Determination of bromide in suspended particulate matter by high-performance liquid chromatography with u.v. detection

High-performance liquid chromatography on a Zipax SAX column with u.v. detection at 200 nm gives precise results for bromide. Chloride, bromate, nitrate, nitrate, iodide, thiocyanate and various cations do not interfere; prior treatment with activated charcoal removes interfering organic compounds. Calibration graphs are linear over the range 0–50 mg 1 ^?1 bromide in aqueous extracts of the particulates; the limit of detection is 10 ng of bromide. The relative standard deviations at the 0.5 and 1.0 mg 1^?1 levels are 2.3 and 1.0%, respectively.     

Determination of mutagenic 3-nitrobenzanthrone in diesel exhaust particulate matter by three-dimensional high-performance liquid chromatography

Mutagenic 3-nitrobenzanthrone was determined in diesel exhaust particulate matter by three-dimensional high-performance liquid chromatography. Nitrophenylethyl, C18 and pyrenylethyl stationary phases were used as the first, second and third dimensions, respectively. Methanol was used as a mobile phase for the first and second dimensions, and dichloromethane was used for the third. Each column was coupled by a 6-port valve with a concentrator column. Effluent from the third dimensional column was detected by a photodiode array detector. The calibration graph showed good linearity in the range of 1-1000 ng ml(-1), and the detection limit (S/N = 3) was 1 ng ml(-1) 3-Nitrobenzanthrone could be detected within 45 min without the requirement of a clean-up procedure. 3-Nitrobenzanthrone in diesel exhaust particulate matter was detected in the range of 27-56 pg mg(-1) extract (n = 3).     

Determination of atmospheric nitrobenzanthrones by high-performance liquid chromatography with chemiluminescence detection.

A method using high-performance liquid chromatography with chemiluminescence detection was developed for analyzing mutagenic nitrobenzanthrone (NBA) isomers in airborne particulates. The method was a modification of our previously described method for analyzing nitropolycyclic aromatic hydrocarbons (NPAHs). The pretreatment and reducing conditions for 1-, 2-, 3- and 10-NBAs were the same as those for NPAHs. In order to separate these NBA isomers, we used a polymeric-type ODS column (Cosmosil 5C-18MS); a mixture of 40% acetonitrile and 60% 10 mM imidazole-HClO4 buffer was employed as the mobile phase at a flow rate of 1 mL/min. The isomers of 1-, 2-, 3- and 10-NBA were determined in chemiluminescence with linear calibration graphs from 0.1 to 4 pmol, from 200 to 4000 pmol, from 1 to 50 pmol and from 10 to 400 pmol, respectively. The detection limits (S/N = 3) of 1-, 2-, 3- and 10-NBA isomers were 0.02 pmol, 35 pmol, 0.3 pmol and 3 pmol, respectively. The method was used to analyze airborne particulates at a heavy traffic site in Kanazawa. 2- and 3-NBAs were detected in the extracts of the particulates, while 1-NBA and 10-NBA were not detected. The atmospheric concentrations of 2- and 3-NBAs were 1.83 pmol/m3 and 24.7 fmol/m3, respectively.     

Determination of polyamines by high-performance liquid chromatography with chemiluminescence detection

A method was developed for the determination of polyamines (PA) by high-performance liquid chromatography with chemiluminescence detection. It is based on the unsaturated complex of PA with Cu(II) which had a strong catalytic effect on the luminol-H₂O₂ chemiluminescence reaction. The separation of PA was carried out on a reveres phase C18 column using methanol/water (25/75, v/v) as a mobile phase. The method was applied to the analysis of putrescine and the total amount of spermine and spermidine in apple leaves and strawberry fruit. The results indicated that the method is practical and useful.     

Determination of polyphenols by high-performance liquid chromatography with inhibited chemiluminescence detection.

A chemiluminescence reaction detector was developed for the detection of polyphenols separated by HPLC based on the inhibition of chemiluminescence from the luminol-potassium hexacyanoferrate(III) reaction by polyphenols. The separation was carried out on a RP-C18 column at 37 degrees C by using stepwise gradient elutions. The detection limits are in the range of 6.8 x 10(-7)-2.0 x 10(-9) g/ml for catechol, protocatechuic acid, chlorogenic acid, rutin, resorcinol, hydroquinone and p-tert.butylpyrocatechol. The method is sensitive, selective, fast and simple. It has been successfully applied to the determination of chlorogenic acid and rutin in real tobacco samples.     

Determination of nadolol in serum by high-performance liquid chromatography with fluorimetric detection.

