Photocatalytic activities of multilayered ZnO-based thin films prepared by sol–gel route: effect of SnO2 heterojunction layer

In present study, ZnO/SnO₂/ZnO/SnO₂/ZnO multi–layer, ZnO/SnO₂/ZnO triple layer and ZnO single layer films have been deposited on glass substrate by sol–gel dip–coating technique. The structural and optical properties of thin films have been investigated by X-ray diffractometer, UV–visible, photoluminescence spectroscopies and scanning electron microscopy. The structural analysis reveals structural inhomogeneities and different crystallite growth processes as function of number of deposited layers. A comparison between photocatalytic activity of zinc oxide samples toward photodegradation of phenol, 4-aminophenol and 4-nitrophenol has been performed under UV light irradiation. Experiments were conducted to study the effects of operational parameters on the degradation rate. Pseudo-first-order photodegradation kinetics was observed on all films and the reaction constants were determined. The results showed that the photocatalytic activity of ZnO multi–layer film was superior to that of the ZnO single- and triple-layer films. Differences in film efficiencies can be attributed to differences in crystallinity, surface morphology, defect concentration of oxygen vacancy and to presence of SnO₂ sublayer that may act as trap for electrons generated in the ZnO layer thus preventing electron–hole recombination. The results reveal that SnO₂ hetrojunction layers improve crystalline quality, optical and photocatalytic properties of ZnO multilayered films.     

Spectroelectrochemical Evaluation of a ZnO Optically Transparent Electrode Prepared by the Spin‐spray Technique

We present a novel zinc oxide (ZnO) optically transparent electrode (OTE) prepared by the spin‐spray technique for spectroelectrochemistry. The spin‐spray technique can deposit ZnO film at a low cost, high rate deposition, and at a low temperature (<100 °C) in a single step. This new technique provides good optical transparency and electrical conductivity for ZnO. The electrochemical and spectroelectrochemical properties of the ZnO electrode were investigated for varying thicknesses of ZnO using methylene blue as a redox indicator. A ZnO OTE chip that includes three electrodes on a glass chip was developed for thin‐layer spectroelectrochemistry. Moreover, the ZnO films were successfully applied in an electrochemical‐localized surface plasmon resonance (LSPR) method for methylene blue detection by using them as a transparent conducting substrate for loading gold nanoparticles.     

Effects of ZnO Buffer Layer Thickness on Properties of MgxZn1-xO Thin Films Deposited by MOCVD

High-quality MgxZn1-xO thin films were grown on sapphire（0001 ） substrates with a ZnO buffer layer of different thicknesses by means of metal-organic chemical vapor deposition. Diethyl zinc, bis-cyclopentadienyl-Mg and oxygen were used as the precursor materials. The crystalline quality, surface morphologies and optical properties of the Mg, Zn1-xO films were investigated by X-ray diffraction, atomic force microscopy and photoluminescence spectrometry. It was shown that the quality of the MgxZn1-xO thin films depends on the thickness of the ZnO buffer layer and an Mg, Zn1-xO thin film with a ZnO buffer layer whose thickness was 20 nm exhibited the best crystal-quality, optical properties and a flat and dense surface.     

RF magnetron sputtering of ZnO and Al-doped ZnO films from ceramic and nanopowder targets: a comparative study

Undoped zinc oxide (ZnO) and aluminium-doped zinc oxide (ZAO) thin films have been prepared on glass substrates by RF magnetron sputtering from ceramic and nanopowder targets at room temperature (RT). The effects of target nature on the properties of the films have been studied. The X-ray diffraction (XRD) patterns show that ZnO and Al-doped ZnO thin films are highly textured along the c-axis perpendicular to the surface of the substrate from either nanopowder or ceramic targets. From the SEM images, it appears that the surface morphologies of ZAO films exhibit difference from that of undoped ZnO films. All films exhibit a transmittance higher than 80% in the visible region. The optical band gap (E_g) of ZnO and ZAO films obtained from nanopowder target is higher than those prepared using ceramic target. In two cases, Al-doping leads to a larger optical band gap (E_g) of the films.     

