Partition layer-modified substrates for reversible surface-enhanced Raman scattering detection of polycyclic aromatic hydrocarbons

Herein, we present progress towards an analytical sensor for polycyclic aromatic hydrocarbons (PAHs) using surface-enhanced Raman scattering (SERS) on partition layer-modified nanostructured substrates. Specifically, a 1-decanethiol monolayer has been assembled on a silver film over nanospheres substrate to concentrate PAHs within the zone of SERS detection. Both anthracene and pyrene were detected with limits of detection at 300 and 700 pM, respectively. The measured SERS spectra allowed for easy distinction of the two PAH compounds, due to varying peak locations, and insight into the partitioning mechanism. Additionally, exposure to a common environmental interferant, Suwannee River fulvic acid, did not impede the measurement of the PAHs, and the sensor is reusable after a short exposure to 1-octanol. Finally, the utility of this sensing platform for PAH detection was compared to that achievable for other classes of organic pollutants such as polychlorinated biphenyls and polybrominated diphenyl ethers. Figure SERS detection of polycyclic aromatic hydrocarbons facilitated via partition layer modified substrates.

Core-shell effects of functionalized oxide nanoparticles inside long-range meso-ordered spray-dried silica spheres

Core-shell and homogeneous distributions of functionalized cerium oxide nanoparticles within spray-dried mesostructured silica spheres are achieved by modification of synthesis parameters such as the templating agent and nanoparticle capping functions. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.

Chemistry, commentary, and community: discussion of “an examination of the vaporization enthalpies and vapor pressures of pyrazine, pyrimidine, pyridazine, and 1,3,5-triazine” by Lipkind and Chickos

Vaporization enthalpies for the isomeric diazines were discussed within the context of recent measurements and estimation techniques. It is suggested that pyridazine shows enigmatic behavior.

The meaning of ‘concentration’

Terminology within a small laboratory community can be informal without danger of misunderstanding, but communication with a wider audience and not least in publications, needs unequivocal terms for defined concepts. As an example, the many meanings of “concentration” are explored to present a systematic nomenclature, including a concept diagram.

Encapsulating of single quantum dots into polymer particles

Single semiconductor quantum dots were embedded into polymer particles with diameters below 0.1 μm by an emulsion polymerization procedure or via a secondary dispersion approach. The photoluminescence properties of the nanocrystals are retained upon encapsulation, as demonstrated by fluorescence confocal microscopy.

Food anaphylaxis

    Figure Avoidance is the primary measure in food allergy confirmed

---

Kinetics of substitution at [tris(3,5-dimethylpyrazolyl)-hydroborato]molybdenum nitrosyl dihalides by alcohols and by aniline

The kinetics of substitution by alcohols and by aniline at [tris(3,5-dimethylpyrazolyl)hydroborato]molybdenum nitrosyl dihalides in toluene solution at 298.2 K and at atmospheric pressure are reported and interpreted in terms of an associative mechanism.

---

Protein microarrays for diagnostic assays

Protein microarray technology has enormous potential for in vitro diagnostics (IVD). Miniaturized parallelized immunoassays are perfectly suited to generating a maximum of diagnostically relevant information from minute amounts of sample whilst only requiring small amounts of reagent. Protein microarrays have become well-established research tools in basic and applied research and the first products are already on the market. This article reviews the current state of protein microarrays and discusses developments and future demands relating to protein arrays in their role as multiplexed immunoassays in the field of diagnostics.

Electrochemical quantification of reactive oxygen and nitrogen: challenges and opportunities

Reactive oxygen species (ROS) and reactive nitrogen species (RNS) play a crucial role in chemical signaling processes of biological cells. Electrochemistry is one of the rare methods able to directly detect these species. ROS and RNS can be monitored in the local microenvironment of cells in real time at the site where the actual signaling takes place. This review presents recent advances made with amperometric electrochemical techniques. Existing challenges for the quantification of ROS and RNS in biological systems are discussed to promote the development of innovative and reliable cell-based assays. Figure Reactive oxygen and nitrogen species (ROS & RNS) are produced biological cells. An amperometric sensor is placed in close proximity. The recorded current I is used to determine fluxes of certain species.

A novel Ce<Superscript>III</Superscript>-cyclam type complex and its redox chemistry in aqueous solutions

A new Ce^III complex was synthesized by mixing the ligand “dioxocyclam” with Ce^III ions at pH 8.0 and its redox properties were investigated.

