Metal ion-catalyzed Diels-Alder and hydride transfer reactions. Catalysis of metal ions in the electron-transfer step

Rates of Diels-Alder cycloaddition of anthracenes with p-benzoquinone and its derivatives as well as rates of hydride-transfer reactions from 10-methyl-9,10-dihydroacridine to the same series of p-benzoquinones are accelerated significantly in the presence of metal ions in acetonitrile. An extensive comparison of the catalytic effects of metal ions in electron transfer from one-electron reductants (cobalt tetraphenylporphyrin and decamethylferrocene) to p-benzoquinones with those in the Diels-Alder reactions of the quinones as well as the hydride-transfer reactions has revealed that the catalysis of metal ions in each case is ascribed to the 1:1 and 1:2 complexes formed between the corresponding semiquinone radical anions and metal ions. The transient absorption and ESR spectra of the semiquinone radical anion-metal ion complexes are detected directly in the electron-transfer reduction of p-benzoquinone derivatives in the presence of metal ions. The catalytic reactivities of a variety of metal ions in each reaction are well correlated with the energy splitting values of pi(g) levels because of the complex formation between O(2)(.-) and M(n+), which are derived from the g(zz) values of the ESR spectra of the O(2)(.-)-M(n+) complex.     

Chemical oscillations in the metal ion-catalyzed bromate-4-aminophenol reaction

Temporal oscillations of the bromate-4-aminophenol system have been studied in the presence of four different catalysts:tris(1,10-phenanthroline)iron(II) sulfate(ferroin),Ce(III),Mn(II),and Fe(II).Transient temporal oscillations were observed in the four catalyzed systems when the reactions were conducted in a stirred batch reactor.The induction time was prolonged by the presence of ferroin,but it was shortened in the Ce(III)-and Mn(II)-catalyzed systems.On the other hand,the number of peaks was significantly decreased in the presence of ferroin.The development of oscillatory behaviour was found to be more sensitive to the ratio of bromate and 4-aminophenol concentration than to their absolute concentrations.The reaction rates of 4-aminophenol with Ce(IV) and 4-aminophenol with ferritin were measured directly by spectroscopic methods in a sulfuric acid medium.     

Catalysis of the ethanolysis of aryl methyl phenyl phosphinate esters by alkali metal ions: transition state structures for uncatalyzed and metal ion-catalyzed reactions

This paper reports on a spectrophotometric kinetic study of the effects of the alkali metal ions Li+ and K+ on the ethanolysis of the aryl methyl phenyl phosphinate esters 3a-f in anhydrous ethanol at 25 degrees C. Rate data obtained in the absence and presence of complexing agents afford the second-order rate constants for the reaction of free ethoxide (k(EtO-)) and metal ion-ethoxide ion pairs (k(MOEt)). The sequence k(EtO-) < k(MOEt) is established for all the substrates, contrary to the generally observed reactivity order in nucleophilic substitution processes. The quantities deltaG(ip), deltaG(ts) and DeltaG(cat), which quantify the observed alkali metal ion effect in terms of transition state stabilization through chelation of the metal ion, give the order deltaG(ts) > deltaG(ip) for Li+ and K+. Hammett plots show significantly better correlation of rates with sigma and sigma(o) substituent constants than with sigma-, yielding moderately large rho(rho(o)) values that are consistent with a stepwise mechanism in which formation of a pentacoordinate (phosphorane) intermediate is the rate-limiting step. The range of the values of the selectivity parameter, rho(n) (= rho]/rho(eq)), 1.3-1.6, obtained for the uncatalyzed and alkali metal ion catalyzed reactions indicates that there is no significant perturbation of the transition state (TS) structure upon chelation of the metal ions. This finding is relevant to the mechanism of enzymatic phosphoryl transfer involving metal ion co-factors. The present results enable one to compare structural effects for nucleophilic reactions of several series of organophosphorus substrates. It is shown that the order of reactivity of the substrates: 4-nitrophenyl dimethyl phosphinate (2) > 3a > 4-nitrophenyl diphenyl phosphinate (1) is determined mainly by the steric effects of the alkyl/aryl substituents around the central P atom in the TS of the reaction.     