Synthesis and characterization of ZnO nanowires by thermal oxidation of Zn thin films at various temperatures

In this research high-quality zinc oxide (ZnO) nanowires have been synthesized by thermal oxidation of metallic Zn thin films. Metallic Zn films with thicknesses of 250 nm have been deposited on a glass substrate by the PVD technique. The deposited zinc thin films were oxidized in air at various temperatures ranging between 450 °C to 650 °C. Surface morphology, structural and optical properties of the ZnO nanowires were examined by scanning electron microscope (SEM), X-ray diffraction (XRD), energy dispersive X-ray (EDX) and photoluminescence (PL) measurements. XRD analysis demonstrated that the ZnO nanowires has a wurtzite structure with orientation of (002), and the nanowires prepared at 600 °C has a better crystalline quality than samples prepared at other temperatures. SEM results indicate that by increasing the oxidation temperature, the dimensions of the ZnO nanowires increase. The optimum temperature for synthesizing high density, ZnO nanowires was determined to be 600 °C. EDX results revealed that only Zn and O are present in the samples, indicating a pure ZnO composition. The PL spectra of as-synthesized nanowires exhibited a strong UV emission and a relatively weak green emission.     

Preparation and characterization of nanocomposite ZnO–Ag thin film containing nano-sized Ag particles: influence of preheating,annealing temperature and silver content on characteristics

Nanocomposite ZnO–Ag thin film containing nano-sized Ag particles have been grown on glass substrate by spin-coating technique using zinc acetate dihydrate as starting precursor in 2-propanol as solvent and monoethanolamine as stabilizer. Silver nanoparticles were added in the ZnO sol using silver nitrate dissolved in ethanol-acetonitrile. Their structural, electrical, crystalline size and optical properties were investigated as a function of preheating, annealing temperature and silver content. The results indicated that the crystalline phase was increased with increase of annealing temperature up to 550 °C at optimum preheating temperature of 275 °C. Thermal gravimetric differential thermal analysis results indicated that the decomposition of pure ZnO and nanocomposite ZnO–Ag precursors occurred at 225 and 234 °C, respectively with formation of ZnO wurtzite crystals. The scanning electron microscopy and atomic force microscopy revealed that the surface structure (the porosity and grain size) of the ZnO–Ag thin film (the film thickness is about 379 nm) was changed compared to pure ZnO thin film. The result of transmission electron microscopy showed that Ag particles were about 5 nm and ZnO particles 58 nm with uniform silver nanoclusters. Optical absorption results indicated that optical absorption of ZnO–Ag thin films decreased with increase of annealing temperature. Nanocomposite ZnO–Ag thin films with [Ag] = 0.068 M and [Ag] = 0.110 M showed an intense absorption band, whose maximum signals appear at 430 nm which is not present in pure ZnO thin films. The result of X-ray photoelectron spectroscopy revealed that the binding energy of Ag 3d_5/2 for ZnO–Ag shifts remarkably to the lower binding energy compared to the pure metallic Ag due to the interaction between Ag and ZnO.     

Influence of substrate temperature on the structural and optical properties of crystalline ZnO films obtained by pulsed spray pyrolysis

In this work, we report on the structural and optical properties of ZnO films deposited by pulsed spray pyrolysis at relatively low temperatures, compatible with a large variety of substrates and processing technologies. Crystalline ZnO films were deposited onto glass substrates using zinc acetate dihydrate dissolved in distilled water with concentration of 0.2 M. The temperature of the substrate was varied in the range T_s = 473–673 K with ΔТ = 50 K. Effect of T_s were investigated by scanning electron microscopy, x‐ray diffraction and energy dispersive x‐ray, and optical spectroscopies. Also, the influence of T_s on the grain size, phase composition, texture quality, coherent scattering domain size, crystal lattice parameters, chemical composition, transmission coefficient, and the bang gap of the ZnO films were studied. X‐ray diffraction analysis revealed that films were polycrystalline with hexagonal phase and showed as preferential orientation (101) at T_s < 573 K and (100) and (002) at T_s > 573 K. Scanning electron microscopy (SEM) measurements showed that the substrate temperature has a strong effect on morphology of the films. Energy dispersive analysis revealed that ZnO films consisted of the non‐stoichiometric compounds. Optical measurements showed ZnO films to be highly transparent in the visible region, and optical band gap is shifting from 3.18 eV to 3.30 eV. Copyright © 2015 John Wiley & Sons, Ltd.     

Role of the interaction between forming nanocrystals and glass surface on the structure and properties of ZnO-based films

The interaction between glass surface and forming nanocrystals plays the important role in the formation of thin ZnO coatings crystal structure. The comparative study of the crystal structure of thin ZnO-based films and powders having similar chemical compositions was performed with the use of SEM, XRD analysis, optical, and luminescent spectroscopy. The influence of different coatings parameters (chemical composition, thickness) on the spectroscopic and morphological properties of thin films and powders reveals the structural features of the interaction between forming ZnO nanocrystals and glass surface. ZnO–SnO₂ coatings and powders were prepared by liquid polymer-salt technique. This method provides the close contact between the coatings’ precursors with a surface of the glass during both the nucleation and the initial growth stage of forming oxide crystals. The interaction of nanocrystals and substrate surface is responsible for the texture formation in the ZnO films and determines some features of their optical properties.     

