Luminescent core–shell Fe3O4@Gd2O3:Er3+, Li+ composite particles with enhanced optical properties

Bifunctional magneto-optical nanocomposites with Fe₃O₄ nanoparticles as a core and erbium and lithium codoped gadolinium (Gd₂O₃:Er³⁺, Li⁺) as the shell were synthesized successfully using a simple urea homogeneous precipitation method. The fabricated Fe₃O₄@Gd₂O₃:Er³⁺, Li⁺ particles were characterized by X-ray diffraction, field emission scanning electron microscopy, transmission electron microscopy, photoluminescence spectroscopy and quantum design vibrating sample magnetometry. The upconversion emission intensity was enhanced significantly comparing to that without Li⁺ ions. These bifunctional composites are expected to be potentially applied for drug delivery, cell separation and bioimaging.     

Effects of nano-YAG (Y3Al5O12) crystallization on the structure and photoluminescence properties of Nd3+-doped K2O–SiO2–Y2O3–Al2O3 glasses

Nd³⁺-doped precursor glass in the K₂O–SiO₂–Y₂O₃–Al₂O₃ (KSYA) system was prepared by the melt-quench technique. The transparent Y₃Al₅O₁₂ (YAG) glass–ceramics were derived from this glass by a controlled crystallization process at 750 °C for 5–100 h. The formation of YAG crystal phase, size and morphology with progress of heat-treatment was examined by X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM) and Fourier transformed infrared reflectance spectroscopy (FT-IRRS). The crystallite sizes obtained from XRD are found to increase with heat-treatment time and vary in the range 25–40 nm. The measured photoluminescence spectra have exhibited emission transitions of ⁴F_3/2 → ⁴I_J (J = 9/2, 11/2 and 13/2) from Nd³⁺ ions upon excitation at 829 nm. It is observed that the photoluminescence intensity and excited state lifetime of Nd³⁺ ions decrease with increase in heat-treatment time. The present study indicates that the incorporation of Nd³⁺ ions into YAG crystal lattice enhance the fluorescence performance of the glass–ceramic nanocomposites.     

CTAB-assisted hydrothermal synthesis of YVO4:Eu powders in a wide pH range

Rhombus-, rod-, soya bean- and aggregated soya bean-like YVO₄:Eu³⁺ micro- and nanostructures were synthesized by a cetyltrimethylammonium bromide (CTAB)-assisted hydrothermal method at 180 °C for 24 h in a wide pH range. The as-synthesized powders were characterized by X-ray powder diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and photoluminescence spectroscopy (PL). The XRD results confirmed the formation of phase-pure YVO₄:Eu³⁺ powders with tetragonal structure under hydrothermal process in a wide pH range. Electron microscopic observations evidenced the morphological transformation of YVO₄:Eu³⁺ powders from rhombus-like microstructure to rod-, soya bean, and aggregated soya bean-like nanostructures with an increase in the pH of the synthesis solution. The results from the PL measurements revealed that the intensities of PL emission peaks were significantly affected by the morphologies and crystallinity of samples due to the absence of an inversion symmetry at the Eu³⁺ lattice site, and the highest luminescence intensity was observed for rod-like YVO₄:Eu³⁺ powders.     

AgPt nanoparticles supported on magnetic graphene oxide nanosheets for catalytic reduction of 4‐nitrophenol: Studies of kinetics and mechanism

Ag_x Pt_100−x (x  = 0, 25, 50, 75 and 100) nanoparticles were grown on the surface of magnetic graphene oxide nanosheets (Fe₃O₄@GO) for the first time. The as‐prepared nanocomposites were characterized using various techniques such as Fourier transform infrared spectroscopy, powder X‐ray diffraction, field emission scanning electron microscopy, energy‐dispersive X‐ray spectroscopy, transmission electron microscopy, Brunauer–Emmett–Teller surface area analysis, vibrating sample magnetometry and thermogravimetric analysis. The Fe₃O₄@GO‐Ag_x Pt_100−x catalysts were applied in the reduction of 4‐nitrophenol (4‐NP) to 4‐aminophenol using sodium borohydride (NaBH₄). The synthesized nanocomposites exhibited excellent catalytic performance in the reduction of 4‐NP with high recyclability for five consecutive runs. The Fe₃O₄@GO‐Ag₇₅Pt₂₅ nanocomposite exhibited the best catalytic activity with a rate constant as high as 140.6 × 10⁻³ s⁻¹. The obtained kinetic data were modelled with the Langmuir–Hinshelwood equation. The energy of activation and thermodynamic parameters including enthalpy, entropy of activation and activation Gibbs free energy were calculated.     

