Paraxial-domain diffractive elements with 100% efficiency based on polarization gratings

The concept of polarization freedom is employed to design diffraction gratings that are capable of transforming an electromagnetic plane wave into two or three diffraction orders with an arbitrary efficiency distribution among them, such that the combined efficiency of the signal orders is always equal to 100%. As a special case we consider paraxial-domain duplicators and triplicators with 100% efficiency, which is not possible for illumination by scalar waves: Diffractive elements that are capable of performing the required wave transformation must modulate the state of polarization of the incident field.     

High-efficiency, high-dispersion diffraction gratings based on total internal reflection

We report a new class of high-dispersion immersed diffraction gratings for which the reflective nature of the diffraction is provided by the phenomenon of total internal reflection (TIR) regardless of grating tooth shape. Thus, the component can be fabricated from a single dielectric material and requires no metallic or dielectric film layers for high reflection diffraction efficiency. With the absence of metallic absorption, diffraction efficiencies of these TIR gratings can reach more than 99% for 15-20-nm spectral bandwidths, making them suitable for many laser-based technologies.     

High-efficiency fused-silica transmission gratings

We describe the design, fabrication, and performance of high-efficiency transmission gratings fabricated in bulk fused silica for use in high-power ultraviolet laser systems. The gratings exhibit a diffraction efficiency of 94% in order m=-1 and a damage threshold greater than 13>J/cm( 2) for 3-ns pulses at 351 nm. Model calculations and experimental measurements are in good agreement.     

基于超材料的中波红外宽带偏振转换研究

基于硅纳米块阵列和亚波长金属光栅,硅纳米块长轴与金属光栅夹角为45°,本文设计了一种高效、宽带偏振转换结构.模拟计算表明该结构实现了线偏振光90°旋转,在3.4—4.5μm波段偏振转换率大于60%,在3—5μm光谱范围内的转换对比率大于10~4.由于该结构光学性能优异,制备难度低,可以应用于光传输控制.     

Near-field diffractive elements

A novel near-field imaging system is proposed and simulated. It is seen that a significant improvement in performance in the presence of noise is possible without loss of resolution.     

基于开口椭圆环的高效超宽带极化旋转超表面

电磁波的极化态在信号传输和灵敏度测量中有非常重要的应用价值. 本文设计、仿真并实验验证了微波频段基于开口椭圆环谐振器的极化旋转超表面. 理论上, 将多阶表面等离子谐振和高阻抗表面相结合, 解释了多谐振点、高效率极化旋转的物理机理. 数值上, 通过对结构参数的仿真分析, 给出了运用开口椭圆环结构设计多频段、超宽带高效极化旋转超表面的方法. 所设计和制作的超表面能够在相对带宽104.5%的频率范围内实现大于85%的极化旋转效率. 这些工作将为极化操控超表面的设计和应用提供重要帮助.     

Flexible broadband polarization converter based on metasurface at microwave band

A flexible broadband linear polarization converter is proposed based on the metasurface operating at microwave band.To achieve bandwidth extension property, long and short metallic arc wires, as well as the metallic disks placed over a ground plane, are combined into the polarizer, which can generate three neighboring resonances.Due to the combination of the first two resonances and the optimized size and thickness of the unit cell, the polarization converter can have a weak incident angle dependence.Both simulated and measured results confirm that the average polarization conversion ratio is over 85% from 11.3 GHz to 20.2 GHz within a broad range of incident angle from 0°to 45°.Moreover, the proposed polarization converter based on flexible substrates can be applied for conformal design.The simulation and experiment results demonstrate that our designed polarizer still keeps high polarization conversion efficiency, even when it adheres to convex cylindrical surfaces.The periodic metallic structure of the designed polarizer has great potential application values in the microwave, terahertz, and optic regimes.     

Beam switching with binary single-order diffractive gratings

A new type of a micro-optomechanical dielectric switch in free-space configuration for visible light is proposed and experimentally demonstrated. The combination of scalar and rigorous diffraction analysis of Gaussian beams predicts high high switching efficiency with a single/noise ratio of better than 40 dB.     

