The crystal chemistry of L-Ta2O5 and related structures

Single crystals of a new form of L-Ta₂O₅ with a 19×b superstructure have been synthesised by flux growth. The phase is most likely stabilised by the incorporation of a small amount of lithium (0.14 wt% Li) from the flux. The phase has C-centred monoclinic symmetry with , (), , γ=90.00(1)°. The structure was refined in space group C112/m to R₁=0.044 for 814 unique reflections with F>4σ(F). The structure can be described as comprising chains of edge-shared TaO₇ pentagonal bipyramids that are regularly folded at (010) planes to give sinusoidal chains along [010]. These chains are interconnected along [100] and [001] by corner sharing, creating inter-chain regions that are occupied by isolated TaO₆ octahedra and pairs of corner-shared octahedra. A comparison with published data for high-quality refinements of related structures has led to the development of a general model that can explain the structural chemistry variations in the known L-Ta₂O₅-related structures. A shorthand notation is presented for representing the structures, based on the sequence along [010] of the interchain octahedra.     

Second order incommensurate phase transition in 25L-Ta2O5

A new structural state 25L-Ta₂O₅, obtained from sintering and annealing treatments of a Ta₂O₅ powder, is identified both by electron diffraction and high resolution imaging on a transmission electron microscope (TEM). According to general rules for the different L-Ta₂O₅ structures proposed by Grey et al. (J. Solid State Chem. 178 (2005) 3308), a structural model is derived from their crystallographic data on 19L-Ta₂O₅. This model yields simulated images in agreement with high resolution TEM observations of the structure oriented along its [001] zone axis, but only for a very thin crystal thickness of less than 1.2 nm. Such a limitation is shown to be due to a modulation of the structure along its [001] axis. Actually, from an analysis of a diffuse scattering and of its evolution into satellites reflections as a function of the cooling rate, a second order incommensurate phase transition can be assumed to occur in this compound. The property of single phase samples observed by TEM is also verified by X-ray powder diffraction. In a discussion about studies performed by different authors on incommensurate structures in the system Ta₂O₅-WO₃, it is noticed that TEM results, similar to ours, indicate that phase transitions could be expected in these structures.     

Contrasting oxide crystal chemistry of Nb and Ta:: The structures of the hexagonal bronzes BaTa2O6 and Ba0.93Nb2.03O6

The high-temperature hexagonal forms of BaTa₂O₆ and Ba_0.93Nb_2.03O₆ have P6/mmm symmetry with unit-cell parameters a=21.116(1) Å, c=3.9157(2) Å and a=21.0174(3) Å, c=3.9732(1) Å, respectively. Single crystal X-ray structure refinements for both phases are generally consistent with a previously proposed model, except for displacements of some Ba atoms from high-symmetry positions. The structures are based on a framework of corner- and edge-connected Nb/Ta-centred octahedra, with barium atoms occupying sites in four different types of [0 0 1] channels with hexagonal, triangular, rectangular and pentagonal cross-sections. The refinements showed that the non-stoichiometry in the niobate phase is due to barium atom vacancies in the pentagonal channels and to extra niobium atoms occupying interstitial sites with tri-capped trigonal prismatic coordination. The origin of the non-stoichiometry is attributed to minimisation of non-bonded Ba-Ba repulsions. The hexagonal structure is related to the structures of the low-temperature forms of BaNb₂O₆ and BaTa₂O₆, through a 30° rotation of the hexagonal rings of octahedra centred at the origin.     

Fluoride modification of Mo/Al2O3 catalysts: Characterization of the changes induced in support and Mo phases

The characterization of fluoride-modified Mo/Al₂O₃ catalysts was performed in order to investigate on the effect that low levels of fluoridation of the alumina support (0-2.0 wt.%) cause on the support itself and on the supported Mo oxide and sulfide phases. Fluoride-modified Al₂O₃ supports and Mo/Al₂O₃ catalysts where characterized by nitrogen physisorption, scanning electronic microscopy (SEM-EDX), isoelectric point (IEP), Fourier transform infrared spectroscopy (FT-IR), infrared spectroscopy of adsorbed CO₂ (IR-CO₂), and temperature programmed reduction (TPR). The dispersion of the sulfided catalysts was estimated by dynamic NO chemisorption. The results indicate that the different hydroxyl types present on the alumina surface react to a different extent with fluoride and that it is the most basic hydroxyl groups that are titrated first.The consumption of the alumina OH by F⁻, inhibits, during the deposition of Mo, the formation of tetrahedral molybdenum oxide species in strong interaction with the support, leading to an increased number of polymeric octahedral Mo surface species. The NO adsorption results put in evidence a drop in the dispersion of the MoS₂ phase present in the sulfided samples.     

