Study on chemisorption of H<Subscript>2</Subscript>, O<Subscript>2</Subscript>, CO and C<Subscript>2</Subscript>H<Subscript>4</Subscript>on Pt-Ag/SiO<Subscript>2</Subscript>catalysts by microcalorimetry and FTIR

Adsorption microcalorimetry has been employed to study the interaction of ethylene with the reduced and oxidized Pt-Ag/SiO₂catalysts with different Ag contents to elucidate the modified effect of Ag towards the hydrocarbon processing on platinum catalysts. In addition, microcalorimetric adsorption of H₂, O₂, CO and FTIR of CO adsorption were conducted to investigate the influence of Ag on the surface structure of Pt catalyst. It is found from the microcalorimetric results of H₂and O₂adsorption that the addition of Ag to Pt/SiO₂leads to the enrichment of Ag on the catalyst surface which decreases the size of Pt surface ensembles of Pt-Ag/SiO₂catalysts. The microcalorimetry and FTIR of CO adsorption indicates that there still exist sites for linear and bridged CO adsorption on the surface of platinum catalysts simultaneously although Ag was incorporated into Pt/SiO₂. The ethylene microcalorimetric results show that the decrease of ensemble size of Pt surface sites suppresses the formation of dissociative species (ethylidyne) upon the chemisorption of C₂H₄on Pt-Ag/SiO₂. The differential heat vs. uptake plots for C₂H₄adsorption on the oxygen-preadsorbed Pt/SiO₂and Pt-Ag/SiO₂catalysts suggest that the incorporation of Ag to Pt/SiO₂could decrease the ability for the oxidation of C₂H₄.     

Synthesis of dimethyl ether from CO and H<Subscript>2</Subscript>

Thermodynamic conditions for synthesizing dimethyl ether from synthesis gas are determined. The optimum conditions of the process are as follow: T ∼ 300°C at p = 3 MPa for two catalysts loaded into the reactor: methanol synthesis catalyst (Katalco-58) and catalyst of methanol dehydration to dimethyl ether (γ-Al₂O₃). The changes that occur with the catalysts during this process are demonstrated by electron scanning microscopy.     

An efficient,one-pot synthesis of trithiocarbonates from alcoholic tosylates using the Cs<Subscript>2</Subscript>CO<Subscript>3</Subscript>/CS<Subscript>2</Subscript> system

A single-step novel protocol for the preparation of symmetrical trithiocarbonates from a corresponding variety of primary, secondary, and tertiary alcoholic tosylates using the Cs₂CO₃/CS₂ system, was developed. This protocol is mild and more efficient than the reported methods. Correspondence: Devdutt Chaturvedi, Bio-Organic Chemistry Division, Indian Institute of Integrative Medicine, Canal Road, Jammu-Tawi-18000, J&K, India.     

Synthesis,characterization, and biphasic ionic liquid media 1-hexene hydrogenation reaction of RuCl<Subscript>2</Subscript>(DMSO)<Subscript>2</Subscript>(NC<Subscript>5</Subscript>H<Subscript>4</Subscript>CO<Subscript>2</Subscript>Na-3)<Subscript>2</Subscript>

RuCl₂(DMSO)₂(NC₅H₄CO₂Na-3)₂ is very soluble in the ionic liquid (IL) 1-n-butyl-3-methylimidazolium tetrafluoroborate, [(BMIM)BF₄]. The complex was prepared by reacting RuCl₂(DMSO)₄ with NC₅H₄CO₂Na-3, sodium nicotinate, in toluene, and was characterized by spectroscopic methods. The complex catalyzes the hydrogenation of 1-hexene (600 psi H₂, 100 °C) in a two-phase system consisting of cyclohexane/[(BMIM)BF₄] with 75% conversion in 24 h and modest substrate isomerization. The complex shows good stability and can be reused several times with little loss in activity.     

