The cell-penetrating peptide TAT(48-60) induces a non-lamellar phase in DMPC membranes.

Cell-penetrating peptides (CPPs) are short polycationic sequences that can translocate into cells without disintegrating the plasma membrane. CPPs are useful tools for delivering cargo, but their molecular mechanism of crossing the lipid bilayer remains unclear. Here we study the interaction of the HIV-derived CPP TAT (48-60) with model membranes by solid-state NMR spectroscopy and electron microscopy. The peptide induces a pronounced isotropic (31)P NMR signal in zwitterionic DMPC, but not in anionic DMPG bilayers. Octaarginine and to a lesser extent octalysine have the same effect, in contrast to other cationic amphiphilic membrane-active peptides. The observed non-lamellar lipid morphology is attributed to specific interactions of polycationic peptides with phosphocholine head groups, rather than to electrostatic interactions. Freeze-fracture electron microscopy indicates that TAT(48-60) induces the formation of rodlike, presumably inverted micelles in DMPC, which may represent intermediates during the translocation across eukaryotic membranes.     

Fluorescence analysis of the interaction of two peptide sequences of hepatitis GB virus C with liposomes

The physicochemical characterization of the peptide sequences E2 (39-53) and E2 (32-59) corresponding to the structural protein E2 of the GB virus C was done by studying their interaction with model membranes. The peptides showed surface activity concentration dependent when injected beneath a buffered solution. This tendency to accumulate into the air/water interface suggested a potential ability of these peptides to interact with bilayers. For that reason, Small Unilamellar Liposomes (SUVs) of 1,2-dimyiristoyl-sn-Glycero-3-Phosphocholine (DMPC) or 1,2-dimyiristoyl-sn-Glycero-3-[Phospho-rac-(1-glycerol)] (DMPG) were chosen as a mimetic membranes. A series of fluorescence experiments based on tryptophan peptide fluorescence or with fluorescence labeled SUVs, were done to cover different aspects of peptide interaction with bilayers. Steady state fluorescence anisotropy studies with N-(7-nitro-2-1,3-benzoxadiazol-4-yl) dioleoylphosphatidylethanolamine (NBD-PE) or 1-[4-(trimethylammonium) phenyl]-6-phenyl-1,3,5-hexatriene (TMA-DPH) labeled SUVs indicated that only the long peptide was able to change the lipid microenvironment of DMPG vesicles by slightly increasing the rigidity of the bilayer both above and under the lipid main transition temperature. These results were concordant with the slight blue shift of the maximum tryptophan wavelength emission after E2 (32-53) peptide incubation with DMPG vesicles. Our data provide useful information for the design of synthetic immunopeptides that can be incorporated into a liposomal system with a potential to promote a direct delivery of the membrane-incorporated immunogen to the immunocompetent cells, thus increasing the immuno response from the host.     

Effects of the phosphatidylglycerol head group on the binding of short dermcidin-derived peptides to the phospholipid membrane surface

Dermcidin (DCD) is a human peptide composed of 110 amino acids. When secreted into sweat, DCD undergoes postsecretory proteolytic processing to give the short antimicrobial peptides SSL-23 and SSL-25. As an initial phase of studies directed toward understanding the structural basis of the biological functions of these peptides, we chemically synthesized naturally occurring SSL-23 and SSL-25, as well as the artificial sequences SSL-21 and SSL-27, and analyzed their molecular interaction with bacterial and mammalian model surfaces. While dynamic-coating HPLC and CD spectroscopy revealed that the four SSL peptides selectively bound to a bacterial model membrane containing 1,2-dimyristoyl phosphatidylglycerol (DMPG) and underwent large structural changes, ³¹P NMR studies of the liposomes suggested that the attractive interaction between the peptides and DMPG did not lead to ion-pore formation or disruption of the model membrane. Our results strongly indicate that the SSL peptides express their selectivity to microorganisms by recognizing the head groups of their cell surface lipid.     

