Effect of high coverages on proton transfer in the zeolite/water system

The density functional theory and Hartree–Fock methods were used to investigate the proton transfer reaction for a series of model clusters of zeolite/(H₂O)_n; n=1,2,3, and 4. Without promoted water, the hydrogen-bonded dimer of the water/zeolite system exists as a simple hydrogen-bonded complex, ZOH.(H₂O)₂, and no proton transfer occurs from zeolite to water. The third promoted water, ZOH(H₂O)₂H₂O, was found to induce a pathway for proton transfer, but at least addition two promoted molecules, ZO(H₃O⁺)H₂O(H₂O)₂, must be involved for complete proton transfer from zeolite to H₂O. The results show that the hydronium ion in water cluster adsorbed on zeolite, ZO(H₃O⁺)(H₂O)₃, can considerably affect the structure and bonding of the hydrogen-bonded dimer of water. The OO distance is contracted from 2.818 Å found in the neutral complex, ZOH(H₂O)₄, to 2.777 Å for ion-pair complex, ZO(H₃O⁺)(H₂O)₃. The distance between the oxygen of the hydronium ion and the zeolitic acid site oxygen is predicted to be 2.480 Å which is in good agreement with the experimentally observed value of 2.510 Å. The corresponding density functional adsorption energy of the high coverages of adsorbing molecules on zeolite is calculated to be −9.14 kcal/mol per molecule at B3LYP/6-311+G(d,p) level of theory and compares well with the experimental observation of −8.20 kcal/mol.     

Equilibrium constants and kinetics of carbon monoxide insertion in alkyl complexes of ruthenium(II)

The equilibrium constants of the reaction of cis, trans-[Ru(CO)₂(PMe₃)₂(CH₃)I] (Mc) with carbon monoxide to give cis, trans[Ru(CO)₂(PMe₃)₂ (COMe)i] (Ac) and trans, trans[Ru(CO)₂(PMe₃)₂(COMe)I] (At) were measured at various temperatures in toluene. The thermodynamic parameters are compared with those obtained for the isoelectronic complexes of iron, and the trend is discussed. The kinetics of the carbonylation reaction of Mc, as well as those of the inverse decarbonylation reaction of At were measured. The kinetics of the carbonylation of the new complex trans, trans-[Ru(CO)₂(PMe₃)₂(CH₃)I] (Mt) were also investigated. All the results afford further support to the previously proposed CO insertion mechanism occurring via methyl migration. The comparison of these kinetic results with those of isoelectronic complexes of iron indicates that ruthenium is more reactive than iron, which is reflected by its greater aptitude to act as catalyst in many processes.     

Synthesis, crystal structure and third-order non-linear optical property of heterobimetallic cluster compound [MoOICu3S3(2,2′-bipy)2]

Nest-shaped cluster [MoOICu₃S₃(2,2′-bipy)₂] (1) was synthesized by the treatment of (NH₄)₂MoS₄, CuI, (n-Bu)₄NI, and 2,2′-bipyridine (2,2′-bipy) through a solid-state reaction. It crystallizes in monoclinic space group P2₁/n, a=9.591(2) Å, b=14.820(3) Å, c=17.951(4) Å, β=91.98(2)°, V=2549.9(10) ų, and Z=4. The nest-shaped cluster was obtained for the first time with a neutral skeleton containing 2,2′-bipy ligand. The non-linear optical (NLO) property of [MoOICu₃S₃(2,2′-bipy)₂] in DMF solution was measured by using a Z-scan technique with 15 ns and 532 nm laser pulses. The cluster has large third-order NLO absorption and the third-order NLO refraction, its ₂ and n₂ values were calculated as 6.2×10⁻¹⁰ and −3.8×10⁻¹⁷ m² W⁻¹ in a 3.7×10⁻⁴ M DMF solution.     