A sensitive high-performance liquid chromatographic method for a routine assay of nadolol in serum is described. Serum samples spiked with atenolol (internal standard) were extracted with diethyl ether. After centrifugation, the organic layer was evaporated to dryness. The residue was redissolved in the mobile phase and injected onto an octadecyl silica column (150 mm x 4.6 mm I.D.). The mobile phase was 0.05 M ammonium acetate (pH 4.5)-acetonitrile (85:15, v/v). Fluorometric detection (excitation 230 nm, emission 300 nm) was used. The minimum detectable level of nadolol in serum was 1 ng/ml.     

Determination of tetracycline antibiotics by reversed-phase high-performance liquid chromatography with fluorescence detection.

A highly sensitive method for the determination of tetracycline antibiotics (TCs) using reversed-phase high-performance liquid chromatography with fluorescence detection is presented. This method was based on the use of disodium ethylenediaminetetraacetate (EDTA) and calcium chloride as fluorescence-increasing reagents in the mobile phase. The concentrations of each reagent in the mobile phase greatly influenced the fluorescence intensity of TCs. When the concentration of EDTA and calcium chloride were 25 and 35 mM, respectively, and the pH of the mobile phase was 6.5, the maximum fluorescence intensity was obtained. The column temperature hardly influenced the fluorescence intensity. At 3.75 ng of TCs injected, the precision (relative standard deviation) ranged from 1.12 to 2.20%. In the range 0.075-37.5 ng for tetracycline and oxytetracycline and 0.225-37.5 ng for chlortetracycline, a linear response was observed. The detection limits of this method were 49-190 pg for three different TCs. The proposed method was applied to the determination of one of the TCs in pharmaceuticals by the internal standard method using other TCs as internal standards and was also applied to determination of TCs added to fish tissue.     

Determination of orbifloxacin in rabbit plasma by high-performance liquid chromatography with fluorescence detection.

A simple and sensitive high-performance liquid chromatography method is developed for the determination of orbifloxacin (ORB) in rabbit plasma. Sample preparations are carried out by adding phosphate buffer (pH 7.4, 0.1 M) and extracting with trichloromethane. ORB and the internal standard, norfloxacin (NOR), are separated on a reversed-phase column using an aqueous phosphate buffer-acetonitrile (80:20, v/v) mobile phase. The concentrations of ORB and NOR eluting from the column with retention times of 2.16 and 3.09 min, respectively, are monitored by fluorescence detection at 338 (excitation) and 425 nm (emission). The method is shown to be linear from 4 to 1500 ng/mL (regression coefficient r2 = 0.999). The quantitation and detection limits are 4 and 9 ng/mL, respectively. Mean recovery is determined as 92% by the analysis of plasma standards containing 150, 750, and 1500 ng/mL. Inter- and intra-assay precisions were 4 and 3%, respectively.     

Determination of midodrine in human plasma by high-performance liquid chromatography with fluorescence detection.

A simple and sensitive fluorometric high-performance liquid chromatographic method was developed for the determination of midodrine in human plasma. After liquid-liquid extraction from plasma, the drug and 2-phenylglycinol (internal standard) were convened into the corresponding fluorescent derivatives by reaction with 3,4-dihydro-6,7-dimethoxy-4-methyl-3-oxoquinoxaline-2-carbonyl chloride, a fluorescence derivatization reagent for amines. The derivatives were separated within 30 min on a reversed-phase column using isocratic elution with acetonitrile-methanol-water (10:30:60, v/v) and were detected spectrofluorometrically at 485 nm with excitation at 400 nm. The detection limit for midodrine was 0.3 pmol (76 pg) per mL plasma at a signal-to-noise ratio of 3.     

Determination of acetaldehyde in fuel ethanol by high-performance liquid chromatography with electrochemical detection.

The cyclic voltammetric behavior of acetaldehyde and the derivatized product with 2,4-dinitrophenylhydrazine (DNPHi) has been studied at a glassy carbon electrode. This study was used to optimize the best experimental conditions for its determination by high-performance liquid chromatographic (HPLC) separation coupled with electrochemical detection. The acetaldehyde-2,4-dinitrophenylhydrazone (ADNPH) was eluted and separated by a reversed-phase column, C18, under isocratic conditions with the mobile phase containing a binary mixture of methanol/LiCl(aq) at a concentration of 1.0 x 10(-3) M (80:20 v/v) and a flow rate of 1.0 mL min(-1). The optimum condition for the electrochemical detection of ADNPH was +1.0 V vs. Ag/AgCl as a reference electrode. The proposed method was simple, rapid (analysis time 7 min) and sensitive (detection limit 3.80 microg L(-1)) at a signal-to-noise ratio of 3:1. It was also highly selective and reproducible [standard deviation 8.2% +/- 0.36 (n = 5)]. The analytical curve of ADNPH was linear over the range of 3-300 mg L(-1) per injection (20 microL), and the analytical recovery was > 99%.     

