Toward an arsenic analogue of Hittorf's phosphorus: mixed pnicogen chains in Cu(2)P(1.8)As(1.2)I(2)

The new compound Cu(2)P(1.8)As(1.2)I(2), with neutral, mixed pnicogen chains, has been synthesized from a stoichiometric combination of CuI, P, and As heated in vacuo at 550 degrees C. Cu(2)P(1.8)As(1.2)I(2) represents substitution of 40% of P in Cu(2)P(3)I(2) by As, with the As predominantly occupying "roof" positions in the tubular chains. The mixed pnicogen modification demonstrates increased stability (T(d) = 330 degrees C) relative to Cu(2)P(3)I(2) (T(d) = 290 degrees C) but a similar optical band gap (E(g) approximately 1.2 eV). Crystallographic data: Cu(2)P(1.8)As(1.2)I(2), monoclinic P2(1)/c, a = 15.477(3) A, b = 13.200(3) A, c = 15.421(3) A, beta = 115.406(4) degrees, Z = 16 (T = 293 K).     

Structure-property correlations in solid solutions of (CuI)8P12-xAsx, 2.4< or = x < or =6.6

A series of P/As mixed pnicogen phases of composition (CuI)(8)P(12-x)As(x), in which x = 2.4, 4.2, 4.8, 5.4, and 6.6, have been synthesized and characterized by X-ray single crystal and powder diffraction, solid-state NMR spectroscopy, thermal gravimetric analysis, and impedance spectroscopy. These materials are isostructural to (CuI)(8)P(12) and consist of neutral, tubular P/As mixed pnicogen chains associated with Cu(I) and I(-) ions. The As is distributed throughout the pnicogen chains; however, the "roof" sites of the [P8] cage show preferred occupation by As relative to the other sites. Accordingly, the change in cell volume is not a linear function of the As incorporation. Solid-state (31)P NMR spectroscopy of the 40 % As incorporated sample are consistent with the X-ray structural model, with extensive broadening due to (31)P-(75)As coupling and site disorder, and a change in the chemical shifts of the resonances due to the As substitution into the lattice. The degree of copper ion site disorder, probed by single-crystal X-ray diffraction, increases with increasing As content. Although very little change is observed in the copper ionic conductivity of polycrystalline samples, which ranges from 1.8-5.1 x 10(-6) S cm(-1) for (CuI)(8)P(12-x)As(x), x = 0, 4.2, 5.4; a single crystal (x = 4.8) measured along the needle axis has a conductivity of 1.7 x 10(-3) S cm(-1) at 128 degrees C. This represents an order of magnitude improvement in conductivity over (CuI)(8)P(12) at the same temperature.     

A mixed-valence coordination polymer featuring two-dimensional ferroelectric order: {[Cu(I)4Cu(II)(Et2dtc)2Cl3][Cu(II)(Et2dtc)2]2(FeCl4)}n (Et2dtc- = diethyldithiocarbamate)

The first mixed-valence coordination polymer indicating ferroelectric properties, {[CuI4CuII(Et2dtc)2Cl3][CuII(Et2dtc)2]2(FeCl4)}n (Et2dtc- = diethyldithiocarbamate), has been synthesized and crystallographically characterized. This complex has a two-dimensional infinite square lattice structure, including both Cu(I) and Cu(II) ions, which is confirmed by XPS and SQUID measurements. In addition, the ferroelectric behaviors are revealed by the dielectric measurements with a LCR meter and a ferroelectric tester.     

Synthesis of an unprecedented bicapped adamantoid [Cu6(mu2-I)(mu3-I)4(mu4-I)(m-tolyl3P)4(CH3CN)2] cluster

The reaction of copper(I) iodide with tri-m-tolylphosphine (m-tolyl(3)P) in acetonitrile yielded the cluster [Cu(6)(mu2-I)(mu3-I)4(mu4-I)(m-tolyl(3)P)4(CH(3)CN)2] (1), with a bicapped adamantoid geometry. In this compound, four Cu atoms are coordinated to four terminally bonded m-tolyl(3)P ligands, two Cu atoms are bonded to two CH(3)CN ligands, and iodide ligands have mu2-I, mu3-I, and mu4-I bonding modes. This compound has four CuI(3)P and two CuI(3)N cores, and geometry around each Cu center is distorted tetrahedral.The polarizable iodide ligand and the position of the methyl group in the phenyl ring attached to the P atom appear to have played the pivotal role in the formation of monomeric bicapped adamantoid geometry, which is unique in copper chemistry.     