Übergangsmetall-silyl-komplexe L. darstellung, struktur und reaktivität der Trihydrido-Silyl-und -Stannyl-Komplexe L3FeH3(ER3) (E =Si,

Photochemical reaction of (CO)₂(dppe)Fe(H)(SiR₃) with HSiR₃ (SiR₃ = Si(OMe)₃, Si(OEt)₃, SiMe₃, SiMe₂Ph, SiPh₃) yields the trihydrido silyl complexes (CO)(dppe)FeH₃(SiR₃ ). The analogous complexes (PR′Ph₂)₃ FeH₃(ER₃) are prepared by reaction of the H₂ -complexes (PR′Ph₂)₃FeH₂(H₂) with HER₃ (ER₃ = SiMe₃, SiMC₂Ph, SiMePh₂, SiPh₃, Si(Me₂)OSi(Me₂)H, SnPh₃, SnEt₃). Additional derivates of (CO) (dppe)FeH₃(SiR₃) (SiR₃ = SiMePh₂) and (PR′Ph₂)₃FeH₃(SiR₃) (SiR₃ = Si(OMe)₃, SiH₂Ph, SiHPh₂, Si(OEt)₃, SiMePhCl) are accessible by silane exchange starting from (CO)(dppe)FeH₃(SiMe₃) and (PR′Ph₂) ₃FeH₃(SiMe₃). (PBuPh₂)₃FeH₃(SiMePh₂) was also prepared from (PBuPh₂)₃FeH₂(N₂) and HSiMePh₂, and (PBuPh₂)₃FeH₃(SnMe₃) from (PBuPh₂)₃FeH₂(H₂) and Me₃SnCl. The complex (PBuPh₂) ₃FeH₃(SnMe₃) crystallizes as a toluene solvate in the cubic space group I 3d and shows crystallographically imposed C₃-symmetry. The complexes (CO)₂ (dppe)Fe(H)(SiR₃) and (PR′Ph₂)₃FeH₃(ER₃) are highly dynamic in solution. Low temperature NMR measurements and the E, Fe, H coupling constants strongly indicate that the exchange mechanism involves η²-HER₃ ligands.     

Snthesis and x-ray structure of an isomeric cyclophosphazene complex containing antimony(III)

The monosilylated acyclic phosphazene ligand Me₃SiNP(NMe₂)₂NP(NMe₂)₂ NH₂ (3) has been synthesized and characterized. The reaction of 3 with antimony triacetate, Sb(OOCMe₃), in refluxing toluene forms a cyclic phosphazene derivative, [N{P(NMe₂)₂NH}₂Sb(OOCMe)₂ (4), which is characterized by elemental analyses, mass, IR and NMR spectroscopy and single-crystal X-ray structural analysis. Complex 4 crystallizes in the form of a cis and trans isomeric chain in the solid state.     

Photochemical synthesis and structural characterization of (η-C5Me5)3Mo3(CO)4(μ2-H)(μ3-O): an unprecedented 46-electron trimolybdenum cluster containing a localized monoprotonated Mo---Mo double bond

Irradiation of the 30-electron Mo₂(η⁵-C₅Me₅)₂(CO)₄ and Re₂(CO)₁₀ in toluene solution (containing H₂O) afforded (in 1–2% yields) a novel triangular metal cluster, (η⁵-C₅Me₅)₃Mo₃(CO)₄(η₂-H)(η₃-O) (1), which was characterized by a single-crystal X-ray diffraction study. Compound 1, of pseudo C_s-m symmetry, has a triangulo-Mo₃(η₃-O) core with composite Mo---H---Mo and Mo---Mo electron-pair bonds along one unusually short edge (2.660(1) Å) and Mo--- electron-pair bonds along the other two edges (2.916(1) and 2.917(1) Å). The edge-bridged hydride ligand, which displays a characteristic high-field proton NMR resonance at δ −17.79 ppm, was not found from the crystallographic determination but was located via a quantitative potential-energy-minimization method. This procedure unambiguously established that the optimized hydrogen position, which corresponds to a distinct coordination site with identical Mo---H distances of 1.85 Å, is the only one that can be sterically occupied by a metal-bound hydride ligand. This 46-electron species is the first electron-deficient trimolybdenum cluster containing a monoprotonated Mo---Mo double bond; its existence is attributed to ligand overcrowding due to the bulky pentamethylcyclopentadienyl rings. Black (η⁵- C₅Me₅)₃Mo₃(CO)₄(η₂-H)(η₃-O) · 1/2THF crystallizes with two formula species in a triclinic unit cell of P1 symmetry with a 8.603(4), b 11.115(4), c 19.412(11) Å, 80.69(4)°, β 101.10(4)°, and γ 98.88(3)° at −40° C. Least-squares refinement (RAELS with 221 variables) of one independent Mo₃ molecule and a centrosymmetrically-disordered THF molecule converged at R₁(F) 5.62%, R₂(F 6.88% for 8460 independent diffractometry data (I₀ ρ 3σ(I₀ collected at −40° C with Mo-K radiation     

