“非保护型”金属胶体纳米簇形成机理研究

碱-乙二醇法制备的"非保护型"金属及合金纳米簇由表面吸附的溶剂分子和简单离子实现稳定化,它们被广泛用于制备高性能复相催化剂和研究复相催化剂中的尺寸、组成、载体表面基团以及修饰剂对催化性能的影响。关于此类非保护金属纳米簇的形成过程及机理的认识尚有待进一步深化。本文采用原位快速扫描X射线吸收精细结构谱(QXAFS)、原位紫外-可见(UV-Vis)吸收光谱、透射电子显微镜和动态光散射技术研究了碱-乙二醇法合成中非保护型金属胶体纳米簇的形成过程与机理。结果表明,在碱-乙二醇法合成非保护型Pt金属纳米簇的过程中,室温下即有部分Pt(IV)被还原至Pt(II)。随着反应温度的升高,OH-逐渐取代与Pt离子配位的Cl-,在Pt―Pt键形成之前,反应体系的UV-Vis吸收光谱中可观察到明显的纳米粒子的散射信号,原位QXAFS分析表明Pt纳米簇是由Pt氧化物纳米粒子还原所形成的;在Ru金属纳米簇的形成过程中,OH-首先取代了Ru Cl_3中的Cl~-,形成羟基配合物Ru(OH) _6~(3-),后者进一步缩合形成氧化钌纳米粒子,最终Ru金属纳米簇由乙二醇还原氧化钌纳米粒子形成。由于先形成了氧化物纳米粒子,后续的还原反应被限制在氧化物纳米粒子内,使最终得到的非保护型金属纳米簇具有尺寸小、分布窄的特点。本工作所获得的知识对发展高性能能源转化催化剂、精细化学合成催化剂、传感器等功能体系具有重要意义。     

超声化学制备单分散金属纳米钯

A simple sonochemical technique is used to synthesize palladium nanoparticles in a poly(ethylene glycol) (PEG) solvent at room temperature. The reaction based on chemical reduction of PdCl₂ by ascorbic acid (AA). The as prepared Pd nanoparticles are highly dispersed and uniform in size (with average size of ～20nm). The products were characterized by X-ray powder diffraction (XRD) and transmission electron microscopy (TEM).     

微乳液法制备纳米粒子

介绍了W／O型微乳液内超细颗粒的形成机理、制备的技术关键，综述了近年来国内外微乳法制备纳米粒子的最新进展。引用文献37篇。     

Preparation of Phenolic Resin／Silver Nanocomposites via in—situ Reduciton

Resol type phenolic resin/silver nanocompostie was prepared by in-sinu reduction method,in which the curing of phenolic resin and the formation of silvernano-particles took place simultaneously.The silver ions were reduced completely to silver nanoparticles,which were dispersed homogeneously in the resinmatrix with narrow size distribution.     

纳米过渡金属催化剂在有机合成中的应用进展

纳米尺度的催化剂具有高的比表面积和表面能, 其催化活性显著高于传统催化剂. 综述了近年来纳米级过渡金属催化剂在有机合成方面的应用, 并对其发展作了展望.     

聚苯胺/金属纳米粒子复合物的制备及性能

基于国内外最新研究文献及本课题组研究工作,从发展历史、制备方法、多功能性方面系统综述了近年来发展起来的聚苯胺/金属纳米粒子复合物。在聚苯胺基体中引入金属纳米粒子的方法可归纳为3大类：原位复合法、直接共混法和层层自组装法。所形成的有机聚苯胺和无机金属杂化复合物不仅能保留各自原有的特异性能,而且二组分之间还存在着相互协同作用,能够极大地提升基体聚苯胺材料的性能,电导率最高可提高100倍,电氧化催化电流最高可提高10倍。分散在聚苯胺膜中的极少量铂微粒就能使不锈钢板的腐蚀电位稳定在钝化区域。聚苯胺/金属纳米粒子复合物所表现出的突出的固有电导性、优异的反应催化性和极强的金属防腐性,使其跻身于为数不多的新型高性能复合材料之列,显示出了诱人的应用前景。     

高分子稳定纳米金属簇的合成及催化研究

对作者所在研究组在高分子稳定金属纳米簇催化领域的研究工作作出评述。     

基于金属纳米簇的荧光传感平台的最新研究进展

荧光纳米生物传感平台由于具有灵敏度高、选择性好、操作简单、成本低、实时监测等特点,吸引了广泛的关注.近年来,随着纳米技术的飞速发展,具有纳米结构的材料(纳米材料)在生物传感领域显示出独特的优势.与传统材料相比,纳米材料显示出独特的物化性质,如光学、电学、机械、催化和磁性等.金属(如Au、Ag、Cu及其合金)纳米簇(MN...     