Effect of peptide length on the interaction between consensus peptides and DOPC/DOPA bilayers

The effect of peptide length and electrostatics on the interaction between Cardin motif peptides and lipid membranes was investigated for (AKKARA)(n) (n = 1-4) and (ARKAAKKA)(n) (n = 1-3) peptides (A, K, and R refer to alanine, lysine, and arginine, respectively) by fluorescence spectroscopy, circular dichroism, ellipsometry, z potential, and photon correlation spectroscopy measurements. The effect of the peptides regarding leakage induction of both zwitterionic and anionic liposomes increased with increasing peptide length, as did the peptide-induced killing of Enterococcus faecalis and Bacillus subtilis bacteria. The peptides, characterized by a random coil conformation both in buffer and when attached to the liposomes (helix content less than 20%), displayed an increased adsorption with increasing peptide length, and plateau adsorption for the longest peptides corresponded to 1 peptide per 65 and 17 lipid molecules for zwitterionic and anionic membranes, respectively. Control experiments with uncharged peptide analogues as well as experiments at high excess electrolyte concentration showed that peptide charges are important both for peptide adsorption and leakage induction. These observations, together with observations of the liposome z potential at different peptide additions as well as a comparison between the results for zwitterionic and anionic liposomes, suggest that electrostatically affected local packing effects are crucial for the action of these peptides, although pore formation such as that observed for many AMPs cannot be excluded at present.     

Effects of overlapping GB virus C/hepatitis G virus synthetic peptides on biomembrane models

The present study was undertaken to examine the physicochemical properties of three overlapping peptides belonging to the E2 envelope protein of Hepatitis G virus (GBV-C/HGV) and its interaction with phospholipid biomembrane models using biophysical techniques. We describe our findings concerning the surface activity and the interaction of the peptides with monolayers and liposomes composed of the zwitterionic phospholipids dipalmitoylphosphatidylcholine and dimyristoylphosphatidylcholine (DMPC) and a mixture of DMPC with the anionic phospholipid dimyristoylphosphatidylglycerol. The results inform about the effect of the chain length on their interaction with biomembrane models. The longest chain peptide interacts in a higher extent with all the phospholipid studied as a result of a combination of hydrophobic and electrostatic forces.     

Environmental factors differently affect human and rat IAPP: conformational preferences and membrane interactions of IAPP17-29 peptide derivatives

Interest in the 37-residue human islet amyloid polypeptide (hIAPP) is related to its ability to form amyloid deposits in patients affected by type II diabetes. Attempts to unravel the molecular features of this disease have indicated several regions of this polypeptide to be responsible for either the ability to form insoluble fibrils or the abnormal interaction with membranes. To extend these studies to peptides that enclose His18, whose ionization state is believed to play a key role in the aggregation of hIAPP, we report on the synthesis of two peptides, hIAPP17-29 and rIAPP17-29, encompassing the 17-29 sequences of human and rat IAPP, respectively, as well as on their conformational features in water and in several membrane-mimicking environments as revealed by circular dichroism (CD) and 2D-NMR studies. hIAPP17-29 adopts a beta-sheet structure in water and its solubility increases at low pH. Anionic sodium dodecyl sulfate (SDS) micelles promoted the formation of an alpha-helical structure in the peptide chain, which was poorly influenced by pH variations. rIAPP17-29 was soluble and unstructured in all the environments investigated, with a negligible effect of pH. The membrane interactions of hIAPP17-29 and rIAPP17-29 were assessed by recording differential scanning calorimetry (DSC) measurements aimed at elucidating the peptide-induced changes in the thermotropic behaviour of zwitterionic (DPPC) and negatively charged (DPPC/DPPS 3:1) model membranes (DPPC=1,2-dipalmitoyl-sn-glycero-3-phosphocholine, DPPS=1,2-dipalmitoyl-sn-glycero-3-phosphoserine). Results of DSC experiments demonstrated the high potential of hIAPP17-29 to interact with DPPC membranes. hIAPP17-29 exhibited a negligible affinity for negatively charged DPPC/DPPS model membranes at neutral pH. On the other hand, rIAPP17-29 did not interact with neutral or negatively charged membranes. The role played by His18 in the modulation of the biophysical properties of this hIAPP region was assessed by synthesising and studying the R18HrIAPP17-29 peptide; the replacement of a single Arg with a His residue is not sufficient to induce either amyloidogenic propensity or membrane interaction in this region. The results show that the 17-29 domain of hIAPP has many properties of the full-length protein "in vitro" and this opens up new perspectives for both research and eventually therapy.     

