聚脲多孔材料的简单制备及在酶固定和手性拆分中的应用

以甲苯二异氰酸酯(TDI)为单体,在水与丙酮混合溶剂中通过沉淀聚合一步法制备了富含胺基的聚脲多孔材料(PPU),通过扫描电镜和压汞法对其表面形貌和孔结构进行了表征.PPU经戊二醛(GA)活化后用于荧光假单胞菌脂肪酶(PFL)的固定,考察了GA活化过程中GA浓度对酶固定量及固定酶活性的影响.结果表明,PPU是一种粒子尺寸分布在30~50μm范围的形状不规则的多孔粒子,孔径在2 nm~100μm之间呈连续分布.在pH=8.0的缓冲溶液中用0.17 mol/L的GA对PPU进行改性,将改性后的PPU用于PFL的固定,当酶溶液浓度为2.56 mg/m L时,得到酶的最大固定量为95.2 mg/g,固定酶的活性为375 U/mg,相对活性为76%.将此固定酶作为催化剂,用于1-苯乙醇外消旋化合物的手性拆分,并与游离酶催化的结果相比较.结果表明,固定酶的反应活性和立体选择性都明显优于游离酶.通过沉淀聚合制备的聚脲多孔材料在酶固定及手性分子拆分方面具有应用前景.     

Pd/NH2C3H6-MCM-41催化水介质中的碘苯Ullmann反应

 采用室温共缩聚法合成了胺基改性MCM-41杂化材料(NH2C3H6-MCM-41), 并以此材料为载体制备了负载型Pd催化剂 (Pd/NH2C3H6-MCM-41). 采用X射线衍射、核磁共振、红外光谱、透射电镜、X射线光电子能谱和N2吸附等方法对催化剂进行了表征. 结果表明,催化剂仍保持有MCM-41的孔结构,但其有序度随着 NH2C3H6-基团和Pd含量的增加而降低. 催化剂在以水为溶剂的碘苯偶联反应(Ullmann反应)中显示出优良的催化性能,联苯收率可达63%, 有望为清洁有机合成提供高效非均相催化剂. 胺基修饰的促进作用可归因于催化剂Pd分散度的提高和表面化学性质的改变.     

一步法制备聚脲多孔材料及其对染料的吸附

以甲苯二异氰酸酯为单体, 在水和丙酮混合溶剂中不用致孔剂且无需任何高分子改性一步法合成了聚脲多孔材料(PPU), 通过扫描电镜和BET氮气吸附法对其表面形貌和孔参数进行了表征. 以酸品红(AF)溶液模拟染料废水, 对其在PPU上的吸附进行了研究, 讨论了pH、 吸附时间、 AF初始浓度及吸附剂用量对吸附过程的影响, 优化了吸附条件. 结果表明, PPU对染料AF具有优异的吸附效果. PPU在30℃, pH=3时对AF的最大吸附量为44.60 mg/g. PPU对AF的吸附过程更接近于Langmuir等温吸附的单分子层吸附机理. PPU对水溶性染料刚果红(CR)也有很好的吸附能力. 使用水、 乙醇和水混合溶剂以及NaOH水溶液对染料吸附后的解吸附结果表明, 乙醇和水混合溶剂对吸附染料的解吸效率最高, 对2种染料的解吸附都达90%以上. 解吸后PPU的再吸附能力略有下降, 但第三次吸附量仍达到首次吸附的80%以上.     

倒相法制备多孔PVDF薄膜的条件探索

本文运用倒相法制备了适用于锂离子二次电池用的PVDF多孔隔膜材料 ,通过改变聚合物与溶剂、非溶剂之间的配比 ;控制温度、溶剂挥发速率、在非溶剂浴中的时间等条件 ,得到了一系列多孔PVDF薄膜 ,研究了涂敷溶液中溶剂与非溶剂的浓度对PVDF多孔膜的结构和性质的影响 ,得出了规律性的结论     

脱模溶剂对制备聚苯乙烯表面大孔材料的影响

采用马来酸酐-醋酸乙烯共聚物乳液为模板,分别以水、乙醇和丙酮为脱模溶剂,合成了表面层(厚度为10μm)为大孔结构(孔径为250～400nm)的聚苯乙烯(PS)孔材料.用扫描电子显微镜(SEM)测定了材料表面的微观形貌,SEM照片显示出3种脱模溶剂均能制备PS大孔材料,其中水为脱模溶剂时对PS基材的不利影响最小.用傅立叶红外光谱仪(FTIR)表征了脱模后孔内被固定的特征基团,结果表明,不同的脱模溶剂分别对应不同的孔内基团,即水-羧基、乙醇-酯基及丙酮-酐基.测定了3种脱模溶剂的脱模速率,其顺序为丙酮>>乙醇>水.     