Solid-state static Cu and P CP/MAS NMR, and liquid-state EXAFS studies on copper(I) O,O′-dialkyldithiophosphate cluster compounds: Formation of the copper(I) O,O′-di-iso-amyldithiophosphate cluster compound on the surface of synthetic chalcocite

Polycrystalline octa-nuclear copper(I) O,O′-di-i-propyl- and O,O′-di-i-amyldithiophosphate cluster compounds, {Cu₈[S₂P(OR)₂]₆(μ₈-S)} where R = ⁱPr and ⁱAm, were synthesized and characterized by ³¹P CP/MAS NMR at 8.46 T and static ⁶⁵Cu NMR at multiple magnetic field strengths (7.05, 9.4 and 14.1 T). The symmetries of the electronic environments around the P sites were estimated from the ³¹P chemical shift anisotropy (CSA) parameters, δ_aniso and η. Analyses of the ⁶⁵Cu chemical shift and quadrupolar splitting parameters for these compounds are presented with the data being compared to those for the analogous octa-nuclear cluster compounds with R = ⁿBu and ⁱBu. The ⁶⁵Cu transverse relaxation for the copper sites in {Cu₈[S₂P(OⁱPr)₂]₆(μ₈-S)} and {Cu₈[S₂P(OⁱAm)₂]₆(μ₈-S)} was found to be very different, with a relaxation time, T₂, of 590 μs (Gaussian) and 90 μs (exponential), respectively. The structures of {Cu₄[S₂P(OⁱPr)₂]₄} and {Cu₈[S₂P(OⁱPr)₂]₆(μ₈-S)} cluster compounds in the liquid- and the solid-state were studied by Cu K-edge EXAFS. The disulfide, [S₂P(OⁱAm)₂]₂, was obtained and characterized by ³¹P{¹H} NMR. The interactions of the disulfide and of the potassium O,O′-di-i-amyldithiophosphate salt with the surfaces of synthetic chalcocite (Cu₂S) were probed using solid-state ³¹P NMR spectroscopy and only the presence of copper(I) dithiophosphate species with the {Cu₈[S₂P(OⁱAm)₂]₆(μ₈-S)} structure was observed.     

Kinetics and mechanisms of homogeneous catalytic reactions: Part 7. Hydroformylation of 1-hexene catalyzed by cationic complexes of rhodium and iridium containing PPh3

Cationic rhodium and iridium complexes of the type [M(COD)(PPh₃)₂]PF₆ (M = Rh, 1a; Ir, 1b) are efficient precatalysts for the hydroformylation of 1-hexene to its corresponding aldehydes (heptanal and 2-methylhexanal), under mild pressures (2–5 bar) and temperatures (60 °C for Rh and 100 °C for Ir) in toluene solution; the linear to branched ratio (l/b) of the aldehydes in the hydroformylation reaction varies slightly (between 3.0 and 3.7 for Rh and close to 2 for Ir). Kinetic and mechanistic studies have been carried out using these cationic complexes as catalyst precursors. For both complexes, the reaction proceeds according to the rate law r_i = K₁K₂K₃k₄[M][olef][H₂][CO]/([CO]² + K₁[H₂][CO] + K₁K₂K₃[olef][H₂]). Both complexes react rapidly with CO to produce the corresponding tricarbonyl species [M(CO)₃(PPh₃)₂]PF₆, M = Rh, 2a; Ir, 2b, and with syn-gas to yield [MH₂(CO)₂(PPh₃)₂]PF₆, M = Rh, 3a; Ir, 3b, which originate by CO dissociation the species [MH₂(CO)(PPh₃)₂]PF₆ entering the corresponding catalytic cycle. All the experimental data are consistent with a general mechanism in which the transfer of the hydride to a coordinated olefin promoted by an entering CO molecule is the rate-determining step of the catalytic cycle.     

