H(D)-atom yields in the quenching of Xe(6s[3/2]1) by methane, ethane, ethene, ethyne, and their deuterated isotopologues

The yields for the production of H(D) atoms in the reactions of Xe(6s[3/2]1) with simple hydrocarbons and their deuterated variants were determined. Xe(6s[32](1)) was produced by two-photon laser excitation of Xe(6p[1/2]0) followed by concomitant amplified spontaneous emission. H(D) atoms are detected using a vacuum-ultraviolet laser-induced fluorescence (LIF) technique. The H(D)-atom yields were evaluated from the LIF intensities and the overall rate constants for the quenching, which were determined from the temporal profile measurements of the resonance fluorescence from Xe(6s[3/2](1)). HD isotope effects were observed not only in the overall rate constants but also in the H(D)-atom yields. The yields for CH4, C2H4, and C2H2 were determined to be 0.89, 1.43, 1.03, respectively, while those for CD4, C2D4, and C2D2 were found to be smaller; 0.63, 0.86, and 0.79, respectively. The HD yield ratio for CH2D2 was 1.76. The presence of the isotope effects both in the rate constants and the yields suggests that electronic-to-electronic energy transfer processes and abstractive processes are competing.     

Polyhedral monocarbaborane chemistry. Some C-phenylated seven, eight, nine, ten, eleven and twelve-vertex species

Some synthetic and structural systematics for monocarbaboranes, using the C-phenylated motif as the example, are investigated. The 10-vertex [6-Ph-nido-6-CB(9)H(11)](-) anion 1, from reaction of PhCHO with B(10)H(14) in KOH/H(2)O, is a useful entry synthon into C-phenyl monocarbaborane chemistry. Treatment of anion 1 with Na/thf yields the 10-vertex [1-Ph-closo-1-CB(9)H(9)](-) anion 2a, whereas treatment of anion 1 with iodine in alkaline solution yields the isomeric 10-vertex [2-Ph-closo-2-CB(9)H(9)](-) anion 2b, which isomerises quantitatively to 2a on heating under reflux in DME. Thermolysis of anion 1 yields the 9-vertex [4-Ph-closo-4-CB(8)H(8)](-) anion 5, whereas treatment of anion 1 with FeCl(3)/HCl gives neutral 9-vertex [4-Ph-arachno-4-CB(8)H(13)] 3. Compound 3 gives neutral 9-vertex [1-Ph-nido-1-CB(8)H(11)] 4 in refluxing toluene, and gives the 7-vertex [2-Ph-closo-2-CB(6)H(6)](-) anion 7 and the 8-vertex [1-Ph-closo-1-CB(7)H(7)](-) anion 6 in refluxing toluene with NEt(3). Reaction of 1 with [BH(3)(thf)] yields the 11-vertex [7-Ph-nido-7-CB(10)H(12)](-) anion 8 which can be converted to the 12-vertex [1-Ph-closo-1-CB(11)H(11)](-) anion 10 using [BH(3)(SMe(2))]; alternatively, anion 1 yields anion 10 directly on treatment with [BH(3)(NEt(3))]. Treatment of anion 8 with I(2)/KOH yields the 11-vertex [2-Ph-closo-2-CB(10)H(10)](-) anion 9. The structures of anions 1, 2a, 2b, 5, 6, 7, 8, 9 and 10 have been established by single-crystal X-ray diffraction analyses of their [NEt(4)](+) salts, and those of neutral 3 and 4 estimated by DFT calculations at the B3LYP/6-31G* level; similar calculations have also been applied to the new anionic closo species 2a, 2b, 5, 6, 7, 9 and 10. Crystals of the [NEt(4)](+) salt of the [2-Ph-closo-2-CB(6)H(6)](-) anion 7 required synchrotron X-radiation for sufficient diffraction intensity for molecular-structure elucidation. The syntheses are in principle generally applicable to give extensive derivative C-aryl and C-alkyl chemistries.     

