Adsorption of nitrobenzene andn-pentanol from aqueous solution on hydrophilic and hydrophobic clay minerals

The sorption of nitrobenzene andn-pentanol from dilute aqueous solution on swelling clay minerals and their organophilized derivatives (organo clays) was studied. Adsorption excess isotherms were obtained by the immersion method. The basal spacings of the clay minerals were determined by X-ray diffraction measurements. By combining these two independent methods, composition and structure of the interlamellar space could be calculated. On the hydrophilic surface of montmorillonite negative adsorption of the organic component was observed at low molar fractions of nitrobenzene or pentanol, i.e., water was preferentially adsorbed. On organophilized montmorillonite and vermiculite adsorption of nitrobenzene and pentanol was positive over the whole range of liquid composition. The amount of interlamellar alkyl chains which is determined by the surface charge of clay mineral inversely affected the adsorption of both solutes.     

聚乙烯醇和丙烯酸-β-羟乙酯水凝胶的摩擦学特性

合成水凝胶是由水溶性单体聚合得到的轻度交联的高分子柔顺链网络 .高分子交联网络与水之间的相互作用决定着水凝胶的物理化学性质[1,2 ] .水凝胶常应用于生物医学材料和生物传感器等方面 .如接触眼镜的材料就常用甲基丙烯酸 -β-羟乙酯和聚乙烯醇 (PVA)为主要成分的水凝胶 ,所以对其摩擦性质的研究会丰富对生物医用材料的认识 .关于水凝胶的摩擦性质的研究 ,除 Osada等[3] 研究了聚乙烯醇及一些天然水凝胶在几牛顿到几十牛顿的负载下的摩擦行为外 ,尚少报道 .PVA水凝胶的结晶度对其性能影响甚大 ,但他们没有涉及结晶度与 PVA水凝胶的摩…     

Separation of patatins and protease inhibitors from potato fruit juice with clay minerals as cation exchangers

Potato fruit juice as a by-product of the starch industry contains proteins with interesting functionalities such as protease inhibitors or patatin with its high nutritional value. Due to their functional properties, these proteins are principally of industrial interest. A drawback for the application of these potato proteins is the separation and isolation under maintenance of the biological activity. So far, there are no methods in literature, which are satisfying concerning the costs or the separation performance. In this study, we show a chromatographic approach using natural clay minerals as cation exchangers to separate two protein fractions in potato fruit juice. Additionally, the content of glycoalkaloids naturally occurring in potatoes is significantly reduced in a single step together with the separation of the patatins and the protease inhibitors.     

Photocatalytic degradation of hydrocarbons by bentonite and TiO2 in aqueous suspensions containing surfactants

Organic substances (toluene, asphaltene dissolved in toluene) poorly soluble in water were solubilized by sodium dodecylsulfate (SDS) and the organic pollutants were mineralized together with the surfactants in diluted TiO₂ suspension by UV light. In concentrated aqueous suspension, crude oil was photodegraded on the surface of Na-bentonite and the photocatalyst TiO₂. Experiments have been carried out with Na-bentonite contaminated with crude oil mixed in a ratio of 1:1 with TiO₂ as well. The photooxidation processes were followed by total organic carbon content (TOC) and diffuse reflection infrared spectroscopy (DRIFT) measurements.     

Low-Hysteresis and High-Toughness Hydrogels Regulated by Porous Cationic Polymers: the Effect of Counteranions

Service life and range of polymer materials is heavily reliant on their elasticity and mechanical stability under long-term loading. Slippage of chain segments under load leads to significant hysteresis of the hydrogels, limiting its repeatability and mechanical stability. Achieving the desired elasticity exceeding that of rubber is a great challenge for hydrogels, particularly when subjected to large deformations. Here, low-hysteresis and high-toughness hydrogels were developed through controllable interactions of porous cationic polymers (PCPs) with adjustable counteranions, including reversible bonding of PCP frameworks/polymer segments (polyacrylamide, PAAm) and counteranions/PAAm. This strategy reduces chain segment slippage under load, endowing the PCP-based hydrogels (PCP-gels) with good elasticity under large deformations (7 % hysteresis at a strain ratio of 40). Furthermore, due to the enlarged chain segments entanglement by PCP, the PCP-gels exhibit large strain (13000 %), significantly enhanced toughness (68 MJ m⁻³), high fracture energy (43.1 kJ m⁻²), and fatigue resistance. The unique properties of these elastic PCP-gels have promising applications in the field of flexible sensors.     