Interaction of the cationic peptide bactenecin with mixed phospholipid monolayers at the air-water interface

The initial mechanism by which antimicrobial peptides target microbes occurs via electrostatic interactions; however, the mechanism is not well understood. We investigate the interaction of the antimicrobial peptide bactenecin with a 50:50 w:w% 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) and 1,2-dimyristoyl-sn-glycero-3-phospho-(1'-rac-glycerol) (DMPG) phospholipid mixture at the air-water interface with different NaCl concentrations (0.01, 0.05, 0.1, 0.5 M) in the subphase. A larger shift of DPPC:DMPG isotherms was obtained for 0.1 M salt concentration at lower and higher pressures, demonstrating the influence of the negative charge of DMPG molecules and the screening of the electrostatic interaction by the salt concentration. Raman spectroscopy of monolayers demonstrated the presence of cysteine-cysteine bridges in bactenecin loops. The peptide adsorption in DPPC:DMPG monolayers observed by AFM images suggests a self-assembled aggregation process, starting with filament-like networks. Domains similar to carpets were formed and pore structures were obtained after a critical peptide concentration, according to the carpet model.     

Membrane-mediated capillary electrophoresis: interaction of cationic peptides with bicelles

Electrokinetic capillary chromatography is applied to determine the membrane affinity of peptides using both 1,2-dihexanoyl-sn-glycero-3-phosphocholine (DHPC) micelles and DHPC/1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) bicelles under controlled conditions. The effect of temperature and the bicelle q value in surface association with cationic peptides is studied. The cationic peptides selected have a well-defined membrane structure (indolicidin), induced secondary structure (melittin, magainin 2), or do not possess classical secondary structure (atrial natriuretic peptide (ANP) 1-28, 4-28, 5-27). Electrokinetic capillary chromatography facilitated by DMPC and DHPC additives provides a rapid means of estimating lipophilicity and screening for peptides that have membrane affinity.     

Interactions in lipid stabilised foam films

The interaction between lipid bilayers in water has been intensively studied over the last decades. Osmotic stress was applied to evaluate the forces between two approaching lipid bilayers in aqueous solution. The force–distance relation between lipid mono- or bilayers deposited on mica sheets using a surface force apparatus (SFA) was also measured. Lipid stabilised foam films offer another possibility to study the interactions between lipid monolayers. These films can be prepared comparatively easy with very good reproducibility. Foam films consist usually of two adsorbed surfactant monolayers separated by a layer of the aqueous solution from which the film is created. Their thickness can be conveniently measured using microinterferometric techniques. Studies with foam films deliver valuable information on the interactions between lipid membranes and especially their stability and permeability. Presenting inverse black lipid membrane (BLM) foam films supply information about the properties of the lipid self-organisation in bilayers. The present paper summarises results on microscopic lipid stabilised foam films by measuring their thickness and contact angle. Most of the presented results concern foam films prepared from dispersions of the zwitterionic lipid 1,2-dimyristoyl-sn-glycero-3-phosphorylcholine (DMPC) and some of its mixtures with the anionic lipid — 1,2-dimyristoyl-sn-glycero-3-[phospho-rac-(1-glycerol)] (DMPG).     

Fluorescence study of the fluidity and cooperativity of the phase transitions of zwitterionic and anionic liposomes confined in sol-gel glasses

The current work makes use of different fluorescent reporter molecules and fluorescent spectroscopic techniques to characterize the thermotropic, physical, and dynamical properties of large unilamellar liposomes formed from either 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) or 1,2-dimyristoyl-sn-glycero-3-[phospho-rac-glycerol] (DMPG) encapsulated in sol-gel matrixes. In particular, cooperativity of the phase transition is analyzed from steady-state fluorescence anisotropy of 1,6-diphenyl-1,3,5-hexatriene (DPH), the interfacial properties are studied by measuring the spectral shift of Laurdan, and the structural organization (heterogeneity) of the lipid bilayer is determined from the fluorescence lifetime of trans-parinaric acid (t-PnA). In addition, information regarding order and dynamical properties in the bulk hydrophobic core is obtained from time-resolved fluorescence anisotropy of t-PnA and 3-(4-(6-phenyl)-1,3,5-hexatrienyl)-phenylpropionic acid (PA-DPH). The spectroscopic study reveals that upon encapsulation, the basic thermodynamic properties as well as the fluidity of the lipid bilayer practically remain intact for DMPG liposomes but not for DMPC liposomes, whose lipid bilayer exhibits large gel-fluid heterogeneity. On the basis of these experimental results, electrostatic interactions between phospholipid polar heads and the porous surface of the host matrix seem to play a capital role for the preservation of the structural integrity of encapsulated bilayer.     