Three-Component Reaction of Triphenylphosphine,Dialkyl Acetylenedicarboxylates,and Heterocyclic Rings and the Related Iminophosphoranes

Crystalline phosphorus ylides are obtained in excellent yields from the 1:1:1 addition reaction of triphenylphosphine, dialkyl acetylenedicarboxylate, and NH acids, such as 2-aminothiazole and 2-aminobenzothiazole. These stabilized phosphoranes undergo a smooth intramolecular reaction in boiling toluene to produce aryliminophosphoranes in excellent yields.     

Lewis acid-mediated reactions of 1-cyclopropyl-2-arylethanone derivatives with allenic ester, ethyl acetoacetate, and methyl acrylate

TMSOTf-mediated reactions of 2-aryl-1-(1-phenylcyclopropyl)ethanones 1 with allenic esters afford a novel method for the synthesis of 6-methyl-3a,7-diaryl-3,3a-dihydro-2H-benzofuran-4-one derivatives 2 in moderate yields. In addition, we also found that TMSOTf-mediated reactions of 1-cyclopropyl-2-arylethanones with ethyl acetoacetate can provide the corresponding 2,3-dihydrobenzofuran-4-ol and dihydrofuro[2,3-h]chromen-2-one in moderate yields via a sequential reaction involving a nucleophilic ring-opening reaction of the cyclopropane by H2O, one intermolecular aldol type reaction and two intramolecular aldol type reactions, a cyclic transesterification, dehydration, and aromatization. Moreover, by using methyl acrylate to replace allenic ester, the corresponding 7-aryl-3,5,6,7-tetrahydro-2H-benzofuran-4-one and 5-aryl-3,5,6,7-tetrahydro-2 H-benzofuran-4-one can be formed in moderate to high yields in the presence of Bi(OTf)2Cl. Plausible reaction mechanisms have also been provided on the basis of control experiments.     

Novel and Efficient Insertions of Carbons Carrying O-, S-, and N-Linked Substituents: Synthesis of alpha-Alkoxyalkyl, alpha-(Alkylthio)alkyl, and alpha-(Carbazol-9-yl)alkyl Ketones

A wide variety of benzotriazolyl-stabilized anions 2, obtained by the lithiation of 1-(alpha-alkoxyalkyl)-, 1-[alpha-(alkylthio)alkyl]-, and 1-[alpha-(carbazol-9-yl)alkyl]benzotriazoles 1, on reaction with aliphatic and aromatic aldehydes and ketones, followed by rearrangement induced by heating in the presence of zinc bromide, furnish one-carbon-homologated alpha-alkoxyalkyl, alpha-(alkylthio)alkyl, and alpha-(carbazol-9-yl)alkyl ketones 4 in simple one-pot operations in good yields with excellent regioselectivity. In several alkoxymethylene insertions, intermediate 2-alkoxyoxiranes were separated in good yields, demonstrating the epoxide mechanism for the rearrangements and providing a facile approach to polysubstituted 2-alkoxyoxiranes, another class of important compounds.     

ClO radical yields in the reaction of O(1D) with Cl2, HCl, chloromethanes, and chlorofluoromethanes

Absolute ClO radical product yields in the gas-phase reactions of O((1)D) with Cl(2), HCl, CCl(4), CHCl(3), CH(2)Cl(2), CH(3)Cl, CFCl(3), CF(2)Cl(2), CF(3)Cl, CHFCl(2), and CHF(2)Cl are reported. Product yields were measured using pulsed-laser photolysis of O(3) to produce O((1)D) in the presence of excess reactant combined with dual wavelength differential cavity ring-down spectroscopic detection of the ClO radical. ClO radical absorption cross sections for the A(2)Π(v = 10) ← X(2)Π(v = 0) transition band head near 280 nm were determined between 200 and 296 K as part of this work. The ClO product yields obtained at room temperature were Cl(2) (0.77 ± 0.10), HCl (0.20 ± 0.04), CCl(4) (0.79 ± 0.04), CHCl(3) (0.77 ± 0.04), CH(2)Cl(2) (0.73 ± 0.04), CH(3)Cl (0.46 ± 0.06), CFCl(3) (0.79 ± 0.04), CF(2)Cl(2) (0.76 ± 0.06), CF(3)Cl (0.82 ± 0.06), CHFCl(2) (0.73 ± 0.05), and CHF(2)Cl (0.56 ± 0.03), where the quoted error limits are 2σ of the measurement precision. ClO product yields in the O((1)D) + Cl(2) and CFCl(3) reactions were found to be independent of temperature between 200 and 296 K, within the precision of the measurements. The absolute ClO yields obtained in this study are compared with previously reported values determined using relative and indirect methods.     