芳香族小分子物质在表面活性剂溶液中的状态

阴、阳离子表面活性剂在水溶液中混合后很容易形成沉淀,因而以往在应用上将这两种表面活性剂视为配伍禁忌。但是最近几年,混合阴、阳离子表面活性剂水溶液理论性质的研究受到了一种程度的重视。研究发现,该混合体系具有与单纯的离子型表面活性剂或离子与非离子型表面活性剂混合物十分不同的性质,     

Radiolysis of carboxylic acids adsorbed in clay minerals

This research is aimed at studing the effect of ionizing radiation in an heterogeneous system formed by a carboxylic acid adsorbed in a clay mineral. The study is focussed to discriminate if the presence of a solid surface alters the formation and distribution of radiolytic products in relation to the radiolysis of the carboxylic acid without the surface (clay). The results showed that the radiolysis of the system clay-acid goes along a defined path rather than showing various pathways of decomposition as in the case of simple aqueous solutions. The main pathway was the decarboxylation of the target compound rather than condensation/dimerization reactions.     

Relation between immersion enthalpy and the acidity of clay pillared minerals

Total acidity for a series of modified clays obtained from a natural vermiculite is determined through temperature programmed desorption (TPD) using ammonia as probe molecule. Results obtained for the acidity range from 15.1 to 68.5 meq/100 g. Immersion enthalpies of the clays in benzene, water and aqueous solutions of NH₃ 0.058 M and NaHCO₃ 0.053 M are determined. The results obtained show that immersion enthalpies in benzene and water are between −6.26 and −25.6 J g⁻¹ and −2.10 and 5.55 J g⁻¹, respectively and are smaller than the values obtained for the immersion enthalpies in the solutions. Immersion enthalpy values in NH₃ solution are greater than the obtained using NaHCO₃. Linear relations between the total acidity of the clays and the immersion enthalpies in the basic solutions are determined. An interaction factor using ammonia is calculated since the relation between the immersion enthalpy in ammonia solution and in water and it may be deduced that the relation with the total acidity is of second order tendency between them.     

Incorporation of clay nano-particles in aqueous foams

During the process of crude oil/gasoline loading and storage, significant amounts of volatile organic compounds (VOCs) can be emitted to the environment. Stable aqueous foams can be spread as a flexible blanket on the top of the oil to control the VOC emission by providing a mass transfer barrier during the loading process. In this work, novel aqueous foams have been formulated by incorporating clay nano-particles in an aqueous solution of surfactants and polymers. The stability and mass transfer resistance of these foams were investigated at temperatures up to 125 F. In the presence of VOC, clay decreases the rate at which the liquid is drained out of the foam lamellae and increases the foam drainage half-life. These foams were found to be very stable in the presence of gasoline and crude oil and can last much longer than one day at the room temperature. The use of clay in the foam formulation reduces vapor diffusion through the lamellae and vapor emission through the foam column significantly for the first 10 h. Increase in temperature increases the rate of foam breakage due to higher water evaporation and lower liquid viscosity. In spite of this increase, the 0.5% polymer and 0.5% clay foam suppresses vapor emission from a gasoline longer than 3600, 1500 and 1100 min at 75 F, 105 F and 125 F, respectively. This foam also suppresses vapor emission from a crude oil longer than 4200, 2000 and 700 min at 75 F, 105 F and 125 F, respectively.     

