Polycationic (mixed) core-shell dendrimers for binding and delivery of inorganic/organic substrates

The convergent synthesis of a series of polycationic aryl ether dendrimers has been accomplished by a convenient procedure involving quantitative quaternarization of aryl(poly)amine core molecules. The series has been expanded to the preparation of the first polycationic, mixed core-shell dendrimer. All these dendrimers consist of an apolar core with a peripheral ionic layer which is surrounded by a less polar layer of dendritic wedges. These cationic, macromolecular species have been investigated for their ability to form assemblies with (anionic) guest molecules. The results obtained from UV/Vis and NMR spectroscopies, and MALDI-TOF-MS demonstrate that all the cationic sites throughout the dendrimer core are involved in ion pair formation with anionic guests giving predefined guest/host ratios up to 24. The large NMR spectroscopic shifts of resonances correlated with the groupings located in the core of the dendrimers, together with the relaxation time data indicate that the anionic guests are associated with the cationic core of these dendrimers. The X-ray molecular structure of the octacationic, tetra-arylsilane model derivative [Si(C6H3[CH2NMe3](2)-3,5)4]8+. 8I- shows that the iodide counterions are primarily located near the polycationic sphere. The new polycationic dendrimers have been investigated for their catalytic phase-transfer behavior and substrate delivery over a nanofiltration membrane.     

Lipid bilayer disruption by polycationic polymers: the roles of size and chemical functional group

Polycationic polymers are used extensively in biology to disrupt cell membranes and thus enhance the transport of materials into the cell. The highly polydisperse nature of many of these materials makes obtaining a mechanistic understanding of the disruption processes difficult. To design an effective mechanistic study, a monodisperse class of polycationic polymers, poly(amidoamine) (PAMAM) dendrimers, has been studied in the context of supported dimyristoylphosphatidylcholine (DMPC) lipid bilayers using atomic force microscopy (AFM). Aqueous solutions of amine-terminated generation 7 (G7) PAMAM dendrimers caused the formation of 15-40-nm-diameter holes in lipid bilayers. This effect was significantly reduced for smaller G5 dendrimers. For G3, no hole formation was observed. In addition to dendrimer size, surface chemistry had a strong influence on dendrimer-lipid bilayer interactions. In particular, acetamide-terminated G5 did not cause hole formation in bilayers. In all instances, the edges of bilayer defects proved to be points of highest dendrimer activity. A proposed mechanism for the removal of lipids by dendrimers involves the formation of dendrimer-filled lipid vesicles. By considering the thermodynamics, interaction free energy, and geometry of these self-assembled vesicles, a model that explains the influence of polymer particle size and surface chemistry on the interactions with lipid membranes was developed. These results are of general significance for understanding the physical and chemical properties of polycationic polymer interactions with membranes that lead to the transport of materials across cell membranes.     

Thermosensitive properties of poly(amidoamine) dendrimers with peripheral phenylalanine residues

Dendrimers are unique polymers with globular shapes and well-defined structures. We previously prepared poly(amidoamine) (PAMAM) dendrimers having phenylalanine (Phe) residues at every chain end of the dendrimer as efficient gene carriers. In this study, we found that Phe-derivatized PAMAM dendrimers change their water solubility depending on temperature. The dendrimers were soluble in aqueous solutions at low temperatures, but they became water-insoluble at temperatures above a specific threshold, which is termed the lower critical solution temperature (LCST). Although the LCST of Phe-modified dendrimers decreased with increasing dendrimer generation, these dendrimers exhibited an LCST of 20-30 degrees C under physiological conditions. In addition, the LCST of the dendrimers was controlled by introducing isoleucine (Ile) residues at chain ends of dendrimers at varying ratios with respect to Phe residues. The PAMAM dendrimers are known to encapsulate various drug molecules. For these reasons, temperature-sensitive dendrimers might be useful as efficient drug carriers with controlled size and temperature-responsive properties.     