S-型分级多孔CdS/UiO-66光催化剂的构建实现4-硝基苯胺的高效还原

金属有机框架(MOFs)材料因其高孔隙率特性在气体吸附分离、药物传递、催化等领域具有广泛应用.近年来,将功能化纳米颗粒(NPs)封装在MOFs中的研究在催化领域引起了科学家的兴趣.其中,较大比表面积的MOFs可以为NPs的分散和固定提供理想的平台,而NPs反过来可以为催化反应引入更多的活性位点,提高催化效率.然而,MOFs本身的孔隙常局限于微孔(<2 nm),这极大地限制了NPs在MOFs孔隙中的有效封装.因此,设计并制备含有介孔(2?50 nm)或大孔(>50 nm)的多级孔MOFs,揭示其孔径大小对复杂NPs/MOFs复合催化剂催化性能的影响具有重要意义.然而,具有不同孔径MOFs的可控制备具有巨大挑战性,MOFs孔径如何影响和调控NPs/MOFs复合材料催化活性是一个悬而未决的科学问题.本文结合金属离子刻蚀法和调控配体法设计了两种具有不同孔径(大孔和介孔)的UiO-66,并系统研究了孔径大小对CdS NPs的分布以及所形成的复合催化剂CdS/UiO-66的催化性能的影响及机制.我们首先阐明了UiO-66调控孔径后影响和修饰CdS NPs的空间分布:对于具有开放大孔结构的UiO-66纳米笼,CdS NPs倾向于自发沉积在UiO-66纳米笼内壁上.相比之下,CdS NPs则主要附着于介孔UiO-66的外表面.据此,具有大孔和介孔结构的CdS/UiO-66表现出不同的光催化性能.以光还原4-硝基苯胺反应为例,大孔CdS/UiO-66的反应速率常数是介孔和实心样品的3?13倍,且优于许多文献报道的CdS复合材料催化剂,表明大孔结构在制备高效复合催化材料上的潜在优势.通过光吸收能力、能级结构等计算表征,该催化剂的电子空穴对传输遵循S-型异质结光催化机制;大孔CdS/UiO-66具有较高光催化活性可归因于纳米笼对NPs的限域效应,即CdS被限制在UiO-66纳米笼内,缩短了催化剂与底物之间的电子传输距离;空心纳米笼结构则保护其内部的CdS NPs免受光腐蚀的影响,进而获得较高的催化效率和循环稳定性.可见,本文提出了一种结合离子刻蚀法和调控配体法获得具有不同孔径MOFs的有效策略,阐明了调控MOFs的孔径尺寸可以影响NPs的空间分布,是制约其性能的关键因素,有望为高效催化剂的设计及催化机制的研究提供新的依据.     

S-型分级多孔CdS/UiO-66光催化剂的构建实现4-硝基苯胺的高效还原（英文）

金属有机框架(MOFs)材料因其高孔隙率特性在气体吸附分离、药物传递、催化等领域具有广泛应用.近年来,将功能化纳米颗粒(NPs)封装在MOFs中的研究在催化领域引起了科学家的兴趣.其中,较大比表面积的MOFs可以为NPs的分散和固定提供理想的平台,而NPs反过来可以为催化反应引入更多的活性位点,提高催化效率.然而, MOFs本身的孔隙常局限于微孔(<2 nm),这极大地限制了NPs在MOFs孔隙中的有效封装.因此,设计并制备含有介孔(2-50 nm)或大孔(>50nm)的多级孔MOFs,揭示其孔径大小对复杂NPs/MOFs复合催化剂催化性能的影响具有重要意义.然而,具有不同孔径MOFs的可控制备具有巨大挑战性, MOFs孔径如何影响和调控NPs/MOFs复合材料催化活性是一个悬而未决的科学问题.本文结合金属离子刻蚀法和调控配体法设计了两种具有不同孔径(大孔和介孔)的UiO-66,并系统研究了孔径大小对Cd SNPs的分布以及所形成的复合催化剂CdS/UiO-66的催化性能的影响及机制.我们首先阐明了UiO-66调控孔径后影响和修饰Cd SNPs的空间分布:对于具有开放大孔结...     

