Asymmetric synthesis of metallocenes through enantioselective addition of organolithium reagents to 6-(dimethylamino)fulvene

Enantioselective addition of aryllithiums 2a-d (Ar = Ph (a), 2-MeC(6)H(4) (b), 2-MeOC(6)H(4) (c), 1-naphthyl (d)) to 6-(dimethylamino)fulvene (1) in the presence of (-)-sparteine in toluene at -78 degrees C generated chiral cyclopentadienyllithiums (4) substituted with an N,N-dimethylamino(aryl)methyl group, where the enantioselectivities are 51, 91, 90, and 83% for 4a, 4b, 4c, and 4d, respectively. Treatment of the chiral cyclopentadienides 4 with FeCl(2) or Fe(acac)(2) gave ferrocenes, which contain an N,N-dimethylamino(aryl)methyl side chain on both of the cyclopentadienyl rings. The enantiomeric purity of the chiral ferrocenes 7 thus obtained is 99% ee or higher for those containing a 2-MeC(6)H(4) (7b) or a 2-MeOC(6)H(4) (7c) group.     

Selective hydrogenation of benzophenones to benzhydrols. Asymmetric synthesis of unsymmetrical diarylmethanols

[reaction: see text] trans-RuCl2[P(C6H4-4-CH3)3]2(NH2CH2CH2NH2) acts as a highly effective precatalyst for the hydrogenation of a variety of benzophenone derivatives to benzhydrols that proceeds smoothly at 8 atm and 23-35 degrees C in 2-propanol containing t-C4H9OK with a substrate/catalyst ratio of 2000-20000. Use of a BINAP/chiral diamine Ru complex effects asymmetric hydrogenation of various ortho-substituted benzophenones and benzoylferrocene to chiral diarylmethanols with consistently high ee.     

Structural scaffold of 18-crown-6 tetracarboxylic acid for optical resolution of chiral amino acid: X-ray crystal analyses and energy calculations of complexes of D- and L-isomers of tyrosine, isoleucine, methionine and phenylglycine

To clarify the structural scaffold of (+)-18-crown-6 tetracarboxylic acid ((+)-18C6H4) for the optical resolution of a chiral amino acid, the crystal structures of its equimolar complexes with L- and D-isomers of tyrosine (Tyr), isoleucine (Ile), methionine (Met) and phenylglycine (PheG) were analysed by X-ray diffraction methods. (+)-18C6H4 took very similar conformations for all complexes. Although the chemical structure of (+)-18C6H4 is C2-symmetric, it took a similar asymmetric ring conformation of radius ca. 6.0 A. In all complexes, the amino group of chiral amino acids was located near the center of the ring and formed three hydrogen bonds and five electrostatic interactions with eight oxygen atoms of the ether ring and carboxyl groups. Also, the Calpha atom of chiral amino acids participated in Calpha-H...O interaction with the oxygen atom of (+)-18C6H4. In contrast, the carboxyl group of chiral amino acids did not directly interact with (+)-18C6H4. These results indicate that the structural scaffold of (+)-18C6H4 for the optical resolution of chiral amino acids is mainly based on the mode of interaction of (+)-18C6H4 with the amino and Calpha-H groups of chiral amino acids. The differences in interaction pattern and binding energy between the L- and D-isomers of each amino acid are discussed in relation to the chiral recognition of (+)-18C6H4.     

Chiral counter-current chromatography of gemifloxacin guided by capillary electrophoresis using (+)-(18-crown-6)-tetracarboxylic acid as a chiral selector

(+)-(18-crown-6)-tetracarboxylic acid (18C6H4) has been known as a highly efficient chiral selector for resolving primary amine enantiomers in capillary electrophoresis (CE). We investigated the chiral separation of gemifloxacin using 18C6H4 in analytical counter-current chromatography (CCC). The separation conditions for CE, including the binding constant, pH, and run buffer constituents, provided a helpful guideline for chiral CCC. A successful separation of gemifloxacin enantiomers could be achieved using a two-phase solvent system composed of 1-butanol-ethyl-acetate-bis(2-hydroxyethyl)aminotris(hydroxymethyl)methane acetate buffer with a small amount of 18C6H4. The hydrophobicity of the solvent system and the 18C6H4 concentration were varied to optimize the chiral separation.     

