High-pressure phase behaviour measurement of (CO2 + ethylene glycol dimethacrylate) and (CO2 + di-ethylene glycol dimethacrylate) binary mixture systems

Ethylene glycol dimethacrylate (EGDMA) and di-ethylene glycol dimethacrylate (DEGDMA) are two of the most wildly used di-functional monomers in the polymer industry. The EGDMA and DEGDMA are applied to cross-linking polymerisation for improving the physical and chemical properties of synthesized polymers. However, residual and unreacted EGDMA and DEGDMA applied to the synthesis of dental composite and super-absorption polymer poses a health threat. This problem can be solved by using supercritical CO₂, which has high diffusivity and causes polymer swelling. To design and operate the supercritical fluid extraction process using scCO₂, high pressure phase behaviour data are required. The pressure–composition (P–x) isotherms for the (CO₂ + EGDMA) and (CO₂ + DEGDMA) binary mixture systems were measured using the static method with a variable-volume view cell at temperatures ranging from (313.2 to 363.2) K. The experimental data correlation was performed using the Peng–Robinson equation of state (PR-EOS) and the Van der Waals one fluid mixing rule. The critical constants for the PR-EOS were estimated by the Joback method and the Marrero–Gani method. The acentric factor was estimated by the Lee–Kesler method. The Marrero–Gani method showed better correlation results than the Joback method and the EGDMA is more soluble in the supercritical carbon dioxide than the DEGDMA.     

Study of structural changes and mesomorphic transitions of oriented poly(ethylene therephthalate) fibers in supercritical CO2

Supercritical carbon dioxide (scCO₂), an environmentally friendly solvent, can change the fine structure of fibers depending on treatment temperature and pressure. Samples of partially oriented yarn (POY) PET fibers were uniaxially drawn below the glass transition temperature (T_g) and then exposed to scCO₂ under tension to induce morphological changes in them. The effects of draw ratio and scCO₂ exposure on the structural changes and mesomorphic transitions were evaluated. For this purpose, thermal characteristics of the structure, especially the rearrangement of polymer chains in the amorphous phase induced by cold-drawing and exposure to scCO₂, were evaluated by differential scanning calorimetry (DSC) and Fourier transform infrared (FTIR). The orientation factor of the fibers was measured using a polarizing microscope. The paracrystalline portion and the crystallite sizes of exposed samples were estimated by wide-angle X-ray diffraction. To evaluate the solubility of CO₂ molecules in the samples, density and fractional free volumes were also measured. A good correlation was obtained between the results obtained from various measurement techniques. Results showed that cold-drawing of PET fibers leads to a strain-induced crystallization and that exposure to scCO₂ changes the structure of the oriented PET samples. To investigate mesophase transitions, percentage of extended chains in the amorphous regions was calculated by analyzing the results of DSC and FTIR. Results showed that the amount of extended chains developing during cold-drawing in the amorphous regions decreased when exposed to scCO₂.     

Synthesis of poly[2-(perfluorooctyl)ethyl acrylate-<Emphasis Type="Italic">co</Emphasis>-poly(ethylene glycol) methacrylate] and its control of enzyme activity in supercritical carbon dioxide

Poly[2-(perfluorooctyl)ethyl acrylate-co-poly(ethylene glycol) methacrylate], P(POA-co-PEGm) was prepared as a new surfactant for scCO₂. The random copolymer was obtained by the radical polymerization of 2-(perfluorooctyl)ethyl acrylate (POA) and poly(ethylene glycol) methacrylate (PEGm) in DMF. The molar ratio of the POA and PEGm units in the copolymer was POA/PEGm = 0.972/0.028 by ¹H NMR. The molecular weight and molecular weight distribution were estimated by size exclusion chromatography to be Mn = 133,000 and Mw/Mn = 8.25, respectively. It was suggested that the copolymer formed micellar aggregates with the cores of the PEGm chains in scCO₂, based on the analyses of the copolymer in hexafluorobenzene by ¹H NMR and dynamic light scattering. The copolymer was soluble in scCO₂ and had a cloud point at a much higher pressure than the critical pressure. It was found that the copolymer solubilized CO₂-insoluble proteins such as bovine serum albumin and subtilisin Carlsberg in scCO₂. The solubility of the copolymer was not influenced by the presence of the proteins; however, the solubility decreased in the presence of a small amount of water along with the protein. The activity of the subtilisin slightly decreased when only placed in scCO₂, whereas a marked decrease in the activity was observed for the subtilisin in the presence of the copolymer in scCO₂. The subtilisin activity decreased as the CO₂ pressure increased.     