Formation of {Cu6[S2P(OC2H5)2]6} on Cu2S surfaces from aqueous solutions of the KS2P(OC2H5)2 collector: scanning electron microscopy and solid-state 31P cross-polarization/magic angle spinning and static 65Cu NMR studies

The interactions of synthetic chalcocite surfaces with diethyldithiophosphate, potassium salt, K[S2P(OC2H5)2], were studied by means of 31P cross-polarization/magic angle spinning (CP/MAS) NMR spectroscopy and scanning electron microscopy (SEM). To identify the species formed on the Cu2S surfaces, a polycrystalline {CuI6[S2P(OC2H5)2]6} cluster was synthesized and analyzed by SEM, powder X-ray diffraction techniques and solid-state 31P CP/MAS NMR and static 65Cu NMR spectroscopy. 31P chemical shift anisotropy (CSA) parameters, delta(cs) and eta(cs), were estimated and used for assigning the bridging type of diethyldithiophosphate ligands in the {CuI6[S2P(OC2H5)2]6} cluster. The latter data were compared to 31P CSA parameters estimated from the spinning sideband patterns in 31P NMR spectra of the collector-treated mineral surfaces: formation of polycrystalline {CuI6[S2P(OC2H5)2]6} on the Cu2S surfaces is suggested. The second-order quadrupolar line shape of 65Cu was simulated, and the NMR interaction parameters, CQ and etaQ, for the copper(I) diethyldithiophosphate cluster were obtained.     

Synthesis, structure, spectroscopic properties, and photochemistry of homo- and heteropolynuclear copper(I) complexes bridged by the 2,5-bis(2-pyridyl)pyrazine ligand

Cu(I)-Cu(I) and Cu(I)-Ru(II) dinuclear complexes bridged by the 2,5-bppz (2,5-bis(2-pyridyl)pyrazine) ligand have been prepared and characterized including the X-ray crystallographic study of the dinuclear [{CuI(PPh3)2}2(mu-2,5-bppz)](PF6)2)2CH3Cl complex: a = 13.974(2), b = 13.993(2), c = 13.537(2) A; alpha = 101.98(1), beta = 103.22(1), gamma = 113.90(1) degrees ; triclinic, P, Z = 1. The trinuclear [{(bpy)2RuII(mu-2,5-bppz)}2CuI](PF6)5 complex was also prepared, and the structure of the complex in solution was studied by spectrometric titration. The dinuclear Cu(I) complex and [(bpy)2RuII(mu-2,5-bppz)CuI(PPh3)2](PF6)5 show photoluminescence in the solid state, which should arise from MLCT states. Photochemical oxidation of the trinuclear RuII2CuI complex occurs in the presence of oxygen to give a RuII2CuII complex. The MLCT states and the redox reaction in the excited state are discussed.     

Investigation into the formation of supramolecular compounds from mixed As/S-ligand complexes [(Cp*Mo)2As2S3] (Cp* = C5Me5) and copper halides

The coordination behavior of [(Cp*Mo)2As2S3] (3) (Cp* = C5Me5) toward Cu(I) halides was investigated. One dimensional polymers of the general formula [(Cp*Mo)2As2S3(CuHal)2]n (Hal = Cl, 4; Br, 5) and an oligomer of composition [{(Cp*Mo)2As2S3}3(CuI)7] (6) formed upon the reaction of 3 with the corresponding copper halide. All of the compounds were characterized by ESI-MS, elemental analysis, and single-crystal X-ray crystallography. The solid-state structures of 4 and 5 are isostructural and contain 1D S-shaped chains. This peculiar folding is achieved by alternating planar and folded Cu2Hal2 rings linked together by the central monosulfide bridge of the middle deck of the organometallic unit. The structure of 6 is characterized by a novel [CuI]7 aggregate, which forms a very flat Cu6I3S3 bowl along with three integrated peripheral [(Cp*Mo)2As2S3] building blocks. In contrast to earlier findings, the middle deck of the organometallic units consists in all structures of two trapezoidal AsS dumbbells and one monosulfide ligand.     