Diastereoselective proton transfer: a route to enantiomerically pure half-sandwich rhenium complexes

The diastereomeric methyl rhenium complex [CpRe(NO){P(Me)(Ph)(2-C6H4NMe2)}(CH3)] was prepared in two steps from chiral racemic [CpRe(NO)(CO)(NCMe)]BF4 and the chiral racemic phosphine P(Me)(Ph)(2-C6H4NMe2). The unlike diastereomer reacts preferentially with MeSO3H to give the ring-closed ionic complex unlike-[CpRe(NO){P(Me)(Ph)(2-C6H4NMe2)}]MeSO3 along with unreacted like-[CpRe(NO){P(Me)(Ph)(2-C6H4NMe2)}(CH3)], which is easily separated and converted to like-[CpRe(NO){P(Me)(Ph)(2-C6H4NMe2)}]MeSO3. Starting from (R)-P(Me)(Ph)(2-C6H4NMe2), the diastereomerically and enantiomerically pure complexes (RRe,SP)-[CpRe(NO){P(Me)(Ph)(2-C6H4NMe2)}]MeSO3 and (SRe,SP)-[CpRe(NO){P(Me)(Ph)(2-C6H4NMe2)}]MeSO3 were obtained. Thus, this reaction sequence demonstrates a highly diastereoselective proton transfer from a functionalized chiral phosphine to a transition metal. Furthermore, it provides efficient access to enantiomerically pure half-sandwich rhenium complexes.     

Synthesis of novel chiral and acentric coordination polymers by the reaction of zinc or cadmium salts with racemic 3-pyridyl-3-aminopropionic acid

Under hydrothermal (solvothermal) reaction conditions chiral compounds 1, 2, and 3 and one acentric compound 4 were obtained by the reaction of Zn(2+) or Cd(2+) with racemic 3-(3-pyridyl)-3-aminopropionic acid (rac-HPAPA). Compounds 1 and 2 crystallized in chiral space group P2(1)2(1)2(1). At 105 degrees C, racemic 3-pyridyl-3-aminopropionic acid (rac-HPAPA) reacted with Zn(ClO4)(2).6 H2O and dehydrogenated in situ to form the first chiral coordination polymer [Zn[(E)-3-C(5)H4N-C(NH2)=CH-COO]]ClO4 (1) with a beta-dehydroamino acid. Beyond 120 degrees C, the reaction of rac-HPAPA with Zn(ClO4)(2).6 H2O deaminates in situ to form chiral coordination polymer [Zn[(E)-3-C5H4N-CH=CH-COO](OH)] (2). At relatively low temperatures (70 degrees C), the solvothermal reaction of Zn(NO3)(2).6 H2O with rac-HPAPA in methanol does not lead to any change in the ligand and results in the formation of a chiral (P2(1)2(1)2(1)) coordination polymer [Zn(papa)(NO3)] (3). The same reaction of Cd(ClO4)(2).6 H2O with HPAPA also does not lead to any change in ligand and results in the formation of noncentric (Cc) coordination polymer [Cd(papa)(Hpapa)]ClO4.H2O (4). The network topology of both 1 and 3 is 10,3a, while 2 has a diamondoid-like (KDP-like, KDP=potassium dideuterophosphate) network. Particularly interesting from a topological perspective is that 4 has an unprecedented three-dimensional network. Compounds 1, 2, 3, and 4 are all second harmonic generation (SHG) active with 1 exhibiting the strongest response, while only 4 also displays good ferroelectric properties.     

Chiral Pyridine-Based Macrobicyclic Clefts: Synthesis and Enantiomeric Recognition of Ammonium Salts

An achiral (3) and two chiral pyridine-based macrobicyclic clefts (4 and 5) have been prepared by treating 2,6-bis[[2',6'-bis(bromomethyl)-4'-methylphenoxy]methyl]pyridine (2) with the appropriate achiral and chiral glycols. Starting 2 was prepared by first treating 2,6-bis(hydroxymethyl)-4-methylphenol with 2,6-[(tosyloxy)methyl]pyridine followed by phosphorus tribromide. Achiral macrobicyclic cleft 3 formed a complex at 25 degrees C in 50% CH(3)OH/50% CHCl(3) (v/v) with a primary ammonium salt (log K = 3.15) as evidenced by a significant change in the (1)H NMR spectrum. Highly organized (S,S,S,S)-4, prepared by treating 2 with (1S,5S)-3-oxapentane-1,5-diol, exhibited recognition at 25 degrees C in 20% C(2)H(5)OH/80% 1,2-C(2)H(4)Cl(2) (v/v) for the (S)-enantiomer of alpha-(1-naphthyl)ethylammonium perchlorate (NapEt) over its (R)-form (Delta log K = 0.85). This high recognition factor probably reflects an increase in molecular rigidity by the introduction of a second macro ring on the monocyclic pyridinocrown ligand.     