The Design of Second-order Nonlinear Optical Dendrimers: From “Branch Only” to “Root Containing”

Dendrimers are considered as a promising family of organic second-order nonlinear optical (NLO) polymers because of their well-defined structures,easily modified peripheral functional groups,interior branches and central cores.In order to obtain NLO materials with high performance,dendrimer structures have been optimized in the past years,such as the "branch only" and the "root containing" type dendrimers.This feature article highlights the achievements in exploring the rational design of dendrimers,partially marked by their macroscopic NLO performance.     

Comparison of PAMAM-Au and PPI-Au nanocomposites and their catalytic activity for reduction of 4-nitrophenol

Dendrimer-Au nanocomposites are prepared in aqueous solutions using poly(amidoammine)dendrimers (PAMAM) (generation 2, 3, and 5) and poly(propyleneimine)dendrimers (PPI)(generation 2, 3, and 4) by wet chemical NaBH(4) method. The Au nanoparticles thus obtained are 2-4 nm in diameter for both dendrimers and no generation dependence on the particle size is observed, whereas the generations of the dendrimers are increased as stabilization of Au-nanoparticles is achieved with lower dendrimer concentrations. Studies of the reduction reaction of 4-nitrophenol using these nanocomposites show that the rate constants for the PAMAM dendrimers (generations 2 and 3) are higher than those for the PPI dendrimers (generations 2 and 3), while a distinct difference in the rate constants is not seen for the PAMAM dendrimer (generation 5) or the PPI dendrimer (generation 4). In addition, the rate constants for the reduction of 4-nitrophenol involving all the dendrimers decrease with increases in dendrimer concentrations.     

Shape persistence and bistability of planar three-fold core polyphenylene dendrimers: a molecular dynamics study

We present an atomistic molecular dynamics investigation of the structural time evolution of isolated polyphenylene dendrimers, carbon based dendrimers with a planar core formed by a 1,3,5 trisubstituted benzene ring. Simulations are carried out at low (80 K) and room temperature. A general classification of the conformations (core conformations) assumed by the three dendrimer branches with respect to the planar core is presented. It is found that out of the six possible core conformations only four are stable, the remaining two being unstable for steric reasons. For second generation dendrimers, two of the four accessible core conformations are associated with an open arrangement of the three branches attached to the planar 3-fold core of the dendrimer, whereas the remaining two are associated with a collapsed arrangement of two branches. At low temperature the initial conformation is generally conserved whereas at room temperature jumps among the four possible core conformations are observed in the nanosecond time range. For second generation dendrimers the core conformation jumps are associated with an oscillation between two global shape states: open and collapsed. The computed bistability of the global shape suggests additional possible functional uses for some of these carbon based dendrimers.     

Specific binding structures of dendrimers on lipid bilayer membranes

Dissipative particle dynamics simulations are used to study the specific binding structures of polyamidoamine (PAMAM) dendrimers on amphiphilic membranes and the permeation mechanisms. Mutually consistent coarse-grained (CG) models both for PAMAM dendrimers and for dimyristoylphosphatidylcholine (DMPC) lipid molecules are constructed. The PAMAM CG model describes correctly the conformational behavior of the dendrimers, and the DMPC CG model can properly give the surface tension of the amphiphilic membrane. A series of systematic simulations is performed to investigate the binding structures of the dendrimers on membranes with varied length of the hydrophobic tails of amphiphiles. The permeability of dendrimers across membranes is enhanced upon increasing the dendrimer size (generation). The length of the hydrophobic tails of amphiphiles in turn affects the dendrimer conformation, as well as the binding structure of the dendrimer-membrane complexes. The negative curvature of the membrane formed in the dendrimer-membrane complexes is related to dendrimer concentration. Higher dendrimer concentration together with increased dendrimer generation is observed to enhance the permeability of dendrimers across the amphiphilic membranes.     

