双波长吸光光度法同时测定多巴和酪氨酸的研究

研究了双波长吸光光度法同时测定多巴和酪氨酸。在 pH 1 2 .0 0的硼砂 氢氧化钠缓冲介质中 ,多巴和酪氨酸的含量分别在 0～ 2 0 .0 μg·ml-1和 0～ 1 9.0 μg·ml-1范围内呈良好线性关系 ,方法检出限和摩尔吸光系数 :多巴为 0 .2 3 μg·ml-1和 1 .2 0× 1 0 4L·mol-1·cm-1,酪氨酸为 0 .2 7μg·ml-1和 1 .48× 1 0 4L·mol-1·cm-1,方法的灵敏度和和选择性均较好 ,应用于尿液中多巴和酪氨酸的测定。     

焙烧富集分离-硒化氢发生原子荧光光谱法测定纯锑中微量硒

研究了一种焙烧富集分离 硒化氢发生原子荧光光谱法测定纯锑中微量硒的方法。在选定的试验条件下 ,方法检出限为 0 .0 1μg·g- 1,线性范围为 0 .0 0 1μg·ml- 1～ 0 .3μg·ml- 1,加标回收率为 94 %～ 99%。用此法测定了 5个纯锑参考样中微量硒 ,结果与参考值一致。     

次甲基蓝-溴酸钾体系动力学光度法测定甲醛

在硫酸介质中 ,基于甲醛对溴酸钾氧化次甲基蓝 (MB)显著的促进作用 ,建立了测定甲醛的动力学光度法。线性范围为 0 .4 8～ 5 .6 0 μg·ml- 1,检出限为 0 .2 2 μg·ml- 1。对浓度水平为 1.6 μg·ml- 1甲醛的 10次平行测定的RSD为 0 .4 86 %。方法用于检测酚醛树脂以及动物标本室内空气中甲醛含量 ,结果满意     

过氧化氢氧化罗丹明6G催化荧光法测定铁

基于在高氯酸溶液中痕量铁对过氧化氢氧化罗丹明 6G具有催化作用 ,建立了催化荧光法测定痕量铁的新方法。方法的检出限为 1.4× 10 - 8g·ml- 1,线性范围为 0 .0 2 0 .6 μg·ml- 1。该方法用于人发、面粉中痕量铁的测定 ,结果满意     

催化动力学交流示波极谱法测定微量钒的研究

研究了在柠檬酸-柠檬酸钠缓冲溶液中,V(Ⅴ)催化过氧化氢氧化茜素红S的褪色反应A其动力学条件,建立了一种高灵敏度、高选择性测量微量V(Ⅴ)的新方法。测定V(Ⅴ)的线性范围为1．0～6．0μg·ml-1,检出限为0．50μg·ml-1,有色溶液及沉淀不干扰测定,优于催化光度法,使得用于常量分析的交流示波极谱法可以进行微量测定。方法用于合金钢中钒的测定,结果满意。     

速差催化荧光法同时测定痕量钴和铜

基于在硼酸 硼砂介质中 ,钴和铜都能催化过氧化氢氧化还原型罗丹明 6G的反应 ,并且产生荧光强度具有加和性的特性 ,建立了速差催化荧光法同时测定痕量钴和铜的新方法。钴和铜的检出限分别为 0 .90ng·ml- 1和 0 .0 5 3μg·ml- 1;测定范围分别为 1.0 0～ 2 0 .0 0ng·ml- 1和 0 .10～1.2 0 μg·ml- 1。将方法用于生物样品中痕量钴和铜的同时测定 ,结果满意     

催化动力学光度法测定痕量碘

基于碘在高碘酸钾氧化亮绿SF增色反应中的催化活性 ,建立了高灵敏度、高选择性的催化动力学光度法测定痕量碘的方法 ,测定范围为 0 .5～ 10 μg·ml- 1,方法检出限为 0 .2 6μg·ml- 1,用于天然水的碘化物测定 ,获得满意结果     

火焰原子吸收光谱法测定重晶石中锌铜铁

提出了火焰原子吸收光谱法测定重晶石中锌、铜和铁的方法 ,相对标准偏差为 1 .7%～7.3% ,加标回收率在 95.2 %～ 1 0 3.2 %之间。特征浓度锌为 0 .0 1 0 μg·ml-1/1 % ,铜为 0 .0 35μg·ml-1/1 % ,铁为 0 .0 67μg· ml-1/1 %。方法简便、准确、可靠。     

催化光度法测定痕量甲醛

基于磷酸介质中甲醛催化溴酸钾氧化溴甲酚紫的褪色反应 ,建立了测定痕量甲醛的方法。方法的检出限为 1.0× 10 - 5g·L- 1,线性范围为 0 .0 2 0～ 0 .4 8μg·ml- 1,方法简便 ,用于空气中测定痕量甲醛 ,结果满意。     

电位溶出法同时测定锌镉铅的研究

探讨了一种同时测定锌、镉、铅的溶出分析方法。在 0 .0 17mol·L- 1H2 SO4 HNO3混合酸介质中 ,用同位镀汞法在电位 - 1.5 0V条件下电解富集 60s ,锌、镉、铅分别在 - 1.0 7,- 0 .65及 - 0 .4 6V处有一良好的溶出峰 ,锌浓度在 0 .0 0 2 5～ 0 .0 2 5 μg·ml- 1,镉和铅在 0 .0 0 2 5～ 0 0 2 3μg·ml- 1范围内与峰高呈良好的线性关系 ,检出限锌为 0 .0 0 0 75 μg·ml- 1,镉和铅为 0 .0 0 0 70 μg·ml- 1。方法操作简便、快速、准确。用于环境水质标样、纯净水及自来水中锌、镉、铅的同时测定 ,均获得满意结果     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.