Determination of diclofenac in plasma by high-performance liquid chromatography with electrochemical detection

A reversed-phase high-performance liquid chromatographic method with electrochemical detection for the quantitative determination of diclofenac potassium in plasma was developed. Naproxen was used as the internal standard. The drug and internal standard were isolated from plasma by extraction with dichloromethane and 2 M hydrochloric acid. Chromatographic separation was performed on a C18 column with methanol-water (68:32, v/v) adjusted to pH 3.2 with phosphoric acid as mobile phase. The oxidation potential for detection was established by constructing a voltammogram for diclofenac. The quantification limit for diclofenac in plasma was 5 ng mL(-1). Linearity of the method was confirmed in the range 5-2000 ng mL(-1), correlation coefficient 0.9998. Within-day relative standard deviations (RSDs) ranged from 0.66 to 14.00% and between-day RSDs from 0.59 to 15.78%. The method was successfully applied for the determination of pharmacokinetic parameters after ingestion of a 50 mg dose of diclofenac. Studies were performed on 18 healthy volunteers of both sexes.     

Determination of tianeptine in tablets by high-performance liquid chromatography with fluorescence detection

A sensitive and selective high-performance liquid chromatographic method has been developed for the determination of tianeptine (Tia) in tablets. The method is based on derivatization of Tia with 4-chloro-7-nitrobenzofurazan (NBD-CI). A mobile phase consisting of acetonitrile-10 mM orthophosphoric acid (pH 2.5; 77 + 23) was used at a flow rate of 1 mL/min on a C18 column. The Tia-NBD derivative was monitored using a fluorescence detector, with emission set at 520 nm and excitation at 458 nm. Gabapentin was selected as an internal standard. Linear calibration graphs were obtained in the concentration range of 45-300 ng/mL. The lower limit of detection (LOD) was 10 ng/mL at a signal-to-noise ratio of 4. The lower limit of quantitation (LOQ) was 45 ng/mL. The relative standard values for intra- and interday precision were <0.46 and <0.57%, respectively. The recovery of the drug samples ranged between 98.89 and 99.85%. No chromatographic interference from the tablet excipients was found. The proposed method was validated in terms of precision, robustness, recovery, LOD, and LOQ. All the validation parameters were within the acceptance range. The proposed method was applied for the determination of Tia in commercially available tablets. The results were compared with those obtained by an ultraviolet spectrophotometric method using t- and F-tests.     

Determination of phenylethanolamine N-methyltransferase by high-performance liquid chromatography with fluorescence detection

A highly sensitive assay method for phenylethanolamine N-methyltransferase in rat adrenal medulla and brain is described which employs high-performance liquid chromatography with fluorescence detection. Epinephrine formed enzymatically from the substrate norepinephrine and isoproterenol (internal standard), after chromatography on a small cartridge of a cation exchanger, Toyopak SP, are converted into the corresponding fluorescent compounds by reaction with 1,2-diphenylethylenediamine, a selective fluorescence derivatization reagent for catechol compounds. The derivatives are separated by reversed-phase chromatography on TSK gel ODS-120T. The detection limit for epinephrine formed enzymatically is 0.66 pmol per assay tube.     

Determination of bestatin in serum by high-performance liquid chromatography with fluorescence detection

A simple method for the determination of bestatin and its major metabolite in man, p-hydroxybestatin, in human serum was investigated; the method employs high-performance liquid chromatography with fluorescence detection. Bestatin and p-hydroxybestatin are oxidized to phenylacetaldehyde and p-hydroxyphenylacetaldehyde, respectively, with periodate, which are then converted into fluorescent compounds with 4,5-dimethoxy-1,2-diaminobenzene. The compounds are separated by reversed-phase chromatography on LiChrosorb RP-18. The detection limits of bestatin and p-hydroxybestatin are 0.2 and 0.4 microgram/ml serum, respectively. This method permits the precise determination of bestatin in serum (20 microliter) from patients administered bestatin. p-Hydroxybestatin in serum can not be measured by this method because of its low concentration (less than the detection limit).