Electrochemical properties of liquid electrolyte added quasi-solid state TiO2 dye-sensitized solar cells

In this study a process has been introduced to replace traditional liquid or solid electrolyte coatings on dye-sensitized photoelectrode in solar cells. This process has more efficient diffusion of electrolyte, hence higher sensitivity. Better interfacial contact between polymer electrolyte and TiO₂ photoelectrode had improved electrochemical response and ionic conductivity of cell. Conductivity of this electrode was 9.33 × 10⁻³ S cm⁻¹ (at room temperature), which is much higher than the using traditional process for addition of electrolytes. It has 0.68 V open-circuit voltage and 3.19 mA cm⁻² short-circuit current density. Energy conversion efficiency of this cell was about 37% higher than the cell developed with traditional processes under constant light intensity (45 mW cm⁻²).     

Potentiostatically deposited nanostructured α-Co(OH)2: A high performance electrode material for redox-capacitors

A high specific capacitance was obtained for α-Co(OH)₂ potentiostatically deposited onto a stainless-steel electrode in 0.1 M Co(NO₃)₂ electrolyte at −1.0 V vs. Ag/AgCl. The structure and surface morphology of the obtained α-Co(OH)₂ were studied by using X-ray diffraction analysis and scanning electron microscopy. A network of nanolayered α-Co(OH)₂ sheets was obtained; the average thickness of individual α-Co(OH)₂ sheets was 10 nm, and the thickness of the deposit was several micrometers. The capacitive characteristics of the α-Co(OH)₂ electrodes were investigated by means of cyclic voltammetry and constant current charge–discharge cycling in 1 M KOH electrolyte. A specific capacitance of 860 F g⁻¹ was obtained for a 0.8 mg cm⁻² α-Co(OH)₂ deposit. The specific capacitance did not decrease significantly for the active mass loading range of 0.1–0.8 mg cm⁻² due its layered structure, which allowed easy penetration of electrolyte and effective utilization of electrode material even at a higher mass. This opens up the possibility of using such materials in supercapacitor applications.     

Development of micro-tubular SOFCs with an improved performance via nano-Ag impregnation for intermediate temperature operation

Micro-tubular solid-oxide fuel cell consisting of a 10-μm thick (ZrO₂)_0.89(Sc₂O₃)_0.1(CeO₂)_0.01 (ScSZ) electrolyte on a support NiO/(ScSZ) anode (1.8 mm diameter, 200 μm wall thickness) with a Ce_0.8Gd_0.2O_1.9 (GDC) buffer-layer and a La_0.6Sr_0.4Co_0.2Fe_0.8O_3−δ (LSCF)/GDC functional cathode has been developed for intermediate temperature operation. The functional cathode was in situ formed by impregnating the well-dispersed nano-Ag particles into the porous LSCF/GDC layer using a citrate method. The cells yielded maximum power densities of 1.06 W cm⁻² (1.43 A cm⁻², 0.74 V), 0.98 W cm⁻² (1.78 A cm⁻², 0.55 V) and 0.49 W cm⁻² (1.44 A cm⁻², 0.34 V), at 650, 600 and 550 °C, respectively.     

Fabrication of porous Co/NiO core/shell nanowire arrays for electrochemical capacitor application

We report self-supported porous Co/NiO core/shell nanowire arrays via the combination of hydrogen reduction and chemical bath deposition methods. The Co nanowire acts as the backbone for the growth of NiO nanoflake shell forming hierarchically porous Co/NiO core/shell nanowire arrays. As electrode materials for pseudo-capacitors, the Co/NiO core/shell nanowire arrays exhibit a specific capacitance of 956 F g^− 1 at 2 Å g^− 1 and 737 F g^− 1 at 40 Å g^− 1, and good cycling stability, which is mainly due to the metal nanowire based core/shell nanowire architecture which provides good conductive network as well as fast ion/electron transfer and sufficient contact between active materials and electrolyte.     