Donor-Acceptor Complexes in Copolymerization. XXVI. Effect of Solvent,Temperature, and Complexing Agent on the Polymerization of Comonomer Charge Transfer Complexes

The copolymerization of styrene with methyl methacrylate (S/MMA = 4/1) or acrylonitrile (S/AN = 1/1) in the presence of ethylaluminum sesquichloride (EASC) yields 1/1 copolymer in toluene or chlorobenzene. In chloroform the S-MMA-EASC polymerization yields 60/40 copolymer while the S-AN-EASC polymerization yields 1/1 copolymer. In the presence of EASC, styrene-α-chloroacrylonitrile yields 1/1 copolymer (DMF or DMSO), S-AN yields 1/1 copolymer (DMSO) or radical copolymer (DMF), S-MMA yields radical copolymer (DMF or DMSO), α-methylstyrene-AN yields radical copolymer (DMSO) or traces of copolymer (DMF), and α-MS-methacrylo-nitrile yields traces of copolymer (DMSO) or no copolymer (DMF). When zinc chloride is used as complexing agent in DMF or DMSO, none of the monomer pairs undergoes polymerization. However, radical catalyzed polymerization of isoprene-AN-ZnCl₂ in DMF yields 1/1 alternating copolymer. The copolymerization of S/MMA in the presence of EASC yields 1/1 alternating copolymer up to 100°C, while the copolymerization of S/AN deviates from 1/1 alternating copolymer above 50°C. The copolymerization of S/MMA deviates from 1/1 copolymer at MMA/EASC mole ratios above 20 while the copolymerization of S/AN deviates from 1/1 copolymer at MMA/EASC ratios above 50.     

Studies on 1, 2, 4-Benzothiadiazine 1, 1-Dioxide IX.1 Synthesis and Pharmacological Evaluation of 1, 2, 4-Benzothiadiazine 1, 1-Dioxide Biphenyl Tetrazoles as Angiotensin II Antagonists

In the course of our investigations on the development of cardiovascular agents, 3-butyl-2-[2′-(2H-tetrazol-5-yl)bipheny]-4-yl]methyl-2H-1, 2, 4-benzothiadiazine 1, 1-dioxide ( 2 ) was considered as a potential angiotensin II antagonist on the basis of bioisosteric replacement of the quinazoline ring of compound 1 with a 1, 2, 4-benzothiadiazine 1, 1-dioxide ring system. Alkylation of 6 with 4 afforded 7 and 8 in 24% and 28% yields, respectively. An attempt to remove the trityl group of compounds 7 and 8 under acidic condition gave the ring opened products 9 and 11 in 28% and 36% yields, respectively. However, compounds 2 and 10 were obtained in 46% and 85% yields when compounds 7 and 8 were refluxed in methanol. Preliminary assays of compounds 9 and 11 against angiotensin II receptors revealed weak activity with IC₅₀ values of 3.6 μM and 5.4 μM, respectively. Compound 10 (IC₅₀ = 87 nM) exhibited stronger binding affinity than compound 2 (IC₅₀ = 750 nM).     