High-efficiency broadband fiber-optic mechanical intermodal converter

We demonstrate a highly efficient, broadband fiber-optic intermodal converter. The technique relies on a long period grating mechanically induced in a two-mode fiber. A compact, portable apparatus was designed and fabricated, where period-variable metallic corrugation is implemented to form periodic micro-bends along the fiber. The coupling strength between the interacting fiber modes and the grating period can be tuned continuously and individually using two control knobs in the apparatus. Experimental results show that the complete coupling between the LP₀₁ and LP₁₁ modes is achieved, which is confirmed by an observed over-coupling while increasing the grating strength. For the short fiber length of <1.9 cm (33 grating periods), large band-rejection of −32.5 dB was obtained at resonance. The band rejection efficiency over 98.6% have been achieved in the entire communication C-band. As the grating strength increased, two over-couplings were observed at resonance, which indicates the high efficiency of the device. Experimental results are confirmed by our numerical simulations.     

Ultrashort broadband polarization beam splitter based on an asymmetrical directional coupler

An ultrashort polarization beam splitter (PBS) based on an asymmetrical directional coupler is proposed by utilizing the evanescent coupling between a strip-nanowire and a nanoslot waveguide. In order to be convenient for integration with other components, mode converters between the nanoslot waveguide and the strip-nanowire are introduced and merged into S-bends to achieve an ultracompact PBS. As an example a 6.9 μm long PBS based on a silicon-on-insulator platform is designed, and the length of the coupling region is as small as 1.3 μm. Numerical simulations show that the present PBS has a very broad band (>160 nm) for an extinction ratio of >10 dB.     

基于谐振环的太赫兹宽带偏振转换器件研究

提出了一个基于谐振环结构的宽带且高效的太赫兹线偏振转换器.该结构由金属-电介质-金属三层构成,位于顶层的是基于开口谐振环的超表面,中间为介质层,底部为金属板.实验结果表明,该结构可以在0.59-1.24 THz频率范围内将线偏振的太赫兹波偏振方向旋转90°,转换率超过80%.通过计算该结构在所研究的频率范围内反射光的偏振角和椭圆角,证实了该结构可以在较宽的频率范围内实现高效的线偏振转换.对该结构在偏振转换率高的频率下表面电流和电场进行仿真,分析了高偏振转换率和宽带的机理.同时,研究了该结构的偏振转换率对入射角以及偏振角的依赖性,结果表明该结构在0°-30°入射角范围内、-10°-10°偏振角范围内均有很好的偏振转换性能.     

基于严格耦合波理论的宽光谱金属介质膜光栅衍射特性分析

基于严格耦合波理论建立了金属介质膜光栅的衍射机理模型,给出了TE模式金属介质膜光栅衍射效率的表达式.以-1级衍射效率和工作带宽为评价函数,对金属介质膜光栅的表面浮雕结构进行了优化设计.对于800 nm和1053 nm为中心的TE波,设计的金属介质膜光栅-1级衍射效率优于97%的工作带宽分别达到130 nm和150 nm,最后讨论了设计的宽光谱高衍射效率金属介质膜光栅的制备工艺容差.此研究对于提高脉宽压缩光栅的性能具有重要的意义. 关键词： 衍射效率 金属介质膜光栅 严格耦合波理论     

Phase diffractive optical gratings on glass substrates by laser ablation

A novel and rapid laser ablation method for the fabrication of phase diffractive gratings in low-cost glass substrates is presented. The structures are characterized in terms of their shape and physical parameters by confocal microscopy and SEM microscopy. The first-order diffraction efficiency at normal incidence under 632.8 nm wavelength is shown. The influence of the overlap factor on the period grating is studied.     