Copper-sulfide cluster assembled architecture via in situ reaction

A new copper-thiolate cluster assembled framework [Cu₂(μ₄-SCH₃)Cl]_n (1), has been solvothermally synthesized through in situ reaction viz., in situ ligand generation and metal reduction. Compound 1 represents the first 3D framework based on Atlas-sphere functionalized by single μ₂-Cl^- groups. DOS calculation reveals the interaction of electronic structures. It is found that the HOMO is mainly distributed on Cl, Cu and S bonding orbitals, while the LUMO is dominated by Cu-Cl antibonding orbitals.     

Fourfold clusters of rovibrational energies in H2Te studied with an ab initio potential energy function

We report here an ab initio investigation of the cluster effect (i.e., the formation of four-member groups of nearly degenerate rotation-vibration energy levels at higher J and K_a values) in the H₂Te molecule. The potential energy function has been calculated ab initio at a total of 334 molecular geometries by means of the CCSD (T) method where the (1s-4f) core electrons of the Te atom were described by an effective core potential. The values of the potential energy function obtained cover the region up to around 10 000 cm⁻¹ above the equilibrium energy. On the basis of the ab initio potential, the rotation-vibration energy spectra of H₂ ¹³⁰Te and its deuterated isotopomers have been calculated with the MORBID (Morse oscillator rigid bender internal dynamics) Hamiltonian and computer program. In particular, we have calculated the rotational energy manifolds for J40 in the vibrational ground state, the ν₂ state, the “first triad” (the ν₁/ν₃/2 ν₂ interacting vibrational states), and the “second triad” (the (ν₁ + ν₂)/(ν₂ + ν₃)/3 ν₂ states) of H₂¹³⁰Te. We have also investigated the cluster formation in the vibrational ground state of H₂ ¹³⁰Te by first fitting the rotational data available from experiment with a modified Watson-type effective Hamiltonian and then using the optimized ground state constants to extrapolate the rotational structure to higher J values. Both the ab initio calculation and the prediction with the effective Hamiltonian show that the cluster formation in H₂Te is very similar to that in H₂Se and H₂S, which we have studied previously. However, contrary to semiclassical predictions, we do not determine any significant displacement of the clusters towards lower J values relative to H₂Se. Hence the experimental observation of the cluster states in H₂Te will be at least as difficult as in H₂Se.     

Heterobimetallic Mo---Sn complexes. Reactions of [Mo(CO)3(CH3CN)2(Cl)(SnRCl2)] (R = Me, Ph) with 4(4-XC6H4)3 (X = Cl, F, H, Me, MeO)

Three families of heterobimetallic compounds were obtained by reaction of [Mo(CO)₃(CH₃CN)₂(Cl)(SnRCl₂)] (R = Ph, Me) with P(4-XC₆H₄)₃ (X = Cl, F, H, Me, MeO). The type of compound obtained dependent on the solvent and concentration of the starting compound. So, [Mo(CO)₂(CH₃COCH₃)₂(PPh₃)(Cl)(SnRCl₂)]·nCH₃COCH₃ (R = Ph, n = 0.5; R = Me, n = 1) (type I) and [Mo(CO)₃{P(4-XC₆H₄)₃}(μ-Cl)(SnRCl₂)]₂ (R = Ph, X = Cl, F, H, Me, MeO; R = Me, X = Cl, F) (type II) were isolated from acetone solution in ca 0.05 M and 0.1 M concentrations, respectively. However, [Mo(CO)₃(CH₃CN) {P(4-XC₆H₄)₃}(Cl)(SnRCl₂)] (R = Ph, X = H; R = Me, X = Cl, F, H) (type III) were obtained from dichloromethane solution independently of the concentration used. All new complexes showed a seven-coordinate environment at molybdenum, containing Mo---Cl and Mo---Sn bonds. Mössbauer spectra indicated a four-coordination at tin for type III complexes.     