Decoration of carbon nanotubes with iron oxide

A magnetic composite of multiwalls carbon nanotubes (MWNTs) decorated with iron oxide nanoparticles was synthesized successfully by a simple and effective chemistry precipitation method. The composite was characterized by X-ray diffraction analysis (XRD), Mössbauer spectrum (MS), transmission electron microscopy (TEM), and Fourier transform spectroscopy (FTIR) techniques. The patterns of XRD and MS indicated that MWNTs, γ-Fe₂O₃, and Fe₃O₄ coexisted in the composite. The TEM observation indicated that the nanoparticles of iron oxide were attached on the surface of the MWNTs, and the sizes of the particles ranged from 25 to 80 nm. FTIR spectra showed that SO₄⁻ functional groups existed on the surface of MWNTs after modification by sodium dodecylbenzene sulfonic acid (SDBS), which could immobilize Fe³⁺ ions onto the MWNTs. The hysteresis loops of the MWNTs and decorated MWNTs were measured by vibrating sample magnetometer (VSM), and the results showed that the composite was ferromagnetism with the saturated magnetization of 20.07 emu/g, and the coercive of 163.44 Oe.     

Warm white light from Y4MgSi3O13:Bi, Eu nanophosphor for white light-emitting diodes

Y₄MgSi₃O₁₃:Bi³⁺, Eu³⁺ nanophosphors have been prepared by a facile sol–gel method. The products have been characterized by X-ray diffraction, field-emission scanning electron microscopy and fluorescence measurements. The results show that the nanophosphors are of single phase hexagonal Y₄MgSi₃O₁₃ with size-distribution of 50–90 nm in diameter. White-light emission has been obtained from Bi³⁺ and Eu³⁺ co-doped Y₄MgSi₃O₁₃ nanophosphors upon excitation of 350 nm ultraviolet light. It is noted that Bi³⁺ ions can occupy two different Y³⁺ sites and generate different emissions from the ³p₁ → ¹s₀ transition. Warm white light has been obtained from Y₄MgSi₃O₁₃:Bi³⁺, Eu³⁺ nanophosphors according to Commission International de I’Eclairage (CIE) chromaticity coordinates and color temperature (T_c) with appropriately adjusted contents of Bi³⁺ and Eu³⁺. The results indicate that Y₄MgSi₃O₁₃:0.08Bi³⁺, 0.04Eu³⁺ (x = 0.31, y = 0.31, T_c = 6907 K) are potential nanophosphors for white light-emitting diodes (LEDs) applications.     

Facile synthesis of multifunctional multiwalled carbon nanotubes/Fe3O4 nanoparticles/polyaniline composite nanotubes

With an average diameter of 100-150 nm, composite nanotubes of polyaniline (PANI)/multiwalled carbon nanotubes (MWNTs) containing Fe₃O₄ nanoparticles (NPs) were synthesized by a two-step method. First, we synthesized monodispersed Fe₃O₄ NPs (d=17.6 nm, σ=1.92 nm) on the surface of MWNTs and then decorated the nanocomposites with a PANI layer via a self-assembly method. SEM and TEM images indicated that the obtained samples had the morphologies of nanotubes. The molecular structure and composition of MWNTs/Fe₃O₄ NPs/PANI nanotubes were characterized by Fourier transform infrared spectra (FTIR), energy dispersive X-ray spectrometry (EDX), X-ray photoelectron spectra (XPS), X-ray diffraction (XRD) and Raman spectra. UV-vis spectra confirmed the existence of PANI and its response to acid and alkali. As a multifunctional material, the conductivity and magnetic properties of MWNTs/Fe₃O₄ NPs/PANI composites nanotubes were also investigated.     

