电感耦合等离子体质谱(ICP-MS)法测定锆钛矿中的铪

锆钛矿组成成分复杂,存在耐高温的锆、钛化合物,不易分解,且铪以类质同象进入锆矿物,导致锆钛矿中的铪含量不均,因此完全分解锆钛矿并准确测定其中含量不同的铪成为一个难题。本文建立了碳酸钠-硼砂高温熔融,以178Hf为分析同位素及50 ng/mL185Re为内标,使用电感耦合等离子体质谱法（ICP-MS）测定锆钛矿中铪的新方法,可准确锆钛矿中含量不均的铪。实验研究了锆钛矿成分及其熔融方法,结果表明碳酸钠-硼砂高温熔融效果最好,可完全溶解耐高温难分解的锆钛矿,当碳酸钠-硼砂质量配比为2:1时熔融效果最佳。电感耦合等离子体质谱法具有检出限低、灵敏度高、线性范围宽等优势,可用于测定锆钛矿中含量不均的铪,ICP-MS蠕动泵转速为45 rpm、雾化流量为1.06 L/min时雾化效率最优。在选定的实验条件下,HfO2质谱强度与其质量浓度在0.01～250 ng/mL范围内呈良好的线性关系,相关系数为0.9997,背景等效浓度为0.029 ng/mL,方法检出限为0.0032 ng/mL。按实验方法对中国国家标准物质中的HfO2进行测定,测定值与认定值一致,相对标准偏差在1.6%~3.2%之间。按实验方法对锆钛矿样品中的HfO2进行测定并进行加标回收率实验,测定结果的相对标准偏差（RSDs,n=9）在0.9～3.4%之间,加标回收率在96%～106%之间,满足国家地质矿产行业标准DZ/T 0130—2006的要求。     

锆铪催化添加剂对PX液相氧化过程的影响

向对二甲苯(PX)催化氧化体系加入锆铪离子可有效地加速该反应过程．对锆铪离子与Co-Mn-Br催化剂体系的协同催化机理作了简要阐述，并对添加不同浓度下锆铪离子的催化作用进行了动力学实验．考察了添加锆和铪离子对主反应和燃烧副反应的影响，获得了锆铪离子添加剂对PX氧化过程的影响规律．研究发现，在实验所考察的温度与催化剂组成条件下，添加锆铪离子对反应过程中不同阶段的加速效果各不相同．且两种离子对燃烧副反应过程也有不同程度的加速作用．     

新试剂7-(2,4,6-三羟基苯偶氮)-8-羟基喹啉-5-磺酸光度法同时测定微量锆和铪

本文研究了新试剂7-(2,4,6-三羟基苯偶氮)-8-羟基喹啉-5-磺酸(THBAQS)与锆、铪的显色反应.酸性条件下锆、铪均可形成 M-THBAQS-CTMAB三元络合物,ε_(315nm)~(Zr)=3. 27×10~4,ε_(515nm)~(HI)=3.8×10~4,适量H_2O_2使锆络合物吸光度显著降低,据此实现了锆铪的同时测定.本法简便快速、适用范围为0～30μgZr/25 mL,0～25μg Hf/25 mL,且X_(Zr)+X_(Hf）<35μg/25 mL.     

ICP–AES测定铌铪合金中的铪、钛、锆、钨、钽

采用氢氟酸–硝酸溶解铌铪合金样品,建立电感耦合等离子体原子发射光谱法(ICP–AES)测定铌铪合金中铪、钛、锆、钨、钽元素的分析方法。铪、钛、锆、钨、钽的分析谱线分别为232.247,368.519,339.197,224.876,248.870nm,通过基体匹配法消除基体铌的干扰。在优化条件下对铌铪合金样品进行测定,各元素的质量浓度在其线性范围内与其光谱强度呈良好的线性关系,线性相关系数大于0.998,定量限为0.003 6%~0.007 4%。测定结果的相对标准偏差(n=11)小于1%,回收率为96.8%~105.0%。该方法快速、准确,可以满足实际生产中铌铪合金样品的测定要求。     

电感耦合等离子体原子发射光谱法测定核纯海绵锆中微量铪

应用标准加入-电感耦合等离子体原子发射光谱法(ICP-AES)对核纯海绵锆中微量铪进行测定.当试样中锆的质量浓度为10 g·L-1时,铪的测定范围为50～400μg·g-1,回收率为103%～110%,相对标准偏差(n=6)为4.2%～6.5%.     