Rendering poly(amidoamine) or poly(propylenimine) dendrimers temperature sensitive

The poly(amidoamine) dendrimers having terminal isobutyramide (IBAM) groups were prepared by the reaction of isobutyric acid and the amine-terminated poly(amidoamine) dendrimers with generations (G) of 2 to 5 by using a condensing agent, 1,3-dicyclohexylcarbodiimide. 1H and 13C NMR revealed that an IBAM group was attached to essentially every chain end of the dendrimers. While the IBAM-terminated G2 dendrimer was soluble in water, the IBAM-terminated G3, G4, and G5 dendrimers exhibited the lower critical solution temperatures (LCSTs) at 75, 61, and 43 degrees C, respectively. Because the density of the terminal IBAM groups in the periphery of the dendrimer progressively increases with increasing dendrimer generation, the interaction of the IBAM groups might take place more efficiently, resulting in a remarkable decrease in the LCST. In addition, attachment of IBAM groups to poly(propylenimine) dendrimers could give the temperature-sensitive property, indicating that this is an efficient method to render dendrimers temperature sensitive.     

Demulsification by amphiphilic dendrimer copolymers

Amphiphilic block copolymers with dendrimer structures were synthesized by anion polymerization and these dendritic macromolecules exhibited excellent demulsification performance for crude oil emulsion. According to the demulsification experiments, we determined that the copolymers became more efficient with more complex molecular structure due to increased penetrability. The physical model of demulsification intelligibly explained the micromechanism of flocculation and coalescence of water drops in emulsion because of the good adsorption and displacement behaviors of dendrimers.     

以聚酰胺-胺树形分子为模板制备AgI纳米簇

本文以聚酰胺-胺(PAMAM)树形分子为模板,原位制备AgI纳米簇.系统地研究了AgI纳米簇制备过程中各种反应条件如树形分子端基、反应时间、Ag⁺与PAMAM摩尔比等对AgI纳米簇粒径的影响,分别用紫外-可见光谱、荧光光谱、透射电镜等对所制备的纳米簇进行表征.在相同的条件下,以G4.5-COOH₃为模板较以G5.0-NH₂为模板制备的AgI纳米簇粒径小、分布均匀,这主要取决于G4.5-COOCH₃PAMAM树形分子所起的“内模板”作用.G4.5-COOH₃树形分子浓度为1×10^-5mol/L,Ag⁺与树形分子摩尔比为30:1时所制备的AgI纳米簇的粒径分布均匀、稳定性好,室温避光可稳定存在两个月以上.     

Number of terminal groups versus generation of the dendrimer, which criteria influence the catalytic properties?

We report the synthesis of a dense dendrimer ended by the PTA ligand (1,3,5-triaza-7-phosphaadamantane), and the use of the corresponding Rh and Ru complexes for catalysis. The catalytic properties of these dendrimers are compared with those of two other dendrimers: a dendrimer of the same generation but having half the number of ligands, and a dendrimer of the next generation, but having the same number of ligands. The positive influence of the density of catalytic sites on the surface of these dendrimers for alcohol isomerization in water has been evidenced.     

Synthesis and properties of new thiourea-functionalized poly(propylene imine) dendrimers and their role as hosts for urea functionalized guests

Five generations of poly(propylene imine) dendrimers have been modified by palmityl and adamantyl endgroups via a thiourea linkage. The synthesis of the thiourea dendrimers DAB-dendr-(NHCSNHAd)(n) and DAB-dendr-(NHCSNHC(16)H(33))(n) (n = 4, 8, 16, 32, 64) proceeds smoothly via the amino-terminated DAB dendrimer and the adamantyl and palmityl isothiocyanates, respectively. The properties of the thiourea dendrimers have been studied by IR and (1)H NMR, including relaxation (T1, T2) measurements. The thiourea dendrimers are used as multivalent hosts for a number of guest molecules containing a terminal urea-glycine unit in organic solvents. The host-guest interactions have been investigated using 1D- and NOESY-NMR. These investigations show that the guest molecules bind to the dendritic host via thiourea (host)-urea (guest) hydrogen bonding, and ionic bonding between the terminal guest carboxylate moiety and the outer shell tertiary amines of the dendrimer. The ability to bind guest molecules of the adamantyl- and palmitylthiourea dendrimers has been compared with their respective urea containing dendrimer analogues, by NMR-titration, and competition experiments. Upon complexation, the thiourea dendrimer hosts show a larger downfield NH shift than the corresponding urea dendrimer hosts, indicative of stronger hydrogen bonding in the complexed state. Furthermore, microcalorimetry has been used to determine binding constants for formation of the host-guest complexes; the binding constants are typically in the order of 10(4) M(-1). Both NMR and microcalorimetric studies show that the thiourea dendrimers bind the urea containing guests with somewhat higher affinity than the corresponding urea dendrimers.     