Temperature driven annealing of perforations in bicellar model membranes

Bicellar model membranes composed of 1,2-dimyristoylphosphatidylcholine (DMPC) and 1,2-dihexanoylphosphatidylcholine (DHPC), with a DMPC/DHPC molar ratio of 5, and doped with the negatively charged lipid 1,2-dimyristoylphosphatidylglycerol (DMPG), at DMPG/DMPC molar ratios of 0.02 or 0.1, were examined using small angle neutron scattering (SANS), (31)P NMR, and (1)H pulsed field gradient (PFG) diffusion NMR with the goal of understanding temperature effects on the DHPC-dependent perforations in these self-assembled membrane mimetics. Over the temperature range studied via SANS (300-330 K), these bicellar lipid mixtures exhibited a well-ordered lamellar phase. The interlamellar spacing d increased with increasing temperature, in direct contrast to the decrease in d observed upon increasing temperature with otherwise identical lipid mixtures lacking DHPC. (31)P NMR measurements on magnetically aligned bicellar mixtures of identical composition indicated a progressive migration of DHPC from regions of high curvature into planar regions with increasing temperature, and in accord with the "mixed bicelle model" (Triba, M. N.; Warschawski, D. E.; Devaux, P. E. Biophys. J.2005, 88, 1887-1901). Parallel PFG diffusion NMR measurements of transbilayer water diffusion, where the observed diffusion is dependent on the fractional surface area of lamellar perforations, showed that transbilayer water diffusion decreased with increasing temperature. A model is proposed consistent with the SANS, (31)P NMR, and PFG diffusion NMR data, wherein increasing temperature drives the progressive migration of DHPC out of high-curvature regions, consequently decreasing the fractional volume of lamellar perforations, so that water occupying these perforations redistributes into the interlamellar volume, thereby increasing the interlamellar spacing.     

Phase dependent electrochemical properties of polar self-assembled monolayers (SAMs) modified via the fusion of mixed phospholipid vesicles

Unilamellar vesicles of 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) and varying quantities of either 1,2-dimyristoyl-sn-glycero-3-[phospho-rac-(1-glycerol) (sodium salt) (DMPG) or 1,2-dimyristoyl-3-trimethylammonium-propane (chloride salt) (DMTAP) were used to deposit lipid bilayer assemblies on self-assembled monolayers (SAMs) on gold. The supporting SAMs in turn were composed of ferrocene-functionalized hexadecanethiol chains (FcC16SH) diluted to low coverage in 1-hydroxylhexadecanethiol (HOC16SH) or a single-component monolayer phase of the latter. The mass coverages of the DMPC/DMPG layers deposited in this way were measured using surface plasmon resonance (SPR) and found to decrease with an increasing content of DMPG in the vesicles. The SPR data show that the lipid assembly, while stable with respect to gentle rinsing in aqueous buffer, is reversible and the lipid adlayer is removable by immersion in a solvent such as ethanol. The effects of the adsorbed lipid layer on the electrochemical interactions of the hybrid lipid/SAM with several redox probes [e.g., K4Fe(CN)6, Ru(NH3)6Cl3, and CsHsFe-[(C5H4CH2N+H(CH3)2] were characterized using cyclic voltammetry (CV). At a composition of 5% DMPG in DMPC, the permeabilities of the probes through the lipid layer were affected significantly relative to that observed with a pure DMPC layer. These effects include a striking observation of an enhanced, ionic-charge-specific molecular discrimination of the electrochemical probes. At higher concentrations of the DMPG, significant permeation of the lipid adlayer was seen for all the probes. These latter changes are also attended by a significant increase in the capacitive currents measured in CV experiments as compared to those observed for either a pure SAM or one modified by only DMPC. This effect likely results from the influence of the charged lipid on the diffuse Gouy-Chapman electrolyte layer at the SAM interface. In contrast to the behaviors seen with DMPG, the incorporation of DMTAP into the adsorbed DMPC had no impact on the permeation of the adlayer by soluble redox probes as judged by the observed electrochemistry, a result that appears to correlate with a less ideal mixing of lipids in the DMPC/DMTAP system relative to that of a DMPC/DMPG mixture.     