Metal ion-catalyzed cycloaddition vs hydride transfer reactions of NADH analogues with p-benzoquinones

1-Benzyl-4-tert-butyl-1,4-dihydronicotinamide (t-BuBNAH) reacts efficiently with p-benzoquinone (Q) to yield a [2+3] cycloadduct (1) in the presence of Sc(OTf)(3) (OTf = OSO(2)CF(3)) in deaerated acetonitrile (MeCN) at room temperature, while no reaction occurs in the absence of Sc(3+). The crystal structure of 1 has been determined by the X-ray crystal analysis. When t-BuBNAH is replaced by 1-benzyl-1,4-dihydronicotinamide (BNAH), the Sc(3+)-catalyzed cycloaddition reaction of BNAH with Q also occurs to yield the [2+3] cycloadduct. Sc(3+) forms 1:4 complexes with t-BuBNAH and BNAH in MeCN, whereas there is no interaction between Sc(3+) and Q. The observed second-order rate constant (k(obs)) shows a first-order dependence on [Sc(3+)] at low concentrations and a second-order dependence at higher concentrations. The first-order and the second-order dependence of the rate constant (k(et)) on [Sc(3+)] was also observed for the Sc(3+)-promoted electron transfer from CoTPP (TPP = tetraphenylporphyrin dianion) to Q. Such dependence of k(et) on [Sc(3+)] is ascribed to formation of 1:1 and 1:2 complexes between Q(*)(-) and Sc(3+) at the low and high concentrations of Sc(3+), respectively, which results in acceleration of the rate of electron transfer. The formation constants for the 1:2 complex (K(2)) between the radical anions of a series of p-benzoquinone derivatives (X-Q(*)(-)) and Sc(3+) are determined from the dependence of k(et) on [Sc(3+)]. The K(2) values agree well with those determined from the dependence of k(obs) on [Sc(3+)] for the Sc(3+)-catalyzed addition reaction of t-BuBNAH and BNAH with X-Q. Such an agreement together with the absence of the deuterium kinetic isotope effects indicates that the addition proceeds via the Sc(3+)-promoted electron transfer from t-BuBNAH and BNAH to Q. When Sc(OTf)(3) is replaced by weaker Lewis acids such as Lu(OTf)(3), Y(OTf)(3), and Mg(ClO(4))(2), the hydride transfer reaction from BNAH to Q also occurs besides the cycloaddition reaction and the k(obs) value decreases with decreasing the Lewis acidity of the metal ion. Such a change in the type of reaction from a cycloaddition to a hydride transfer depending on the Lewis acidity of metal ions employed as a catalyst is well accommodated by the common reaction mechanism featuring the metal-ion promoted electron transfer from BNAH to Q.     

Electrostatically immobilised BOX and PYBOX metal catalysts: application to ene reactions

Copper(I), copper(II) and scandium(III) triflate complexes of BOX and PYBOX ligands have been electrostatically immobilised on silica. The performance of the immobilised catalysts, in the two carbonyl-ene reactions studied, compares very well with that of their homogeneous equivalents. The immobilised catalysts were successfully reused a number of times. In the case of a scandium complex, a variation in enantioselectivity of up to 73% was observed on immobilisation compared to its use homogeneously. The reason for this variation in enantioselectivity is explored with the aid of molecular modelling.     

