Carbon in boron carbide: The crystal structure of B<Subscript>11.4</Subscript>C<Subscript>3.6</Subscript>

A single crystal of boron carbide obtained from a self-propagating high-temperature synthesis (SHS) product was studied by X-ray crystallography: B_11.4C_3.6, a = 5.594(2) Å, c = 11.977(7) Å, V = 324.6(7) ų, space group R3m, Z = 3, ρ_calcd = 2.56 g/cm³, R = 0.048. The content of carbon in the single crystal was estimated at ～24 at % from analysis of the unit cell parameters, bond lengths, and the volume of B_{12 ? x} C _x icosahedra, which demonstrated the possibility of obtaining by SHS carbon-rich boron carbide crystals due to the substitution of carbon atoms for boron atoms in icosahedra. Comparison of the X-ray crystallographic data for single crystals of boron carbide with the results of quantum-chemical calculations (an ab initio method (the 3–21G basis set) with geometry optimization) showed that the C-B-C group in a crystal has a nonlinear structure.     

Synthesis of IR phosphors based on germanatoborate Gd<Subscript>14</Subscript>Ge<Subscript>2</Subscript>B<Subscript>6</Subscript>O<Subscript>34</Subscript>

Processes of the formation of germanatoborates Gd₁₄B₆Ge₂O₃₄ and Gd_13.02Nd_0.98B₆Ge₂O₃₄ have been studied using different methods of synthesis (solid-state interaction, direct and inverse co-precipitation, self-propagating high-temperature synthesis (SHS)). It has been established that the synthesis of germanatoborates Gd₁₄B₆Ge₂O₃₄ and Gd_13.02Nd_0.98B₆Ge₂O₃₄ using the inverse precipitation and SHS methods occurs with the formation of an intermediate apatite-like phase, which upon heating to above 1100°С is reconstructed into the Ln₁₄B₆Ge₂O₃₄ (Ln = Gd, Nd) structure. The germanatoborates synthesized crystallize in the trigonal system (space group P3₁). The lattice parameters of Gd_13.02Nd_0.98B₆Ge₂O₃₄ are a = 9.746(4) Å and c = 25.795(13) Å. The thermal stability of the Gd₁₄B₆Ge₂O₃₄ and Gd_13.02Nd_0.98B₆Ge₂O₃₄ germanatoborates has been studied. The obtained materials of composition Gd_13.02Nd_0.98B₆Ge₂O₃₄ show luminescence properties and can be employed as infrared phosphors.     

Syntheses and Structure of Gd<Subscript>3</Subscript>Rh<Subscript>1.940(7)</Subscript>In<Subscript>4</Subscript>

Summary. The gadolinium–rhodium–indide Gd₃Rh_1.940(7)In₄ was prepared by arc-melting of the elements and subsequent annealing in a corundum crucible in a sealed silica tube. Gd₃Rh_1.940(7)In₄ adopts the hexagonal Lu₃Co_1.87In₄ type, space group , a = 781.4(5), c = 383.8(3) pm, wR2 = 0.0285, BASF = 0.375(1) (merohedric twinning via a twofold axis (xx0)), 648 F² values, 22 variables. The structure is derived from the well known ZrNiAl type through an ordering of rhodium and indium atoms on the Ni2 sites. The Rh/In ordering forces a reduction of the space group symmetry from to , leading to merohedric twinning for the investigated crystal. The Rh1 site has an occupancy of only 94.0(7)%. The investigated crystal had a composition Gd₃Rh_1.940(7)In₄. The main geometrical motif are three types of centered, tricapped trigonal prisms, i.e., [Rh1In2₆Gd₃], [Rh2Gd₆In2₃], and [In1Gd₆In2₃]. The shortest interatomic distances occur for Rh–In (276–296 pm) followed by In–In (297 pm). Together, the rhodium and indium atoms build up a three-dimensional [Rh_1.940(7)In₄] network, in which the gadolinium atoms fill slightly distorted pentagonal channels. The crystal chemistry of Gd₃Rh_1.940(7)In₄ is discussed on the basis of a group-subgroup scheme.     