Dinuclear Cu(I) complexes of 1,2,4,5-tetra(7-azaindolyl)benzene: persistent 3-coordinate geometry, luminescence, and reactivity

Five Cu(I) complexes [Cu2(ttab)(CH3CN)2][BF4]2 (1), [Cu(2)(ttab)(PPh3)2][BF4]2 (2), [Cu2(ttab)I2] (3), [Cu2(ttab)(I3)2] (4), and [Cu2(ttab)(I)BF4]n (5) with 1,2,4,5-tetra(7-azaindolyl)benzene (ttab) have been synthesized and characterized. The structures of compound 1, 2, 4, and 5 have been determined by single-crystal X-ray diffraction analyses, which established that 1, 2, and 4 are discrete dinuclear Cu2 compounds while compound 5 is a 1D coordination polymer with the I- ligand bridging two dinuclear Cu2 units. The ttab ligand in all four complexes adopts a 1,3-chelation mode. The Cu(I) center in all complexes is three-coordinate. Close contact between the Cu(I) center and the benzene ring in the ttab ligand was observed in all four structures, which is believed to play a role in stabilizing the three-coordinate geometry of the Cu(I) center. The crystals of 1, 2, and 5 contain channels in the lattice that host solvent molecules such as CH2Cl2 and toluene. Fluorescent measurements established that, in solution, compounds 1-3 display weak blue luminescence which originates from the ttab but is significantly red-shifted and has a much lower emission intensity, compared to the free ttab ligand. The application of compound 1 in C-N cross-coupling reactions was examined by using the reaction of phenyl halides with imidazole as a model system. For the reaction with phenyl iodide, 1 was found to be as effective a catalyst as the CuI/1,10-phenanthroline system. For the reaction with phenyl bromide, 1 is less effective than the CuI/1,10-phenanthroline system. Compound 1 reacts with O2 gas, as established by UV-vis spectra, but the oxidized products have not been characterized.     

Synthesis and Crystal Structure of [MoOS_3Cu_3I(dmpzm)_2]·2(MeCN)_(0.5) (dmpzm=Bis(3,5-dimethylpyrazolyl)methane)

1 INTRODUCTION The synthesis of molybdenum-copper-sulfur clus- ters from the preformed clusters with certain nitro- gen donor ligands remains attractive due to their rich chemistry and electro/photonic properties[1~6]. How- ever, the third-order nonlinear optical performances of these Mo/Cu/S clusters have been limited due to their relatively low solubility in common organic solvents[5]. One possible way to tackle this problem is to introduce bulky organic ligands into the cluster framew…     

Calix[4]bis(thiacrown): assembly of an endocyclic disilver(I) complex and exocyclic 3D copper(I) coordination polymers

Calix[4]bis(thiacrown-5) (L) with 1,3-alternating conformation was employed as a strong dinucleating ligand for the soft metal ions AgI and CuI. The reaction of L with AgPF6 afforded a discrete endo-coordinated disilver(I) complex 1, [Ag2L](PF6)2. In contrast, mixed products (2a + 2b) consisting of 3D networks were obtained from the reaction of L and CuI; 2b linked with a Cu4I4 cubane unit was shown to generate photoluminescence, while 2a linked with a Cu2I2 rhomboid unit does not.     

A tris(pyrazolyl) eta6-arene ligand that selects Cu(I) over Cu(II)

1,3,5-Tris{2'-[(pyrazol-1-yl)methyl]phenyl}benzene, 4, and its complexes with Cu(I) and Ag(I) have been prepared and characterized. Both CuI4 and AgI4 triflate crystallize in the rhombohedral space group R3, with the cations and anions each exhibiting crystallographically imposed 3-fold (C3) symmetry. In both complexes, 4 behaves as a tris(pyrazolyl) eta6-arene ligand whose arms act as three-pronged tweezers to form chiral, propeller-like cations with pyramidal MN(pyrazole)3 coordination geometries. Centers of symmetry in the space group ensure that the crystals are racemates, with equal numbers of P,P,P and M,M,M enantiomers. In broad outline, each cation is shaped like a three-legged stool, with the metal ion centered at the top and pointed downward from a triangular N(pyrazole) plane toward the center of gravity (Cg) of the central benzene ring (a metal-endo conformation), which constitutes the bottom shelf of the stool. The Cu(I)...Cg and Ag(I)...Cg distances, 3.195(2) and 3.165(2) A, respectively, support the existence of an eta6 bonding interaction with Ag(I) and, to a lesser extent, with Cu(I). NMR data for AgI4 suggest rapid interconversion of this cation in solution between P,P,P and M,M,M enantiomers. Our inability to prepare any Cu(II) complexes with 4 is consistent with cyclovoltammetric results, which suggest that the ligand is more easily oxidized than Cu(I).     