Nickel-catalyzed highly regio- and stereoselective three-component assembly of allenes, aryl iodides, and alkenylzirconium reagents

Cyclohexylallene (1a) and alkenylzirconium reagent (n-PrCH=CHZr(Cp)2Cl) undergo three-component assembly with a variety of aromatic iodides (R1-I: R1 = 4-PhOMe, 4-PhCOMe, 4-PhMe, 2-thiophene, 2-PhOMe, 3-PhOMe, and 4-PhCO2Et) in the presence of NiCl2(PPh3)2 and zinc powder in THF at 50 degrees C to afford corresponding three-component assembly products in moderate to good yields with very high regio- and stereoselectivity. In addition to cyclohexylallene, also phenylallene, n-butylallene, cyclopentylallene, and cycloheptylallene underwent the three-component assembling reaction to furnish the corresponding 1,4-diene derivatives in good yields. Several alkenylzirconium reagents (R2CH=CHZr(Cp)2Cl: R2 = Ph (3b), t-Bu, TMS) were also employed for this three-component assembly. The nickel-catalyzed three-component assembly was further extended to vinyl iodides. Thus, 1a reacts with 3b and ethyl (Z)-3-iodoacrylate to produce a highly substituted triene in excellent yield. In all of these three-component assembly reactions, the E isomers were formed predominantly with E/Z ratios between 94/6 and 99/1. A possible mechanism for this highly regio- and stereoselective three-component assembly is proposed.     

Synthetic applications of 2-chlorooxiranes: preparation of thiazoles,dihydrothiazoles and selenazoles

The reaction of 2-chlorooxiranes 1 with thioamides and thioureas provides access to thiazoles, 4-hydroxy-4,5-dihydrothiazoles and 2-imino-2,3-dihydrothiazoles under mild conditions and with excellent yields. With 1 and selenourea, near quantitative yields of selenazoles are obtained.     

Controlled syntheses, characterization, and reactivity of neutral and anionic lanthanide amides supported by methylene-linked bis(phenolate) ligands

A series of neutral and anionic bis(phenolate) lanthanide amides were synthesized by general metathesis reactions, and their reactivity was explored. Protolytic ligand exchange reactions of MBMPH2 (MBMP = 2,2'-methylene bis(6-tert-butyl-4-methyl-phenolate)) with [Ln{N(TMS)2}2(mu-Cl)(THF)]2 (TMS = SiMe3) afforded the desired bridged bis(phenolate) lanthanide chlorides [(MBMP)Ln(mu-Cl)(THF)2]2 [Ln = Nd (1), Yb (2)] in high isolated yields. These lanthanide chlorides were found to be useful precursors for the synthesis of the corresponding lanthanide derivatives. Reactions of 1 and 2 with 2 equiv of NaN(TMS)2 in THF produced the expected neutral bis(phenolate) lanthanide amido complexes (MBMP)Ln[N(TMS)2](THF)2 [Ln = Nd (3), Yb (4)] in high yields. Whereas the reactions of 1 and 2 with LiN(TMS)2 in a 1:4 molar ratio gave the anionic bis(phenolate) lanthanide amides as discrete ion-pair complexes [Li(THF)4][(MBMP)Ln{N(TMS)2}2] [Ln = Nd (5), Yb (6)] in high isolated yields. Further study revealed that 5 and 6 can also be conveniently synthesized in high yields by the direct reactions of MBMPH2 with [Ln{N(TMS)2}2(mu-Cl)(THF)]2 in a 2:1 molar ratio, and then with 4 equiv of nBuLi. The reactivity of the neutral and anionic bis(phenolate) lanthanide amides was comparatively investigated. It was found that the insertion reactions of carbodiimide into the Ln-N bond of neutral lanthanide amido complexes 3 and 4 gave the anticipated bis(phenolate) lanthanide guanidinate complexes [(mu-O-MBMP)Nd{(iPrN)2CN(TMS)2}]2 (7) and (MBMP)Yb[(iPrN)2CN(TMS)2] (8), respectively, in high yields, whereas the similar reaction of carbodiimide with anionic amido complex 5 provided the unexpected ligand-redistributed products, and the homoleptic ion-pair bis(phenolate) neodymium complex [Li(DME)2(THF)][(MBMP)2Nd(THF)2] (9) was finally isolated as one of the products. Furthermore, the anionic bis(phenolate) lanthanide amides showed higher catalytic activity for the polymerization of epsilon-caprolactone than the neutral ones. All of the complexes were characterized with elemental analysis and IR spectra, and the definitive molecular structures of 1-3 and 5-9 were provided by single-crystal X-ray analyses.     