Preparation of MB<Subscript>2</Subscript>/SiC and MB<Subscript>2</Subscript>/SiC-MC (M = Zr or Hf) powder composites which are promising materials for design of ultra-high-temperature ceramics

This survey shows the prospects of studies targeted at preparing MB₂/SiC and MB₂/SiC-MC (M = Zr or Hf) nanosized composite powders for use in the manufacture of ultra-high-temperature ceramics (UHTCs) and antioxidant protective coatings on C_f/C and C_f/SiC composites. The survey considers the specifics of various preparation methods, including sol-gel technology or precipitation followed by borothermic/ carbothermic reduction, self-propagating high-temperature synthesis (SHS), specifically variants combined with mechanochemical activation or spark plasma sintering (SPS), chemical modification of ZrB₂(HfB₂) powders with polycarbosilane followed by pyrolysis, and dispersion of appropriate ceramics with the stabilization of the slurry. The elemental and phase compositions, particle sizes, microstructures, and some other characteristics of the products reported in the related literature are summarized.     

Synthesis of dense ceramics of single-phase mayenite (Ca<Subscript>12</Subscript>Al<Subscript>14</Subscript>O<Subscript>32</Subscript>)O

The nanoporous material mayenite was synthesized by two methods: solid-phase and self-propagating high-temperature (combusting) (SHS) syntheses. The structure of the materials was determined by the X-ray diffraction analysis and IR and Raman spectroscopy.     

Structure and properties of Ce<Subscript>3</Subscript>Pd<Subscript>3</Subscript>Bi<Subscript>4</Subscript>, CePdBi,and CePd<Subscript>2</Subscript>Zn<Subscript>3</Subscript>

The intermetallic cerium compounds Ce₃-Pd₃Bi₄, CePdBi, and CePd₂Zn₃ were synthesized from the elements in sealed tantalum ampoules in an induction furnace. The compounds were characterized by X-ray powder and single crystal diffraction: CeCo₃B₂ type (ordered version of CaCu₅), P6/mmm, a = 538.4(4), c = 427.7(4) pm, wR2 = 0.0540, 115 F ² values, 9 variables for CePd₂Zn₃ and Y₃Au₃Sb₄ type, I \({\bar 4}\)3d, a = 1005.2(2) pm, w R2 = 0.0402, 264 F ² values, 9 variables for Ce₃Pd₃Bi₄, and MgAgAs type, a = 681.8(1) pm for CePdBi. The bismuthide structures are build up from three-dimensional networks of corner-sharing PdBi₄ tetrahedra with Pd–Bi distances of 281 (Ce₃Pd₃Bi₄) and 296?pm (CePdBi), respectively. The cerium atoms are located in larger voids of coordination number 12 (Ce₃Pd₃Bi₄) and 10 (CePdBi). In CePd₂Zn₃ the cerium atoms fill larger channels within the three-dimensional [Pd₂Zn₃] network with 18 (6 Pd + 12 Zn) nearest neighbors. The three compounds contain stable trivalent cerium with experimental magnetic moments of μ_eff = 2.70(2), 2.48(1), and 2.49(1) μ_B/Ce atom for CePd₂Zn₃, Ce₃Pd₃Bi₄, and CePdBi, respectively. Susceptibility and specific heat data gave no hint for magnetic ordering down to 2.1?K.     

Crystallization and Phase Stability of CaSO<Subscript>4</Subscript> and CaSO<Subscript>4</Subscript> – Based Salts

Summary.  Calcium sulfate occurs in nature in form of three different minerals distinguished by the degree of hydration: gypsum (CaSO₄·2H₂O), hemihydrate (CaSO₄·0.5H₂O) and anhydrite (CaSO₄). On the one hand the conversion of these phases into each other takes place in nature and on the other hand it represents the basis of gypsum-based building materials. The present paper reviews available phase diagram and crystallization kinetics information on the formation of calcium sulfate phases, including CaSO₄-based double salts and solid solutions. Uncertainties in the solubility diagram CaSO₄–H₂O due to slow crystallization kinetics particularly of anhydrite cause uncertainties in the stable branch of crystallization. Despite several attempts to fix the transition temperatures of gypsum–anhydrite and gypsum–hemihydrate by especially designed experiments or thermodynamic data analysis, they still vary within a range from 42–60°C and 80–110°C. Electrolyte solutions decrease the transition temperatures in dependence on water activity. Dry or wet dehydration of gypsum yields hemihydrates (α-, β-) with different thermal and re-hydration behaviour, the reason of which is still unclear. However, crystal morphology has a strong influence. Gypsum forms solid solutions by incorporating the ions HPO₄ ²⁻, HAsO₄ ²⁻, SeO₄ ²⁻, CrO₄ ²⁻, as well as ion combinations Na⁺(H₂PO₄)⁻ and Ln³⁺(PO₄)³⁻. The channel structure of calcium sulfate hemihydrate allows for more flexible ion substitutions. Its ion substituted phases and certain double salts of calcium sulfate seem to play an important role as intermediates in the conversion kinetics of gypsum into anhydrite or other anhydrous double salts in aqueous solutions. The same is true for the opposite process of anhydrite hydration to gypsum. Knowledge about stability ranges (temperature, composition) of double salts with alkaline and alkaline earth sulfates (esp. Na₂SO₄, K₂SO₄, MgSO₄, SrSO₄) under anhydrous and aqueous conditions is still very incomplete, despite some progress made for the systems Na₂SO₄–CaSO₄ and K₂SO₄–CaSO₄–H₂O. Corresponding author. E-mail: daniela.freyer@chemie.tu-freiberg.de Received December 17, 2002; accepted January 10, 2003 Published online April 3, 2003     