Neutron reflectivity study of glassy polymer brushes in density fluctuating supercritical carbon dioxide

By using in situ neutron reflectivity, we measured the swelling behavior of two types of polymer brushes, deuterated polystyrene with a trichlorosilane end group and deuterated polystyrene-block-poly(4-vinylpyridine) block copolymer, in supercritical carbon dioxide (scCO₂). The measurements were conducted in the pressure range of 0.1–20 MPa at 36 °C. The pressure dependence of the brush height clearly showed an anomalous peak at the density fluctuation ridge (pressure = 8.2 MPa) that defined the maximum long-range density fluctuation amplitude in the pressure–temperature phase diagram of carbon dioxide (CO₂). The density profile of the brush, which could be approximated by a simple step function, and the magnitude of the brush height both indicated that the solvent quality of scCO₂ for the deuterated polystyrene brushes was still poor even at the density fluctuation ridge. In addition, atomic force microscopy images for the frozen polystyrene brush prepared by the rapid drying of CO₂ showed a phase-separated structure, as predicted from the numerical calculations of Grest and Murat, as a function of the variable Nσ, where N is the polymerization index and σ is the grafting density. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 3282–3289, 2004     

Partitioning effect of nitrogen catalyst into polymerizing particles on dispersion reversible chain transfer catalyzed polymerization (dispersion RTCP) of methyl methacrylate in supercritical carbon dioxide and organic solvents

Reversible chain transfer catalyzed polymerization (RTCP) in dispersion polymerization system (dispersion RTCP) of methyl methacrylate (MMA) was performed with N‐iodosuccimide (NIS) as a nitrogen catalyst in supercritical carbon dioxide (scCO₂). The solubility of NIS in scCO₂ can be controlled by tuning the pressure, and this led to promote NIS partitioning into polymerizing particles. As a result, the molecular weight distribution control was successfully improved by decreasing the NIS solubility in the medium by tuning the scCO₂ at a low pressure of 20 MPa. On the other hand, at the same NIS concentration, a solution RTCP of MMA in toluene as a homogeneous polymerization system did not proceed with a controlled/living manner. The importance of NIS partitioning into the polymerizing particles was also confirmed in hexane as well as scCO₂ medium. From these results, it was clarified that the NIS catalyst partitioning into the polymerizing particles as main polymerization loci is a key factor to control the molecular weight distribution in the dispersion RTCP of MMA in scCO₂. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 613–620     

Effect of supercritical CO2 on the copolymerization behavior of cyclohexene oxide/CO2 and copolymer properties with DMC/Salen‐Co(III) catalyst system

The copolymerization of cyclohexene oxide (CHO) and carbon dioxide (CO₂) was carried out under supercritical CO₂ (scCO₂) conditions to afford poly (cyclohexene carbonate) (PCHC) in high yield. The scCO₂ provided not only the C1 feedstock but also proved to be a very efficient solvent and processing aid for this copolymerization system. Double metal cyanide (DMC) and salen‐Co(III) catalysts were employed, demonstrating excellent CO₂/CHO copolymerization with high yield and high selectivity. Surprisingly, our use of scCO₂ was found to significantly enhance the copolymerization efficiency and the quality of the final polymer product. Thermally stable and high molecular weight (MW) copolymers were successfully obtained. Optimization led to excellent catalyst yield (656 wt/wt, polymer/catalyst) and selectivity (over 96% toward polycarbonate) that were significantly beyond what could be achieved in conventional solvents. Moreover, detailed thermal analyses demonstrated that the PCHC copolymer produced in scCO₂ exhibited higher glass transition temperatures (T_g ～ 114 °C) compared to polymer formed in dense phase CO₂ (T_g ～ 77 °C), and hence good thermal stability. Additionally, residual catalyst could be removed from the final polymer using scCO₂, pointing toward a green method that avoids the use of conventional volatile organic‐based solvents for both synthesis and work‐up. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2785–2793     