Structural and dielectric/ferroelectric properties of (La1−xNdx)2Ti2O7 synthesized by sol-gel route

A series of compounds with the general formula (La_1−xNd_x)₂Ti₂O₇ (0.0≤x≤1.0) has been prepared by the sol-gel method. The decomposition of the gel was characterized by thermo-gravimetric analysis coupled to mass spectrometry, indicating the reaction is achieved above 850 °C. The lattice parameters versus x show an expected decrease in the a and b parameters while c and the β angle remain almost unchanged with respect to the monoclinic symmetry conserved for the full solid solution. Dielectric, piezoelectric and ferroelectric properties were measured on the entire series.     

Neutron diffraction and X-ray absorption study of Ag5Pb2O6

Neutron diffraction and X-ray absorption measurements were carried out for a silver-lead oxide Ag₅Pb₂O₆. The powder neutron diffraction patterns could be fitted to the trigonal structure, as was found by X-ray diffraction. From the bond-valence-sum (BVS) analysis, the valences of the Ag and Pb ions were estimated to be about 1+ and 3.7+, respectively. The X-ray absorption measurements indicated that the ionic state of Ag is close to 1+, while that of Pb stands between 3+ and 4+. The deviation of the valence of the Pb ion from 4+ suggests a contribution of Pb orbitals to the metallic conduction as well as the possible superconductivity of this material, consistently with a recent band-structure calculation.     

Temperature-dependent structural study of microporous CsAlSi5O12

CsAlSi₅O₁₂ crystals were synthesized at high temperature by slow cooling of a vanadium oxide flux. Single-crystal X-ray diffraction structure analysis and electron microprobe analyses yielded the microporous CAS zeolite framework structure of Cs_0.85Al_0.85Si_5.15O₁₂ composition. High-temperature single-crystal and powder X-ray diffraction studies were utilized to analyze anisotropic thermal expansion. Rietveld refined cell constants from powder diffraction data, measured in steps of 25 °C up to 700 °C, show a significant decrease in expansion above 500 °C. At 500 °C, a displacive, static disorder-dynamic disorder-type phase transition from the acentric low-temperature space group Ama2 to centrosymmetric Amam (Cmcm in standard setting) was found. Thermal expansion below the phase transition is governed by rigid-body TO₄ rotations accompanied by stretching of T-O-T angles. Above the phase transition at 500 °C all atoms, except one oxygen (O6), are fixed on mirror planes. Temperature-dependent polarized Raman single-crystal spectra between −270 and 300 °C and unpolarized spectra between room temperature and 1000 °C become increasingly less resolved with rising temperature confirming the disordered static-disordered dynamic type of the phase transition.     

The magnetic structure of clinopyroxene-type LiFeGe2O6 and revised data on multiferroic LiFeSi2O6

The clinopyroxene compounds LiFeSi₂O₆ and LiFeGe₂O₆ have been investigated by constant wavelength neutron diffraction at low temperatures and by bulk magnetic measurements. Both compounds are monoclinic, space group P2₁/c and do not exhibit a change in nuclear symmetry down to 1.4 and 5 K respective. However, they transform to a magnetically ordered state below 20 K. LiFeSi₂O₆ shows a simple magnetic structure with no indication of an incommensurate modulation. The magnetic space group is P2₁/c′ and the structure is described by a ferromagnetic coupling of spins within the infinite M1 chains of edge-sharing octahedra, while the coupling between these M1 chains is antiferromagnetic. The magnetic phase transition is accompanied by magnetostriction of the lattice when passing through the magnetic phase transition. The magnetic structure of LiFeGe₂O₆ is different to the silicate: the space group is and the magnetic unit cell doubled along the a-direction. Within the M1 chains spins are coupled antiferromagnetically, while the chain to chain coupling is antiferromagnetic when coupling goes via the GeB tetrahedron and ferromagnetic when it goes via the GeA tetrahedron.     