Characterization of dendrimer properties by capillary electrophoresis and their use as pseudostationary phases

The general properties of dendrimers and in particular their electrolytic characteristics that are relevant in electrokinetic separations, are described. In order to confirm theoretical considerations on commercial dendrimer charge and hydrodynamic radius, several capillary zone electrophoresis (CZE) experiments were performed. Electrophoretic mobilities measured at different pH values indicated a sensible increase of dendrimer hydrodynamic radius at pH values lower than 2.5. This was probably due to the Coulombic repulsion of charged amine groups of the inner dendrimer shells. The principal reasons that should address the use of dendrimers as pseudostationary phases in micellar electrokinetic chromatography (MEKC) are discussed. Moreover, a survey of different separations performed utilizing dendrimers in MEKC as well as of several future plausible uses of various classes of dendrimers is presented.     

Efficient synthesis of porphyrin-containing,benzoquinone-terminated,rigid polyphenylene dendrimers

A series of rigid polyphenylene, free-base porphyrin-containing dendrimers terminated with either dimethoxybenzene or benzoquinone end-groups were prepared by a combined divergent and convergent synthesis. Unlike previous routes for preparing polyphenylene dendrimers that are incompatible with end-groups bearing certain functional moieties, the synthetic methodology chosen for this work enables incorporation of functional groups on the dendrimer end-groups during preparation of the dendrimer wedges and during synthesis of the final dendrimer. The basic strategy utilized a convergent preparation of dendrimer wedges using Suzuki coupling conditions, which were then either attached to a porphyrin core in a divergent coupling step or cyclized to form the porphyrin dendrimer in a convergent step. The latter approach was found to be more general and resulted in higher yields and more readily separated products. Steady-state absorption measurements for these dendrimers showed Soret and Q-band absorptions typical of free-base porphyrins. Preliminary steady-state fluorescence measurements of these dendrimers indicate quenching of the S1 state of the free-base porphyrin in all benzoquinone-containing dendrimers that is attributed to efficient electron-transfer from the excited porphyrin to the benzoquinone end-groups. The amount of fluorescence quenching was in good agreement with the number of benzoquinone groups at the dendrimer periphery and the distance between the porphyrin and benzoquinone groups as calculated by semiempirical (AM1) molecular orbital calculations.     

Helical supramolecules and fibers utilizing leucine zipper-displaying dendrimers

We describe a new family of discrete supramolecules comprising leucine-zipper peptides noncovalently assembled upon cognate leucine zippers fused to a dendrimer core. Circular dichroism and sedimentation equilibrium experiments clearly demonstrate that each leucine-zipper dendrimer (D-EZ4 or D-KZ4) can noncovalently display four leucine zippers on their surface that can be utilized for the multivalent display of protein cargo. Furthermore, we show that matched leucine-zipper dendrimers (D-EZ4/D-KZ4) can self-organize into fibers at neutral pH, providing a new scaffold for nanotechnology.     

Self-organizable vesicular columns assembled from polymers dendronized with semifluorinated Janus dendrimers act as reverse thermal actuators

The synthesis and structural analysis of polymers dendronized with self-assembling Janus dendrimers containing one fluorinated and one hydrogenated dendrons are reported. Janus dendrimers were attached to the polymer backbone both from the hydrogenated and from the fluorinated parts of the Janus dendrimer. Structural analysis of these dendronized polymers and of their precursors by a combination of differential scanning calorimetry, X-ray diffraction experiments on powder and oriented fibers, and electron density maps have demonstrated that in both cases the dendronized polymer consists of a vesicular columnar structure containing fluorinated alkyl groups on its periphery. This vesicular columnar structure is generated by a mechanism that involves the intramolecular assembly of the Janus dendrimers into tapered dendrons followed by the intramolecular self-assembly of the resulting dendronized polymer in a vesicular column. By contrast with conventional polymers dendronized with self-assembling tapered dendrons this new class of dendronized polymers acts as thermal actuators that decrease the length of the supramolecular column when the temperature is increased and therefore, are called reverse thermal actuators. A mechanism for this reversed process was proposed.     