傅立叶变换红外光谱技术在超临界CO2作用聚合物体系中的应用

超临界CO₂（scCO₂）作为一种物理化学性质优良、具有高扩散速率及优良溶解性能的溶剂,在科学研究及工业生产中广受青睐。将scCO₂应用于聚合物体系中,CO₂ 与聚合物间特殊的相互作用有利于CO₂分子在聚合物中的吸附与扩散。同时通过CO₂的吸附及其对聚合物的溶胀和塑化作用,聚合物所处微观化学环境以及整体结构性质会发生一定的变化。由于傅立叶变换红外光谱（FTIR）技术能够有效地考察化学环境变化对分子结构造成的影响,这一表征技术在超临界CO₂作用体系中广为应用。本文主要选取了近年来利用FTIR技术考察scCO₂作用于聚合物体系的一些实例,从CO₂-聚合物相互作用机理,scCO₂对聚合物或生物大分子的加工过程的影响两方面,阐述了利用红外光谱技术在scCO₂作用体系中的应用以及前景。     

Synthesis of cross-linked poly (<Emphasis Type="Italic">N</Emphasis>-isopropylacrylamide) microparticles in supercritical carbon dioxide

Herein, we report a new method that has been developed to prepare thermoresponsive polymers. The white, dry, fine powders were obtained directly from cross-linking polymerization of N-isopropylacrylamide in supercritical carbon dioxide (scCO₂) with N,N-methylenebisacrylamide as a cross-linker. The effects of the reaction pressure and time as well as the initial concentrations of the initiator, cross-linker, and monomer on the yield and morphology of the resulting polymer were investigated systematically. The polymer yield was increased with the concentrations of the cross-linker, monomer, and reaction time. Under the condition of using higher cross-linker concentrations, the cross-linked poly (N-isopropylacrylamide) microparticles with diameters of 50 nm were generated in scCO₂ in high-yield and short reaction times. These results suggest that the synthetic method using scCO₂ can be used to prepare biomedical materials such as the controlled drug-release system.     

Dispersion polymerization of MMA in supercritical CO2 stabilized by random copolymers of 1H,1H–perfluorooctyl methacrylate and 2‐(dimethylaminoethyl methacrylate)

A series of random copolymers, composed of 1H,1H‐perfluorooctyl methacrylate (FOMA) and 2‐dimethylaminoethyl methacrylate (DMAEMA) were prepared as stabilizers for the dispersion polymerization of methyl methacrylate in supercritical CO₂ (scCO₂). Free‐flowing, spherical poly(methyl methacrylate) (PMMA) particles were produced in high yield by the effective stabilization of poly(FOMA‐co‐DMAEMA) containing 34–67 w/w % (15–41 m/m %) FOMA structural units. Less stabilized but micron‐sized discrete particles could be obtained even with 25 w/w % (10 m/m %) FOMA stabilizer. The result showed that the composition of copolymeric stabilizers had a dramatic effect on the size and morphology of PMMA. The particle size was controllable with the surfactant concentration. The effect of the monomer concentration and the initial pressure on the polymerization was also investigated. The dry polymer powder obtained from dispersion polymerization could be redispersed to form stable aqueous latexes in an acidic buffered solution (pH = 2.1) by an electrostatic stabilization mechanism due to the ionization of DMAEMA units in the stabilizer. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1365–1375, 2008     

交联剂对无皂P(MMA-EA-MAA)种子聚合乳胶粒成孔的影响

采用完全无皂种子乳液聚合技术合成了粒径窄分布的P(MMA-EA-MAA)乳胶粒,通过对上述胶乳进行碱处理,制备出了具有空腔结构和多孔结构的聚合物乳胶粒,研究了交联剂的种类和用量对聚合过程、胶粒特性及胶粒结构形态的影响.结果表明,体系中加入交联剂后,单体转化率都有不同程度的提高;随交联剂用量的增加,乳胶粒粒径略有减小,交联剂用量较高时,乳胶粒粒径分布加宽;二乙烯基苯(DVB)的交联效率稍高于双甲基丙烯酸乙二醇酯(EGDMA);不加入交联剂及EGDMA用量低于0.5%时,处理后乳胶粒呈空腔结构,加入DVB及EGDMA用量高于1.0%时,处理后乳胶粒呈多孔结构,并且乳胶粒体积增量随交联剂用量的增加而减小.     