Preparation,Thermal Behaviour,and Crystal Structure of MgAl<Subscript>2</Subscript>F<Subscript>8</Subscript>(H<Subscript>2</Subscript>O)<Subscript>2</Subscript>

Summary.  Single crystals of MgAl₂F₈(H₂O)₂ have been obtained under hydrothermal conditions (250°C, 14 d) from a starting mixture of AlF₃ and MgAlF₅(H₂O)₂ in a 5% (w/w) HF solution. The crystal structure has been determined and refined from single crystal data (Fmmm (#69), Z = 4, a = 7.2691(7), b = 7.0954(16), c = 12.452(2) ?, 281 structure factors, 27 parameters, R(F ² > 2σ (F ²)) = 0.0282, wR(F ² all) = 0.0885). The obtained crystals were systematically twinned according to (010/100/001) as twinning matrix, reflecting the pseudo-tetragonal metric. The crystal structure is composed of perowskite-type layers built of corner sharing AlF₆ octahedra with an overall composition of AlF₄ ⁻ which are connected via common fluorine atoms of [MgF_4/2(H₂O)_2/1] octahedra. Group-subgroup relations of MgAl₂F₈(H₂O)₂ to WO₃(H₂O)_0.33 and to other M(II)M(III)₂ F₈(H₂O)₂ structures are briefly discussed. Above 570°C, MgAl₂F₈(H₂O)₂ decomposes under elimination of water into α-AlF₃, β-AlF₃, and MgF₂. Received October 29, 2001. Accepted (revised) December 6, 2001     

Alum (KAl(SO<Subscript>4</Subscript>)<Subscript>2</Subscript> · 12H<Subscript>2</Subscript>O) Catalyzed One-Pot Synthesis of Coumarins under Solvent-Free Conditions

Summary. Alum (KAl(SO₄)₂ · 12H₂O) is used as an efficient catalyst in the Pechmann condensation of phenol derivatives with β-keto esters leading to the formation of coumarins in excellent yields under solvent-free conditions. This methodology offers significant improvements for the synthesis of coumarins with regard to the yield of products, simplicity in operation, and green aspects by avoiding toxic catalysts and solvents.     

Crystal Structure and Superoxide Dismutase Activity of [Cu(ethylenediamine)<Subscript>2</Subscript>Cl][PF<Subscript>6</Subscript>]

Summary. The preparation, spectroscopic properties, and crystal structure of chlorobis(ethylenediamine)copper(II) hexafluorophosphate [Cu(en)₂Cl][PF₆], (en=ethylendiamine) are reported. The complex crystallizes in the monoclinic system, space group P2₁/c, with cell constants a=6.1488(9) Å, b=12.696(2) Å, c=17.7424(17) Å, =97.265(12)°, and Z=4. The copper(II) ion is coordinated to two bidentate en molecules, to one chlorine ion, and to a more distant fluorine atom of the PF₆ group, leaving the copper ion in a distorted octahedral coordination geometry. The superoxide dismutase mimetic activity of the complex was investigated using the indirect xanthine-xanthine oxidase- nitroblue tetrazolium method and compared to that of the native enzyme.     