Phase behavior in mixtures of cationic and anionic surfactants in aqueous solutions

Phase behavior of cationic/anionic surfactant mixtures of the same chain length (n=10, 12 or 14) strongly depends on the molar ratio and actual concentration of the surfactants. Precipitation of catanionic surfactant and mixed micelles formation are observed over the concentration range investigated. Coacervate and liquid crystals are found to coexist in the transition region from crystalline catanionic surfactant to mixed micelles.The addition of oppositely charged surfactant diminishes the surface charge density at the mixed micelle/solution interface and enhances the apparent degree of counterion dissociation from mixed micelles. Cationic surfactants have a greater tendency to be incorporated in mixed micelles than anionic ones.     

Removal of Cd(II), Cu(II), and Pb(II) by adsorption onto natural clay: a kinetic and thermodynamic study

In this work, we study the elimination of three bivalent metal ions (Cd²⁺, Cu²⁺, and Pb²⁺) by adsorption onto natural illitic clay (AM) collected from Marrakech region in Morocco. The characterization of the adsorbent was carried out by X-ray fluorescence, Fourier transform infrared spectroscopy and X-ray diffraction. The influence of physicochemical parameters on the clay adsorption capacity for ions Cd²⁺, Cu²⁺, and Pb²⁺, namely the adsorbent dose, the contact time, the initial pH imposed on the aqueous solution, the initial concentration of the metal solution and the temperature, was studied. The adsorption process is evaluated by different kinetic models such as the pseudo-first-order, pseudo-second-order, and Elovich. The adsorption mechanism was determined by the use of adsorption isotherms such as Langmuir, Freundlich, and Temkin models. Experiments have shown that heavy metals adsorption kinetics onto clay follows the same order, the pseudo-second order. The isotherms of adsorption of metal cations by AM clay are satisfactorily described by the Langmuir model and the maximum adsorption capacities obtained from the natural clay, using the Langmuir isotherm model equation, are 5.25, 13.41, and 15.90 mg/g, respectively for Cd(II), Cu(II), and Pb(II) ions. Adsorption of heavy metals on clay is a spontaneous and endothermic process characterized by a disorder of the medium. The values of ΔH are greater than 40 kJ/mol, which means that the interactions between clay and heavy metals are chemical in nature.     

Intercalation and exchange reactions of clay minerals and non-clay layer compounds

Presently, a large variety of layered materials are synthesized that are able to intercalate neutral guest molecules or to exchange inorganic and organic ions for interlayer ions. Several of these materials are also found as minerals.The intracrystalline reactivity of a few selected compounds will be described and compared to clay minerals:

Electron probe microanalysis of SiO2-coated minerals: Subsurface phases in quartz

Crystal fragments of biotite, garnet, and spinel were mounted together in one block which afterwards was sawn into several pieces; each piece was coated with SiO₂ of varying thickness, up to 7.9m. Electron probe microanalysis was carried out at various accelerating voltages of the major elements present, using the non-SiO₂-coated minerals as reference standard.Calibration curves, depth below the surface versus ratios of X-ray yields, have been established with the ultimate goal to use them for a (semi)-quantification of elements present in subsurface phases in quartz, a common host mineral in rocks.     

Synthesis of polymer particles and nanocapsules stabilized with PEO/PPO containing polymerizable surfactants in miniemulsion

We describe the miniemulsion polymerization of vinyl monomers stabilized in the presence of the polymerizable anionic surfactant Tego XP-1008 and the polymerizable nonionic surfactant Tego XP-1007. Different amounts of polymerizable surfactants and various types of initiators were used to investigate the size and the stability of the final latex particles by transmission electron microscopy and dynamic light-scattering measurements. The grafting of the polymerizable surfactants onto the surface of the latex particles was checked by NMR and XPS measurements and was found to be efficient. Finally, polymerizations of appropriate formulations containing divinylbenzene with the polymerizable surfactant Tego XP-1008 in the presence of a larger amount of hydrophobic agent produced nanocapsules.     

Wetting effect of aqueous binary mixed solutions of cationic and nonionic surfactants

Wetting of low-energy solid surfaces (polymers, hydrophobized glass) with aqueous solutions of binary mixtures of cationic and nonionic surfactants was investigated at molar fractions of the cationic surfactant of 0.2, 0.5, and 0.8. In a narrow concentration range, the non-additive effect of wetting was observed: wetting of the solid surfaces with solutions of the mixtures is better than that would be expected from the additive behavior of the components. The magnitude of the effect depends on the surface energy of the solid substrate, total surfactant concentration in a mixture, and molar fraction of the cationic component. The wetting effect of surfactant mixtures with respect to low-energy solid surfaces can be predicted using the surface tension isotherms.     