二取双恶唑啉衍生物的合成及其在不对称环丙烷化反应中的应用

通过双亚氨酸盐酸盐与手性胺醇反应简便地合成了二取代双恶唑啉衍生物, 并将其与铜配位运用于重氮醋酸酯对烯烃的不对称环丙化反应, 不对称诱导反应光学产物收率最高达95%d.e.     

光学活性α-取代(2-吡啶基)甲胺的对映选择性合成

以2-羟基蒎烷-3-酮为手性助剂, 与2-氨甲基吡啶缩合得到中间体酮亚胺, 经去质子化、不对称烷基化、转胺反应得到光学活性α-取代(2-吡啶基)甲胺, 对映体过量值为89-98%。并提出了过渡态模型, 对对映选择性合成反应作了较为合理的解释。     

Asymmetric synthesis of beta-hydroxy acid via stereoselective dirhodium(II)-catalyzed C-H insertion of alpha-alkoxydiazoketone

A new methodology for the asymmetric synthesis of beta-hydroxy acid was developed. Dirhodium(II)-catalyzed C-H insertion of alpha-alkoxydiazoketone (3), which was prepared from primary alkyl halide (1) and readily available chiral alpha-hydroxy acid (2), gave stereoselectively 2,5-cis-disubstituted 3(2H)-furanone (4). The Baeyer-Villiger reaction of 4 followed by treatment with an acid afforded chiral beta-hydroxy acid (6) with high optical purity.     

Separation of enantiomers by capillary electrophoresis-mass spectrometry employing a partial filling technique with a chiral crown ether

Enantiomer separations were performed by capillary electrophoresis-mass spectrometry (CE-MS) with (+)-(18-crown-6)-2,3,11,12-tetracarboxylic acid (18C6H4) as a chiral selector. In order to prevent the introduction of the nonvolatile chiral, selector, 18C6H4, into the nozzle of the CE-MS interface and/or the orifice plate, a partial filling technique was employed in this study. By the partial filling technique, the contamination caused by the nonvolatile chiral selector was avoided not only during the analysis but also during the washing of capillary with the separation solution prior to the run. Several racemic compounds having a primary amino group were successfully separated. Racemic 3-aminopyrrolidine and racemic alpha-amino-epsilon-caprolactam have no strong UV absorption, but such compounds were detected with a high sensitivity by MS detection. In this paper, the effects of the length of separation zone and those of the 18C6H4 concentration were described. As the length of the separation zone was longer or as the concentration of 18C6H4 was higher, the enantiomer resolution was enhanced more and more. However, the optimization of 18C6H4 concentration was practically enough to obtain the baseline separation.     

Pseudo-C3-symmetric trisoxazolines as ligands in copper catalyzed enantioselective Diels-Alder reaction

Air- and water-stable chiral catalyst trisoxazolines4-6 /Cu(ClO(4))(2)[middle dot]6H(2)O have been used in the Diels-Alder reaction of cyclopentadiene with acryloyl-2-oxazolidinones or ketoesters. The reaction is carried out in air and up to 82% ee was achieved.     

High enantioselectivity in rhodium-catalyzed allylic alkylation of 1-substituted 2-propenyl acetates

[reaction: see text] Rhodium-catalyzed asymmetric allylic alkylation of 1-substituted 2-propenyl acetates with dimethyl malonate proceeded with high enantioselectivity in the presence of cesium carbonate as a base and a rhodium catalyst generated from Rh(dpm)(C(2)H(4))(2) (dpm = dipivaloylmethanato) and a chiral phosphino-oxazoline whose basic skeleton is axially chiral binaphthyl to give branch alkylation products in greater than 90% ee.     

Chiral separation of gemifloxacin in sodium-containing media using chiral crown ether as a chiral selector by capillary and microchip electrophoresis

Chiral crown ether, (+)-(18-crown-6)-tetracarboxylic acid (18C6H(4)), is an effective chiral selector for resolving enantiomeric primary amines owing to the difference in affinities between 18C6H(4) and each of the amine enantiomers. In addition to the destacking effect of sodium ion in the sample solution, the strong affinity of sodium ion to the polyether ring of crown ether is unfavorable to chiral capillary electrophoresis using 18C6H(4) as a chiral selector. In this report, the chiral separation of gemifloxacin dissolved in a saline sample matrix using 18C6H(4) was investigated. Adding a chelating agent, ethylenediaminetetraacetic acid (EDTA), to the run buffer greatly improved the separation efficiencies and peak shapes. The successful chiral separation of gemifloxacin in a urinary solution was demonstrated for both capillary and microchip electrophoresis.     