Synthesis and characterisation of the methylene-inserted mixed-chalcogenide compounds Fe2(CO)6(μ-SeCH2Te) and Fe2(CO)6(μ-SCH2Te)

The methylene-bridged, mixed-chalogen compounds Fe₂(CO)₆(μ-SeCH₂Te) (1) and Fe₂(CO)₆(μ-SCH₂Te) (3) have been synthesised from the room temperature reaction of diazomethane with Fe₂(CO)₆(μ-SeTe) and Fe₂(CO)₆(μ-STe), respectively. Compounds 1 and 3 have been characterised by IR, ¹H, ¹³C, ⁷⁷Se and ¹²⁵Te NMR spectroscopy. The structure of 1 has been elucidated by X-ray crystallography. The crystalsare monoclinic,space group P2₁/n, A = 6.695(2), B = 13.993(5), C = 14.007(4)Å, β = 103.03(2)°, V = 1278(7) ų, Z = 4, D_c = 2.599 g cm⁻³ and R = 0.030 (R_w = 0.047).     

Photochemical reaction of W(CO)6 with SnCl4 II. Synthesis and X-ray structure of tetrachlorobis(triphenylphosphine oxide)tungsten(IV), [WCl4(OPPh3)2]

The crystal structure of [WCl₄(OPPh₃)₂](1), formed in the photochemical reaction of W(CO)₆ with SnCl₄ in the presence of triphenylphosphine, has been determined by the single-crystal X-ray diffraction method. The compound crystallizes in the monoclinic space C2/c, with A=14.027(3), B=13.163(3), C=19.621(4) Å, β=96.36(3)°, Z=4. The structure solved by heavy-atom methods has been refined to R=0.0466, for 3489 observed reflections.

The [WCl₄(OPPh₃)₂] molecule possesses a crystallographically imposed C₂ axis passing through the tungsten atom. Despite steric demands, a mutually cis arrangement of triphenylphosphine oxide oxygens is found for [WCl₄(OPPh₃)₂], while there is a slight lengthening of the W---Cl bonds trans to the oxygen atoms.     

Ergebnisse aus versuchen zur darstellung von bis(trifluormethylsulphanyl)thioketen (CF3S)2C=C=S

The attempted preparation of bis(trifluoromethylsulphanyl)thioketene is described. Mono-and di-(trifluoromethylsulphanyl)-substituted orthothioesters may be prepared fromCH₃C(SC₂H₅)₃ and CF₃SCl in the presence of anhydrous ZnCl₂. The unstable compoundshave been isolated and characterized. The corresponding CF₃Se and CF₃SO₂ derivativesare only formed as intermediates which decompose to ketene diethylmercaptal. Suchmono- and di-substituted products are obtained in good yield from H₂C=C(SC₂H₅)₂ andCF₃ECl (E=S, Se). The reaction of H₂C=C(SC₂H₅)₂ with CF₃SO₂F gave only poor yieldsof (CF₃SO₂)_nCH_2−n=C(SC₂H₅)₂ (n=1, 2) which were only capable of characterizationin etheral solution by spectral means. Attempts to prepare (CF₃S)₂C=C=S by refluxing(CF₃S)₂CHC(O)Cl, (CF₃S)₂CHC(O)OH or (CF₃S)₂C=C=O with P₄S₁₀ in toluene yieldedonly the cyclic dimer and the corresponding 1,3,4-trithiolan.     

Synthesis, characterization and reactivity of tetracyclopentadienylniobium(IV), a precursor to organometallic derivatives of niobium(IV)

In toluene as medium, tetra(cyclopentadienyl)niobium(IV), NbCp₄, has been prepared in satisfactory yields from the reaction of NaCp with: (a) Nb₂C1₁₀, (b) NbCl₄(THF)₂, or (c) NbCp₂Cl₂. Tetracyclopentadienylniobium(IV) has been characterized by X-ray diffraction. Crystal data: C₂₀H₂₀Nb, M=353.29 g mol⁻¹, hexagonal, space group P6₅ (no. 170), a=b=9.396(2), c=31.23(3) Å, V=2388(2) ų, Z=6, d_calc=1.48 g cm⁻³, λ(Cu–K)=1.54184 Å, T=291 K, μ=62.04 cm⁻¹, F(000)=1686. Two of the four cyclopentadienyl ligands are bonded to niobium in a pentahapto fashion, the other two being monohapto. NbCp₄ undergoes cyclopentadiene elimination in the presence of species containing active protons such as Ph₃SiOH or strong acids, the products being tris- or biscyclopentadienyl compounds depending on the molar ratio of the reagents.     