2-(氨基苯基)六氟异丙醇衍生物的合成

以六氟丙酮三水合物和芳香胺为原料,合成了一系列2-芳胺基六氟异丙醇化合物。研究了反应中原料配比、催化剂种类及用量、溶剂种类、反应时间及取代基对反应的影响。结果表明,在六氟丙酮三水合物用量为90 mmol,芳香胺用量为30 mmol,对甲基苯磺酸为催化剂,其用量为苯胺物质量的6%时,回流反应5～35h,反应的转化率和收率分别高达40.1%～100.0%,39.0%～99.0%。同时本文对六氟丙酮三水合物和无水六氟丙酮与苯胺的反应机理进行了比较,推测了六氟丙酮三水合物与苯胺的反应历程,并通过对其中间产物结构的表征进一步确认了该历程。     

高比表面积等级孔γ-Al2O3的金属醇酯一步水解法制备及性能

采用金属醇酯一步水解法, 在不同含水有机溶剂反应介质中在常温条件下制备了具有特殊形貌及等级孔道结构的超高比表面积γ-Al₂O₃材料. X射线衍射(XRD)、 N₂吸附-脱附、 扫描电子显微镜(SEM)和透射电子显微镜(TEM)等表征结果证明, 通过调节反应介质中水含量和溶剂类型可以精确控制仲丁醇铝的水解缩合反应过程和副产物醇分子的扩散行为, 进而优化产物的孔道结构. 研究结果表明, 在水/乙腈体系下制备的γ-Al₂O₃材料整体呈现出由大孔直孔道和三维介孔孔道构成的等级孔道结构, 且随着水含量的增加, 大孔孔壁依次出现光滑状、 片状和褶皱状的特定形貌; 在饱和水的丁醇溶液体系下制备的材料则展现出由厚度约为10 nm的片状γ-Al₂O₃堆积而成的三维介孔结构, 比表面积高达517 m ²/g. 选取水含量为3 mL的水/乙腈体系下的大孔-介孔γ-Al₂O₃材料作为载体制备负载型Pt基催化剂. 负载后载体等级孔结构基本保持完好, 金属Pt纳米颗粒均匀分散在载体上, 该催化剂在渣油脱金属催化反应中的脱金属性能比商用薄水铝石为载体制备Pt基催化剂更加优异. 脱Ni率和脱V率分别提高11.62%和10.83%.     

采用静电纺丝/非溶剂致相分离制备聚丙烯腈多孔超细纤维的研究

以聚丙烯腈/二甲基亚砜/N,N'-二甲基甲酰胺三元体系为纺丝液、3℃水浴为接收介质,通过静电纺丝制备了具有纳米孔结构的静电纺聚丙烯腈多孔超细纤维.探讨了溶剂比例、接收介质、聚丙烯腈浓度、纺丝电压及接收距离等因素对纤维直径和表面孔隙率的影响.结果表明最佳制备条件为混合溶剂质量比1∶1、纺丝电压16 kV、聚丙烯腈浓度15 wt%、接收距离5 cm、纺丝速率0.7 mL/h、环境温度25℃、相对湿度40%～70%.在此条件下得到的聚丙烯腈多孔超细纤维直径在420～490 nm,平均直径468 nm,表面孔隙率3.4%,纤维内部形成大量孔径为8～30 nm的孔结构,且孔径分布均匀,孔形状相对一致.N2吸附脱附测试表明,聚丙烯腈多孔纤维的BET比表面积达43.86 m2/g,是相同直径无孔聚丙烯腈纤维比表面积理论值的6倍.通过研究聚丙烯腈/(二甲基亚砜+N,N'-二甲基甲酰胺)/水的三元相图,提出非溶剂致相分离是主要成孔机理.     