Role of the NH2 functionality and solvent in terdentate CNN alkoxide ruthenium complexes for the fast transfer hydrogenation of ketones in 2-propanol

The reaction of [RuCl(CNN)(dppb)] (1; HCNN=6-(4-methylphenyl)-2-pyridylmethylamine) with NaOiPr in 2-propanol/C6D6 affords the alcohol adduct alkoxide [Ru(OiPr)(CNN)(dppb)].n iPrOH (5), containing the Ru-NH2 linkage. The alkoxide [Ru(OiPr)(CNN)(dppb)] (4) is formed by treatment of the hydride [Ru(H)(CNN)(dppb)] (2) with acetone in C6D6. Complex 5 in 2-propanol/C6D6 equilibrates quickly with hydride 2 and acetone with an exchange rate of (5.4+/-0.2) s(-1) at 25 degrees C, higher than that found between 4 and 2 ((2.9+/-0.4) s(-1)). This fast process, involving a beta-hydrogen elimination versus ketone insertion into the Ru-H bond, occurs within a hydrogen-bonding network favored by the Ru-NH2 motif. The cationic alcohol complex [Ru(CNN)(dppb)(iPrOH)](BAr(f)4) (6; Ar(f)=3,5-C6H3(CF3)2), obtained from 1, Na[BAr(f)4], and 2-propanol, reacts with NaOiPr to afford 5. Complex 5 reacts with either 4,4'-difluorobenzophenone through hydride 2 or with 4,4'-difluorobenzhydrol through protonation, affording the alkoxide [Ru(OCH(4-C6H4F)2)(CNN)(dppb)] (7) in 90 and 85 % yield of the isolated product. The chiral CNN-ruthenium compound [RuCl(CNN)((S,S)-Skewphos)] (8), obtained by the reaction of [RuCl2(PPh3)3] with (S,S)-Skewphos and orthometalation of HCNN in the presence of NEt3, is a highly active catalyst for the enantioselective transfer hydrogenation of methylaryl ketones (turnover frequencies (TOFs) of up to 1.4 x 10(6) h(-1) at reflux were obtained) with up to 89% ee. Also the ketone CF3CO(4-C6H4F), containing the strong electron-withdrawing CF3 group, is reduced to the R alcohol with 64% ee and a TOF of 1.5 x 10(4) h(-1). The chiral alkoxide [Ru(OiPr)(CNN)((S,S)-Skewphos)]n iPrOH (9), obtained from 8 and NaOiPr in the presence of 2-propanol, reacts with CF3CO(4-C6H4F) to afford a mixture of the diastereomer alkoxides [Ru(OCH(CF3)(4-C6H4F))(CNN)((S,S)-Skewphos)] (10/11; 74% yield) with 67% de. This value is very close to the enantiomeric excess of the alcohol (R)-CF3CH(OH)(4-C6H4F) formed in catalysis, thus suggesting that diastereoisomeric alkoxides with the Ru-NH2 linkage are key species in the catalytic asymmetric transfer hydrogenation reaction.     

Comparative studies of various run buffers for chiral capillary electrophoresis using chiral crown ether as a chiral selector

In the capillary electrophoretic separation of primary amine enantiomers using (+)-(18-crown-6)-tetracarboxylic acid (18C6H4) as a chiral selector, the presence of run buffer constituents such as tris(hydroxymethyl)aminomethane (Tris) or Na+ competing with analytes for 18C6H4, diminishes the effectiveness of 18C6H4. In order to determine appropriate buffer systems for 18C6H4, various run buffer cationic components including Tris, 1,3-bis[tris(hydroxymethyl)methylamino]propane, bis(2-hydroxyethyl)iminotris(hydroxymethyl)methane, triethanolamine, tetramethylammonium, and Na+ were compared. Quantitative studies of the effects of the competitive constituents were carried out by measuring the electrophoretic mobilities of histidine as a function of the 18C6H4 concentration. We also derived a simple equation to estimate the optimal chiral selector concentration for a maximum mobility difference in the presence of a competitive inhibitor.     