From discrete [Y(DMF)8][Cu4(mu3-I)2(mu-I)3I2] ion pairs to extended [Y(DMF)6(H2O)2][Cu7(mu4-I)3(mu3-I)2(mu-I)4(I)]1infinity and [Y(DMF)6(H2O)3][Cu(I)7Cu(II)2(mu3-I)8(mu-I)6]2infinity arrays by H-bond templating in a confined solvent-free environment

An ionic heterometallic species [Y(DMF)(8)][Cu(4)(micro(3)-I)(2)(micro-I)(3)I(2)](1) was isolated from a solution of CuI, NH(4)I and YI(3)(Pr(i)OH)(4) in DMF-isopropoxyethanol, and was converted in a confined environment by progressive substitution of the DMF ligands with water molecules first into a 1D zig-zag structure [Y(DMF)(6)(H(2)O)(2)][Cu(7)(micro(4)-I)(3)(micro(3)-I)(2)(micro-I)(4)(I)](1infinity)(2) and finally into a 2D sheet [Y(DMF)(6)(H(2)O)(3)][Cu(I)(7)Cu(II)(2)(micro(3)-I)(8)(micro-I)(6)](2infinity)(3) by H-bond templating.     

Control of copper(I) iodide architectures by ligand design: angular versus linear bridging ligands

A family of coordination polymers formed by the reaction of copper(I) iodide with a range of angular bidentate or tridentate N-donor ligands is reported. The framework polymers [CuI(dpt)](infinity) 1 [dpt = 2,4-bis(4-pyridyl)-1,3,5-triazine], [CuI(dpb)](infinity) 2 [dpb = 1,4-bis-(4-pyridyl)-benzene], [(CuI)3(dpypy)2](infinity) 3, [CuI(dpypy)](infinity) 4 [dpypy = 3,5-bis(4-pyridyl)-pyridine], and [Cu3I3(pypm)](infinity) 5 [pypm = 5-(4-pyridyl)pyrimidine] have been prepared and structurally characterized. It was found that the angular nature of the dpypy and dpt ligands favors the formation of discrete (CuI)2 dimeric subunits as observed in [CuI(dpt).MeCN](infinity) 1 and [(CuI)3(dpypy)2](infinity) 3. In contrast, reaction with the linear ligand dpb affords [CuI(dpb)](infinity) 2 which incorporates a one-dimensional (CuI)(infinity) chain structure. Moreover, the additional donor available on the central ring of the dpypy ligand generates a novel two-dimensional bilayer structure in 3, in contrast to the one-dimensional ribbon structure observed in the case of 1. Interestingly, the bilayer structure of 3 additionally exhibits 2-fold interpenetration. The reaction of CuI with dpypy produces not only 3 but a further product [CuI(dpypy)](infinity) 4 that has been characterized as a one-dimensional chain constructed from trigonal-planar Cu(I) centers bridged by bidentate dpypy ligands. Compound 5, [Cu3I3(pypm)](infinity), exhibits a highly unusual three-dimensional structure in which the pypm ligand bridges two-dimensional brick-wall (CuI)(infinity) sheets.     

Synthesis and crystal structure of chain [Cu_2I_2(PPh_3)_2(C_4H_5N_3)]∝

The chain [ Cu2I2(PPh3)2(C4H5N3)] has been synthesized and characterized by X-ray crystallography.It crystallizes in the triclinic system,space group P 1,with a=0.9985(2)nm,b=1.0998(2)nm,c=1.5174(2)nm,a=87.89(1),P=76.73(l),7=77.77(1),V=1.5849(5)nm3,Z=2,Bc=2.095g/cm3 [Gu2I2(PPh3)2(Crh5N3)] has a dimmer unit [Cu2I2(PPh3)2(C4H5N3)].The two N atoms of the phenyl ring of 2-aminopyrimidine bridge two [CuI(PPh3)]2 units,by which a one-dimensional chain is constructed.The van der Waals force makes the molecules arrange in the three-dimensional space.     