Ab initio structure determination of new compound Li4CaB2O6

A new compound, Li₄CaB₂O₆, has been synthesized by solid-state reaction and its structure has been determined from powder X-ray diffraction data by direct methods. The refinement was carried out using the Rietveld methods and the final refinement converged with R_p=10.4%, R_wp=14.2%, R_exp=4.97%. This compound belongs to the orthorhombic space group Pnnm, with lattice parameters a=9.24036(9) Å, b=8.09482(7) Å, and c=3.48162(4) Å. Fundamental building units are isolated [BO₃]³⁻ anionic groups, which are all parallel to the a-b plane stacked along the c-axis. The Ca atoms are six-coordinated by the O atoms to form octahedral coordination polyhedra, which are joined together through edges along the c-axis, forming infinitely long three-dimensional chains. The Li atoms have a four-fold and a five-fold coordination with O atoms that lead to complex Li-O-Li chains that also extend along the c-axis. The infrared spectrum of Li₄CaB₂O₆ was also studied, which is consistent with the crystallographic study.     

Pentafluoro-λ-sulfanyl (SF5) perfluoroalkyl iodides-synthesis and reaction with ethylene and tetrafluoroethylene : Crystal structure of SF5(CF2)4CH2CH2I

A series of reactions between SF₅CF₂CF₂I and SF₅(CF₂)₄I with F₂CCF₂ was carried out in an effort to find the most effective methods for chain-extension. Also, for the first time, SF₅(CF₂)₈I and SF₅(CF₂)₁₀I have been prepared and isolated. The reaction conditions for the addition of H₂CCH₂ were also investigated. A determination of the crystal structure of the SF₅(CF₂)₄CH₂CH₂I has been carried out: the crystal system is monoclinic, with space group P2(1)/n and a=23.465(5) Å; b=6.0971(12) Å; c=44.892(9) Å; α=90°; β=99.38(3)°; γ=90°; Z=20.     

The disordered cubic structure of Ca7Co3Ga5O18

The new mixed oxide having composition close to Ca₇Co₃Ga₅O₁₈ was synthesized from CaCO₃, Co₃O₄ and Ga₂O₃ at 1150 °C in air and studied by neutron and synchrotron X-ray powder diffraction, selected-area electron diffraction and high-resolution electron microscopy. The structure was refined, using time-of-flight (TOF) neutron powder diffraction data, in space group F432, with and Z=8, to R_F=0.7%. It is considerably disordered, with four different tetrahedral sites randomly occupied by Co and Ga atoms at a ratio of 1:2. The tetrahedra form a disordered (Co_1/3Ga_2/3)O₂ 3D-framework inside which isolated CoO₆ octahedra, surrounded by 8 Ca atoms, are located. The structure is related to the ordered structure of Ca₁₄Al₁₀Zn₆O₃₅. Electron diffraction patterns confirmed the symmetry and unit cell and revealed no diffuse scattering. High-resolution electron microscopy images showed the absence of extended structural defects.     

Crystallographic and magnetic characterisation of the brownmillerite Sr2Co2O5

Sr₂Co₂O₅ with the perovskite-related brownmillerite structure has been synthesised via quenching, with the orthorhombic unit cell parameters a=5.4639(3) Å, b=15.6486(8) Å and c=5.5667(3) Å based on refinement of neutron powder diffraction data collected at 4 K. Electron microscopy revealed L-R-L-R-intralayer ordering of chain orientations, which require a doubling of the unit cell along the c-parameter, consistent with the assignment of the space group Pcmb. However, on the length scale pertinent to NPD, no long-range order is observed and the disordered space group Imma appears more appropriate. The magnetic structure corresponds to G-type order with a moment of 3.00(4) μ_B directed along [1 0 0].     

Order in the disordered state: local structural entities in the fast ion conductor Ba2In2O5

The structural features of Ba₂In₂O₅ at high temperatures are discussed based on a thorough study of the full energy hypersurface of a 36 atoms supercell by periodic density functional theory. The results obtained for this cell are furthermore used for considering stacking-sequences and connectivity-patterns present only in larger supercells. The distribution of oxygen vacancies is far from random and relatively few configurations, associated with different arrangements of tetrahedral InO₄, square pyramidal InO₅ and octahedral InO₆ entities, are thermally accessible at most temperatures. Our results call into the question of commonly used defect models for such grossly disordered materials in which oxygen vacancies are distributed at random over a number of lattice sites. The energetic preference for certain structural entities also has important implications for ionic transport due to restraints imposed by local symmetry.     

