several strategies have been explored to improve the photocatalytic activity of TiO₂ NFs, including coupling with narrow-bandgap semiconductors (such as ZnIn₂S₄). Recently, microwave (MW)-assisted synthesis has been considered as an important strategy for the preparation of photocatalyst semiconductors because of its low cost, environment-friendliness, simplicity, and high reaction rate. Herein, to overcome the above-mentioned limiting properties of TiO₂ NFs, we report a 2D/1D ZnIn₂S₄/TiO₂ S-scheme heterojunction synthesized through a microwave (MW)-assisted process. Herein, the 2D/1D ZnIn₂S₄/TiO₂ S-scheme heterojunction was constructed rapidly by using in situ 2D ZnIn₂S₄nanosheets decorated on 1D TiO₂ NFs. The loading of ZnIn₂S₄ nanoplates on the TiO₂ NFs could be easily controlled by adjusting the molar ratios of ZnIn₂S₄ precursors to TiO₂ NFs. The photocatalytic activity of the as-prepared samples for water splitting under simulated solar light irradiation was assessed. The experimental results showed that the photocatalytic performance of the ZnIn₂S₄/TiO₂ composites was significantly improved, and the obtained ZnIn₂S₄/TiO₂ composites showed increased optical absorption. Under optimal conditions, the highest HER rate of the ZT-0.5 (molar ratio of ZnIn₂S₄/TiO₂= 0.5) sample was 8774 μmol·g^-1·h^-1, which is considerably higher than those of pure TiO₂ NFs (3312 μmol·g^-1·h^-1) and ZnIn₂S₄nanoplates (3114 μmol·g^-1·h^-1) by factors of 2.7 and 2.8, respectively. Based on the experimental data and Mott-Schottky analysis, a possible mechanism for the formation of the S-scheme heterojunction between ZnIn₂S₄ and TiO₂ was proposed to interpret the enhanced HER activity of the ZnIn₂S₄/TiO₂heterojunctionphotocatalysts.      

反蛋白石结构ZnO@PDA用于增强光催化产H2O2性能

利用太阳能驱动生产高能量密度的H₂O₂太阳能燃料引起了广泛关注,但目前光催化剂缓慢的动力学限制了其实际应用。本文制备一种聚多巴胺(PDA)改性的反蛋白石结构ZnO(ZnO@PDA)光催化剂,用于可持续性的光催化产H₂O₂。由于电子的转移,因此当PDA与ZnO接触后,会在界面处形成一个从PDA指向ZnO的内建电场。在内建电场和能带弯曲的驱动下,ZnO导带中的光生电子与PDA最高占据分子轨道(HOMO)中的空穴复合,符合梯型异质结的电荷转移和分离途径。这种独特的梯型异质结确保了有效的电子或空穴的分离并且留存下具有强氧化还原能力的光生载流子。此外,与纯ZnO相比,反蛋白石结构的ZnO@PDA具有更强的光吸收能力。实验表明,归因于光吸收能力的提高,光生载流子的有效分离和强氧化还原能力,负载0.03% (原子分数) PDA的ZnO样品具有最佳的产H₂O₂性能(1011.4 μmol·L^-1·h^-1),分别是纯ZnO和PDA的4.4和8.9倍。     

空心NiCo2S4纳米球助催化剂担载ZnIn2S4纳米片用于可见光催化制氢

纳米片与空心球上之间的合理界面调控是开发高效太阳能制氢光催化剂的潜在策略。在各类光催化材料中,金属硫化物由于具有相对较窄的带隙和优越的可见光响应能力而被广泛研究。ZnIn₂S₄是一种层状的三元过渡金属半导体光催化剂,其带隙可控(约2.4 eV)。在众多金属硫化物光催化剂中,ZnIn₂S₄引起了广泛兴趣。然而,单纯的ZnIn₂S₄光催化活性仍然相对较差,主要是因为光生载流子的复合率较高、迁移速率较慢。在半导体光催化剂上负载助催化剂是提升光催化剂性能的一种有效方法,因为它不仅可以加速光生电子和空穴的分离,而且还可以降低质子还原反应的活化能。作为一种三元过渡金属硫化物,NiCo₂S₄表现出较高的导电性、较低的电负性、丰富的氧化还原特性以及优越的电催化活性。这些特性表明,NiCo₂S₄可以作为光催化制氢的助催化剂,以加速电荷分离和转移。此外,NiCo₂S₄和ZnIn₂S₄都属于三元尖晶石的晶体结构,这可能有助于构建具有紧密界面接触的NiCo₂S₄/ZnIn₂S₄复合物,从而提高光催化性能。本文中,将超薄ZnIn₂S₄纳米片原位生长到非贵金属助催化剂NiCo₂S₄空心球上,形成具有强耦合界面和可见光吸收的NiCo₂S₄@ZnIn₂S₄分级空心异质结构光催化剂。最优NiCo₂S₄@ZnIn₂S₄复合样品(NiCo₂S₄含量：ca. 3.1%)的析氢速率高达78 μmol·h^-1,约是纳米片组装ZnIn₂S₄光催化剂析氢速率的9倍、约是1% (w, 质量分数)Pt/ZnIn₂S₄样品析氢速率的3倍。此外,该复合光催化剂在反应中表现出良好的稳定性。荧光和电化学测试结果表明,NiCo₂S₄空心球是一种有效的助催化剂,可促进光生载流子的分离和传输,并降低析氢反应的活化能。最后,提出了NiCo₂S₄@ZnIn₂S₄光催化析氢的可能反应机理。在NiCo₂S₄@ZnIn₂S₄复合光催化剂中,具有高导电性的NiCo₂S₄助催化剂可快速接受ZnIn₂S₄上的光生电子,用以还原质子生成氢气,而电子牺牲剂TEOA捕获光生空穴,进而完成光催化氧化还原循环。该研究有望为基于纳米片为次级结构的分级空心异质结光催化剂的设计合成及其光催化制氢研究提供一定的指导。     