Tetraphosphinitoresorcinarene complexes: cationic silver(I) and copper(I) halide complexes as mercurate(II) anion receptors

The reactions of mercury(II) halides with the tetraphosphinitoresorcinarene complexes [P4M5X5], where M=Cu or Ag, X=Cl, Br, or I, and P4=(PhCH2CH2CHC6H2)4(O2CR)4(OPPh2)4 with R=C6H11, 4-C6H4Me, C4H3S, OCH2CCH, or OCH2Ph, have been studied. The reactions of the complexes with HgX2 when M=Ag and X=Cl or Br occur with elimination of silver(I) halide and formation of [P4Ag2X(HgX3)], but when M=Ag and X=I, the complexes [P4Ag4I5(HgI)] are formed. When M=Cu and X=I, the products were the remarkable capsule complexes [(P4Cu2I)2(Hg2X6)]. When M=Ag and X=I, the reaction with both CuI and HgI2 gave the complexes [P4Cu2I(Hg2I5)]. Many of these complexes are structurally characterized as containing mercurate anions weakly bonded to cationic tetraphosphinitoresorcinarene complexes of copper(I) or silver(I) in an unusual form of host-guest interaction. In contrast, the complex [P4Ag4I5(HgI)] is considered to be derived from an anionic silver cluster with an iodomercury(II) cation. Fluxionality of the complexes in solution is interpreted in terms of easy, reversible making and breaking of secondary bonds between the copper(I) or silver(I) cations and the mercurate anions.     

Cu(I) or Cu(I)-Cu(II) mixed-valence complexes of 2,4,6-Tri(2-pyridyl)-1,3,5-triazine: syntheses, structures, and theoretical study of the hydrolytic reaction mechanism

The reactions of 2,4,6-tri(2-pyridyl)-1,3,5-triazine (tpt) with copper(I) halides under solvothermal or traditional conditions yielded two polymeric Cu(I) complexes [Cu2I2(tpt)]n (1) and [Cu3I3(tpt)]n (2), one mixed-valence Cu(I)-Cu(II) complex [Cu4Cl2I4(tpt)2] (3), and two Cu(II) complexes [CuBr(bpca)] (4) and [CuI(bpca)] (5) (bpca = bis(2-pyridylcarbonyl)amine). Complex 1 is a zigzag chain with tpt in a bis-bipyridine-like coordination mode, whereas complex 2 with tpt chelating three Cu(I) cations is a ladderlike coordination polymer. Complex 3 is mixed-valence, with Cu(I) in a distorted tetrahedral geometry and Cu(II) in a distorted square pyramidal geometry, forming a ladderlike supramolecular chain. Complexes 4 and 5 are the products of in situ hydrolysis of tpt involving the oxidation of Cu(I). The synthesis and characterization of complex 1, 2, and 5 indicated that Cu(I) cannot promote the hydrolysis of tpt. The theoretical study shows that the main effect for hydrolysis of tpt is the electron-withdrawing effect of metal ions.     

Copper(I) complexes of bis(2-(diphenylphosphino)phenyl) ether: synthesis, reactivity, and theoretical calculations

The tricoordinated cationic Cu(I) complex [Cu(kappa2-P,P'-DPEphos)(kappa1-P-DPEphos)][BF4] (1) (DPEphos = bis(2-(diphenylphosphino)phenyl) ether) containing a dangling phosphorus center was synthesized from the reaction of [Cu(CH3CN)4][BF4] with DPEphos in a 1:2 molar ratio in dichloromethane. When complex 1 is treated with MnO2, elemental sulfur, or selenium, the uncoordinated phosphorus atom undergoes oxidation to form a P=E bond resulting in the formation of complexes of the type [Cu(kappa2-P,P'-DPEphos)(kappa2-P,E-DPEphos-E)][BF4] (2, E = O; 3, E = S; 4, E = Se) containing a Cu-E bond. The zigzag polymeric CuI complex [Cu(kappa2-P,P'-DPEphos)(micro-4,4'-bpy)]n[BF4]n (5) was prepared by the reaction of [Cu(CH3CN)4][BF4] with DPEphos and 4,4'-bipyridine in an equimolar ratio. The stereochemical influences of DPEphos on its coordination behavior are examined by density functional theory calculations.     