A new promising high temperature lithium battery solid electrolyte

Lithium lanthanoid silicates find importance as a solid electrolyte in high temperature lithium batteries in view of its high ionic conductivity at high temperatures. An first ever attempt is made to synthesis a new high temperature solid electrolyte viz., lithium samarium holmium silicate by sol–gel process and it has been characterized by thermal analysis (TGA–DTA), X-ray diffraction (XRD), infrared spectroscopy (FTIR) and scanning electron microscopy (SEM). Lithium ion conductivity of 0.8087 × 10⁻⁷ Ω⁻¹ cm⁻¹ at 25 °C was obtained and it increases with increasing temperature. For the first time a highest conductivity of 0.1095 × 10⁻² Ω⁻¹ cm⁻¹ was obtained at 850 °C which is high compared to other high temperature lithium battery solid electrolytes.     

Proton-conducting solid oxide fuel cell (SOFC) with Y-doped BaZrO3 electrolyte

Y-doped BaZrO₃ (BZY) electrolyte films are successfully fabricated by utilizing the driving force from the anode substrate, aiming to circumvent the refractory nature of BZY materials. The BZY electrolyte film on the high shrinkage anode becomes dense after sintering even though no sintering aid is added, while the BZY electrolyte remains porous on the conventional anode substrate after the same treatment. The resulting BZY electrolyte shows a high conductivity of 4.5 × 10^− 3 S cm^− 1 at 600 °C, which is 2 to 20 times higher than that for most of BZY electrolyte films in previous reports. In addition, the fuel cell with this BZY electrolyte generates a high power output of 267 mW cm^− 2 at 600 °C. These results suggest the strategy presented in this study provides a promising way to prepare BZY electrolyte films for fuel cell applications.     

Amidinium salts: Towards enabling electrochemistry in non-polar media from alkanes to ionic liquids

There is little known about electrochemical behavior in non-polar media due to lack of compatible, hydrophobic salts. In this work, this difficult challenge has been overcome by following a strategy based on designing and synthesizing a novel family of organic salts with highly-delocalized cations and anions. The salts are based on the amidinium cation with highly-delocalized positive charge and long alkyl groups that enable good miscibility in heptane, an archetypical, non-polar media, while being hydrophobic, room-temperature ionic liquids. The electrolyte solutions show ionic conductivities that span the range 10^− 11–10^− 4 S cm^− 1 and electrochemical activity which enable their application as antistatic agents and also as new type of hydrophobic electrolytes in various electrochemical devices.     

Hydrogen/oxygen polymer electrolyte membrane fuel cells (PEMFCs) based on alkaline-doped polybenzimidazole (PBI)

When complexed with alkaline such as potassium hydroxide, sodium hydroxide or lithium hydroxide, films (40 μm thick) of polybenzimidazole (PBI) show conductivity in the 5 × 10⁻⁵–10⁻¹ S/cm⁻¹ range, depending on the type of alkali, the time of immersion in the corresponding base bath and the temperature of immersion. It has been shown that PBI has a remarkable capacity to concentrate KOH, even in an alkaline bath of concentration 3 M. The highest conductivity of KOH-doped PBI (9×10⁻² S cm⁻¹) at 25°C obtained in this work is higher than the we had obtained previously as optimum values for H₂SO₄-doped PBI (5 × 10⁻² S cm⁻¹ at 25°C) and H₃PO₄-doped PBI ( 2 × 10⁻³ S cm⁻¹ at 25°C). PEMFCs based on an alkali-doped PBI membrane were demonstrated, and their characteristics exhibited the same performance as those of PEMFCs based on Nafion® 117. Their development is currently under active investigation.     

In situ quantification of electrochemical dissolution of hafnium-tantalum alloys in acidic media

A thin film hafnium-tantalum combinatorial library with a compositional spread of over 70 at.% was used for electrochemical dissolution experiments in nitric acid. Surface microstructure analysis and crystallographic characterization of individual Hf–Ta alloys confirmed a hexagonal to tetragonal transition from pure Hf to pure Ta accompanied by a change in the surface grain structure. A flow-type scanning droplet cell microscope coupled to downstream analytics was used for the quantification of Hf and Ta dissolution rates along the entire compositional spread. Potentiostatically applying 3 V vs. SHE for 120 s for an electrolyte flow of 0.46 ml min^− 1 resulted in dissolution rates of pure Hf and pure Ta in the ng s^− 1 cm^− 2 and pg s^− 1 cm^− 2 range, respectively. For both species, the average dissolution rate was independent of the compositional gradient, indicating a dissolution enhancement of minor species. A decrease in their activation energy for dissolution triggered by a surface energy modification was the reason for the observed behavior.     

