纳米Fe3O4分离富集-悬浮进样-氢化物发生原子荧光法测定砷形态

研究了以纳米Fe3O4为固相吸附剂对痕量无机砷形态的吸附与分离富集,建立了无需洗脱分离的悬浮进样-氢化物发生-原子荧光法测定砷形态的方法。选择的反应体系为0.64 g/L Fe3O4悬浮液-1.0%(m/V)NaBH4溶液-5.0%(V/V)HCl(pH 8),进样5.0 mL时,得到本方法的检出限为13.5 ng/L;As(Ⅲ)浓度在0.05～3.5μg/L范围内呈良好的线性关系;测定0.5μg/L As(Ⅲ)的精密度RSD=3.4%。用国家标准物质GBW10010(大米)验证了本方法测定砷的准确性,测定结果(0.101±0.010μg/g)与标准值(0.102±0.008μg/g)吻合。采用本方法测定了近海海水和雪水样品中的无机砷形态,并进行了加标回收实验。对As(Ⅲ)和As(Ⅴ)的加标回收率在95%～110%之间,结果令人满意。     

磁固相萃取技术应用于主流烟气中烟草特有N-亚硝胺的测定

合成了甲基丙烯酸改性的Fe3O4磁性纳米颗粒(Fe3O4@Si O2@MAA),建立了磁固相萃取技术与高效液相色谱-串联质谱联用检测主流烟气中烟草特有N-亚硝胺(TSNAs)的方法。该方法通过加入磁性纳米颗粒对萃取液中TSNAs进行富集,洗脱液在HPLC-MS/MS多反应监测模式下进行检测,可满足低焦油和新型烟草制品等低含量TSNAs的检测要求。结果表明:Fe3O4@Si O2@MAA纳米颗粒粒径均一,分散性好,具有超顺磁性,其表面的羧基可吸附溶液中的TSNAs,实现分离富集;该前处理方法操作快速简便,适用于大批量样品分析;4种烟草特有N-亚硝胺的定量下限为0.10~0.48μg/L,加标回收率为88.3%~112.8%,该方法满足复杂烟气背景下痕量TSNAs的检测要求。     

新型磁性纳米金修饰过氧化氢生物传感器的研制

利用共沉淀法合成纳米Fe3O4颗粒,将半胱氨酸吸附到纳米Fe3O4微粒表面,借助半胱氨酸的巯基(-SH)对纳米金的强烈吸附,使纳米金自组装到磁性颗粒上,再通过静电吸附作用自组装辣根过氧化酶(HRP),合成了Fe3O4/Cys/Au/HRP纳米复合粒子,最后通过磁力将其修饰到固体石蜡碳糊电极表面,制得新型过氧化氢生物传感器.以对苯二酚作为电子媒介,用计时电流法对H2O2进行测定,线性范围为2.4 X10-3～6.0×10-6mol/L,检出限(S/N=3)为2.5 X 10-6mol/L,响应时间小于10 s.磁性纳米微粒Fe3O4/Cys/Au能够高效地保持HRP的生物活性.该新型传感器已用于实际样品测定.     

磁性石墨烯固相萃取/原子吸收法测定环境水样中的痕量铜

以1-(2-吡咯偶氮)-2-萘酚(PAN)为络合剂络合水样中的痕量铜,以磁性石墨烯(G)纳米材料为固相萃取吸附剂,建立了测定水样中痕量铜的磁性固相萃取/火焰原子吸收分光光度法。此方法将磁性石墨烯比表面积大、吸附性能好的优点与Fe3O4纳米粒子的磁性相结合,采用的磁性固相萃取避免了传统固相萃取中离心和过滤等繁琐的操作步骤。对影响G-Fe3O4萃取效率的实验因素进行了优化。在优化实验条件下,对铜离子的富集倍数为80.4倍,线性范围为0.5～100μg/L,相关系数(r)为0.998 1,检出限为0.067μg/L,相对标准偏差为2.1%～5.2%。此方法成功地应用于矿泉水、自来水、公园湖水中铜离子含量的测定,其加标回收率为94%～103%。结果表明,该磁性石墨烯纳米材料G-Fe3O4对水样品中铜的PAN络合物具有较高的富集能力。     

纳米B2O3/TiO2复合材料的制备及其对痕量银的分离富集性能研究与应用

制备了新型纳米B2O3/TiO2吸附材料,并采用扫描电镜(SEM)及红外光谱(IR)对其进行表征,优化了纳米B2O3/TiO2复合材料对试液中痕量银的吸附和解吸条件,建立了纳米B2O3/TiO2分离富集-原子吸收光谱测定痕量银的新方法。当pH 4.3时,在22℃下振荡20 min,Ag+能被该材料快速吸附,其静态饱和吸附容量为11.72 mg/g,吸附在纳米B2O3/TiO2上的Ag+可用0.1 mol/L HNO3-0.05 mol/L硫脲(1∶4)完全洗脱。该方法的检出限为2.01μg/L,线性范围为0.01～4.00 mg/L,相对标准偏差(RSD)为1.8%,加标回收率为95%～105%。方法应用于实际矿渣样品中痕量银的测定,结果满意。     

Fe304@C/Pt复合纳米粒子的原位合成及其催化性质的研究

采用水热方法分别合成了Fe304磁性内核以及Fe3O4@C粒子.并原位合成了Fe3O4@C/Pt复合纳米结构,采用SEM,TEM红外光谱,Raman光谱等手段进行了相关表征.研究了纯Pt纳米粒子以及Fe3O4@C/Pt复合纳米结构催化硼氢化钠(NaBH4)还原对硝基苯酚(4-NP)的反应活性,并利用外加磁场富集的方式对...     