利用呼吸图案法制备聚(苯乙烯-b-丙烯腈)有序多孔薄膜

以自制的聚(苯乙烯-b-丙烯腈)(PS-b-PAN)嵌段共聚物为成膜材料, 采用呼吸图案法制备了有序多孔薄膜, 采用扫描电子显微镜(SEM)对薄膜形貌进行了分析, 研究了聚合物浓度、溶剂种类及共聚物结构对薄膜结构的影响. 结果表明, 薄膜表层为多孔结构, 且孔为圆形、以六方阵列形式排列; 薄膜表层下面是蜂窝状结构.以三氯甲烷(CHCl₃)为溶剂时, 在较高浓度下制备的薄膜表层孔间距较大, 蜂窝结构尺寸较小, 且形成了多层结构. 与CHCl₃为溶剂时相比, 挥发速度较快的二硫化碳(CS₂)作溶剂时制备的多孔薄膜有序性较好, 薄膜表层孔径和孔间距均较大, 蜂窝结构尺寸较小. 以没有PAN链段的聚苯乙烯大分子引发剂(PS-Cl)为成膜材料时, 制备的薄膜表层没有形成多孔结构, 而是形成了窝状结构. 同时, 通过对薄膜表层晕的研究证明了多孔薄膜表层缺陷是由水滴处于液膜下较深的位置造成的.     

高稳定性金属有机配位聚合物膜的制备及二甲苯分离性能

以常见的多孔二氧化硅为载体, 采用晶种-二次生长法在溶剂热条件下制备了高稳定性的金属有机配位聚合物膜材料. 通过X射线衍射、 扫描电子显微镜、 单组分气体透过率和二甲苯同分异构体分离等测试手段对材料的结构、 形貌和性质等进行了表征. 二甲苯同分异构体的渗透汽化分离结果表明, 这种多孔膜材料对二甲苯混合物具有选择性吸附分离的性质. 进一步通过热处理、 超声处理和性能的重复表征, 证明了该膜材料具有优良的热稳定性和机械稳定性, 适于实际应用.     

多环芳二酐型聚酯亚胺膜的透气性能

多环芳二酐型聚酯亚胺膜的透气性能李悦生，丁孟贤，徐纪平（浙江大学高分子科学与工程研究所，杭州，３１００２７）（中国科学院长春应用化学研究所）关键词聚醚酰亚胺，聚酯酰亚胺，膜，透气性通常的聚酰亚胺加工性能较差，在芳环二酐的苯环间引入醚键等柔性基团后，其...     

微量元素与疾病诊断治疗的研究现状及展望

对国内外微量元素与疾病的关系及其诊断治疗的研究现状及研究动向进行了综述，包括：微量元素与地方病、癌肿、心血管病、糖尿病、眼病、神经系统病等。参考文献72篇。     

Determination and study on residue and dissipation of benazolin-ethyl and quizalofop-p-ethyl in rape and soil

A QuEChERS (quick, easy, cheap, effective, rugged, and safe) method for the determination of benazolin-ethyl and quizalofop-p-ethyl in rape and soil by high-performance liquid chromatography-tandem mass spectrometry has been developed in this study. The residue and dissipation of benazolin-ethyl and quizalofop-p-ethyl in rape and soil were determined with the developed method. The half-lives of benazolin-ethyl in rape straw and soil were 3.7–5.1 days and 14.3–26.3 days, respectively. The half-lives of quizalofop-p-ethyl in rape straw and soil were 5.0-6.1 days and 0.3–9.7 days, respectively. The residue of benazolin-ethyl and quizalofop-p-ethyl in rapeseed and soil were below the detection limit (i.e., 0.5?mg?kg^?1, the maximum residue level of European Union for quizalofop-p-ethyl).     

Synthesis and Optical and Redox Properties of Symmetric and Asymmetric BODIPYs

Herein, we present the synthetic route and the photophysical, electrochemical as well as laser properties of novel red‐emitting boron‐dipyrromethenes (BODIPYs) bearing arylethyne moieties. Such functionality is added along the main axis of the chromophore leading to single‐ and double‐substituted derivatives. The relationship between the dye structure and the lasing properties is studied in detail with the help of the photophysical and electrochemical properties as well as quantum mechanical simulations. The asymmetric substitution of the parent dye induces inhomogeneities in the charge distribution, which leads to an overall loss of the fluorescence capacity, mainly in polar media. Such non‐radiative deactivation processes can be softened by decreasing the electron‐donor ability of the substituent or even avoided by symmetrical substitution. Thus, grafting of the arylethyne moieties at the longitudinal axis of the indacene core results in an effective strategy to develop red‐edge BODIPYs with highly efficient and photostable laser emission.     