Microstructure and Magnetic Behaviour of Nanosized Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> Powders and Polycrystalline Films

Summary.  The object of investigation were the magnetic interactions in nanostructured Fe₃O₄ assemblies of two kinds (powder and film) where particles of similar size present nearly uniform domains in a close to planar arrangement with spacings sufficient for magnetic interactions. We discuss the use of the soft-chemistry method, i.e. the modified ‘ferrite plating’ (MFP) technique, for the synthesis of polycrystalline films of magnetite with nanosized crystallites. Received October 22, 2001. Accepted January 21, 2002     

Preparation and Crystal Structure of MnBiS<Subscript>2</Subscript>Br

Summary. Black single crystals of MnBiS₂Br were obtained by the reaction of stoichiometric amounts of α-MnS, Bi, S, and BiBr₃ (3:2:3:1) at 600°C for 4 weeks. The compound crystallises in the monoclinic system, space group C2/m, with a = 12.767(2), b = 3.9468(4), c = 9.574(1) ?, β = 90.87(2)°, and Z = 4. The crystal structure refinement based on 720 reflections converged at R = 0.0244 and wR2 = 0.0579, respectively. MnBiS₂Br forms a layer structure consisting of MnS₆ octahedra, MnS₂Br₄ octahedra, and BiS₃₊₂ pyramids.     

Study on the cluster of floating dross before nucleating during hot-dipping process

At present, hot-dipping anticorrosion metalliccoating on the surface of steel base is the main methodto prevent atmospheric corrosion of steel. With thechange of atmospheric environment, the traditionalidea of hot-dipping pure Zn cladding already does not…     

Rare Earth-Rich Indides <Emphasis Type="Italic">RE</Emphasis><Subscript>5</Subscript>Pt<Subscript>2</Subscript>In<Subscript>4</Subscript> (<Emphasis Type="Italic">RE</Emphasis> = Sc,Y, La–Nd,Sm, Gd–Tm,Lu)

Summary. The isotypic indides RE ₅Pt₂In₄ (RE = Sc, Y, La–Nd, Sm, Gd–Tm, Lu) were synthesized by arc-melting of the elements and subsequent annealing. They were investigated via X-ray powder diffraction. Small single crystals of Gd₅Pt₂In₄ were grown via slow cooling and the structure was refined from X-ray single crystal diffractometer data: Pbam, a = 1819.2(9), b = 803.2(3), c = 367.6(2) pm, wR ² = 0.089, 893 F ² values and 36 parameters. The structure is an intergrowth variant of distorted trigonal and square prismatic slabs of compositions GdPt and GdIn. Together the platinum and indium atoms build up one-dimensional [Pt₂In₄] networks (292–333 pm Pt–In and 328–368 pm In–In) in an AA stacking sequence along the c axis. The gadolinium atoms fill distorted square and pentagonal prismatic cages between these networks with strong bonding to the platinum atoms.     

Synthesis,Crystal Structure and Raman Spectrum of Hydrazinium(+2) Fluoroarsenate(III) Fluoride,N<Subscript>2</Subscript>H<Subscript>6</Subscript>AsF<Subscript>4</Subscript>F

Summary.  Hydrazinium(+2) fluoroarsenate(III) fluoride was prepared by the reaction of hydrazinium(+2) fluoride and liquid arsenic trifluoride. N₂H₆AsF₄F is stable at 273 K, but decomposes slowly at room temperature. N₂H₆AsF₄F crystallizes in the orthorhombic space group Pnn2 with a = 774.0(2) pm, b = 1629.2(4) pm and c = 436.6(1) pm; V = 0.5506(3) nm³, Z = 4 and d _c  = 2.461 g cm⁻³. The structure consists of N₂H₆ ²⁺ cations, AsF₄ ⁻ anions, and F⁻ anions and is interconnected by a hydrogen bonding network. Distorted trigonal-bipyramidal AsF₄ ⁻ units are very weakly interconnected and form chains along the b axis. Bands in the Raman spectrum are assigned to the vibrations of N₂H₆ ⁺² cations and AsF₄ ⁻ anions. Corresponding author. E-mail: adolf.jesih@ijs.si Received April 18, 2002; accepted July 15, 2002     

Transmission Electron Microscopy Study on the Formation of Al<Subscript>18</Subscript>B<Subscript>4</Subscript>O<Subscript>33</Subscript> Whiskers

The aim of this paper is to report the results of a systematic high-resolution transmission electron microscopy study on Al₁₈B₄O₃₃. The fluxing agent method permits the formation of needle-shaped whiskers of Al₁₈B₄O₃₃, having sub-micron thickness with a tendency to come and fuse together. Amounts of 25% and 50% K₂SO₄, K₂CO₃ or KCl were used liked fluxing agents. Using this method, the optimum temperature for the synthesised compound was found to be 1000°C. The investigation techniques were X-ray diffraction and electron microscopy.     