Magnetic diphase nanostructure of ZnFe2O4/γ-Fe2O3

Magnetic diphase nanostructures of ZnFe₂O₄/γ-Fe₂O₃ were synthesized by a solvothermal method. The formation reactions were optimized by tuning the initial molar ratios of Fe/Zn. All samples were characterized by X-ray diffraction, thermogravimetric analysis, infrared spectroscopy, and Raman spectra. It is found that when the initial molar ratio of Fe/Zn is larger than 2, a diphase magnetic nanostructure of ZnFe₂O₄/γ-Fe₂O₃ was formed, in which the presence of ZnFe₂O₄ enhanced the thermal stability of γ-Fe₂O₃. Further increasing the initial molar ratio of Fe/Zn larger than 6 destabilized the diphase nanostructure and yielded traces of secondary phase α-Fe₂O₃. The grain surfaces of diphase nanostructure exhibited a spin-glass-like structure. At room temperature, all diphase nanostructures are superparamagnetic with saturation magnetization being increased with γ-Fe₂O₃ content.     

A new structure type of phosphate: Crystal structure of Na2Zn5(PO4)4

A new compound, Na₂Zn₅(PO₄)₄, was identified in the system ZnONa₂OP₂O₅ and high-quality crystal was obtained by the melt method. The crystal structure of this compound was solved by direct method from single crystal X-ray diffraction data. The structure was then refined anisotropically using a full-matrix least square refinement on F² and the refinement converged to R₁=0.0233 and wR₂=0.0544. This compound crystallizes in the orthorhombic system with space group Pbcn, lattice parameters a=10.381(2) Å, b=8.507(1) Å, c=16.568(3) Å and Z=4. The structure is made up of 3D [Zn₅P₄O₁₆]_n²ⁿ⁻ covalent framework consisting of [Zn₄P₄O₁₆]_n⁴ⁿ⁻ layers. The powder diffraction pattern of Na₉Zn₂₁(PO₄)₁₇ is explained by simulating a theoretical pattern with NaZnPO₄ and Na₂Zn₅(PO₄)₄ in the molar ratio of 1:4 and then by Rietveld refinement of experimental pattern. Na₂Zn₅(PO₄)₄ melts congruently at 855 °C and its conductivity is 5.63×10⁻⁹ S/cm.     

B2O3-Bi2O3-ZnO-Al2O3玻璃助烧剂对BaTiO3陶瓷烧结条件、晶体结构和介电性能的影响

通过调节B₂O₃‐Bi₂O₃‐ZnO‐Al₂O₃(BBZA)玻璃的添加量研究其对钛酸钡(BaTiO₃)陶瓷烧结条件、晶体结构和介电性能的影响。结果表明：添加适量的BBZA玻璃能够有效地将BaTiO₃陶瓷烧结温度由1350℃降至950℃,并使其致密化。同时,添加BBZA玻璃后,BaTiO₃的晶体结构随着烧结温度的升高而发生转变(立方相→四方相)。另外,BBZA玻璃的引入使BaTiO₃陶瓷的居里峰得到了有效的抑制和拓宽。陶瓷微观形貌显示,玻璃相均匀分布在BaTiO₃晶粒表面。优化的BaTiO₃陶瓷制备条件如下：BBZA添加量(质量分数)为2.0%,烧结温度为950℃。在该条件下制备的BaTiO₃陶瓷介电常数达到1364,介电损耗低至1.2%。     

Effect of sintering on the ionic conductivity of garnet-related structure Li5La3Nb2O12 and In- and K-doped Li5La3Nb2O12