In situ measurement of the glass transition temperature of polymers with compressed fluid diluents

In situ measurement of the creep compliance of poly(methyl methacrylate) (PMMA) and poly(ethyl methacrylate) (PEMA), equilibrated with a pressurized CO₂ phase, is used to determine the glass transition temperature. Corrections due to dilation of the polymer by CO₂ as well as the buoyancy are assessed. Both polymer systems exhibit a recently discovered phenomenon, retrograde vitrification, in which a liquid polymer becomes a glass with an increase in temperature. The experimental results are predicted semi-quantitatively in terms of the temperature and pressure effects on the solubility of the compressed fluid in the polymer. © 1994 John Wiley & Sons, Inc.     

Microgels containing methacrylic acid: effects of composition on pH-triggered swelling and gelation behaviours

pH-responsive microgels are cross-linked polymer colloids that swell when the pH approaches the pK _a of the particles. In this work, we present a comprehensive investigation of pH-triggered particle swelling and gel formation for a range of microgels containing methacrylic acid (MAA). The microgels investigated have the general composition poly(A/MAA/X), where A and X are the primary co-monomer and cross-linking monomer, respectively. The primary co-monomers were methyl methacrylate (MMA), ethyl acrylate (EA) or butyl methacrylate. The cross-linking monomers were either butanediol diacrylate (BDDA) or ethyleneglycol dimethacrylate (EGDMA). The microgels were studied using scanning electron microscopy, photon correlation spectroscopy (PCS) and dynamic rheology measurements. Gel phase diagrams were also constructed. The particles swelled significantly at pH values greater than approximately 6.0. It was shown that poly(EA/MAA/X) microgels swelled more strongly than poly(MMA/MAA/X) microgels. Furthermore, greater swelling occurred for particles prepared using EGDMA than BDDA. Concentrated dispersions of all the microgels studied exhibited pH-triggered gel formation. It was found that the fluid-to-gel transitions for the majority of the six microgel dispersions investigated could be explained using PCS data. In those cases, gelation was attributed to a colloidal glass transition. Interestingly, the microgels that were considered to have the highest hydrophobic content gelation occurred under conditions where little particle swelling was evident from PCS. The data presented show that gelled poly(EA/MAA/BDDA) and poly(MMA/MAA/EGDMA) microgel dispersions have the strongest elasticities at pH = 7.     

Preparation of silica/perfluoroalkyl methacrylate polymer inorganic/organic particles in supercritical carbon dioxide

Silica/perfluoroalkyl methacrylate polymer (PHDFDMA) particles were prepared using various types of silica by polymerization in supercritical carbon dioxide. There are three steps in the fabrication of inorganic/organic hybrid composites: silane treatment, polymerization, and soxhlet extraction. After these steps, we observed the morphology of silica/PHDFDMA particles using field emission scanning electron microscope and transmission electron microscope. From these analyses, we can confirm that the silica/PHDFDMA core/shell particles were obtained when we used Ludox and silica gel as a silica template. On the other hand, core/shell particles were not formed when using fused silica and precipitated silica. In addition, to confirm the amount of polymer on silica, we performed an analysis using thermogravimetric analysis and electron probe micro-analyzer. In this case, PHDFDMA was approximately 20 wt.% on the silica gel and 40 wt.% on the Ludox, respectively. When using fused silica and precipitated silica as a template, amount of PHDFDMA on silica was maximum 5 wt.% and over 40 wt.%, respectively. From these results, to obtain enough PHDFDMA encapsulated silica particle, colloidal silica, Ludox is the best template in four different types of silica.     

Effect of Stabilizer Concentration,Pressure and Temperature on Polymerization Rate and Molecular Weight Development in RAFT Polymerization of MMA in scCO2

Summary: An experimental study on the effect of stabilizer concentration, pressure (100 to 500 bar), and temperature (65 to 85 °C) on polymerization rate and molecular weight development in the reversible addition-fragmentation chain transfer (RAFT) polymerization of methyl methacrylate (MMA) in supercritical carbon dioxide (scCO₂) is presented. AIBN was used as initiator, S-Thiobenzoyl thioglycolic acid as RAFT agent, and Krytox® 257 FSL as stabilizer. It was observed that the polymerization proceeded in a controlled manner. High conversions can be reached in reasonable times. Fairly low polydispersities (around 1.2) are possible if either pressure or temperature are increased, but better results are obtained if the polymerization proceeds at the upper temperature value of 85 °C.     