Chemical properties of N-Benzoylimines of quinazoline,quinoxaline, and phthalazine

Reactions of 1-benzoylimino-4-phenylquinazolinium (I), 1-benzoylimino-3-phenylquinox-alinium (II), and 3-benzoylimino-1-phenylphthalazinium betaines (III) with nucleophiles (hydroxide and cyanide ions) and 1,3-dipolarophiles (acetylenic esters and maleimides) were investigated. Heating I in aqueous alkali gave 3-phenylindazole, while similar treatment of II and III resulted in the formation of 1-benzoylamino-2-oxo-3-phenylquinoxaline and 2-benzoylamino-1-oxo-4-phenylphthalazine, respectively. Reaction of II and III with cyanide ion afforded 2-cyano-3-phenylquinoxaline and 1-cyano-4-phenylphthalazine in high yields, respectively. 1,3-Dipolar cycloaddition reactions of I and III with dimethyl acetylenedicarboxylate and ethyl propiolate afforded primary 1:1 cycloadducts, while the reaction of II with dimethyl acetylenedicarboxylate gave a product which is formed by ring opening of a primary adduct. The reaction of I-III with N-methyl and N-phenylmaleimides afforded the corresponding primary 1:1 cycloadducts in high yields, whose stereochemical assignment was made on the basis of nmr spectroscopy.     

Reaction between naphthols and dimethyl acetylenedicarboxylate in the presence of phosphites. Synthesis of stable oxa-2 lambda 5-phosphaphenanthrenes,and benzochromene derivatives

The reaction of dimethyl acetylenedicarboxylate (DMAD) with 2-naphthol in the presence of trimethyl or triphenyl phosphite leads to stable dimethyl oxa-2 lambda 5-phosphaphenanthrene derivatives in good yields. The reaction of DMAD and trimethyl phosphite in the presence of 1-naphthol or 8-hydroxyquinoline leads to dimethyl 2-(dimethoxyphosphoryl)-3-(1-hydroxy-2-naphthyl)succinate or dimethyl 2-(dimethoxyphosphoryl)-3-(8-hydroxyquinolin-7-yl)-succinate in excellent yields. Using triethyl phosphite and DMAD in the presence of 2-naphthol or 1-naphthol produces methyl 3-oxo-2,3-dihydro-1H-benzo[f]chromene-1-carboxylate or methyl 2-oxo-3,4-dihydro-2H-benzo[h]-chromene-4-carboxylate in excellent yields.     

A practical, fast, and high-yielding aziridination procedure using simple Cu(II) complexes containing N-donor pyridine-based ligands

Four-coordinate dichlorocopper(II) complexes derived from di(2-pyridyl)methanes or pyridine itself exhibit high catalytic activity in aziridination of regular olefins with PhINTs in weakly coordinating chloroform in the presence of 1-2 equiv of NaBArF4 (BArF4- = tetra[3,5-di(trifluoromethyl)phenyl]borate). High yields of aziridines exceeding 90% can be obtained with a 1:1 olefin/PhINTs ratio and 1-5 mol % catalyst loading for such reactive olefins as styrene, tri- and tetramethylethylene. For cis-cyclooctene, indene, methyl acrylate, methyl methacrylate, vinyl methyl ketone, tert-butylethylene, and neopentylethylene, as well as for 1-hexene and cyclopentene, yields of corresponding aziridines vary from 44% to 83%. The catalytic activity and efficiency of the reported copper complexes decrease moderately in the absence of NaBArF4.     