Garnet-structure related metal oxides with the nominal chemical composition of Li₅La₃Nb₂O₁₂, In-substituted Li_5.5La₃Nb_1.75In_0.25O₁₂ and K-substituted Li_5.5La_2.75K_0.25Nb₂O₁₂ were prepared by solid-state reactions at 900, 950, and 1000 °C using appropriate amounts of corresponding metal oxides, nitrates and carbonates. The powder XRD data reveal that the In- and K-doped compounds are isostructural with the parent compound Li₅La₃Nb₂O₁₂. The variation in the cubic lattice parameter was found to change with the size of the dopant ions, for example, substitution of larger In³⁺(r_CN6: 0.79 Å) for smaller Nb⁵⁺ (r_CN6: 0.64 Å) shows an increase in the lattice parameter from 12.8005(9) to 12.826(1) Å at 1000 °C. Samples prepared at higher temperatures (950, 1000 °C) show mainly bulk lithium ion conductivity in contrast to those synthesized at lower temperatures (900 °C). The activation energies for the ionic conductivities are comparable for all samples. Partial substitution of K⁺ for La³⁺ and In³⁺ for Nb⁵⁺ in Li₅La₃Nb₂O₁₂ exhibits slightly higher ionic conductivity than that of the parent compound over the investigated temperature regime 25-300 °C. Among the compounds investigated, the In-substituted Li_5.5La₃Nb_1.75In_0.25O₁₂ exhibits the highest bulk lithium ion conductivity of 1.8×10⁻⁴ S/cm at 50 °C with an activation energy of 0.51 eV. The diffusivity (“component diffusion coefficient”) obtained from the AC conductivity and powder XRD data falls in the range 10⁻¹⁰-10⁻⁷ cm²/s over the temperature regime 50-200 °C, which is extraordinarily high and comparable with liquids. Substitution of Al, Co, and Ni for Nb in Li₅La₃Nb₂O₁₂ was found to be unsuccessful under the investigated conditions.     

B2O3-Bi2O3-ZnO-Al2O3玻璃助烧剂对BaTiO3陶瓷烧结条件、晶体结构和介电性能的影响

通过调节B₂O₃-Bi₂O₃-ZnO-Al₂O₃(BBZA)玻璃的添加量研究其对钛酸钡(BaTiO₃)陶瓷烧结条件、晶体结构和介电性能的影响。结果表明：添加适量的BBZA玻璃能够有效地将BaTiO₃陶瓷烧结温度由1 350℃降至950℃,并使其致密化。同时,添加BBZA玻璃后,BaTiO₃的晶体结构随着烧结温度的升高而发生转变(立方相→四方相)。另外,BBZA玻璃的引入使BaTiO₃陶瓷的居里峰得到了有效的抑制和拓宽。陶瓷微观形貌显示,玻璃相均匀分布在BaTiO₃晶粒表面。优化的BaTiO₃陶瓷制备条件如下：BBZA添加量(质量分数)为2.0%,烧结温度为950℃。在该条件下制备的BaTiO₃陶瓷介电常数达到1 364,介电损耗低至1.2%。     

Development of Fe3O4-poly(l-lactide) magnetic microparticles in supercritical CO2

The Fe₃O₄-poly(l-lactide) (Fe₃O₄-PLLA) magnetic microparticles were successfully prepared in a process of solution-enhanced dispersion by supercritical CO₂ (SEDS), and their morphology, particle size, magnetic mass content, surface atom distribution and magnetic properties were characterized. Indomethacin (Indo) was used as a drug model to produce drug-polymer magnetic composite microparticles. The resulting Fe₃O₄-PLLA microparticles with mean size of 803 nm had good magnetic property and a saturation magnetization of 24.99 emu/g. The X-ray photoelectron spectroscopy (XPS) test indicated that most of the Fe₃O₄ were encapsulated by PLLA, which indicated that the Fe₃O₄-PLLA magnetic microparticles had a core–shell structure. After further loading with drug, the Indo-Fe₃O₄-PLLA microparticles had a bigger mean size of 901 nm, and the Fourier transform infrared spectrometer (FTIR) analysis demonstrated that the SEDS process was a typical physical coating process to produce drug-polymer magnetic composite microparticles, which is favorable for drugs since there is no change in chemistry. The in vitro cytotoxicity test showed that the Fe₃O₄-PLLA magnetic microparticles had no cytotoxicity and were biocompatible, which means there is potential for biomedical application.     

Synthesis, crystal and magnetic structure of a novel brownmillerite-type compound Ca2Co1.6Ga0.4O5

The novel compound Ca₂Co_1.6Ga_0.4O₅ with brownmillerite (BM) structure has been prepared from citrates at 950 °C. The crystal structure of Ca₂Co_1.6Ga_0.4O₅ was refined, from neutron powder diffraction (NPD) data, in space group Pnma, , , , χ²=1.798, , R_wp=0.0378 and R_p=0.0292. On the basis of the NPD refinement the compound was found to be a G-type antiferromagnet (space group Pn^′m^′a) at room temperature, with the magnetic moments of cobalt atoms directed along chains of tetrahedra in the BM structure. Electron diffraction and electron microscopy studies revealed disorder in the crystallites, which can be interpreted as the presence of slabs with BM-type structure of Pnma and I2mb symmetry.