钾对CuSO4/TiO2脱硝催化剂的失活效应(英文)

为了减少碳排放，在世界各地兴建了越来越多的生物质电厂。钾元素是生物质电厂烟气中的一种典型元素并且可以引起脱硝催化剂的失活。具有优异抗SO₂性能的CuSO₄/TiO₂催化剂被认为是一种有前景的非钒基脱硝催化剂。但是，钾对CuSO₄/TiO₂催化剂的影响仍不清楚。本文研究了钾对CuSO₄/TiO₂催化剂的影响并且与商业V₂O₅-WO₃/TiO₂ (VWTi)催化剂作了比较，采用多种表征方法对催化剂样品进行了表征。钾可以引起CuSO₄/TiO₂和VWTi催化剂的失活，但是CuSO₄/TiO₂催化剂对钾的抵抗能力明显高于商业VWTi催化剂。钾会与CuSO₄/TiO₂催化剂中的CuSO₄发生反应生成CuO和...     

多组分纳米纤维体系中载流子动力学的有效级联调制及其高效光催化产氢性能研究（英文）

利用半导体作为催化剂,将水光催化还原为H₂,为缓解全球能源危机以及环境污染问题提供了一种经济环保的途径。优化调控载流子动力学行为对提高半导体光催化分解水还原为绿色燃料-H₂的活性具有十分重要的意义。目前,基于半导体异质结效应或局域表面等离激元共振的敏化过程来设计和调控半导体基异质结构体系已成为调控载流子动力学行为的一种经典策略。然而,通过精细设计异质结构,合理耦合上述敏化过程,实现载流子动力学的级联调制,从而获得高效的光催化产H₂活性仍然任重道远。在本文中,我们通过原位氧化(g-C₃N₄的剥离和Ag₂S)和还原(Ag)反应,将等离激元Ag纳米颗粒(NPs)和两种不同的半导体Ag₂SNPs和g-C₃N₄纳米片(NSs)组装在电纺TiO₂纳米纤维(NFs)中,形成了一种新型四元异质组分纳米纤维(HNFs)体系。结合时间分辨光致发光光谱,3D时域有限差分模拟以及对照实验,我们...     

非贵金属助剂Ni2P修饰类石墨碳氮化物光催化剂增强可见光光催化产氢性能

Energy crisis has become a serious global issue due to the increasing depletion of fossil fuels; therefore, it is crucial to develop environmentally friendly and renewable energy resources, such as hydrogen (H₂), to replace fossil fuels. From this viewpoint, photocatalytic H₂ production is considered as one of the most promising technologies. Noble metal platinum (Pt) can be applied as an efficient cocatalyst for improving the H₂ production performance of photocatalytic systems; however, its high cost limits its further application. Thus, the development of novel, high-activity, and low-cost cocatalysts for replacing noble metal cocatalysts is of great significance for use in photocatalytic H₂ evolution techniques. Herein, we successfully synthesized a Ni₂P/graphite-like carbonitride photocatalyst (Ni₂P/CN) using a conjugated polymer (SCN)_n as precursor for enhanced photocatalytic H₂ production under visible light illumination. Various characterization techniques, including optical and photoelectronic chemical tests, were used to investigate the structural composition, morphology, and light adsorption ability of these materials. X-ray diffraction, Fourier transform infrared spectroscopy (FT-IR), and X-ray photoelectron spectroscopy results showed that Ni₂P/CN nanocomposites with good crystal structure were obtained. Scanning electron microscopy and transmission electron microscopy results revealed that the Ni₂P/CN samples had a typical two-dimensional layered structure, and the Ni₂P nanoparticles were uniformly loaded on the surface of the CN to form a non-noble metal promoter. UV-Vis diffuse reflectance spectra results demonstrated that the loading of Ni₂P nanoparticles effectively enhances the adsorption capacity of CN to visible light. Photoluminescence spectroscopy and photocurrent (PL) results suggested that Ni₂P loading to CN is beneficial for promoting the migration and separation efficiency of photogenerated carriers. Photocatalytic H₂ production was conducted under visible light irradiation with triethanolamine as a sacrificial agent. The results suggest that the Ni₂P/CN composite photocatalysts exhibit excellent photocatalytic reduction performance. In particular, the H₂ evolution rate of the optimal Ni₂P/CN nanocomposite is 623.77 μmol·h^-1·g^-1, which is higher than that of CN modified by noble metal Pt, i.e., 524.63 μmol·h^-1·g^-1. In conclusion, Ni₂P nanoparticles are homogeneously attached to the surface of CN, and a strong interfacial effect exists between them, thereby forming an electron transfer tunnel that greatly inhibits the recombination of photoinduced carriers and promotes the migration of electrons from CN to Ni₂P. In addition, a possible photocatalytic mechanism is proposed based on the experiments and characterizations. This work has profound significance for developing non-noble metal cocatalysts for the substitution of noble metal cocatalysts for high-efficiency photocatalytic H₂ evolution.