分光光度法同时测定多元素的研究(Ⅱ)——以CPA-矩阵法计算混合体系中微量锆和铪

本文将m-NPF+CTMAB体系用于锆、铪混合物中微量锆、铪的同时测定。确定了同时测定锆,铪的最佳实验条件。通过使用CPA-矩阵法计算解决了混合体系中锆、铪分量的测定;对光度分析中应用CPA-矩阵法的关键——选择适宜的测定波长问题作了进一步讨论,提出了“相关波长”和“相关组份”的概念。     

表面活性剂对铪-栎精荧光反应的增敏作用及其在分析上的应用

黄酮类试剂已广泛应用于微量铪的荧光测定,等人已详细研究了在硫酸、盐酸介质中铪与桑色素及栎精的荧光反应,在0.2～0.5N硫酸中,铪与栎精生成络合物,灵敏度为0.04微克/毫升铪,而在5～7N盐酸中,也生成络合物,灵敏度为0.01微克/毫升铪;在7N盐酸中,铪与桑色素生成络合物,灵敏度为0.008微克/毫升铪,而在1N硫酸中也生成络合物,灵敏度为0.005微克/毫升铪。但是,由于锆铪性质极相似,在上述体系中,锆     

电感耦合等离子体原子发射光谱法测定锆铀合金中微量铪

应用电感耦合等离子体原子发射光谱法(ICP-AES),采用标准加入法对锆铀合金中微量铪进行了测定.当锆的共存量为8 g·L-1时,铪的测定范围是50～400 μg·g-1.在Zr-U合金的基础上分别加入铪50μg·g-1及400 μg·g-1作回收试验,测得回收率依次为106%及101%,相应的相对标准偏差为5.8%和3.7%.     

红外吸收法测定碳化铪粉末中的氧含量

应用氧氮分析仪建立碳化铪粉末中氧的测定方法。针对碳化铪熔点极高的特性,对加热功率、称样量和空白值等测定条件进行探讨,选择适合的助熔剂和高温石墨坩埚,确定了最佳测试条件。将该方法用于实际样品测定,测定结果的相对标准偏差小于2.0%(n=9),样品的加标回收率为98.1%～102.6%。     

二烷基次膦酸改性的SiO2基萃淋树脂的制备及吸附分离锆铪的性能

核级锆铪分离是限制我国核能发展的“卡脖子”难题,溶剂萃取法是应用最为广泛的锆铪分离工艺,但存在污染严重、分离效率低、易产生第三相等问题。萃取色层法分离相似金属离子效率高,优先吸附含量少的铪的萃淋树脂是萃取色层法分离锆铪的关键。本文以亲水性二氧化硅(SiO₂)为基底,合成了优先吸附铪的悬挂二烷基次膦酸官能团的新型萃淋树脂(SiO₂-POOH)。通过FT-IR和SEM-EDS对萃淋树脂SiO₂-POOH进行表征,通过静态吸附实验研究H₂SO₄体系下SiO₂-POOH对锆铪的吸附分离性能。结果表明：(1) H₂SO₄体系下,SiO₂-POOH优先吸附铪。在H₂SO₄浓度0.5～4mol·L^-1范围内,随着H₂SO₄浓度的增大,锆铪的吸附率均降低;(2)低酸度(0.5～1.0mol·L     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.