The interaction of a peptide with a scrambled hydrophobic/hydrophilic sequence (Pro-Asp-Ala-Asp-Ala-His-Ala-His-Ala-His-Ala-Ala-Ala-His-Gly) (PADH) with DPPC model membranes: a DSC study

Depending on their hydrophobicity, peptides can interact differently with lipid membranes inducing dramatic modifications into their host systems. In the present paper, the interaction of a synthetic peptide with a scrambled hydrophobic/hydrophilic sequence (Pro-Asp-Ala-Asp-Ala-His-Ala-His-Ala-His-Ala-Ala-Ala-His-Gly) (PADH) with 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) model membranes has been investigated by differential scanning calorimetry (DSC), adopting three different experimental approaches. In the first, the peptide is forced to be included into the hydrocarbon region of the lipid bilayer, by codissolving it with the lipid giving rise to mixed multilamellar vesicles–peptide systems; in the second, this system is passed through an extruder, thus producing large unilamellar vesicles–peptide systems; in the third, it is allowed to interact with the external surface of the membrane.

The whole of the DSC results obtained have shown that the incorporation of the peptide into the lipid bilayer by means of the first method induces a decrease in the enthalpy of the gel–liquid crystal transition of the membrane and a shift of the transition to the lower temperatures, thus resembling, in spite of its prevalently hydrophilic nature, the behavior of transbilayer hydrophobic peptides. The extrusion of these systems creates unilamellar vesicles free of peptides but of smaller size as evidenced by the decreased cooperativity of the transition. The peptide, added externally to the DPPC model membrane, has no effect on the phase behavior of the bilayer.

These findings suggest that the effect of the interaction of scrambled hydrophobic/hydrophilic peptides into lipid bilayers strongly affects the thermotropic behavior of the host membrane depending on the preparation method of the lipid/peptide systems. The whole of the results obtained in the present paper can be useful in approaching studies of bioactive peptides/lipids systems.     

Membrane Structure of Substance P. II. Secondary Structure of Substance P, [9-Leucine]substance P,and Shorter Segments in 2,2,2-Trifluoroethanol,Methanol, and on Liposomes Studied by Circular Dichroism

Comparative CD studies with substance P ( 1 ), [Leu⁹]substance P ([Leu⁹]- 1 ), and their shorter peptide segments supported the membrane structures predicted for substance P and [Leu⁹]substance P. They indicated that the C-terminal segments (from residue 3 or 4 onward) can adopt α-helical conformations in hydrophobic environments and on lipid membranes. The N-terminal segment, (residues 1–4) had a poly(proline)-like conformation in aqueous and hydrophobic surroundings. Residues 3 and 4 (Lys-Pro) appeared to belong to both domains and bring about the transition between the two. The estimated free energies of transfer for 1 and [Leu⁹]- 1 from their random conformations in H₂O to their partially helical conformations on an aqueous-hydrophobic interface are too small to allow detectable interaction with neutral lipid membranes at low concentrations. The two peptides should, however, interact detectably with anionic membranes because of favourable Boltzmann distribution factors. This prediction was shown to be correct for liposomes prepared from 1,2-dioleoyl-sn-glycero-3-phosphocholine (neutral) and phosphatidylserine (anionic).     