A thermochemical investigation of guest-host interactions in labile Werner clathrates of the [Ni(4-EtPy)4(NCS)2]·G type (G = Methyl derivatives of benzene)

The stoichiometry of thermal decomposition has been studied for (I): [Ni(4-EtPy)₄(NCS)₂] as a host complex as well as for its clathrates [Ni(4-EtPy)₄(NCS)₂]·G where guest molecule G - toluene, (II): T, (III): o-xylene (o-X) and (IV): p-xylene (p-X). The loss of volatile components proceeds in three steps (−2L, −1L, −1L) for I and in four steps (−G, −2L, −1L, −1L) for II, III and IV. DSC and X-ray powder measurements indicated a phase transition in all compounds under study. However, this process is overlapped by the escape of G in II and III. The differences in enthalpy changes are associated with different guest-host interactions in the particular clathrates.     

Synthesis and application of diphenylbis (3,5-dimethylpyrazol-1-yl)methane to form η-arene complexes of molybdenum

The neutral nitrogen-bidentate ligand, diphenylbis(3,5-dimethylpyrazol-1-yl)methane, Ph₂CPz′₂, can readily be obtained by the reaction of Ph₂CCl₂ with excess HPz′ in a mixed-solvent system of toluene and triethylamine. It reacts with [Mo(CO)₆] in 1,2-dimethoxyethane to give the η²-arene complex, [Mo(Ph₂CPz′₂)(CO)₃] (1). This η²-ligation appears to stabilize the coordination of Ph₂CPz′ ₂ in forming [Mo(Ph₂CPz′₂)(CO)₂(N₂C₆H₄NO₂-p)][BPh₄] (2) and [Mo(Ph₂CPz′₂)(CO)₂(N₂Ph)] [BF₄] (3) from the reaction of 1 with the appropriate diazonium salt but the stabilization seems not strong enough when [Mo{P(OMe)₃} ₃(CO)₃] is formed from the reaction of 1 with P(OMe)₃. The solid-state structures of 1 and 3 have been determined by X-ray crystallography: 1-CH₂Cl₂, monoclinic, P2₁/n, a = 11.814(3), b = 11.7929(12), c = 19.46 0(6) Å, β = 95.605(24)°, V = 2698.2(11) ų, Z = 4, D_calc = 1.530 g/cm³ , R = 0.044, R_w = 0.036 based on 3218 reflections with I > 2σ(I); 2 (3)-1/2 hexane-1/2 CH₃OH-1/2 H₂O-1 CH₂Cl₂, monoclinic, C2/c, a = 41.766(10), b = 20.518(4), c = 16.784(3) Å, β = 101.871(18)°, V = 14076(5) ų, Z = 8, D_calc = 1.457 g/cm³, R = 0.064, R_w = 0.059 based on 5865 reflections with I > 2σ(I). Two independent cations were found in the asymmetric unit of the crystals of 3. The average distance between the Mo and the two η²-ligated carbon atoms is 2.574 Å in 1 and 2.581 and 2.608 Å in 3. The unfavourable disposition of the η²-phenyl group with respect to the metal centre in 3 and the rigidity of the η²-arene ligation excludes the possibility of any appreciable agostic C---H → Mo interaction.     

Studies of N-heterocyclic compounds with triosmium clusters: Formation of the heterocyclic-linked dicluster compound [Os 6(μ-H)2(μ3-C6H4N3)2(CO)18]