真空蒸馏预富集-电感耦合等离子体发射光谱法测定铂

建立了真空蒸馏预富集-电感耦合等离子体发射光谱法测定铅试样中微量铂的方法.在真空条件下,利用Pb和Pt在较高温度下蒸汽压的差别进行分离,富集后的铂溶解制成溶液后进行电感耦合等离子体发射光谱检测,实现了真空密闭回收铅.针对试样的特点,对真空蒸馏方法理论上的可行性进行研究.结果表明:在蒸馏温度为1250 K,真空度为30 Pa,蒸馏时间为3 h条件下,铂的富集分离效果最好,可富集至99.01%以上.线性范围为0.023～20 mg/L,检出限(3σ)为0.0069 mg/L,对样品测定的相对标准偏差为1.7%(n=6).用本方法对样品中加入的铂标准溶液进行了测定,回收率为99.8%～103.0%.本方法简便快速、无污染,已应用于废电路板贵金属冶余物料中铂的测定.     

新型Fe3O4纳米颗粒修饰玻碳电极对头孢噻肟钠的电催化还原及其测定

采用滴涂法将Fe3O4磁性纳米颗粒修饰在玻碳电极上,制得新型纳米Fe3O4修饰电极(Fe3O4-np/GC 电极).X射线衍射光谱表明,纳米Fe3O4为面心立方尖晶石结构,透射电子显微镜表明,纳米Fe3O4粒径15～20 nm的微球结构.采用扫描电子显微镜和交流阻抗法(EIS)对修饰电极表面进行了表征,发现纳米Fe3O4在电极表面形成了均匀的修饰膜.采用循环伏安法(CV)、微分脉冲伏安法(DPV)研究了头孢噻肟钠(CS)在修饰电极上的电化学行为及动力学性质,结果表明,CS在Fe3O4-np/GC电极上有敏锐的催化还原峰,且CS的还原峰电流与其浓度在7.0×10-8～1 ×10-6和1 ×10-6～4.5×10-5 mol/L范围内呈线性关系;检出限达到5.0×10-8 mol/L.该方法可用于市售头孢噻肟钠针剂中CS含量的测定,加标回收率达到96.6％～102.7％.     

磁性纳米粒子富集-电感耦合等离子体发射光谱法测定食具中铬、镍、镉、铅、砷的迁移量

采用氩电弧等离子体法制备磁性碳包铁纳米粒子,考察了其对水溶液中Cr,Ni,Cd,Pb和As的富集能力,建立电感耦合等离子体原子发射光谱同时测定食具中Cr,Ni,Cd,Pb和As迁移量的分析方法。研究了纳米粒子表面经H2O2处理后,pH值、吸附时间、吸附剂用量等因素对各元素富集效率的影响。结果表明,H2O2表面处理可有效提高纳米粒子对待检元素的吸附率。在pH 8.0～9.5范围内,选用30 mg碳包铁纳米粒子定量富集,振荡3 min后,Cr,Ni,Cd,Pb和As均可被磁性碳包铁纳米粒子定量富集,酸性溶液(pH 1～2)可洗脱吸附离子。采用本方法测定了实际样品,各元素回收率在87%～106%之间。     

毛细管电泳紫外吸收法分离检测海洋生物样品中不同形态的砷化合物

本研究建立了对亚砷酸盐As(Ⅲ)、二甲基砷(DMA)、对甲基苯砷酸(p-As)、一甲基砷(MMA)、砷酸盐(As(Ⅴ)) 5种不同形态的砷化合物的毛细管区带电泳(CZE)分离紫外检测方法,研究了检测波长、缓冲体系种类、pH值及其浓度、分离电压、温度、进样时间等因素对5种形态砷化合物的分离度、灵敏度、重现性等的影响.结果表明,在25 ℃、195 nm、20 mmol/L NaH2PO4-5 mmol/L Na2B4O7(pH=6.25)缓冲溶液、20 kV运行电压、3.0 kPa压力进样10 s条件下,5种不同形态砷化合物在11 min内取得完全分离,5种不同形态砷化合物的迁移时间和峰面积的RSD为0.50%～1.51%和1.65%～3.36%,检出限(3S/N)为0.004～0.30 mg/L.本法成功地应用于虾米中不同砷形态含量的测定,其回收率在93%～106%之间.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.