Prediction of new A<Subscript>3+</Subscript>B<Subscript>3+</Subscript>C<Subscript>2+</Subscript>O<Subscript>4</Subscript> compounds

Hitherto unprepared ABCO₄ compounds (where A and B stand for tervalent metals (r _A ≥ r _B) and C stands for a divalent metal) are predicted. Criteria are found to predict the possibility for these compounds to crystallize in some type of structure (K₂NiF₄, CaFe₂O₄, YbFe₂O₄, or spinel) at room temperature and atmospheric pressure. The prediction is based only on the properties of elements and simple oxides. A special software system for computer-aided analysis of information is used for calculations involving pattern recognition based on use case.     

Selective Acetylation of Alcohols and Amines with Ethyl Acetate in the Presence of H<Subscript>6</Subscript>[PMo<Subscript>9</Subscript>V<Subscript>3</Subscript>O<Subscript>40</Subscript>] as the Catalyst

Summary. Acetylation of various alcohols and benzyl amine was tested in the presence of H₆[PMo₉V₃O₄₀], a mixed addenda heteropolyacid, in ethyl acetate under reflux condition. Phenols and anilines are not affected under the reaction conditions. Selective transestrification of alcohols can be achieved in the presence of phenol and aniline derivatives using this method.     

Crystal structures of Ti(NH<Subscript>4</Subscript>)<Subscript>2</Subscript>P<Subscript>4</Subscript>O<Subscript>13</Subscript> and Sn(NH<Subscript>4</Subscript>)<Subscript>2</Subscript>P<Subscript>4</Subscript>O<Subscript>13</Subscript>

The characteristics of crystal structures of the titanium(IV) diammonium (Ti(NH₄)₂P₄O₁₃) and tin(IV) diammonium (Sn(NH₄)₂P₄O₁₃) tetraphosphates, which are isostructural with similar silicon(IV) and germanium(IV) salts, have been obtained by the Rietveld method using X-ray powder diffraction data. The compounds crystallize in the triclinic system, space group P \(\overline 1 \), Z = 2, a = 15.0291(7) Å, b = 7.9236(4) Å, c = 5.0754(3) Å, α = 99.168(3)°, β = 97.059(3)°, γ = 83.459(3)° for Ti(NH₄)₂P₄O₁₃ and a = 15.1454(7) Å, b = 8.0103(5) Å, c = 5.1053(3) Å, α = 99.898(6)°, β = 96.806(3)°, γ = 83.881(4)° for Sn(NH₄)₂P₄O₁₃. The structure is refined in the isotropic approximation using the pseudo-Voigt function: R _p = 0.077, R _Bragg = 0.045, R _F = 0.057 for Ti(NH₄)₂P₄O₁₃; R _p = 0.082, R _Bragg = 0.044, R _F = 0.046 for Sn(NH₄)₂P₄O₁₃. The hydrogen atoms of the ammonium cations are placed in the calculated positions. A comparative analysis of the structures of the compounds of the M^IV(NH₄)₂P₄O₁₃ (M^IV = Si, Ge, Ti, Sn) series has been carried out.     

Photooxidation of Ethylbenzene with TiO<Subscript>2</Subscript> and Metal Coated TiO<Subscript>2</Subscript> and its Kinetics

Summary. Photooxidation of ethylbenzene with oxygen to give ethylbenzene hydroperoxide has been achieved in a stirred photochemical reactor that was cooled by a water system by irradiation with a 400W high-pressure mercury lamp and using TiO₂ powder and metal coated TiO₂. The effects of the amount of copper or silver coated on TiO₂ and of the temperature on the rate of oxidation have been investigated. It is suggested that thermal cleavage of the O–O bond and photochemically generated singlet oxygen should be considered as the initiating step in a radical chain mechanism. An optimum loading of 6% Ag or 4–5% Cu was observed for photooxidation of ethylbenzene.