Adsorption characteristics of surfactants and phenol on modified zeolites from their aqueous solutions

Adsorption characteristics of anion-, cation- and nonion-type surfactants and phenol from their aqueous solution on Na-Y zeolites modified by SiCl₄ treatment and NA-ZSM-5 zeolites with several Si/Al ratios were measured. Surfactants used were sodium dodecylbenzenesulfonte (DBS), laurylpyridinium chloride (LPC), polyoxyethylenenonylphenylether (POENPE) and phenol.Adsorption of surfactants was enhanced by SiCl₄ treatment of Na-Y, which indicates an important role of the hydrophilic-hydrophobic character in the adsorption.Adsorption isotherms were in general of Langmuir type and adsorbed amount depended on the Al/(Si+Al) or Si/Al ratio of zeolite frameworks. In case of DBS adsorption of Na-ZSM-5 series, adsorption occurred only on the outer surface due to steric hindrance. LPC adsorption abilities were observed on even hydrophilic zeolites and were ascribed to ion exchange effect. In case of phenol adsorption on hydrophobic Na-Y, the adsorption isotherm was of Type V according to BDDT classification.     

Micelle polymers, polymer surfactants and dendrimers as pseudo-stationary phases in micellar electrokinetic chromatography

Several authors have recently reported the use of micelle polymers, polymer surfactants and dendrimers as pseudo-stationary phases in electrokinetic chromatography. These reports have demonstrated the effectiveness of these phases for a variety of applications, including the separation and analysis of hydrophobic compounds and chiral compounds and the application of mass spectrometric detection. This review covers developments in this area since the first introduction of polymeric pseudo-stationary phases in 1992. The use of polymeric micelles in electrokinetic chromatography is compared briefly with capillary electrochromatography. Some thoughts on future directions in this area are presented.     

Exfoliation of layered double hydroxides by use of zwitterionic surfactants in aqueous solution

A new strategy to exfoliate inorganic layered double hydroxide (LDH) solids to micrometer-sized and positively-charged nanosheets in aqueous solution is presented. The procedure involves intercalation of zwitterionic surfactant into the decarbonated LDH by ion exchange, followed by simply stirring the surfactant-intercalated LDH in an aqueous solution of pH?=?2. Since the charge of zwitterionic surfactant can be varied from anionic to cationic by adjusting the pH, the zwitterionic ions present in the interlayer were converted to cationic at pH?=?2, resulting in the exfoliation of LDH by electrostatic repulsion. The delaminated LDHs nanosheets were confirmed by XRD, TEM, and AFM analyses. This simple method did not need reflux at high temperature, overcame the drawback of using organic solvents, and even resulted in a stably colloidal dispersion of nanosheets.     

The interaction between triton X series surfactants and poly (ethylene glycol) in aqueous solutions

 A series of Triton X surfactants with different ethylene oxide chain length and poly(ethylene glycols) with different molecular weight were used, to find the effects of polymer chain length and size of the micelles on the cloud point of the surfactants. Two possible models are considered on the basis of cloud point changes of the solutions, to describe the polymer–surfactant interactions. One model considers that intra-chain micelles of polysoap are formed among the surfactant monomers and long polymer chains. The bridging attraction between two intra-chain micelles in such structures can enhance the collisions among the micelles, due to the exchange of amphiphilic monomers among the neighboring micelles. The other model suggests that flocculation depletion for the polymer chains exists between two regular micelles. This provides the driving force for the neighboring micelles to approach each other and destabilize the colloidal system. The flocculation effect is more significant for polymer with a long chain. Polymers with a shorter chain block the approach of the micelles, since there is no typical polymer–surfactant association formed but just simple small molecule associations in which the steric and solvation effects of the polymer chains make the inter-micelle interactions repulsive. Received: 19 August 1997 Accepted: 11 December 1997