Highly exo-selective and enantioselective cycloaddition reactions of nitrones catalyzed by a chiral binaphthyldiimine-Ni(II) complex

[reaction: see text] Significant levels of exo-selectivity (exo:endo = >99:1 to 86:14) and enantioselectivity (95-82% ee) were obtained in the 1,3-dipolar cycloadditions of a number of nitrones with 3-(2-alkenoyl)-2-thiazolidinethiones, using the chiral binaphthyldiimine-Ni(II) complex (5-20 mol %), which was easily prepared form N,N'-bis(3,5-dichrolo-2-hydroxybenzylidene)-1,1'-binaphthyl-2,2'-diamine and Ni(ClO4)2 x 6H2O in CHCl3 in the presence of 4 A molecular sieves, as a chiral Lewis acid catalyst.     

Direct chemical synthesis of chiral methanol of 98% ee and its conversion to [(2)H1,(3)H]methyl tosylate and [(2)H1,(3)H-methyl]methionine

This paper describes the synthesis of chiral methanols [(R)- and (S)-CHDTOH] in a total of 12 steps starting from (chloromethyl)dimethylphenylsilane. The metalated carbamates derived from (dimethylphenylsilyl)methanol and secondary amines were borylated at low temperatures (-78 or -94 degrees C) using borates derived from tert-butyl alcohol and (+)-pinane-2,3-diol or (R,R)-1,2-dicyclohexylethane-1,2-diol to give diastereomeric boronates (dr 1:1 to 5:1). The carbamoyloxy group could be replaced smoothly with inversion of configuration by an isotope of hydrogen using LiAlH(D)4 [or LiBEt3H(D,T)]. If the individual diastereomeric boronates were reduced with LiAlD4 and oxidized with H2O2/NaHCO3, monodeuterated (dimethylphenylsilyl)methanols of ee > 98% resulted. The absolute configurations of the boronates were based on a single-crystal X-ray structure analysis. Brook rearrangement of the enantiomers of (dimethylphenylsilyl)-[(2)H1,(3)H]methanol prepared similarly furnished the chiral methanols which were isolated as 3,5-dinitrobenzoates in 81% and 90% yield, respectively. For determination of the enantiomeric excesses (98%), the methyl groups were transferred to the nitrogen of (S)-2-methylpiperidine and (3)H{(1)H} NMR spectra were recorded. The Brook rearrangement is a stereospecific process following a retentive course. The chiral methanols were also transformed into methyl tosylates used to prepare [(2)H1,(3)H-methyl]methionines in high overall yields (>80%).     

Competitive binding of a Tris run buffer with chiral crown ether in chiral capillary electrophoresis

In capillary electrophoresis of primary amine racemates using (+)-(18-crown-6)-tetracarboxylic acid (18C6H4) as a chiral selector, chiral recognition emanates from the differences in the complex formation between 18C6H4 and the two protonated amine enantiomers. The presence of buffer constituents such as tris(hydroxymethyl)aminomethane (Tris) or Na+, capable of forming complexes with 18C6H4, is thus detrimental to the chiral separation of primary amines. Such a competitive binding of buffer constituents was studied by comparing the electrophoretic mobilities of racemic analytes obtained in Tris/citric acid and triethylamine/citric acid buffers. We developed a simple fitting method to determine the competitive binding constant and applied it to the Tris buffer system. The competitive binding constant of Tris with 18C6H4 obtained at pH 3.0 was 27 +/- 4.     

Syntheses and structures of two chiral zincophosphite compounds: [Zn(C8H8N2)(HPO3)] and (C6H13N2)[Zn3(C6H12N2)(HPO3)3(H2PO3)

Employing achiral organic amines (2-methylbenzimidazole and 1,4-diazabicyclo[2.2.2]octane) as the structure-directing agent and ligand, two chiral zincophosphites, [Zn(C(8)H(8)N(2))(HPO(3))] 1 and (C(6)H(13)N(2))[Zn(3)(C(6)H(12)N(2))(HPO(3))(3)(H(2)PO(3))] 2, have been hydro(solvo)-thermally synthesized, crystallizing in the chiral space group P2(1)2(1)2(1). Single-crystal structural analysis reveals that compound 1 consists of alternating ZnO(3)N and HPO(3) units exhibiting a neutral one-dimensional chiral chain. Interestingly, the organic ligands interact with the inorganic chain via hydrogen-bonds in hydrogen-bonded helix fashion. Compound 2, a three-dimensional chiral open framework with 16-MR channels, is formed by the distorted {Zn(3)P(4)} secondary building unit (SBU). The organic amine molecules play dual roles as both ligands and countercations.