The cluster [Os₃(CO)₁₀(MeCN)₂] reacts with indazole (C₇H₆N₂) to give two isomeric products [0s₃(μ-H)(μ-C₇H₅N₂)(CO)₁₀] in which the five-membered ring has been metallated with N-H cleavage to give an N,N-bonded isomer or with C-H cleavage to give a C,N-bonded isomer. These two isomers have very similar X-ray structures but can be clearly distinguished by ¹H NMR methods. They are shown to correspond to related clusters derived from pyrazole. Benzotriazole (C₆H₅N₃) also reacts (as shown earlier by others) to give two isomers: an N,N-bonded species [Os₃(μ-H)(μ-C₆H₄N₃)(CO)₁₀] coordinated only through the five-membered ring and a minor C,N-bonded isomer [Os₃(μ-H)(μ-C₆H₄N₃)(CO)₁₀], metallated at the C₆ ring and coordinated through both rings. The former isomer reacts with Me₃NO in acetonitrile to give [Os₃(μ-H)(μ-C₆H₄N₃)(CO)₉(MeCN)] which thermally looses MeCN to produce the coupled product [Os₆(μ-H)₂(μ₃-C₆H₄N₃)₂(CO)₁₈] which was shown by X-ray structure determination to have all six nitrogen atoms coordinated to osmium, a novel situation for coordinated benzotriazole. The two Os₃ units are linked together by an OsNNOsNN ring in a boat conformation with the whole cluster adopting C₂ symmetry.     

Stability of the silicon-ruthenium bond in the presence of a strong nucleophile. Phase sensitive H NMR COSY and crystal structure of Ru(CO)2(NH2CH2C6H5)2(Si(C6H5)(CH3)2)I

The ruthenium(II) complex Ru(CO)₂(NH₂(NH₂CH₂C₆H₅)₂(Si(C₆H₅)(CH₃)₂)I has been prepared by the reaction of Ru(CO)₄(Si(C₆H₅)(CH₃)₂)I with benzylamine. Two-dimensional homonuclear ¹H NMR experiments examine the scalar coupling of the enantiotopic amino and methylene protons of the benzylamine ligand. X-ray analysis of Ru(CO)₂(NH₂CH₂C₆H₅)₂(Si(C₆H₅)(CH₃)₂)I·1/3C₅H₁₂ (triclinic; P ; a = 14.266(4), b = 15.748(5), c = 20.082(6) Å; = 94.38(3), β = 96.30(2), γ = 101.52(2)°) indicates three crystallographically unique complexes form a clathrate with a pentane guest.     

Reactivity of tri- and tetra-nuclear ethylidyne cyclopentadienylcobalt clusters towards protonic acids

The bis(μ₃-ethylidyne) tricobalt cluster [(CpCo)₃(μ₃-CCH₃)₂] (1b) is protonated by trifluoroacetic acid to give the dicobalt edge-protonated cation [H(CpCo)₃(μ₃-CCH₃)₂]⁺ [lb + H]⁺. Protonation of the μ₃-ethylidyne tetracobalt cluster hydride [H(CpCo)₄(μ₃-CCH₃)] (3) takes place in two consecutive steps. At low temperature [H₂(CpCo)₄(μ₃-CCH₃)]⁺ [3 + H]⁺ is formed first, and is then slowly converted into [H₃(CpCo)₄(μ₃-CCH₃)]²⁺ [3 + 2H]²⁺ by an excess of acid. As judged by the ¹H NMR data and the crystal structure of [3 + X]⁺[(CF₃COO)₂X]⁻ (X = H or D) the endo hydrogens in [3 + H]⁺ and [3 + 2H]²⁺ occupy μ₃-(Co₃) face capping hydridic positions. The cations [1b + H]⁺ and [3 + H]⁺ show hydride fluxionality in solution, which in the case of [3 + H]⁺ can be frozen out on the NMR timescale at low temperature (ΔG ^≠ (203 K) = 40.8 kJ/mol). The structure of [3 + X]⁺ [(CF₃COO)₂X]⁻ (X = H or D) was determined by X-ray crystallography. One of the hydrides/deuterides is located on the crystallographic mirror plane, capping a tricobalt face of the cluster cation. The other endo hydrogen atom is believed to be disordered between the other two μ₃-(Co₃) sites, which are related by space group symmetry. Deuteronation of 3 shows a strong normal kinetic deuterium isotope effect. From the temperature independence of the ¹H NMR spectrum of [3 + 2D]²⁺ a non-fluxional solution structure can be inferred. In all the systems studied, hydridic (μ₂- or μ₃-) sites are thermodynamically preferred to possible isomeric agostic CoHC or Co₂HC sites for the endo hydrogens. Agostic interactions cannot, however, be ruled out in transient intermediates during the course of the protonations.