Preparation and characterization of flexible polyurethane foam nanocomposites reinforced by magnetic core-shell Fe3O4@APTS nanoparticles

Novel magnetic polyurethane flexible foam nanocomposites were synthesized by incorporation of aminopropyltriethoxysilane (APTS) functionalized magnetite nanoparticles (MNPs) via one-shot method. The functionalized MNPs (Fe₃O₄@APTS) were synthesized by co-precipitation of the Fe²⁺ and Fe³⁺ with NH₄OH and further functionalization with APTS onto the surface of MNPs by sol–gel method. The magnetic core-shell NPs were used up to 3.0 % in the foam formulation and the magnetic nanocomposites prepared successfully. The results of thermogravimetric analysis (TGA) showed an increasing in thermal stability of polyurethane nanocomposite foam at initial, 5 and 10 %, and maximum thermal decomposition temperatures by incorporation of Fe₃O₄@APTS. In addition SEM images revealed the uniformity of the foam structures and decreasing in pore sizes. Furthermore, VSM result showed super paramagnetic behavior for Fe₃O₄@APTS-PU nanocomposites.     

Synthesis of Fe3O4/CuO/ZnO/RGO and its catalytic degradation of dye wastewater using dielectric barrier discharge plasma

The design of an efficient and green dye degradation technology is of great significance to mitigate water pollution as well as ecological damage. Fe₃O₄/CuO/ZnO/RGO was prepared by solvothermal synthesis and homogeneous precipitation. X-ray diffraction (XRD), field emission scanning electron microscope (FESEM), transmission electron microscopy (TEM), and vibrating-sample magnetometry (VSM) were used to characterize the samples, to explore the morphology and structural composition of the composites. To enhance the degradation efficiency, a dielectric barrier discharge (DBD)–Fe₃O₄/CuO/ZnO/RGO co-catalytic system was created based on the DBD plasma technology. Response surface methodology analysis results demonstrate that the degradation effect of DBD–Fe₃O₄/CuO/ZnO/RGO is optimal and the decolorization rate is 95.06 % when the solution pH is 3, conductivity is 0.5 mS/cm, the input voltage is 90 V, and Fe₃O₄/CuO/ZnO/RGO concentration is 0.18 g/L. Therefore, this study offers a novel method for dye degradation and confirms the viability of a DBD–Fe₃O₄/CuO/ZnO/RGO synergistic catalytic system.     

Studies on hydrothermal synthesis of photolumniscent rare earth (Eu3+ & Tb3+) doped NG@FeMoO4 for enhanced visible light photodegradation of methylene blue dye

FeMoO₄ nanorods and their rare earth (Eu³⁺ and Tb³⁺) doped composites with nitrogen doped graphene (NG) were synthesized by facile hydrothermal method in aqueous medium. X-ray diffraction (XRD) analysis of the as-synthesized samples was done to study the phase purity and crystalline nature. FTIR and Raman Spectroscopy have been studied for investigating the bonding in nanostructures. The surface morphology of the samples was investigated with field emission scanning electron microscopy (FE-SEM) and transmission electron microscopy (TEM). The photolumniscent nature of the samples was investigated by the using the fluorescence spectrophotometer. The photocatalytic degradation efficiency of the prepared pure FeMoO₄ and its rare earth doped composites with nitrogen doped graphene was evaluated as function of visible light irradiation versus concentration of methylene blue (MB dye). The prepared nanocomposites show enhanced photocatalytic efficiency as compared to the bare FeMoO₄ nanorods.     

Synthesis of Co2+-doped Fe2O3 photocatalyst for degradation of pararosaniline dye

In this paper, x (=2, 5, 7 and 10mol%) Co²⁺-doped Fe₂O₃ (xCo:Fe₂O₃) nanoparticles with enhanced photocatalytic activity have been reported. xCo:Fe₂O₃ nanoparticles were successfully prepared by co-precipitation followed thermal decomposition method. The structural, optical and morphological properties of the prepared samples were studied by X-ray diffraction (XRD), Fourier transform infrared (FT-IR), X-ray photoelectron spectroscopy (XPS), diffuse reflectance (DR) UV–visible absorption spectroscopy, scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The obtained results revealed that Co²⁺ ions were well doped within the lattices of Fe₂O₃. Also, Co²⁺ ions suppress the formation of the most stable α- Fe₂O₃ and stabilize less stable γ-Fe₂O₃ at 450 °C. The photocatalytic activity of xCo:Fe₂O₃ was examined by using pararosaniline (PR) dye. It was found that photocatalytic degradation of PR depends on dopant concentration (Co²⁺ ions). Relatively, the highest photocatalytic activity was observed for 5%Co:Fe₂O₃ nanoparticles. The plausible photocatalytic degradation pathway of PR at xCo:Fe₂O₃ surface has also been proposed.     