Core-shell structured electrode materials for lithium ion batteries

Recent progress in studies of several types of core-shell structured electrode materials, including TiO₂/C, Si/C, Si/SiO _x , LiCoO₂/C, and LiFePO₄/C nanocomposites, including details of their preparation and their electrochemical performance is briefly reviewed. Results clearly show that the coating shell can effectively prevent the aggregation of the nanosized cores, which are the electrochemically active materials. In addition, the diffusion coefficients of lithium ions can be increased, and the reversibility of lithium intercalation and deintercalation is improved. As a result, the cycling behavior is greatly improved. The reviewed results suggest that core-shell nanocomposites are a good starting point for further development of new promising electrode materials.

---

Do we need to rethink collaborative trials?

The currently recommended design of collaborative trials (interlaboratory method performance studies) is examined in relation to the usefulness of the resulting statistics. It is suggested that larger experiments, without duplicate analysis, would be more informative.

A note on Michael Weisberg’s: challenges to the structural conception of chemical bonding

Michael Weisberg’s recent 2007 paper on the chemical bond makes the claim that the chemical notion of the covalent bond is in trouble. This note casts doubts on that claim.

Estimation of electrochemical quartz crystal microbalance frequencies from cyclic voltammetric data:—underpotential deposition of metals as an illustration

The estimation of electrochemical quartz crystal microbalance (EQCM) frequencies from a given cyclic voltammetric data is analysed using underpotential deposition (UPD) of metals as an illustrative process. The crucial role played by the surface roughness of electrodes and electrosorption valency of the depositing species is pointed out. The computed EQCM frequency shifts for the UPD of Cd and Tl on polycrystalline Ag electrodes are in satisfactory agreement with the experimental data.

Corrected Marcus plots

The advantages of corrected Marcus plots as compared to the more traditional corrected Tafel plots are discussed and illustrated by the treatment of experimental data. The procedures are proposed to avoid the uncertainties of EDL correction and to estimate the reliable values of transmission coefficient and total reorganization energy. Special emphasis is placed on the diagnostics of activationless reactions in frames of the same method. Dedicated to Professor M.A. Vorotyntsev on the occasion of his 60th birhtday.

---

The maximum potential a PEM fuel cell cathode experiences due to the formation of air/fuel boundary at the anode

In this short communication, a misconception about the maximum potential a polymer electrolyte membrane fuel cell (PEMFC) cathode experiences due to the formation of fuel/air boundary at the anode during startup/shutdown is clarified. It is shown, conceptually, that the maximum potential experienced by a cathode in PEMFC under such condition is about twice the potential observed when one connects a driving fuel cell to a driven cell (electrolyzer), both of which having the same physical characteristics and operating under the same conditions.

Preparation, structural, and optical features of two-dimensional cross-linked DNA/gold-nanoparticle conjugates

The formation and the optical features of two-dimensional aggregates formed by DNA-directed immobilization and cross-linking of bifunctional DNA–gold nanoparticles at flat gold substrates are analyzed. The samples are structurally characterized by atomic force microscopy to evaluate the particle size, the particle densities, and the degree of aggregation. The optical characteristics determined by UV/visible measurements are correlated with the structural features observed.

Chemistry,commentary and community: Discussion of “The NaDyBr<Subscript>4</Subscript> complex: its molecular structure and thermodynamic properties” by Varga and Hargittai

The molecular geometries, relative stabilities, binding energies, and dissociation energies of NaDyBr₄ and its molecular ion are discussed. Both the bidentate and tridentate isomers are stable for the neutral species, while only the bidentate form is stable for NaDyBr₄ ⁺.

Hermann Jahn and Rudolf Renner of the Jahn–Teller and Renner–Teller effects

Vibronic interactions have received increasing attention in modern structural chemistry. Edward Teller played a pioneering role in understanding and describing them during the “molecular physics” period of his scientific career. Very little is known about the two scientists who contributed significantly to our knowledge about these effects and whose names have become associated with Teller’s. This Editorial is devoted to Hermann Jahn and Rudolf Renner and attempts to lift them out of oblivion by paying them tribute for their contributions.

ISO 5725 and GUM: comparison and comments

We compare the approach to measure uncertainties proposed in ISO 5725 and GUM from a statistician point of view. In particular we give some warnings to the application of the expanded uncertainty introduced in GUM when the input variables are few and we report some considerations on the relevant role of the interactions among the input variables in the measurement equation as well as the role of statistical design of experiments to measure uncertainties.