Titanium vanadium nitride electrode for micro-supercapacitors

Here we report on the synthesis of binary transition metal nitride electrodes based on titanium vanadium nitride (TiVN) thin films. These films were deposited by a method compatible with micro-electronic processes which consists of DC co-sputtering of vanadium (V) and titanium (Ti) targets. TiVN films with different Ti/V ratio were deposited. A dependence of the capacitance and the cycling stability with the Ti/V atomic ratio in the films was established. While V rich sample exhibits a Faradic behavior that limits its cycling ability despite a high areal and volumetric capacity, the addition of Ti in the film drastically improves the cycling ability with virtually no fade in capacitance after 10,000 cycles. Furthermore, a 1.1 Ti/V ratio leads to an areal capacitance up to 15 mF·cm^− 2 in 1 M KOH electrolyte solution. Such electrodes shed light on the use of binary transition metal nitrides as candidate electrodes for micro-supercapacitor.     

Preparation of monodisperse carbon nanospheres for electrochemical capacitors

The efficiently hydrothermal route using sucrose without any catalysts is employed to prepare the uniform carbon spheres. The monodisperse 100–150 nm carbon spheres are obtained with the activation treatment in molten KOH. The carbon spheres are characterized by transmission electron microscope, X-ray diffraction, N₂ adsorption, Raman spectroscopy and electrochemical techniques. The relationships of specific capacitance and surface properties of carbon spheres are investigated. A single electrode of carbon nanosphere materials performs excellent specific capacitance (328 F g⁻¹), area capacitance (19.2 μF cm⁻²) and volumetric capacitance (383 F cm⁻³).     

Platinum nanoparticles supported on nitrobenzene-functionalised graphene nanosheets as electrocatalysts for oxygen reduction reaction in alkaline media

A systematic study on the electrocatalytic properties of Pt nanoparticles supported on nitrobenzene-modified graphene (Pt-NB/G) as catalyst for oxygen reduction reaction (ORR) in alkaline solution was performed. Graphene nanosheets were spontaneously grafted with nitrophenyl groups using 4-nitrobenzenediazonium salt. The electrocatalytic activity towards the ORR and stability of the prepared catalysts in 0.1 M KOH solution have been studied and compared with that of the commercial Pt/C catalyst. The results obtained show that the NB-modified graphene nanosheets can be good Pt catalyst support with high stability and excellent electrocatalytic properties. The specific activity of Pt-NB/G for O₂ reduction was 0.184 mA cm⁻², which is very close to that obtained for commercial 20 wt% Pt/C catalyst (0.214 mA cm⁻²) at 0.9 V vs. RHE. The Pt-NB/G hybrid material promotes a four-electron reduction of oxygen and can be used as a promising cathode catalyst in alkaline fuel cells.     

Strong anion receptor-assisted boron-based Mg electrolyte with wide electrochemical window and non-nucleophilic characteristic

Herein we present a strong anion receptor-assisted Mg-ion electrolyte, which is synthesized from tris(2H-hexafluoroisopropyl) borate (THFPB) and MgO in 1,2-dimethoxyethane (DME). The as-prepared borate magnesium oxide complex (BMOC) electrolyte delivers exceptional electrochemical performances, including extremely high anodic stability (up to 4.2 V vs. Mg), non-corrosivity to stainless steel and aluminium foils, and reasonable ionic conductivity of 1.74 × 10^− 4 S cm^− 1. In addition, by virtue of the non-nucleophilic characteristic of the BMOC electrolyte, S ||BMOC ||Mg cells have been assembled, which show a high stable discharge capacity of 1030 mAh g^− 1 for 15 cycles and one well-defined voltage plateau of ≈ 1.1 V vs. Mg, yielding a desirable energy density beyond 1100 Wh kg^− 1 based on the weight of sulfur in cathodes.     