Silylium ion-catalyzed challenging Diels-Alder reactions: the danger of hidden proton catalysis with strong Lewis acids

The pronounced Lewis acidity of tricoordinate silicon cations brings about unusual reactivity in Lewis acid catalysis. The downside of catalysis with strong Lewis acids is, though, that these do have the potential to mediate the formation of protons by various mechanisms, and the thus released Br?nsted acid might even outcompete the Lewis acid as the true catalyst. That is an often ignored point. One way of eliminating a hidden proton-catalyzed pathway is to add a proton scavenger. The low-temperature Diels-Alder reactions catalyzed by our ferrocene-stabilized silicon cation are such a case where the possibility of proton catalysis must be meticulously examined. Addition of the common hindered base 2,6-di-tert-butylpyridine resulted, however, in slow decomposition along with formation of the corresponding pyridinium ion. Quantitative deprotonation of the silicon cation was observed with more basic (Mes)(3)P to yield the phosphonium ion. A deuterium-labeling experiment verified that the proton is abstracted from the ferrocene backbone. A reasonable mechanism of the proton formation is proposed on the basis of quantum-chemical calculations. This is, admittedly, a particular case but suggests that the use of proton scavengers must be carefully scrutinized, as proton formation might be provoked rather than prevented. Proton-catalyzed Diels-Alder reactions are not well-documented in the literature, and a representative survey employing TfOH is included here. The outcome of these catalyses is compared with our silylium ion-catalyzed Diels-Alder reactions, thereby clearly corroborating that hidden Br?nsted acid catalysis is not operating with our Lewis acid. Several simple-looking but challenging Diels-Alder reactions with exceptionally rare dienophile/enophile combinations are reported. Another indication is obtained from the chemoselectivity of the catalyses. The silylium ion-catalyzed Diels-Alder reaction is general with regard to the oxidation level of the α,β-unsaturated dienophile (carbonyl and carboxyl), whereas proton catalysis is limited to carbonyl compounds.     

The application of oscillating chemical reactions to analytical determinations

Oscillating chemical reactions, which are far from equilibrium, are extremely sensitive to certain species and may provide new analytical methods using the regular oscillations as well as the non-equilibrium stationary state after system bifurcation. This review of their application to analytical chemistry from 2005 to 2012 includes other appropriate references. Both organic and inorganic analytes are included.     

Kinetics of the thiazolium ion-catalyzed benzoin condensation.

The formation of benzoin (Ph-CHOH-CO-Ph) from two molecules of benzaldehyde, catalyzed by 3-benzyl-5-(2-hydroxyethyl)-4-methylthiazolium bromide in methanol buffered with Et(3)N/Et(3)NH(+)Cl(-) has been studied. Initial-rate studies at various concentrations of PhCHO (0.1-1.7 M) showed that the reaction is close to being first order in PhCHO. Following the reaction in deuteriomethanol, (1)H NMR spectroscopy allowed rate constants for all three kinetically significant steps to be determined. These show that all three steps are partially rate-determining. A normal deuterium kinetic isotope effect for the overall reaction (k(H)/k(D) approximately 3.4) is observed using PhCDO, and a large inverse solvent isotope effect (k(D)/k(H) approximately 5.9) is observed using deuteriomethanol, consistent with the kinetic scheme presented here.     

The stereochemistry of the reactions of organo transition metal complexes

The stereochemistry of homogeneously catalysed hydrogenation, carbonylation and decarbonylation is discussed, as well as the stereochemistry of nucleophilic and electrophilic addition to co-ordinated alkynes and dienes. Examples are presented of formation and lysis of carbon-transition metal bonds together with data relating to the steric course of these processes.     

The application of the reaction calorimetry to investigate reactions involving unstable compounds

The RC1 calorimeter revealed itself a suitable instrument to obtain information about safety and mechanisms involved in the reaction between cyclohexanecarboxylic acid (AEB) and oleum. A previous hypothesis about the existence of an unstable intermediate was confirmed and its heat of formation was calculated. The heat of sulphonation related to undesirable by-products production and the heat of protonation of AEB with H₂SO₄ were also evaluated. Therefore, it was possible to distinguish the reactions involved in the process and, through their thermal behaviour, to determine the limit conditions to avoid the by-products formation.