Liposome modified with Mn-porphyrin complex can simultaneously induce antioxidative enzyme-like activity of both superoxide dismutase and peroxidase

An antioxidative liposome catalysis that mimics both superoxide dismutase (SOD) and peroxidase (POD) activities has been developed by using the liposomes modified with lipophilic Mn-(5,10,15,20-tetrakis[1-hexadecylpyridium-4-yl]-21H,23H-porphyrin) (Mn-HPyP). The SOD- and POD-like activities of the Mn-HPyP-modified liposome were first investigated by varying the type of phospholipid, such as 1,2-distearyl-sn-glycero-3-phosphocholine (DSPC), 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC), 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC), and 1,2-dilauroyl-sn-glycero-3-phosphocholine (DLPC). Higher SOD-like activity was obtained in the case of DLPC and DMPC liposomes, in which the ligands were well-dispersed on the membrane in the liquid crystalline phase. The POD-like activity was maximal in the case of DMPC liposome, in which the Mn-HPyP complex was appropriately clustered on the membrane in the gel phase. On the basis of the above results, the co-induction of the SOD and POD activities to eliminate the superoxide and also hydrogen peroxide as a one-pot reaction was finally performed by using the Mn-HPyP-modified DMPC liposome, resulting in an increase in the efficiency of the elimination of both superoxide and hydrogen peroxide.     

Effect of amyloid beta peptides Aβ<Subscript>1–28</Subscript> and Aβ<Subscript>25–40</Subscript> on model lipid membranes

To investigate the molecular interaction of amyloid beta peptides Aβ_1–28 or Aβ_25–40 with model lipid membranes differential scanning calorimetry (DSC) and DPH and TMA DPH fluorescence anisotropy approaches were used. The main transition temperature (T _m) and enthalpy change (ΔH) of model lipid membranes composed of DMPC/DPPG on addition of Aβ_25–40 or Aβ_25–40 at 10:1 (w/w) phospholipid/peptide ratio either non-aggregated or previously aggregated were examined. The effect of Aβ_1–28 and Aβ_25–40 on the membrane fluidity of liposomes made of DMPC/DPPG (98:2 w/w) was determined by fluorescence anisotropy of incorporated DPH and TMA DPH. The results of this study provide information that Aβ_1–28 preferentially interacts with the hydrophilic part of the model membranes, while Aβ_25–40 rather locates itself in the hydrophobic core of the bilayer where it reduces the order of the phospholipids packing.     

Membrane orientation of MSI-78 measured by sum frequency generation vibrational spectroscopy

Antimicrobial peptides (AMPs) selectively disrupt bacterial cell membranes to kill bacteria whereas they either do not or weakly interact with mammalian cells. The orientations of AMPs in lipid bilayers mimicking bacterial and mammalian cell membranes are related to their antimicrobial activity and selectivity. To understand the role of AMP-lipid interactions in the functional properties of AMPs better, we determined the membrane orientation of an AMP (MSI-78 or pexiganan) in various model membranes using sum frequency generation (SFG) vibrational spectroscopy. A solid-supported single 1,2-dipalmitoyl-an-glycero-3-[phospho-rac-(1-glycerol)] (DPPG) bilayer or 1-palmitoyl-2-oleoyl-sn-glycero-3-[phospho-rac-(1-glycerol)] (POPG) bilayer was used as a model bacterial cell membrane. A supported 1,2-dipalmitoyl-an-glycero-3-phosphocholine (DPPC) bilayer or a 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC) bilayer was used as a model mammalian cell membrane. Our SFG results indicate that the helical MSI-78 molecules are associated with the bilayer surface with ～70° deviation from the bilayer normal in the negatively charged gel-phase DPPG bilayer at 400 nM peptide concentration. However, when the concentration was increased to 600 nM, MSI-78 molecules changed their orientation to make a 25° tilt from the lipid bilayer normal whereas multiple orientations were observed for an even higher peptide concentration in agreement with toroidal-type pore formation as reported in a previous solid-state NMR study. In contrary, no interaction between MSI-78 and a zwitterionic DPPC bilayer was observed even at a much higher peptide concentration (～12,000 nM). These results demonstrate that SFG can provide insights into the antibacterial activity and selectivity of MSI-78. Interestingly, the peptide exhibits a concentration-dependent membrane orientation in the lamellar-phase POPG bilayer and was also found to induce toroidal-type pore formation. The deduced lipid flip-flop from SFG signals observed from lipids also supports MSI-78-induced toroidal-type pore formation.     