Nonenzymatic glucose fuel cells with an anion exchange membrane as an electrolyte

Nonenzymatic glucose fuel cells were prepared by using a polymer electrolyte membrane and Pt-based metal catalysts. A fuel cell with a cation exchange membrane (CEM), which is often used for conventional polymer electrolyte fuel cells, shows an open circuit voltage (OCV) of 0.86 V and a maximum power density (P_max) of 1.5 mW cm^?2 with 0.5 M d-glucose and humidified O₂ at room temperature. The performance significantly increased to show an OCV of 0.97 V and P_max of 20 mW cm^?2 with 0.5 M d-glucose in 0.5 M KOH solution when the electrolyte membrane was changed from a CEM to an anion exchange membrane (AEM). This is due to the superior catalytic activity for both glucose oxidation and oxygen reduction in alkaline medium than in acidic medium. The anodic reaction of the fuel cell can be estimated to be the oxidation of glucose to gluconic acid via a two-electron process under these experimental conditions. The crossover of glucose through an electrolyte membrane was negligibly small compared with methanol and may not represent a serious technical problem due to the cross-reaction.     

Plastic–polymer composite electrolytes: Novel soft matter electrolytes for rechargeable lithium batteries

We present here a soft matter solid composite electrolyte obtained by inclusion of a polymer in a semi-solid organic plastic lithium salt electrolyte. Compared to lithium bis-trifluoromethanesulfonimide-succinonitrile (LiTFSI-SN), the (100 − x)%-[LiTFSI-SN]: x%-P (P: polyacrylonitrile (PAN), polyethylene oxide (PEO), polyethylene glycol dimethyl ether (PEG)) composites possess higher ambient temperature ionic conductivity, higher mechanical strength and wider electrochemical window. At 25 °C, ionic conductivity of 95%-[0.4 M LiTFSI-SN]: 5%-PAN was 1.3 × 10⁻³ Ω⁻¹ cm⁻¹ which was twice that of LiTFSI-SN. The Young’s modulus (Y) increased from Y → 0 for LiTFSI-SN to a maximum ∼1.0 MPa for (100 − x)%-[0.4 M LiTFSI-SN]: x%-PAN samples. The electrochemical voltage window for composites was approximately 5 V (Li/Li⁺). Excellent galvanostatic charge/discharge cycling performance was obtained with composite electrolytes in Li|LiFePO₄ cells without any separator.     

Surface modified Pt/C as a methanol tolerant oxygen reduction catalyst for direct methanol fuel cells

A new procedure has been successfully developed by which PtN_x/C is synthesized to enhance methanol tolerance while maintaining a high catalytic activity for the oxygen-reduction reaction (ORR). The nitrogen-modified Pt surface, which is prepared using a chelating agent followed by heat treatment, exhibits considerable selectivity toward the ORR in the presence of methanol. The high methanol tolerance could be attributed to the suppression of methanol adsorption resulting from the modification of the Pt surface with nitrogen. A direct methanol fuel-cell (DMFC) test showed that a power density of up to 120 m W cm⁻² was generated when PtN_x/C was used as the cathode catalyst (1 mg cm⁻²) in 6 M methanol and oxygen at 70 °C.     

Construction of a universal model for non-invasive identification of penicillins for injection using near-infrared diffuse reflectance spectroscopy

A universal NIR model for identification of 24 types of penicillins for injection has been developed. A total of 194 batches of 24 products from 87 manufacturers in China were used in the study. The classification model is a principal component analysis (PCA) based model consisting of a primary identification library with four sub-libraries. The spectral frequency regions used were 6000–6400 cm⁻¹ and 8400–8900 cm⁻¹ in the main library, 6000–6800 cm⁻¹ in sub-library 1, 4100–12,000 cm⁻¹ in sub-libraries 2 and 3, and 6200–6400 cm⁻¹ and 4700–5000 cm⁻¹ in sub-library 4. The data preprocessing method is the first derivative with nine-point smoothing followed by vector normalization. The distances between spectra were calculated using factors 2–5 for the primary identification library, factors 4–7 for sub-library 1, and factor 2 for sub-libraries 2–4. The specificity of the model was validated, and it had a correct identification rate of approximately 99%. This study has not only confirmed, but also improved the strategy described in our early report (Chong et al. (2009) [11]) to build such a library for the identification of different medicines by NIR.     