FT-IR study on CO<Subscript>2</Subscript> adsorbed species of CO<Subscript>2</Subscript> sorbents

The stability of amine-functionalized silica sorbents prepared through the incipient wetness technique with primary, secondary, and tertiary amino organosilanes was investigated. The prepared sorbents were exposed to different gaseous streams including CO₂/N₂, dry CO₂/air with varying concentration, and humid CO₂/air mixtures to demonstrate the effect of the gas conditions on the CO₂ adsorption capacity and the stability of the different amine structures. The primary and secondary amine-functionalized adsorbents exhibited CO₂ sorption capacity, while tertiary amine adsorbent hardly adsorbed any CO₂. The secondary amine adsorbent showed better stability than the primary amine sorbent in all the gas conditions, especially dry conditions. Deactivation species were evaluated using FT-IR spectra, and the presence of urea was confirmed to be the main deactivation product of the primary amine adsorbent under dry condition. Furthermore, it was found that the CO₂ concentration can affect the CO₂ sorption capacity as well as the extent of degradation of sorbents.     

Hydrogen generation from H<Subscript>2</Subscript>O/H<Subscript>2</Subscript>O<Subscript>2</Subscript>/MnWO<Subscript>4</Subscript> system

Hydrogen gas as a clear energy resource was found to be largely bubbled from a H₂O/H₂O₂/MnWO₄ system. MnWO₄ powder was fabricated by an aqueous reaction method. The powder was characterized with X-ray diffraction (XRD), transmission electron microscope (TEM), and X-ray photoelectron spectrometry (XPS). The efficiency of the hydrogen generation increases with an increase in initial pH in the appropriate range, H₂O₂ proportion, MnWO₄ proportion, and intensity of light resource. Calcining at 400 °C for 1 h can make the MnWO₄ powder synthesized by an aqueous reaction more effective for H₂ generation and more stable in higher initial pH. The MnWO₄ catalyst shows a long-term stability for photocatalytic H₂ generation. A mechanism was suggested for the hydrogen generation from the H₂O/H₂O₂/MnWO₄ system together with XPS analysis.     

Hybrid catalytic effects of K<Subscript>2</Subscript>CO<Subscript>3</Subscript> on the synthesis of salicylic acid from carboxylation of phenol with CO<Subscript>2</Subscript>

As a base-promoted Kolbe–Schmitt carboxylation reaction, the mechanism of synthesis of salicylic acid derivatives from phenols with CO₂ in the industry is still unclear, even up to now. In this paper, synthesis of 3,6-dichloro salicylic acid (3,6-DCSA) from 2,5-dichloro phenoxide and CO₂ was investigated in the presence of K₂CO₃. We show the reaction can proceed by itself, but it goes at a slower rate as well as a lower yield, compared to the case with the addition of K₂CO₃. However, the yield of 3,6-DCSA is only minorly affected by the size of K₂CO₃, which cannot be explained from the view of catalytic effect. Therefore, K₂CO₃ may on one hand act as a catalyst for the activation of CO₂ so that the reaction can be accelerated, while on the other hand, it also acts as a co-reactant in deprotonating the phenol formed by the side reaction to phenoxide, which is further converted to salicylate.     

Structure of heteroassociates formed in the HF-(C<Subscript>2</Subscript>H<Subscript>5</Subscript>)<Subscript>2</Subscript>O liquid system

The aim of this work was to determine the structure of stable heteroassociates (HAs) with the stoichiometric ratios 1:2, 2:1, and 4:1 of molecules formed in the HF-(C₂H₅)₂O binary liquid system. The stretching frequencies of HF molecules found for each HA using a special procedure for processing IR spectra were compared with the calculated frequencies V HF of the stable molecular complexes (HF)_m ((C₂H₅)₂O)_n (m = 1, 2, 4, 8; n = 1, 2) with different topologies by the density functional method (B3LYP/6-31++G(d,p)). As a result, it was shown that the most stable (among H-bonded complexes with the same stoichiometric ratio of molecules) HAs HF((C₂H₅)₂O)₂, (HF)₄ ((C₂H₅)₂O)₂, and (HF)₈-((C₂H₅)₂O)₂ formed in HF solutions in diethyl ether. All of them had a cyclic structure and a common peculiarity of structure: only one lone electron pair of the oxygen atom of the (C₂H₅)₂O molecules is involved in hydrogen bonding.     