---

Zusammenfassung Das RC1 Kalorimeter erwies sich als ein geeignetes Instrument, um Informationen über Sicherheit und Mechanismen bei der Reaktion von Cyclohexancarbonsäure (AEB) und Oleum zu gewinnen. Eine bereits bestehende Hypothese über die Existenz eines instabilen Zwischenproduktes konnte bestätigt und dessen Bildungswärme berechnet werden. Weiterhin wurde auch die Sulphonierungswärme bezogen auf die Entstehung von unerwünschten Nebenprodukten und die Protonierungswärme von AEB durch H₂SO₄ ermittelt. Es ist deshalb möglich, die einzelnen Reaktionen innerhalb dieses Prozesses über ihr thermisches Verhalten voneinander zu unterscheiden, um die Grenzbedingungen zur Vermei-dung der Bildung von Nebenprodukten zu ermitteln.

     

The implementation of analytical energy gradients based on a quasi-relativistic density functional method: The application to metal carbonyls

The capabilities of the quasi-relativistic scheme due to J. G. Snijders at al. [Mol. Phys, 38 , 1969 (1979) Ibid., J. Phys. Chem. 93 , 3050 (1989)] has been extended by deriving expressions for the energy gradients with respect to the total energy E^QR and implementing them into the ADF program system [B. to Velde and E. J. Baerends, Int. J. Quantum Chem. 33 , 87 (1988)]. This implementation enables automated geometry optimization at the relativistic level. The new scheme has been applied together with a self-consistent nonlocal density functional scheme, NL –SCF + QR , to the calculation of M? CO bond lengths and the first bond dissociation energy (FBDE ) in the binary transition metal carbonyls M(CO)₅ (M = Fe, Ru, Os) and M(CO)₆ (M = Cr, Mo, W). The calculated M? CO bond lengths are in good agreement with available experimental data with an error typically smaller than 0.01 Å. The calculated FBDES are 45.7 (Fe), 33.0 (Ru), 34.7 (Os), 46.2 (Cr), 39.7 (Mo), and 43.7 (W) kcal/mol, respectively. These values compare well with the available experimental estimates of 42 (Fe), 28 (Ru), 31 (Os), 37 (Cr), 41 (Mo), and 46 (W), respectively. The relativistic effects are found to contract M? CO bonds by between 0.07 and 0.16 A and strengthen the FBDEs by 5-11 kcal/mol for third-row compounds. The relativistic stabilization of the FBDES among the 5d elements makes, in general, the M? CO bond of the 4d element weakest within a triad. © 1995 John Wiley & Sons, Inc.     

The application of high pressure to some difficult Wittig reactions

Wittig reactions, previously shown to be favourably accelerated under pressure have been carried out between the stabilised ylides carboethoxymethylenetriphenylphosphorane and carboethoxy- ethylidinetriphenylphosphorane with a variety of ketones at 9–10 kbar pressure. Successful formation of tri- and tetra-substituted ethylenes is reported.     

Addition reactions to cyclopolyolefin transition metal π complexes

The non-coordinated double bonds of (η⁴-1,2,3,4-cycloheptatriene)Fe(CO)₃ and (η⁴-1,2,5,6-cyclooctatetraene)Co(η⁵-C₅H₅) add methylene generated from the Simmons-Smith reaction to yield (η⁴-2,3,4,5-bicyclo[5.1.0]octa-2,4-diene)Fe(CO)₃ and (η⁴-2,3,7,8-tricyclo[7.1.0.0^4,6]deca-2,7-diene)Co(η⁵-C₅H₅). An analogous reaction of (η⁴-1,2,3,4-cyclooctatetraene)Fe(CO)₃ yields (η⁴-6,7,8,9-tricyclo[8.1.0.0^3,5]undeca-6,8-diene)Fe(CO)₃, a product of the addition of three equivalents of methylene in which a cyclopropyl ring opening is proposed to occur. Dichlorocatbene, generated from C₆H₅HgCCl₂Br, would not react in a similar fashion. A BH₃ · THF solution would react with these starting materials but unusual products were produced.     