Fractional precipitation synthesis and photoluminescence of La2Ti2O7:xEu3+ phosphors

Eu³⁺ ions activated La₂Ti₂O₇ (La₂Ti₂O₇:xEu³⁺) phosphors have been successfully synthesized by a fractional precipitation method from commercially available La₂O₃, Eu₂O₃, HNO₃, Ti(SO₄)₂·9H₂O and NH₃·H₂O as the starting materials. Detailed characterizations of the synthetic products were obtained by fourier transform infrared spectroscopy (FT-IR), X-ray diffractometry (XRD), differential thermal analysis, thermogravimetry and derivative thermogravimetry (DTA-TG-DTG), transmission electron microscopy (TEM), and photoluminescence (PL) spectroscopy. The results show that the precursor is composed of amorphous particles with quasi-spherical in shape and about 50 nm in size. Moreover, the precursor could be converted into pure La₂Ti₂O₇ phase by calcining at 1000 °C for 2 h in air. The as-synthesized La₂Ti₂O₇ particles are approximate polyhedron in shape and about 100–200 nm in size. PL spectroscopy of La₂Ti₂O₇:xEu³⁺ phosphors reveals that the strongest emission peak is located at 616 nm under 275 nm ultraviolet (UV) light excitation, which corresponds to the ⁵D₀→⁷F₂ transition of Eu³⁺ ions. The quenching concentration of Eu³⁺ ions is 10.0 mol%, and its corresponding fluorescence lifetime was 1.82 ms according to the linear fitting result. Decay study reveals that the ⁵D₀→⁷F₂ transition of Eu³⁺ ions has a single exponential decay behavior.     

Facile and controllable one-step fabrication of molecularly imprinted polymer membrane by magnetic field directed self-assembly for electrochemical sensing of glutathione

Based on magnetic field directed self-assembly (MDSA) of the ternary Fe₃O₄@PANI/rGO nanocomposites, a facile and controllable molecularly imprinted electrochemical sensor (MIES) was fabricated through a one-step approach for detection of glutathione (GSH). The ternary Fe₃O₄@PANI/rGO nanocomposites were obtained by chemical oxidative polymerization and intercalation of Fe₃O₄@PANI into the graphene oxide layers via π–π stacking interaction, followed by reduction of graphene oxide in the presence of hydrazine hydrate. In molecular imprinting process, the pre-polymers, including GSH as template molecule, Fe₃O₄@PANI/rGO nanocomposites as functional monomers and pyrrole as both cross-linker and co-monomer, was assembled through N–H hydrogen bonds and the electrostatic interaction, and then was rapidly oriented onto the surface of MGCE under the magnetic field induction. Subsequently, the electrochemical GSH sensor was formed by electropolymerization. In this work, the ternary Fe₃O₄@PANI/rGO nanocomposites could not only provide available functionalized sites in the matrix to form hydrogen bond and electrostatic interaction with GSH, but also afford a promoting network for electron transfer. Moreover, the biomimetic sensing membrane could be controlled more conveniently and effectively by adjusting the magnetic field strength. The as-prepared controllable sensor showed good stability and reproducibility for the determination of GSH with the detection limit reaching 3 nmol L⁻¹ (S/N = 3). In addition, the highly sensitive and selective biomimetic sensor has been successfully used for the clinical determination of GSH in biological samples.     

Fabrication and photoluminescence properties of Ag0 and Ag0–Er3+ containing plasmonic glass nanocomposites in the K2O–ZnO–SiO2 system

Here, we report the preparation of nano silver (Ag) and nano Ag-erbium (Ag–Er) co-embedded potassium–zinc-silicate based monolithic glass nanocomposites by a controlled heat-treatment process of precursor glasses. The nanocomposites were characterized by differential scanning calorimeter, dilatometer, UV–Visible absorption spectrophotometer, X-ray diffractometer and transmission electron microscope and spectroflurimeter. A strong surface plasmon resonance (SPR) band is observed around 430 nm in all the heat-treated glass nanocomposite samples due to the formation of Ag⁰ nanoparticles (NP). The Ag-glass nanocomposite samples display nearly 2-fold enhanced photoluminescence (PL) at 470 nm upon excitation at 290 nm until the size of the NP increases to the value equals to the mean free path of conduction electrons inside the particles. On contrary to this, the photoluminescence spectra of Er³⁺ ions exhibit a gradual decrease of NIR emission at 1540 nm due to ⁴I_13/2 → ⁴I_15/2 transition under excitation at 523 nm in the heat-treated glass nanocomposites which happened due to excitation energy transfer of Er³⁺ ions to the Ag NP, acting as ‘plasmonics diluents’ for Er³⁺ ions. These nanocomposites have huge potential for various nanophotonic applications.     