Dispersion polymerization of 2-hydroxyethyl methacrylate (HEMA) using siloxane-based surfactant in supercritical carbon dioxide and in compressed liquid dimethyl ether

The free radical dispersion polymerization of 2-hydroxyethyl methacrylate (HEMA) has been carried out in supercritical carbon dioxide (scCO₂) and compressed liquid DME using several surfactants. The polymerization are performed in the presence of fluorine-based poly(3,3,4,4,5,5,6,6,7,7,8,8,9,9,10,10,10-heptadecafluorodecyl acrylate) [poly(HDFDA)], poly(3,3,4,4,5,5,6,6,7,7,8,8,9,9,10,10,10-heptadecafluorodecyl methacrylate) [poly(HDFDMA)], or poly(HDFDMA-co-MMA) and siloxane-based PDMS-g-pyrrolidonecarboxylic acid (Monasil PCA™) or PDMS modified surfactants, SS-5050K™ and KF6017™ as polymerization surfactants. When scCO₂ was used as a polymerization medium, the PHEMA were heavily agglomerated. However, the spherical and relatively uniform poly(2-hydroxyethyl methacrylate) (PHEMA) particles could be produced even at 20 bar, with a narrow particle size distribution in compressed liquid DME. It was observed that fluorine-based surfactants were not a good surfactant as siloxane-based surfactants for the dispersion polymerization of HEMA. The average particle size of PHEMA was shown to be dependent on the type of the surfactant, the amount of the surfactant and initiator added to the system. The effect of two continuous phases, which are scCO₂ and compressed liquid DME, as a polymerization medium, the surfactant types and the concentration, initiator concentration, and monomer concentration on the morphology and size of the polymer particles was also investigated.     

Synthesis and characterization of oxazoline-functional polymer particles by free radical nonaqueous dispersion polymerization

A novel oxazoline-functional methacrylate was prepared and employed as comonomer to produce nonaqueous dispersions of oxazoline-functional polymer particles. In nonaqueous free radical dispersion copolymerization of methylmethacrylate in the presence of oxazoline-functional methacrylate, ethyleneglycoldimethacrylate crosslinking agent, AIBN initiator, and polystyrene-block-poly(ethene-alt-propene) dispersing agent, the average polymer particle size, varying between 100 and 500 nm, was controlled by the dispersing agent contents. According to titration with HClO₄ all oxazoline groups regardless of their location at particle surface or bulk, were accessible. Glass transition temperature decreased from 120 to 0°C when oxazoline functional methacrylate was increased from 0 to 95 mol %. As imaged by atomic force microscopy incorporation of the new oxazoline-functional methacrylate improved film formation. Oxazoline-functional polymer particles were easy to redisperse in a variety of other diluents. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 2539–2548, 1997     

In situ preparation of cross‐linked polystyrene/poly(methyl methacrylate) blend foams with a bimodal cellular structure

In situ preparation of a cross‐linked poly(methyl methacrylate) (PMMA) and polystyrene (PS) blend and its foaming were investigated for creating a bimodal cellular structure in the foam. Methyl methacrylate (MMA) monomer was dissolved in PS under supercritical CO₂ at a temperature of 60 °C and a pressure of 8 MPa, and the polymerization of MMA was conducted at 100 °C and 8 MPa CO₂, with a cross‐linking agent in PS. The blend was successively foamed by depressurizing the CO₂. CO₂ played the roles of plasticizing the PS and enhancing the monomer dispersion in PS during the sorption process and as a physical blowing agent in the foaming process. The cross‐linking agent was used for controlling the elasticity of polymerized PMMA domains and differentiating their elasticity from that of the PS matrix. The difference in elasticity delayed the bubble nucleation in the PMMA domains from that in the PS and made the cell size bimodal distribution, in which the smaller cells ranging from 10 to 30 µm in diameter were located in the wall of large cells of 200–400 µm in diameter. The effects of the initial MMA content, the concentration of cross‐linking agent, and the depressurization rate on the bimodal cell structure and bulk foam density were investigated. Copyright © 2011 John Wiley & Sons, Ltd.     