Ti-V基储氢合金及其氢化物的物相结构与组分优化设计

Ti-V基储氢合金在室温、常压下即可表现出良好的储氢特性,且质量储氢容量明显高于传统AB₅型储氢合金,从而在氢气的精制和回收、运输和储存及热泵等方面有较早的应用。 此外,在混合气体分离、核反应堆中处理氢的同位素、镍氢电池及燃料电池负极材料等方面也得到了广泛的研究与关注。 基于目前Ti-V基储氢合金的研究现状,概述了该类合金的优势、限制性因素(包括成因)及改性手段。 此外,为了进一步理解Ti-V基合金储氢机理、构建合金组分与储氢特性之间的对应关系,本工作重点围绕Ti-V基储氢合金及其氢化物的结构、组分优化设计展开综述,并对其未来研究方向做出展望。     

钒与糖代谢及糖尿病

微量元素钒作为生物体内必需元素，经证实有很重要的生理学功能，与机体糖代谢有十分密切的关系，且能降低糖尿病动物模型的高血糖，极有可能被开发为治疗糖尿病的药物。     

Conformations and steric and stacking interactions of trisubstituted ureas and thioureas with alkyl and phenyl groups

The monomeric ν(N—H) vibrations of various trisubstituted ureas of the R₂UPh type and -thioureas of the R₂TUPh type have been studied. The trans—out isomerism in the former and the trans—out—cis isomerism in the latter are discussed from the point of view of steric effect. The monomeric ν(N—H) vibrations of RPhUPh and RPhTUPh are also examined. The single band appearing in the spectrum of both ureas is characteristic of the cis form; this suggests the existence of phenyl—phenyl interaction (the stacking interaction proposed by Galabov et al. [10]). Behavior of ν(N—H) vibrations at several concentrations is shown to be clearly different in the three forms (trans, out and cis). The presence of the cis form is confirmed by solvent effect experiments.     

Synthesis of Tyrosol and Hydroxytyrosol Glycofuranosides and Their Biochemical and Biological Activities in Cell-Free and Cellular Assays

Tyrosol (T) and hydroxytyrosol (HOT) and their glycosides are promising candidates for applications in functional food products or in complementary therapy. A series of phenylethanoid glycofuranosides (PEGFs) were synthesized to compare some of their biochemical and biological activities with T and HOT. The optimization of glycosylation promoted by environmentally benign basic zinc carbonate was performed to prepare HOT α-L-arabino-, β-D-apio-, and β-D-ribofuranosides. T and HOT β-D-fructofuranosides, prepared by enzymatic transfructosylation of T and HOT, were also included in the comparative study. The antioxidant capacity and DNA-protective potential of T, HOT, and PEGFs on plasmid DNA were determined using cell-free assays. The DNA-damaging potential of the studied compounds for human hepatoma HepG2 cells and their DNA-protective potential on HepG2 cells against hydrogen peroxide were evaluated using the comet assay. Experiments revealed a spectrum of different activities of the studied compounds. HOT and HOT β-D-fructofuranoside appear to be the best-performing scavengers and protectants of plasmid DNA and HepG2 cells. T and T β-D-fructofuranoside display almost zero or low scavenging/antioxidant activity and protective effects on plasmid DNA or HepG2 cells. The results imply that especially HOT β-D-fructofuranoside and β-D-apiofuranoside could be considered as prospective molecules for the subsequent design of supplements with potential in food and health protection.     

Ferrocene and ferrocenium modified clays and their styrene and EVA composites

In this work, ferrocene- and ferrocenium-containing salts were employed to modify montmorillonite. X-ray measurements show an increase in the interlayer spacing upon clay modification, which means that the larger and more organophilic cations were inserted into the gallery space of montmorillonite. Attempts to prepare nanocomposites of polystyrene and ethylene vinyl acetate copolymers lead to immiscible systems; the morphology of these systems was elucidated with TEM, XRD and cone calorimetry. The thermal stability of the composites is greater than that of the virgin polymer.