Oxydative Umwandlung von 17-Alkoxy-aspidospermidin-Derivaten in 17, 17-Dialkoxy-17, 18-dihydro-1, 18-dehydro-aspidospermidine

Treatment of 17-alkoxy-aspidospermidine derivatives with iodine and sodium hydroxide in methanolic or ethanolic solution yields the corresponding 17, 17-dialkoxy-17, 18-dihydro-1, 18-dehydro-aspidospermidine. Hence compounds 1 and 2 in methanol give the oxidation products 8 and 3 , respectively. In ethanol, 4 is converted to 5 , 2 to a mixture of 6 and 7 ; 4 in methanol yields a mixture of 6 and 7 in a different ratio.     

Pd(OH)2/C (Pearlman's catalyst): a highly active catalyst for Fukuyama,Sonogashira, and Suzuki coupling reactions

Treatment of thiol esters 1 with zinc reagent 2 in the presence of a small amount (相似文献   

Mild,fast, and stereoselective epoxide opening by ketone enolate anions. Application to synthesis of the norlignan curculigine

We report here that (1) enolate anions of five- to seven-membered cycloalkanones nucleophilically open cyclopentene and cyclohexene oxides in 57-76% yields and with 4-8:1 diastereoselectivity; (2) enolate anions formed regiospecifically via kinetic deprotonation of 2-cyclohexenone and 2-cycloheptenone open cyclohexene oxide in 60-62% yields and with 32-95:1 diastereoselectivity; and (3) an aryl methyl ketone enolate anion opens a monosubstituted epoxide as the key step in a short synthesis of the gamma-hydroxyketone (GHK) aglycon of the natural product curculigine.     

A general, efficient and stereospecific route to sphingosine, sphinganines, phytosphingosines and their analogs

Sphingosine, sphinganines and phytosphingosines and their analogs were synthesized by an aldol condensation between an iminoglycinate bearing a (+)-(1R,2R,5R)-2-hydroxy-3-pinanone group as chiral auxiliary and an appropriate aldehyde. All condensations proceeded with excellent enantioselectivity to generate the (2S,3R)-D-erythro structures in good yields.     

Synthesis of Dopamine,Rotigotin, Ladostigil,Rasagiline Analogues 2-Amino-4,5,6-trimethoxyindane, 1-Amino-5,6,7-trimethoxyindane,and Their Sulfamide Derivatives

Dopamine, rotigotin, ladostigil, and rasagiline analogues 2-amino-4,5,6-trimethoxyindane and 1-amino-5,6,7-trimethoxyindane were synthesized starting from 5,6,7-trimethoxyindan-1-one for the first time with 34% and 45% total yields. α-Carboxylation of indanone, reduction of ketone group with Et₃SiH, basic hydrolysis of ester, Curtius reaction of the acid, and addition of BnOH afforded the corresponding carbamate. Pd-C-catalyzed hydrogenolysis of carbamate and deprotonation of amine hydrochloride with NaOH gave the dopamine and rotigotin analogue 2-aminoindane. Reduction of 5,6,7-trimethoxyindan-1-one with NaBH₄ afforded the alcohol, which was then converted to the azide derivative via Mitsunobu reaction with diphenylphosphoryl azide; Pd-C catalyzed hydrogenation of the azide to the amine hydrochloride and then deprotonation of the amine hydrochloride with NaOH furnished the ladostigil and rasagiline analogue 1-aminoindane. These amines and BnOH were reacted with CSI to produce sulfamoyl carbamates, which were converted to sulfamides via Pd-C-catalyzed hydrogenolysis reaction with 20% and 25% total yields.     

Reaction of arynes, N-heteroaromatics and nitriles

Various N-heteroaromatic compounds, including pyridines, quinolines and isoquinoline, react with arynes and nitrile-containing solvents to give N-arylated 1,2-dihydro-2-pyridinyl, -2-quinolinyl and -1-isoquinolinyl nitriles in excellent yields.