In situ forced hydrolysis-assisted fabrication and photo-induced electrical property in sensor of ZnO nanoarrays

ZnO nanowhiskers are successfully fabricated on an anhydrous zinc acetate coated substrate by its in situ forced hydrolysis at the initial stage without pre-existing ZnO seeds or catalyst. HR-TEM clarified the formation mechanism that in situ forced hydrolysis of an anhydrous zinc acetate layer to ZnO nanocrystals at the initial stage promoted growth of ZnO nanowhiskers by heterogeneous nucleation and growth. ZnO nanowhiskers films show high transmittance over 80% in the visible range and bandgap energy of 3.29 eV. Porous semiconductor ZnO films show good photo-induced electrical properties after various concentrations of DNA molecules labeled with photoactive dye molecules were adsorbed. In situ forced hydrolysis-assisted technique at low temperature can be useful for the fabrication of optoelectronic devices with low cost and without using expensive catalyst.     

Effect of reagents mixing on the thermal behavior of sol-gel precursors for silica-based nanocomposite thin films

The paper presents, based on TG-DTG-DSC data, some results of the thermal decomposition of some complex sol-gel precursors used for the deposition of mesoporous ZnO/SiO₂ nanocomposite thin films for gas sensing applications. The effect chemical composition of the sol and reagents mixing during the sol preparation is discussed. The chemical nature of ZnO source (zinc acetate solid salt, zinc acetate alcoholic solution or ZnO nanopowder) used for the sol preparation significantly affects the thermal decomposition of complex precursor and the microstructure and properties of the nanocomposite thin films.     

Structure and morphology of nanostructured zinc oxide thin films Prepared by dip-vs. spin-coating methods

In this study, we use dipping and spinning methods to coat glass slides with sol-gel ZnO thin films, composed of zinc acetate dihydrate, monoethanolamine (MEA), de-ionized water and isopropanol. The effect of the annealing temperature on the structural morphology and optical properties of these films is investigated. These ZnO films were preheated at 275 °C for 10 min and annealed either at 350, 450 or 550 °C for 60 min. As-deposited films, formed by amorphous zinc oxide-acetate submicron particles, are transformed into a highly-oriented ZnO after thermal treatment. The surface morphology, phase structure and optical properties of the thin films were investigated by scanning electron microscopy, X-ray diffraction (XRD) and optical transmittance. Both techniques produced nanostructured ZnO thin films with well-defined orientation. The annealed films were transparent in the visible range with an absorption edge at about 375 nm and a transmittance of ca 85–90% with an average diameter of 40 nm. XRD results show the film was composed of polycrystalline wurtzite, with a preferential c-axis orientation of (002) and a single sharp XRD peak at 34.40, corresponding to the hexagonal ZnO. The grain size is increased by the annealing temperature. Both coating techniques create sol-gel ZnO films with the potential for application as transparent electrodes in optic and electronic devices.     

Studies on the Structure of Gel during Preparing ZnO Thin Films by Sol-gel Method

<正>Transparent thin films of ZnO have been prepared on ordinary glass substrates by the inorganic sol-gel method using citric acid as chelating agent and zinc nitrate as the starting material.A novel structure on zinc citrate complex was put forward by using DTA-TG and FT-IR absorbance spectrum of citrate gels.Phase formation,morphology and optical properties of ZnO films are investigated by XRD,AFM and UV-vis transmittance spectra.The experimental results show that ZnO thin films derived from zinc citrate sol-gel method showed a(002)oriented hexagonal wurtzite structure,good crystalline property,a uniform range of grain size(40 nm), smooth surface of films,band gap of 3.28 eV and optical transmittances ratio over 90%in the visible range.     