Self-assembly of ionogenic surfactants during their interaction with poly(propylenimine) dendrimers

The structure of complexes formed by poly(propylenimine) dendrimers of five generations and anionic micelle-forming surfactants is studied by X-ray diffraction. It is shown that, in complexes of lower generation dendrimers, the lamellar packing of surfactants is dominant. In complexes formed by dendrimers of the fourth and fifth generations, packing typical of compact dendrimer molecules prevails. This packing can be attributed to the distorted dense packing of ball-like complex species. Structural models of complexes that allow for penetration of surfactants into the dendrimer molecule and the size ratio of the aliphatic radical of a surfactant and a dendrimer are advanced.     

Poly(propylene imine) dendrimers as plasticizers for polyvinyl chloride

Fourth and fifth generation poly(propylene imine) dendrimers and methyl and benzyl functionalized copolymers of these dendrimers are solution blended with poly(vinyl chloride) (PVC). The methyl‐derivative copolymer is observed to be dispersed in PVC as judged by optical and dynamic scanning calorimetry measurements. This dispersion leads to a substantial reduction in the glass transition temperature and a commensurate plasticization effect, demonstrating that functionalized dendrimer copolymers can successfully plasticize semicrystalline polymers. This plasticization is thought to occur as a result of additional free volume from the highly branched structure of the dendrimer. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1970–1975, 2007     

Thermally induced phase transition of carborane-functionalized aliphatic polyester dendrimers in aqueous media

Three recently reported aliphatic polyester dendrimers of generations 3, 4, and 5, having 4, 8, and 16 carborane cages within their interior, respectively, were found to exhibit thermally induced, reversible precipitation in aqueous solution. The cloud-point temperatures for these molecules were observed to be between 40 and 80 degrees C, depending on the dendrimer generation. The three dendrimers investigated have a hydroxyl-to-carborane ratio of 8:1, which provides the ideal balance between the hydrophobic interior and the hydrophilic exterior to enable the thermally induced phase transition to occur. It was found that repeated heating/cooling cycles resulted in a decreasing cloud-point temperature and increased dendrimer solubility. Additionally, the effect of pH on the cloud point was investigated, indicating no significant changes as long as the dendrimers remained stable. Size-exclusion chromatography indicated that dendrimer degradation was occurring at pH above 7.0.     

Physicochemical properties of quaternized poly(amidoamine) dendrimers with alkyl groups and of their mixtures with sodium dodecyl sulfate

The physicochemical properties of quaternized poly(amidoamine) dendrimers (generation 4) with methyl or octyl groups and of their mixtures with sodium dodecyl sulfate (SDS) in aqueous solutions have been investigated using several techniques including surface tension, fluorescence of pyrene, and dynamic light scattering. In the single systems of the dendrimers, the dendrimer with octyl groups shows lower surface tension and lower micropolarity than the dendrimer with methyl groups. The hydrodynamic radii of two quaternized poly(amidoamine) dendrimers are considerably large, indicating the formation of aggregates. In the mixed systems of quaternized poly(amidoamine) dendrimers and SDS, the dendrimer with octyl groups-SDS mixed system shows very low surface tension and low micropolarity even in the presence of extremely low SDS concentration compared to those of the dendrimer with methyl groups-SDS mixed system. Maximum turbidity for both systems is observed at around the mixed molar ratio of dendrimer:SDS=1:1.5 where distinct changes have also been confirmed by surface tension, fluorescence of pyrene, and electrical conductivity measurements.