A mechanistic study of the permeation kinetics through biomembrane models: gemcitabine-phospholipid bilayer interaction

The kinetics of the interaction between Gemcitabine (a new anticancer drug) and phospholipid membrane models was investigated. This kind of study is of particular importance both in hypothesizing the interaction of Gemcitabine with mammalian cell membranes and in evaluating the potentiality of liposomes as a Gemcitabine delivery system. Unilamellar (LUV) and multilamellar (MLV) membrane models were made up of dimyristoylphosphatidylcholine (DMPC), dimyristoylphosphatidic acid sodium salt (DMPA), or a DMPC-DMPA mixture (1:1 molar ratio). Gemcitabine-phospholipid vesicle interaction was studied by differential scanning calorimetry (DSC) measurements performed at different time intervals. The findings showed slower permeation kinetics of Gemcitabine through MLV than LUV which, at the same lipid/water ratio, are characterized by a larger lipid surface in contact with the drug aqueous solution. Another interesting difference between LUV and MLV is the onset of a transient two-peak structure during the DSC scans of MLVs. The effect is due to the unequal distribution of the drug between the outer and inner bilayers of the multilamellar vesicles during the permeation kinetics. At equilibrium the two-peak structure merges into a unique peak. This finding may provide useful information about the lipid bilayer permeability in model membranes.     

Ruthenium-Decorated Lipid Vesicles: Light-Induced Release of [Ru(terpy)(bpy)(OH(2))](2+) and Thermal Back Coordination

Electrostatic forces play an important role in the interaction between large transition metal complexes and lipid bilayers. In this work, a thioether-cholestanol hybrid ligand (4) was synthesized, which coordinates to ruthenium(II) via its sulfur atom and intercalates into lipid bilayers via its apolar tail. By mixing its ruthenium complex [Ru(terpy)(bpy)(4)](2+) (terpy = 2,2';6',2'-terpyridine; bpy = 2,2'-bipyridine) with either the negatively charged lipid dimyristoylphosphatidylglycerol (DMPG) or with the zwitterionic lipid dimyristoylphosphatidylcholine (DMPC), large unilamellar vesicles decorated with ruthenium polypyridyl complexes are formed. Upon visible light irradiation the ruthenium-sulfur coordination bond is selectively broken, releasing the ruthenium fragment as the free aqua complex [Ru(terpy)(bpy)(OH(2))](2+). The photochemical quantum yield under blue light irradiation (452 nm) is 0.0074(8) for DMPG vesicles and 0.0073(8) for DMPC vesicles (at 25 °C), which is not significantly different from similar homogeneous systems. Dynamic light scattering and cryo-TEM pictures show that the size and shape of the vesicles are not perturbed by light irradiation. Depending on the charge of the lipids, the cationic aqua complex either strongly interacts with the membrane (DMPG) or diffuses away from it (DMPC). Back coordination of [Ru(terpy)(bpy)(OH(2))](2+) to the thioether-decorated vesicles takes place only at DMPG bilayers with high ligand concentrations (25 mol %) and elevated temperatures (70 °C). During this process, partial vesicle fusion was also observed. We discuss the potential of such ruthenium-decorated vesicles in the context of light-controlled molecular motion and light-triggered drug delivery.     

Liposome electrokinetic capillary chromatography in the study of analyte-phospholipid membrane interactions. Application to pesticides and related compounds

Interactions between low-molar mass analytes and phospholipid membranes were studied by liposome electrokinetic capillary chromatography (LEKC). The analytes were pesticides, some degradation products, and compounds associated with the manufacture of pesticides. Negatively charged liposome dispersions with different zwitterionic lipids (PC) were applied to the determination of retention factors (k) of 15 charged and uncharged compounds. The liposome dispersions consisted of 80:20 mol% of 1,2-dilauroyl-sn-glycero-3-phosphocholine (DLPC)/1-palmitoyl-2-oleoyl-sn-glycero-3-phospho-L-serine (POPS), 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC)/POPS, and 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC)/POPS. Retention factors were calculated from the effective electrophoretic mobilities of the analytes under LEKC and CZE conditions and from the effective electrophoretic mobilities of the liposomes, determined by CZE with a polyacrylamide-coated capillary. Determining the liposome mobilities in this way proved to be a good alternative to the conventional method employing a liposome marker compound. The log k values of the analytes for the different liposome dispersed phases were correlated with one another. In addition, correlation curves were determined between log k and calculated octanol-water partition coefficients. The results showed that the zwitterionic phospholipid in the liposome has a major impact on the interactions between the tested compounds and the lipid membranes.