High efficiency ZnO nano sensor,fabrication and characterization

Ultra fine thin films of pure and SnO doped ZnO nanosensor were grown on gold digitated ceramic substrate from bis(2, 4- pentanedionate)dimethylethanolamine zinc (II) using bis(2, 4-pentanedionate) tin(II) chloride as a dopant by ultrasonic aerosol assisted chemical vapor deposition technique (UAACVD) at temperature range of 400–450 °C under oxygen atmosphere at 5 Pa pressure. The sensitivity, selectivity, fast recovery, and reliability test performed on nanosensor suggested that both doped and undoped ZnO thin films are suitable for detecting ethanol vapor in the temperature range of at 60 to 150 °C, whereas at room temperature (25 °C) response and recovery time of the sensor increases many folds compared to 60 °C. Sensitivity of the ZnO sensor shows linear relationship with the increase of gas concentration. Electrical properties show that 1 % SnO doped ZnO enhanced the sensitivity of the film drastically and thus improved its detecting efficiency. Physico-chemical techniques like, CHNS-O, atomic absorption analyzer, and infra red and multinuclear nuclear magnetic resonance spectrometers were used for precursor characterization. X-ray diffractometer, scanning electron microscope, sigma scan analyzer and energy dispersive x-ray techniques were used for thin film characterization.     

Microwave assisted hydrothermal synthesis of zinc hydroxystannate films on glass substrates

Zinc stannate (ZnSnO₃, Zn₂SnO₄) and its precursor, i.e. zinc hydroxystannate (ZnSn(OH)₆), have emerged as technological nanomaterials for different applications. Herein, we report synthesis of polycrystalline zinc hydroxystannate (ZHS) film on glass substrate through facile and efficient microwave assisted hydrothermal growth. The method comprises of three steps; deposition of ZnO seed films on glass substrates through spray pyrolysis, growth of ZnO nanorod arrays over the seeded substrates through microwave assisted hydrothermal method and transformation of the as-synthesized ZnO nanorod arrays into the ZHS films through microwave treatment in aqueous precursor solution of SnCl₄ and NaOH. The films were characterized by energy dispersive X-ray spectroscopy, X-ray diffraction and scanning electron microscopy (SEM). The films contain two crystalline phases namely ZnO with [002] as preferred growth direction and ZnSn(OH)₆ preferably grown along [200] vector. The obtained ZHS films consist of crystals of exclusively cubic structure with sizes up to several microns. Microwave irradiation time, NaOH/SnCl₄ molar ratio, concentration of Sn⁴⁺ ions, and the applied power are the four parameters which influence the size, aerial density and growth rate of ZHS microblocks.     

Improved optical and electrical properties of sol–gel-derived boron-doped zinc oxide thin films

Sol–gel spin-coating was used to grow zinc oxide (ZnO) thin films doped with 0–2.5 at.% B on quartz substrates. The structural, optical, and electrical properties of the thin films were investigated using field-emission scanning electron microscopy, X-ray diffraction (XRD), photoluminescence (PL), ultraviolet–visible spectroscopy, and van der Pauw Hall-effect measurements. All the thin films had deposited well onto the quartz substrates and exhibited granular morphology. The average crystallite size, lattice constants, residual stress, and lengths of the bonds in the crystal lattice of the thin films were calculated from the XRD data. The PL spectra showed near-band-edge (NBE) and deep-level emissions, and B doping varied the PL properties and increased the efficiency of the NBE emission. The optical transmittance spectra for the undoped ZnO and boron-doped zinc oxide (BZO) thin films show that the optical transmittance of the BZO thin films was significantly higher than that of the undoped ZnO thin films in the visible region of the spectra and that the absorption edge of the BZO thin films was blue-shifted. In addition, doping the ZnO thin films with B significantly varied the absorption coefficient, optical band gap, Urbach energy, refractive index, extinction coefficient, single-oscillator energy, dispersion energy, average oscillator strength, average oscillator wavelength, dielectric constant, and optical conductivity of the BZO thin films. The Hall-effect data suggested that B doping also improved the electrical properties such as the carrier concentration, mobility, and resistivity of the thin films.     

Facile synthesis of spray pyrolyzed ZnO/NiO nanocomposites thin films

Abstract

This study reviews ZnO, NiO, and ZnO/NiO nanocomposites thin films deposition using the Spray Pyrolysis Technique (S.P.T). The thin films were deposited onto ordinary glass substrates heated at 500?°C from aqueous solutions of zinc chloride and nickel chloride precursors dissolved in distilled water. The structural, morphological, and optical properties of the ZnO, NiO, and ZnO/NiO thin films have been studied by X-ray diffraction, scanning electron microscopy, Raman spectroscopies, and so on. The optical band gaps are 3.3 and 3.5?eV for ZnO and NiO thin films, respectively obtained by UV–Vis spectroscopy. However, the optical band gaps of ZnO/NiO nanocomposites thin films, are noticeable out of the range (3.4–3.64?eV).     