Fabrication and luminescent properties of the core-shell structured YNbO4:Eu/Tb@SiO2 spherical particles

The core-shell structured YNbO₄:Eu³⁺/Tb³⁺@SiO₂ particles were realized by coating the YNbO₄:Eu³⁺/Tb³⁺ phosphors onto the surface of spherical silica via a sol-gel process. The obtained materials were characterized by means of X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), Fourier transform IR spectroscopy (FT-IR), photoluminescence (PL) spectra, and cathodoluminescence (CL) spectra. The results indicate that 600 °C annealed samples consist of amorphous silica core and crystalline YNbO₄:Re shell, having perfect spherical morphology with uniform size distribution. Upon excitation by UV or electron beam, these phosphors show the characteristic ⁵D₀-⁷F_1-4 emission lines of Eu³⁺ and the characteristic ⁵D₄-⁷F_3-6 emission lines of Tb³⁺. The PL intensities of Eu³⁺ can be tuned by altering the annealing temperature and the coating number of YNbO₄:Eu³⁺ layers.     

Facile synthesis of multifunctional attapulgite/Fe3O4/polyaniline nanocomposites for magnetic dispersive solid phase extraction of benzoylurea insecticides in environmental water samples

In this study, the superparamagnetic attapulgite/Fe₃O₄/polyaniline (ATP/Fe₃O₄/PANI) nanocomposites were successfully synthesized by a one-pot method. Fe (III) was applied as both the oxidant for the oxidative polymerization of aniline and the single iron source of Fe₃O₄ formed by the redox reaction between aniline and Fe (III). The ATP/Fe₃O₄/PANI was used as sorbent for magnetic dispersive solid phase extraction (MDSPE) of benzoylurea insecticides (BUs) in environmental water samples. The as-prepared nanocomposite sorbents were characterized by Fourier transform infrared spectra (FT-IR), X Ray diffraction (XRD), scanning electron microscopy(SEM), transmission electron microscopy (TEM), and vibrating sample magnetometry. Various experimental parameters affecting the ATP/Fe₃O₄/PANI-based MDSPE procedure, including the composition of the nanocomposite sorbents, amount of ATP/Fe₃O₄/PANI nanocomposites, vortex time, pH, and desorption conditions were investigated. Under the optimal conditions, a good linearity was observed for all target analytes, with correlation coefficients (r²) ranging from 0.9985 to 0.9997; the limits of detection (LOD) were in the range of 0.02–0.43 μg L⁻¹, and the recoveries of analytes using the proposed method ranged between 77.37% and 103.69%. The sorbents exhibited an excellent reproducibility in the range of 1.52–5.27% in extracting the five target analytes. In addition, the intra-day and inter-day precision values were found to be in the range of 0.78–6.86% and 1.66–8.41%, respectively. Finally, the proposed ATP/Fe₃O₄/PANI-based MDSPE method was successfully applied to analyze river water samples by rapid preconcentration of BUs.     

Eu,Dy co-doped SrAl<Subscript>2</Subscript>O<Subscript>4</Subscript> phosphors prepared by sol–gel-combustion processing

SrAl₂O₄:Eu²⁺, Dy³⁺ powders were synthesized by sol–gel–combustion process using metal nitrates as the source of metal ions and citric acid as a chelating agent of metal ions. The amounts of citric acid in mole were two times those of the metal ions. By tracing the formation process of the sol–gel, it is found that decreasing the amount of NO₃ ⁻ in the solution is necessary for the formation of transparent sol and gel, and the dropping of ethanol into the precursor solution can decrease the amount of NO₃ ⁻ in the solution. By combusting citrate sol at 600 °C, followed by heating the resultant combustion ash at 1,100–1,300 °C in a weak reductive atmosphere containing active carbon, SrAl₂O₄:Eu²⁺, Dy³⁺ phosphors can prepared. X-ray diffraction, Thermogravimetry–differential thermal analysis, scanning electron microscopy and fluorescence spectrophotometer were used to investigate the formation process and luminescent properties of the as-synthesized SrAl₂O₄:Eu²⁺, Dy³⁺. The results reveal that the SrAl₂O₄ crystallizes completely when the combustion ash was sintered at 1,200–1,300 °C. The excitation and emission spectra indicate that excitation broadband mainly lies in a visible range and the phosphors emit strong light at 510 nm under the excitation of 348 nm. The afterglow of phosphors lasts for over 10 h when the excited source is cut off.     