The application of 5,5,7,12,12,14-hexamethyl-1,4,8,11-tetraazacyclotetradecane to the extraction of metal ions

The use of 5,5,7,12,12,14-hexamethyl-1,4,8,11-tetraazacyclotetradecane (Tet) in chloroform solutions provides quantitative extraction of lead(II), cadmium(II), copper(II) and zinc(II) at different pH values from solutions containing perchlorate and cyclohexanecarboxylic acid. Nickel(II) and cobalt(II) ions are not extracted quantitatively. Single extractions of mixtures of copper with transition metals gave the best separations for the copper/nickel system. Separations of copper from cobalt, lead, manganese and iron were less satisfactory.     

The application of holographic techniques to kinetic studies of photopolymerization reactions

The holographic techniques are applied to the kinetic study of a photopolymerization reaction under steady state illumination. A theoretical approach of this problem is introduced which allows the intrinsic initiating activity of several amine-derived radicals to be determined.     

Molecular sieves 4A work to mediate the catalytic metal enolization of nucleophile precursors: application to catalyzed enantioselective Michael addition reactions

Molecular sieves 4A (MS4A) work effectively as base leading to catalytic generation of nickel(II) enolate or nitronate nucleophiles through deprotonation of the α-hydrogen atom of nucleophile precursors on treatment with a catalytic amount of chiral nickel(II) ions. The resulting reactive intermediates can be successfully trapped with α,β-unsaturated carbonyl electrophiles to produce the corresponding Michael adducts in good yields with high enantioselectivities.     

The application of MIM method to spiroconjugated systems

The Molecules in Molecules method has been applied to spiroconnected systems. Energy, polarisation and intensity of electronic transitions of spiro(5,5)undeca-1,4,6,9-tetraene-3,8-dione have been compared with experimental data and PPP results. Through a configuration analysis, PPP wave functions have been interpreted in terms of MIM configurations. The results show that the method is conveniently applicable to spiroconnected systems.

---

Zusammenfassung Die Molecules in Molecules-Methode wurde auf Spiro-verbundene Systeme angewendet. Es wurden Energie, Polarisation und die Intensität der elektronischen Übergänge von Spiro(5,5)undeca1, 4,6,9-Tetraene-3,8-dione mit den experimentellen Werten und PPP-Ergebnissen verglichen. PPP-Eigenfunktionen wurden in MIM-Konfigurationen ausgedrückt. Die Ergebnisse zeigen, daß die Methode für Spiro-verbundene Systeme verläßlich ist.

---

Résumé La méthode molecules in molecules a été appliquée à molécules spiroconjugées. On a comparé les énergies, la polarisation et l'intensité des transitions électroniques de spiro (5,5)undeca-1,4,6,9-tetraene-3, 8-dione avec les données expérimentales et les données PPP. Parmis un Configuration Analysis on a interprété les PPP fonctions d'onde en termes de MIM configurations. Les résultats indiquent que la méthode est applicable aux systèmes spiroconjugées.

     

The application of the CSB to the prediction of single step reactions and reaction pathways

Applications of the CSB (Common-Sense Builder) system for the logic-oriented and knowledge-assisted simulation of chemical reaction courses are described. We present the possibility of using the CSB for two ways of reaction simulation, i.e., as a multi-step process or as single step procedure. Results of the first simulation type are given to predict the course, and to model reaction mechanism. The second one is capable of complex chemical transformations such as multi-component and cascade reactions to generate structurally diverse products for combinatorial chemistry. In several experiments performed, we analyze the capabilities and limitations of the CSB modules and controlling tools for the examination and selective generation of solutions.