Transition metal salts of H<Subscript>4</Subscript>PMo<Subscript>11</Subscript>VO<Subscript>40</Subscript> for efficient H<Subscript>2</Subscript>S removal in the liquid redox process

Several transition metal (Cu²⁺, Fe³⁺, Zn²⁺, Mn⁴⁺, and Cr⁶⁺) salts of H₄PMo₁₁VO₄₀ were prepared and their solutions were used initially for H₂S removal in the liquid redox process. H₂S removal tests were performed by dynamic absorption experiments. Among these polyoxometalates, that with the Cu²⁺ cation was found to have pronounced H₂S removal performance with the removal efficiency of up to 98%. The relevant oxidative desulfurization mechanism and the role of Cu²⁺ were studied.     

Synthesis and characterization of a new monophosphate (C<Subscript>6</Subscript>H<Subscript>16</Subscript>N<Subscript>2</Subscript>)(H<Subscript>2</Subscript>PO<Subscript>4</Subscript>)<Subscript>2</Subscript>

Chemical preparation, crystal structure, and NMR spectroscopy of a new trans-2,5-dimethylpiperazinium monophosphate are given. This new compound crystallizes in the triclinic system, with the space group P-1 and the following parameters: a = 6.5033(3), b = 7.6942(4), c = 8.1473(5) Å, α = 114.997(3), β = 92.341(3), γ = 113.136(3), V = 329.14(3) ų, Z = 1, and D_x = 1.565 g cm^?3. The crystal structure has been determined and refined to R = 0.030 and R _w(F ²) = 0.032 using 1558 independent reflections. The structure can be described as infinite [H₂PO₄] _n ^n? chains with (C₆H₁₆N₂)²⁺ organic cations anchored between adjacent polyanions to form columns of anions and cations running along the b axis. This compound has also been investigated by IR, thermal, and solid-state, ¹³C and ³¹P MAS NMR spectroscopies and Ab initio calculations.     

A review on nanomaterial-based electrochemical sensors for H<Subscript>2</Subscript>O<Subscript>2</Subscript>, H<Subscript>2</Subscript>S and NO inside cells or released by cells

The incorporation of nanomaterials into electrochemical sensors is an attractive approach towards the improvement of the sensitivity of amperometry and also can provide improved sensor selectivity and stability. This review (with 137 references) details the current state of the art and new trends in nanomaterial-based electrochemical sensing of hydrogen peroxide (H₂O₂), hydrogen sulfide (H₂S) and nitric oxide (NO) in cells or released by cells. The article starts with a discussion of the significance of the three analytes, and this is followed by three sections that summarize the electrochemical detection schemes for H₂O₂, H₂S and NO. Each section first summarizes the respective physiological roles, and then reviews electrochemical sensors based on the use of carbon nanomaterials, noble metal nanomaterials, metal oxide nanomaterials, and layered doubled hydroxides. The materials are compiled in three tables along with figures of merit for the various sensors.

Open image in new window

Graphical abstract Nanomaterial-based electrochemical sensors for Reactive oxygen species (H₂O₂), Reactive nitrogen species (NO) and Reactive hydrogen sulfide species (H₂S) inside cells or released by cells.

     

Multifunctional iron thiocarboxylate complexes: synthesis,reactivity and structure of CpFe(CO)<Subscript>2</Subscript>SCO-3,5-C<Subscript>6</Subscript>H<Subscript>4</Subscript>(COCl)<Subscript>2</Subscript>

A controlled substitution reaction of the chlorine atoms of 1,3,5-benzenetricarbonyl trichloride by the organoiron fragment (CpFe(CO)₂S) has been achieved. The complexes CpFe(CO)₂SCO-3,5-C₆H₃(COCl)₂ (1), 1,3-[CpFe(CO)₂SCO]₂-5-C₆H₃COCl (2) and 1,3,5-[CpFe(CO)₂SCO]₃C₆H₃ (3) were prepared from the reaction of (μ-S _x )[CpFe(CO)₂]₂ (x = 3, 4) with 1,3,5-C₆H₃(COCl)₃ in a 1:1, 2:1, or 3:1 metal to ligand molar ratio. The reactions of (1) with amines, thiols, and carboxylic acids produce the trifunctional mono-iron complexes CpFe(CO)₂SCO-3,5-C₆H₃(COY)₂ [Y = NR₂ (4), SR (5), OCOR (4)]. The X-ray structure determination of (1) is reported.     