Design of an all-optical logic sequence generator based on polarization holographic gratings

In this Letter, an all-optical logic sequence generator based on two different polarization holographic gratings has been proposed and demonstrated, which has one input port and four output ports. The polarization state of input light signal determines logic output signals. It can produce four kinds of logic sequence output signals:1000, 0100, 0010, and 0001, corresponding to the input light signal of four different polarization states: the p-linear, s-linear, left-handed circular, and right-handed circular. The two polarization gratings have been fabricated, and the working principle of the logic sequence generator has been proved by diffraction pattern analysis of polarization gratings.     

Tunable broadband isolator based on electro-optically induced linear gratings in a nonlinear photonic crystal

We theoretically propose a broadband optical isolator based on second-harmonic generation in a one-dimensional quadratic nonlinear photonic crystal (NPC) with an embedded defect. An external electric field along the z axis is applied to modulate the NPC refractive index periodically. Complete optical isolation always could be reached with the help of an external field. Influences of the defect position and thickness are discussed. The spectral and power tolerances of the isolator also have been investigated and show high contrast within a wide wavelength range at different power levels.     

一种基于超材料的宽带、反射型90°极化旋转体设计

根据各向异性媒质理论, 设计了一种宽带、反射型超材料极化旋转体, 能够将线极化波极化方向旋转90°, 极化转化率大于90%的工作带宽为5.5–14.5 GHz. 该极化旋转体由两层介质板、金属双开口谐振环和金属底板周期排列构成, 具有各向异性的特点, 单元两对角线方向的电场分量反射系数相同, 反射相位相差180°, 导致其极化旋转特性. 利用表面电流分布图, 分析不同极化波入射时该极化旋转体的谐振状态, 实验和仿真结果符合较好. 该极化旋转体在新型天线设计和隐身技术等方面具有广阔的应用前景.     

基于超表面材料的扇出衍射光学元件

提出一种基于电介质纳米砖阵列的扇出衍射光学元件的设计和实现方案,其纳米砖的深宽比低至1.5。这种扇出衍射光学元件被一束波长为633 nm的入射光束照射时,可以在远场中得到均匀的4×4点阵,发散角为32°×32°,且数值模拟与实验结果吻合良好。基于超表面材料的扇出衍射光学元件具有连续、精确的相位操纵能力和较高的偏振转换效率,并且仅需一步光刻制造工艺,可以广泛应用于工程光学的各种领域,例如光学传感,激光雷达,激光加工等。     

Far field of polarization gratings

In a recent Letter [Opt. Lett. 24, 584 (1999)], Gori analyzed polarization gratings and proposed using them as a tool to measure Stokes parameters. Most of his analysis dealt with the near field, but practical exploitation of his approach relies on the far field. A discussion focusing on the far field is presented, and recipes are suggested for actual implementations of such devices.     

Reflection gratings as polarization converters

An experimental and theoretical modelling study of corrugated gold surfaces, where the refractive index of the upper medium is varied to change the effective wavelength of the incident radiation, is presented. For certain corrugation amplitudes we show that it is possible to convert nearly 100% of plane polarized light incident normal to the average plane of the grating surface into the orthogonal polarization. Investigations of the incident radiation's E-fields immediately above the corrugated surface show that the physical origin of this phenomenon rests with the phase retardation introduced by reflection. It is found that optimum polarization conversion occurs when the component of the optical E-field parallel to the grating wavevector is retarded by 180° with respect to the component parallel to the grooves.     

Passive broadband silicon-on-insulator polarization splitter

We present the implementation of a novel wavelength independent polarization splitter on a silicon-on-insulator platform. The waveguide splitter is based on a zero-order arrayed waveguide grating (AWG) configuration. The splitting function is realized by employing cladding stress-induced birefringence. The device demonstrated a TE to TM splitting ratio better than -15 dB over a 20 nm tuning range centered around lambda=1550 nm and better than -10 dB over our entire accessible wavelength range from lambda=1465 nm to 1580 nm. The highest splitting extinction ratio achieved was -20 dB. To our knowledge, this is the first reported passive broadband polarization splitter based on AWG.