Construction of new heteroselenometallic clusters: formation of crownlike [Et4N]4[(mu5-WSe4)(CuI)5(mu-I)2] and octahedral polymeric [(mu6-WSe4)Cu6I4(py)4]n from planar [Et4N]4[(mu4-WSe4)Cu4I6] with additional faces

The coplanar cluster compound [Et4N]4[(mu4-WSe4)Cu4I6] (1) was prepared from reaction of [Et4N]2[WSe4] with 4 equiv of CuI in N,N-dimethylformamide (DMF) solution in the presence of [Et(4)N]I. Treatment of 1 with pyridine (py) in dry MeCN gave the neutral cluster [(mu4-WSe4)Cu4(py)6I2] (2) in good yield. Recrystallization of 1 from py/i-PrOH resulted in the reorganization of the coplanar WSe4Cu4 core and the formation of a neutral polymeric cluster [(mu3-WOSe3)Cu3(py)3(mu-I)]n (3) containing a nest-shaped OWSe3Cu3 core and a terminal W=O bond. The interaction of cluster 1 with excess PPh3 in CH3Cl3 gave [(mu3-WSe4)Cu3(PPh3)3(mu3-I)] (4) which has a cubanelike SeWSe3Cu3I core. Treatment of 1 with 1 equiv of CuI in dimethyl sulfoxide (DMSO) yielded [Et4N]4[(mu5-WSe4)(CuI)5(mu-I)2] (5) which has a crown-like core structure. Treatment of 1 in DMF with 2 equiv of CuI in the presence of py resulted in the formation of a two-dimensional polymeric cluster, [(mu6-WSe4)Cu6I4(py)4]n (6), consisting of an octahedral WSe4Cu6 repeating unit. The solid-state structures of clusters 3, 5, and 6 have been further established by X-ray crystallography. The nonlinear optical properties of 6 have been also investigated. Cluster 6 was found to exhibit good photostability and a large optical limiting effect with the limiting threshold being ca. 0.3 J cm(-2).     

新颖的[CuI(dpq)2]+配合物阳离子修饰的砷钒酸盐[Cu(dpq)2]4[As8V14O42(H2O)]·2H2O的水热合成与结构表征

采用水热方法制备了一个新颖的[CuI(dpq)2]+配合物阳离子修饰的砷钒酸盐[Cu(dpq)2]4[As8V14O42(H2O)]·2H2O, X射线单晶衍射结果表明, 该化合物的结构是由4个[CuI(dpq)2]+阳离子和1个[As8V14O42(H2O)]4-簇阴离子以及2个结晶水组成的, 簇阴离子内部包含一个孤立的水分子.     

Dimorphism of a new CuI coordination polymer:synthesis,crystal structures and properties of catena[CuI(2-iodopyrazine-N)] and poly[CuI(mu2-2-iodopyrazine-N,N')

Two modifications of the new copper(I) iodide coordination polymer CuI(2-iodopyrazine) were obtained by the reaction of CuI and 2-iodopyrazine in acetonitrile. During this reaction, intensely yellow crystals of form I appear first which transform within several minutes to intensely red crystals of form II which is the thermodynamically most stable form at room temperature. In catena[CuI(2-iodopyrazine-N)] (form I; a = 4.1830 (6) A; b = 10.814 (1) A; c = 17.961 (4) A; V = 812.5 (2) A(3); orthorhombic; P2(1)2(1)2(1); Z = 4), corrugated CuI double chains are found in which each copper atom is coordinated by one additional 2-iodopyrazine ligand. In poly[CuI(mu-2-iodopyrazine-N,N')] (form II; a = 4.2679 (5) A; b = 13.942 (2) A; c = 13.017 (2) A; b = 92.64 (1) degrees; V = 773.76 (2) A(3); monoclinic; P2(1)/c; Z = 4), CuI single chains occur which are connected via mu-N,N' coordination by the 2-iodopyrazine ligands to layers parallel to (010). The thermal behavior of both forms was investigated using simultaneous differential thermoanalysis, thermogravimetry, and mass spectrometry as well as differential scanning calorimetry and temperature resolved X-ray powder diffraction. On heating, both forms decompose to copper(I) iodide, and the decomposition temperature of form I is significantly lower than that of form II. From all experiments, there is no indication of a phase transition of one form into the other or for the formation of a phase with lower amine content.