Outstanding room-temperature capacitance of biomass-derived microporous carbons in ionic liquid electrolyte

A remarkable capacitance of 180 F·g^− 1 (at 5 mV·s^− 1) in solvent-free room-temperature ionic liquid electrolyte, 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide, was achieved in symmetric supercapacitors using microporous carbons with a specific surface area of ca. 2000 m²·g^− 1 calculated from gas sorption by the 2D-NLDFT method. The efficient capacitive charge storage was ascribed to textural properties: unlike most activated carbons, high specific surface area was made accessible to the bulky ions of the ionic liquid electrolyte thanks to micropores (1–2 nm) enabled by fine-tuning chemical activation. From the industrial perspective, a high volumetric capacitance of ca. 80 F·cm^− 3 was reached in neat ionic liquid due to the absence of mesopores. The use of microporous carbons from biomass waste represents an important advantage for large-scale production of high energy density supercapacitors.     

Microstructural modifications in swift ion irradiated PET

Polyethylene terephthalte (PET) was irradiated with carbon (70 MeV) and copper (120 MeV) ions to analyze the induced modifications with respect to optical, structural and thermal properties. In the present investigation, the fluence for carbon irradiation was varied from 1×10¹¹ to 1×10¹⁴ ions cm⁻², while that for copper beam was kept in the range of 1×10¹¹ to 1×10¹³ ions cm⁻². UV–vis, FTIR, XRD and DSC techniques were utilized to study the induced changes. The analysis of UV–vis absorption studies reveals that there is decrease of optical energy gap up to 10% on carbon ion irradiation (at 1×10¹⁴ ions cm⁻²), whereas the copper beam (at 1×10¹³ ions cm⁻²) leads to a decrease of 49%. FTIR analysis indicated the formation of alkyne end groups along with the overall degradation of polymer with copper ion irradiation. X-ray diffraction analysis revealed that the semi-crystalline PET losses its crystallinity on swift ion irradiation. It was found that the carbon beam (1×10¹⁴ ions cm⁻²) decreased the crystallite size by 16% whereas this decrease is of 12% in case of the copper ion irradiated PET at 1×10¹³ ions cm⁻². The loss in crystallinity on irradiation has been supported by DSC thermograms.     

Vibrational spectroscopic study of syngenite formed during the treatment of liquid manure with sulphuric acid

Syngenite (K₂Ca(SO₄)₂·H₂O), formed during treatment of manure with sulphuric acid, was studied by infrared, near-infrared (NIR) and Raman spectroscopy. C_s site symmetry was determined for the two sulphate groups in syngenite (P2₁/m), so all bands are both infrared and Raman active. The split ν₁ (two Raman+two infrared bands) was observed at 981 and 1000 cm⁻¹. The split ν₂ (four Raman+four infrared bands) was observed in the Raman spectrum at 424, 441, 471 and 491 cm⁻¹. In the infrared spectrum, only one band was observed at 439 cm⁻¹. From the split ν₃ (six Raman+six infrared) bands three 298 K Raman bands were observed at 1117, 1138 and 1166 cm⁻¹. Cooling to 77 K resulted in four bands at 1119, 1136, 1144 and 1167 cm⁻¹. In the infrared spectrum, five bands were observed at 1110, 1125, 1136, 1148 and 1193 cm⁻¹. From the split ν₄ (six infrared+six Raman bands) four bands were observed in the infrared spectrum at 604, 617, 644 and 657 cm⁻¹. The 298 K Raman spectrum showed one band at 641 cm⁻¹, while at 77 K four bands were observed at 607, 621, 634 and 643 cm⁻¹. Crystal water is observed in the infrared spectrum by the OH-liberation mode at 754 cm⁻¹, OH-bending mode at 1631 cm⁻¹, OH-stretching modes at 3248 (symmetric) and 3377 cm⁻¹ (antisymmetric) and a combination band at 3510 cm⁻¹ of the H-bonded OH-mode plus the OH-stretching mode. The near-infrared spectrum gave information about the crystal water resulting in overtone and combination bands of OH-liberation, OH-bending and OH-stretching modes.