利用手持技术改进测定乙醇分子结构实验

利用压强传感器代替排水集气法,改进测定乙醇分子结构实验的仪器装置,并探索最佳反应条件。另外,设计两个空白实验,结合压强变化曲线对实验误差进行相关讨论。     

光谱仪测试范围的扩展

由于石化行业的生产需要，其材质的使用具有多样性和广泛性，经常会出现顾客委托的测试样品的一个或几个元素跨越光谱仪现有测试程序测量范围的情况。本法通过对光谱仪测试原理的认识，根据光谱仪的测试能力及标样的采集，实现了一个或几个元素测量范围的扩展，并对其测量的影响因素进行了研究。     

Neutral diterpenoids of oleoresins of five species of conifers of Transcarpathia

The compositions of the neutral diterpenoids of the oleoresins of five species of conifers growing in the Transcarpathia have been studied. It has been found that the oleoresins ofAbies alba M.,Larix decidua M., andPicea excelsa L. contain more than 50% of neutral diterpenoids. The group and qualitative compositions of the oxygen-containing diterpenoids have been determined. In the oleoresins ofAbies alba,Picea excelsa, andPicea abies tertiary alcohols — cis-abienol and isocembrol — predominate, while inLarix decidua the main component is the hydroxy ester larixyl acetate. Primary alcohols related to the resin acids have been found in all the oleoresins investigated. Features of the distribution of diterpenoids according to the species of conifers have been revealed. The results obtained are necessary for the chemotaxonomy of conifers of the family Pinceae.Novosibirsk Institute of Organic Chemistry, Siberian Branch, Academy of Sciences of the USSR. Translated from Khimiya Prirodynkh Soedinenii, No. 6, pp. 812–816, November–December, 1988.     

Dichroism of absorption and polarization of phosphorescence of molecules of the closed form of nitrobenzospirothiopyran

The spectral-polarization characteristics of absorption and phosphorescence of molecules of the initial form of nitro-substituted indolinospirobenzothiopyran were studied in oriented polyethylene films and in solutions with different polarity. An oscillator model of the electron transitions responsible for the formation of absorption and luminescence spectra was suggested. It was established that the principal differences in the spectral and photophysical properties of the compound studied and its oxygen-containing analog are associated with the fact that the electronegativity of the S atom is lower than that of the O atom. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1143–1146, June, 1997.     

Influence of viscosity of medium on processes of oxygen quenching of excited states of mesoporphyrin

The oxygen quenching rate constants for singlet and triplet excited states of the dimethyl ester of mesoporphyrin IX increase with decreasing viscosity of the medium and reach a maximum at a viscosity of approximately 0.4 mPa·sec, after which the rate constants begin to decrease. The drop in rate constant with increasing fluidity of the medium may be related to a nonequilibrium character of the elementary act in the interaction of the reactants in the solvent cage. In viscous media such as isopropyl alcohol, isobutyl alcohol, and isoamyl alcohol, the reaction radius is greater than the sum of the radii of the reacting particles. The long-range character of these processes is due to the relatively weak dependence of the quenching probability on distance.Translated from Teoreticheskaya i Éksperimental'naya Khimiya, Vol. 25, No. 2, pp. 161–167, March–April, 1989.     

Determination of heats of detonation and influence of components of composite explosives on heats of detonation of high explosives

The heats of detonation of 20 simple high explosives and explosive mixtures were determined by means of an adiabatic detonation calorimeter designed by the authors. The results indicated that the performance of the instrument was reliable and the experimental data were very accurate. For explosive mixtures, there was a linear accumulative relationship between the heats of detonation of the explosive mixture and its components. Accordingly, the heats of detonation of explosive mixtures could be calculated directly from the heats of detonation of simple explosives and the characteristic heats of other components. The experiments showed that the gold or brass shell of the cylindrical charge could be substituted by a thick-walled porcelain shell, which had the advantage of cheapness.

     

物质分配系数的测定实验改进

实验教学目的是从解决实际问题出发,以实验技术训练和实验设计思想培养为目标。介绍了将单一的物质分配系数测定实验改进为综合实验,提高了实验效果及实验资源利用率。     

Calculation of enthalpies of hydrogenation of hydrocarbons

Sets of hydrogen molecule equivalents have been developed which permit the calculation of hydrogenation of different types of carbon-carbon bonds from ab initio total energies (3-21G and 6-31G* basis sets, and, to a more limited extent, for MP2/6-31G* data) of reactants and products. The calculated enthalpies of hydrogenation are in good agreement with experiment for unstrained molecules, with average errors on the order of 2 kcal/mol. The 6-31G* equivalents allow the enthalpies for strained molecules to be calculated accurately, but the 3-21G equivalents do not. The equivalents for both basis sets have been tested by calculating the enthalpies of hydrogenation of carbon-carbon bonds in nitrogen- and oxygen-containing organic molecules, free radicals, and classical carbocations. The results are in good agreement with experiment in most cases.