Structural,optical and photoelectron spectroscopic studies of nano/micro ZnO:Cd rods synthesized via sol-gel route

Thin films of cadmium doped zinc oxide rod like microstructure have been synthesized by a very simple sol-gel dip coating technique. Sols were prepared from hydrated zinc oxide precursor and 2-methoxyethanol solvent with monoethanolamine as a sol stabilizer. XRD pattern confirmed the hexagonal wurtzite structure of the deposited ZnO films. Surface morphologies of the films have been studied by a scanning electron microscope and an atomic force microscope, which confirmed that the films are composed of densely packed randomly oriented nano/submicron rods with diameter in the range 300–400 nm having various lengths. We proposed a possible growth mechanism for this rodlike structure. X-ray photoelectron spectroscopic study was used to determine the binding energies and the Zn 2p3/2, Cd 3d5 and O 1s peaks in the XPS spectra were located at 1021.08 eV, 404.6 eV and 529.8 eV respectively, which confirmed the Cd doping in ZnO. Cadmium content in the film was estimated both from energy dispersive X-ray analysis and XPS measurement. Band gap energy determined from optical transmittance spectra systematically varied from 3.28 eV to 3.15 eV for 0% to 5.6% of Cd doping. Urbach parameter determined from the band tail of the transmittance spectra showed that it increased with doping percentage and this parameter for a fixed cadmium doping level decreased with increase of temperature.     

The influence of diffusion temperature on the structural, optical and magnetic properties of manganese-doped zinc oxysulfide thin films

We investigated the structural, optical and magnetic properties of Mn-doped zinc oxysulfide films. Zn(O,S) films were deposited by a spray pyrolysis method on glass substrate. A thin Mn layer evaporated on these films served as the source for the diffusion doping. The XRD pattern of undoped films revealed the presence of two wurtzite phases corresponding to ZnS and ZnO with a strong preferred orientation along the ZnS (0 0 2) hexagonal plane direction. SEM showed a similar surface morphology for the undoped and Mn-doped films, displaying regular arrays of hexagonal micro-rods perpendicular to the substrate. The optical transmission measurements showed that both undoped and Mn diffusion-doped films had a low average transmittance less than about 10%. The gap energy is decreased from 3.42 to 3.33 eV upon annealing at 400 °C. Photoluminescence studies at 300 K show that the incorporation of manganese leads to a decrease of deep level band intensity compared to undoped sample. Clear ferromagnetic loops were observed for the Mn-doped Zn(O,S) films, which might be due to the presence of point defects.     

Effects of In, Al and Sn dopants on the structural and optical properties of ZnO thin films

Effect of In, Al and Sn dopants on the optical and structural properties of ZnO thin films have been investigated by X-ray diffraction technique and optical characterization method. X-ray diffraction patterns confirm that the films have polycrystalline nature. The thin films have (002) as the preferred orientation. This (002) preferred orientation is due to the minimal surface energy which the hexagonal structure, c-plane to the ZnO crystallites, corresponds to the densest packed plane. The grain size values of the films are found to be 29.0, 35.2 and 39.5 nm for In, Al and Sn doped ZnO thin films, respectively. The optical band gaps of the films were calculated. The absorption edge shifts to the lower wavelengths with In, Al and Sn dopants. The inclusion of dopant into films expands also width of localized states as E(UIn)>E(UAl)>E(USn). The refractive index dispersion curves obey the single oscillator model. The dispersion parameters and optical constants of the films were determined. These parameters changed with In, Al and Sn dopants.     

Elaboration of ZnO Thin Films with Preferential Orientation by a Soft Chemistry Route

Microcrystalline ZnO films presenting well-defined and tunable orientation were obtained by spin coating of alcoholic sols by two different approaches, based on controlled hydrolysis-condensation of Zn-ethanolamine complexes. As-deposited films are formed by amorphous zinc oxide-acetate submicronic particles, which are transformed into oriented ZnO after thermal treatment. The orientation of ZnO depends on the synthesis method, and the solvent. While in ethanol and [Zn] = 0.05 mol·L^–1, films consist of rectangular platelets oriented with the (100) planes parallel to the substrate (a//n), the orientation of the particles changes to (c//n) for systems in 2-methoxyethanol (2-ME) and [Zn] = 0.75 mol·L^–1. A study of chemical factors that influence the orientation (precursor, solvent, MEA/Zn ratio, concentration, coating parameters, heat treatment) is presented.