Precipitation polymerization of 2‐hydroxyethyl methacrylate in supercritical carbon dioxide

We report the successful precipitation polymerization of 2‐hydroxyethyl methacrylate (HEMA) in supercritical carbon dioxide (scCO₂) at pressures ranging from 15 to 27 MPa utilizing 2, 2′‐azobisisobutyronitrile (AIBN) as a free radical initiator. The effects of the reaction pressure, initiator concentration, monomer concentration, reaction temperature, and reaction time were investigated. Analyses by scanning electron microscopy (SEM) indicated that in all reaction conditions, polymerization in the absence of stabilizer led to the formation of large aggregates of partially coalesced particles, with diameters of approximate 1–10 µm. Analyses by gel permeation chromatography (GPC) indicated that for the reaction pressure, initiator concentration, monomer concentration, reaction temperature, and reaction time studied there are appreciable effect on product molecular weight. Copyright © 2011 John Wiley & Sons, Ltd.     

One‐shot synthesis of high molar mass polyurethane in supercritical carbon dioxide

Well‐defined polyurethane–polydimethylsiloxane particles of tunable diameter in the range of 0.5–20 μm were synthesized in “one‐shot” by step‐growth polymerization using supercritical carbon dioxide (scCO₂) as a dispersant medium. Polymerizations were carried out at 60 °C and above 25 MPa, after the solubility of each reactant in scCO₂ has been determined in its typical reaction concentration. The synthesis of such copolymers was achieved by polyaddition between short aliphatic diols, that is, ethylene glycol, 1,4‐butanediol (BD) or polyethylene oxide (M_n = 200 g mol^?1), and tolylene‐1,4‐di‐isocyanate (TDI) in the presence of mono or di‐isocyanate‐terminated polydimethylsiloxane (PDMS) as reactive stabilizers and dibutyltin dilaurate as a catalyst. The nature of the diol used as well as the functionality of the reactive stabilizer incorporated was found to have a dramatic effect on the molar mass and the morphology of the resulting product. Thus, copolymers obtained from the polyaddition of BD and TDI in the presence of di‐isocyanate‐terminated PDMS exhibit molar mass up to 90,000 g mol^?1. Thermal behaviors of copolymers were also examined by differential scanning calorimetry. All samples exhibited only one glass transition temperature (T_g) and were found to be totally amorphous. A logical decrease of the T_g was observed as the length of the diol incorporated increased, that is, as the density of urethane linkages within the polymer decreased. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5649–5661, 2007     

Thermoresponsive hyperbranched polymers via In Situ RAFT copolymerization of peg‐based monomethacrylate and dimethacrylate monomers

Here we report the preparation of PEG‐based thermoresponsive hyperbranched polymers via a facile in situ reversible addition‐fragmentation chain transfer (RAFT) copolymerization using bis(thiobenzoyl) disulphide to form 2‐cyanoprop‐2‐yl dithiobenzoate in situ. This novel one‐pot in situ RAFT approach was studied firstly using methyl methacrylate (MMA) monomer, then was used to prepare thermoresponsive hyperbranched polymers by copolymerization of poly(ethylene glycol) methyl ether methacrylate (PEGMEMA, M_n = 475), poly(propylene glycol) methacrylate (PPGMA, M_n = 375) and up to 30 % of ethylene glycol dimethacrylate (EGDMA) as the branching agent. The resultant PEGMEMA‐PPGMA‐EGDMA copolymers from in situ RAFT were characterized by Gel Permeation Chromatography (GPC) and ¹H‐NMR analysis. The results confirmed the copolymers with multiple methacrylate groups and hyperbranched structure as well as RAFT functional residues. These water‐soluble copolymers with tailored compositions demonstrated tuneable lower critical solution temperature (LCST) from 22 °C to 32 °C. The phase transition temperature can be further altered by post functionalization via aminolysis of RAFT agent residues in polymer chains. Moreover, it was demonstrated by rheological studies and particle size measurements that these copolymers can form either micro‐ or macro photocrosslinked gels at suitable concentrations due to the presence of multiple methacrylate groups. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 3751–3761