Solvothermal synthesis and luminescent properties of monodisperse LaPO4:Ln (Ln=Eu, Ce, Tb) particles

Monodisperse rare-earth ion (Eu³⁺, Ce³⁺, Tb³⁺) doped LaPO₄ particles with oval morphology were successfully prepared through a facile solvothermal process without further heat treatment. X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectra (XPS), Fourier transform infrared spectroscopy (FT-IR), photoluminescence (PL) spectra and the kinetic decays were performed to characterize these samples. The XRD results reveal that all the doped samples are well crystalline at 180 °C and assigned to the monoclinic monazite-type structure of the LaPO₄ phase. It has been shown that all the as-synthesized samples show perfectly oval morphology with narrow size distribution. The possible growth mechanism of the LaPO₄:Ln has been investigated as well. Upon excitation by ultraviolet radiation, the LaPO₄:Eu³⁺ phosphors show the characteristic ⁵D₀−⁷F_1-4 emission lines of Eu³⁺, while the LaPO₄:Ce³⁺, Tb³⁺ phosphors demonstrate the characteristic ⁵D₄−⁷F_3-6 emission lines of Tb³⁺.     

Synthesis and photoluminescence of the Y2O3:Eu3+ phosphor nanowires in AAO template

The monodisperse array and nanowires of Y₂O₃:Eu³⁺ phosphor were synthesized using anodic aluminum oxide (AAO) template by sol–gel method. Scanning electron microscope (SEM) images indicated that Y₂O₃:Eu³⁺ nanowires are parallelly arranged, all of which are in uniform diameter of about 50 nm. The high-magnification SEM image showed that each nanowire is composed of a lot of agglutinating particles. The patterns of selected-area electron diffraction confirmed that Y₂O₃:Eu³⁺ nanowires mainly consist of polycrystalline materials. Excitation and emission spectra of Y₂O₃:Eu³⁺/AAO composite films were measured. The characteristic red emission peak of Eu³⁺ ion attributed to ⁵D₀→⁷F₂ transition in Y₂O₃:Eu³⁺/AAO nanowires broadened its halfwidth.     

Highly sensitive simultaneous quantification of buprenorphine and norbuprenorphine in human plasma by magnetic solid-phase extraction based on P<Emphasis Type="Italic">p</Emphasis>PDA/Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> nanocomposite and high-performance liquid chromatography

A rapid and sensitive method based on magnetic solid-phase extraction coupled to high-performance liquid chromatography with ultraviolet detection was developed for the simultaneous determination of buprenorphine (BPN) and its major metabolite, norbuprenorphine (N-BPN), in human plasma samples. Poly (para-phenylenediamine)-modified Fe₃O₄ nanoparticles (PpPDA/Fe₃O₄) were synthesized and used as a magnetic adsorbent for the extraction and preconcentration of BPN and N-BPN in biological samples. The synthesized nanocomposites were characterized by X-ray diffraction, Fourier transform infrared spectroscopy, field emission scanning electron microscopy, transmission electron microscopy, energy-dispersive X-ray spectroscopy and vibrating sample magnetometery. An isocratic separation was achieved on a Nova-Pak C18 reversed-phase column using a mobile phase consisting phosphate buffer (pH 3.4) and acetonitrile (50:50, v/v) at a flow rate of 1.0 mL min^?1. The detection was conducted at 280 nm. Under the optimum conditions, the calibration curves for BPN and N-BPN were linear in the ranges 3.0–150.0 and 1.0–120.0 ng mL^?1, respectively. The sensitivity was also high with limit of detection of 0.8 and 0.3 ng mL^?1 for BPN and N-BPN in plasma, respectively. The method was successfully applied to the extraction and determination of BPN and N-BPN in human plasma samples with an average recovery of 98.10 and 96.41%, respectively.