X-ray photoelectron study of the interaction of H<Subscript>2</Subscript> and H<Subscript>2</Subscript>+O<Subscript>2</Subscript> mixtures on the Pt/MoO<Subscript>3</Subscript> model catalyst

The effects of H₂ and H₂ + O₂ gas mixtures of varying composition on the state of the surface of the Pt/MoO₃ model catalyst prepared by vacuum deposition of platinum on oxidized molybdenum foil were investigated by X-ray photoelectron spectroscopy (XPS) at room temperature and a pressure of 5–150 Torr. For samples with a large Pt/Mo ratio, the XP spectrum of large platinum particles showed that the effect of hydrogen-containing mixtures on the catalyst was accompanied by the reduction of molybdenum oxide. This effect results from the activation of molecular hydrogen due to the dissociation on platinum particles and subsequent spill-over of hydrogen atoms on the support. The effect was not observed at low platinum contents in the model catalyst (i.e., for small Pt particles). It is assumed for the catalyst that the loss of its hydrogen-activating ability is a consequence of the formation of platinum hydride. Possible participation of platinum hydride as intermediate in hydrogen oxidation to H₂O₂ is discussed.     

Structure and some properties of [UO<Subscript>2</Subscript>(SeO<Subscript>4</Subscript>)(C<Subscript>5</Subscript>H<Subscript>12</Subscript>N<Subscript>2</Subscript>O)<Subscript>2</Subscript>(H<Subscript>2</Subscript>O)]

The complex [UO₂(SeO₄)(C₅H₁₂N₂O)₂(H₂O)] (I) was synthesized and studied by thermal analysis, IR spectroscopy, and X-ray crystallography. The crystals are orthorhombic: a = 13.1661(3) Å, b = 16.4420(5) Å, c = 17.4548(6) Å, Pbca, Z = 8, R = 0.0423. The structural units of crystal I are chains with the composition coinciding with that of the compounds of the AB₂M ₃ ¹ crystal chemical group of the uranyl complexes (A = UO ₂ ²⁺ , B² = SeO ₄ ^2? , M¹ = C₅H₁₂N₂O and H₂O).     

Hydrothermal synthesis and crystal structure of [Ni(Bptc)<Subscript>2</Subscript>(Bimb)<Subscript>2</Subscript>(H<Subscript>2</Subscript>O)<Subscript>2</Subscript>]

In the compound [Ni(Bptc)₂(Bimb)₂(H₂O)₂] (I), where H₄Bptc is 3,3′,4,4′-biphenyltetracarboxylic acid; Bimb is 4,4′-bis(1-imidazolyl)biphenyl), Ni(II) has a distorted octahedral coordination geometry, which was bonded with two N atoms from two Bimb ligands, two O atoms from two H₂Bptc²⁻ ligands and two water O atoms. The crystal structure of compound I is stabilized by the π-π-stacking and hydrogen bonds interaction.     

Biological Xenogenic Vessel Prostheses: Effect of H<Subscript>2</Subscript>O/CO<Subscript>2</Subscript> and EtOH Media on the Structure and Mechanical Properties of the Bovine Jugular Veins

The effect of the H₂O/CO₂ and EtOH/CO₂ media at pressures and temperatures corresponding to the formation of supercritical (sc) carbon dioxide on the structure and mechanical properties of bovine jugular veins was studied for the first time. Treatment of bovine jugular veins in an sc-CO₂ + ethanol or sc-CO₂ + water medium considerably devitalized the tissue and increased the tissue elasticity, which allows considering the treated veins as promising vascular grafts with expected high capacity to suppress calcification and good hemodynamic properties.     

PdCl<Subscript>2</Subscript>/DABCO-catalyzed direct arylation of 2-hydroxybenzaldehydes in H<Subscript>2</Subscript>O

In this paper the successful application of DABCO both as base and as ligand for efficient coupling reactions of aryl iodides and bromides with 2-hydroxybenzaldehydes in the presence of catalytic amounts of PdCl₂ in water as solvent was introduced.