The effect of surface stress on the propagation of Lamb waves

This work investigates the possibility of the propagation of Lamb waves in thin solid layers with external traction free surfaces, in the presence of surface elasticity, inertia and residual stress. It is demonstrated that such waves do exist and that their characteristics can be quite different from their classical counterparts. The governing equations with non-classical boundary conditions involving the bulk and surface stress are solved exactly in the frequency-wavenumber domain. This solution is utilized to compute the Lamb wave modes for different layer thicknesses. An efficient strategy to capture all the modes of Lamb waves within a given frequency window is outlined. It is shown that the effect of surface elasticity and inertia becomes significant with increasing frequency and decreasing layer thickness, where the number of modes participating within a given frequency window is more than that permitted by the classical theory. Further, it is observed that the nature of the Lamb wave modes (in terms of negative dispersion) in the presence of surface stress is similar to what predicted by the nonlocal theory and microstructure based continuum theory.     

Properties of surface waves in granular media under gravity

Acoustical waves propagating along the free surface of granular media under gravity are investigated in the framework of elasticity theory. The influence of stress on a surface wave is analyzed. The results have shown that two types of surface waves, namely sagittal and transverse modes exist depending on initial stress states, which may have some influence on the dispersion relations of surface waves, but the influence is not great. Considering that the present experimental accuracy is far from distinguishing this detail, the validity of elasticity theory on the surface waves propagating in granular media can still be maintained.     

Modeling and simulating of V-shaped piezoelectric micro-cantilevers using MCS theory considering the various surface geometries

Atomic force microscopy (AFM) is widely used as a tool in studying surfaces and mechanical properties of materials at nanoscale. This paper deals with mechanical and vibration analysis of AFM vibration in the non-contact and tapping modes for V-shaped piezoelectric micro-cantilever (MC) with geometric discontinuities and cross section variation in the air ambient. In the vibration analysis, Euler-Bernoulli beam theory based on modified couple stress (MCS) theory has been used. The governing equation of motion has been derived by using Hamilton's principle. By adopting finite element method (FEM), the MC differential equation has been solved. Damping matrix was considered in the modal space. Frequency response was obtained by using Laplace transform, and it has been compared with experimental results. Newmark algorithm has been used based on constant average acceleration to analyze time response of MC, and then time response results in the vibration mode, far from the sample surface have been compared with experimental data. In vicinity of sample surface, MC is influenced by various nonlinear forces between the probe tip and sample surface, including van der Waals, contact, and capillary forces. Time response was examined at different distances between MC base and sample surface, and the best distance was selected for topography. Topography results of different types of roughness showed that piezoelectric MC has been improved in the air ambient. Topography showed more accurate forms of roughness, when MC passes through sample surface at higher frequencies. The surface topography investigation for tapping and non-contact modes showed that using of these two modes are suitable for topography.     

Free vibration of a single-walled carbon nanotube containing a fluid flow using the Timoshenko beam model

The flexural vibration of the fluid-conveying single-walled carbon nanotube (SWCNT) is derived by the Timoshenko beam model, including rotary inertia and transverse shear deformation. The effects of the flow velocity and the aspect ratio of length to diameter on the vibration frequency and mode shape of the SWCNT are analyzed. Results show that the effects of rotary inertia and transverse shear deformation result in a reduction of the vibration frequencies, especially for higher modes of vibration and short nanotubes. The frequency is also compared with the previous study based on Euler beam model. In addition, if the ratio of length to diameter increased to 60, the influence of the shear deformation and rotary inertia on the mode shape and the resonant frequencies can be neglected. However, the influence is very obvious when the ratio decreased to 20. As the flow velocity of the fluid increases in the vicinity of 2π, the SWCNT reveals the divergence instability. It regains stability when the flow velocity reaches about 9. As the velocity increases further, the SWCNT undergoes a coupled-mode flutter and results in a larger amplitude.     

Vibration analysis of scanning thermal microscope probe nanomachining using Timoshenko beam theory

In this paper, the effect of thermal vibration on the resonant frequency of transverse vibration of scanning thermal microscope (SThM) cantilever probe is analyzed using the Timoshenko beam theory, including the effects of rotary inertia and shear deformation. The thermal vibration effect can be considered as an axial force and is dependent of temperature distribution of the probe. In this analysis, the temperature is assumed to be distributed in accordance with the constant, linear, and quadratic models along the probe length. The Rayleigh–Ritz method is used to solve the vibration problem of the probe. The numerical results show that the frequency obtained with the constant model is the highest, while it is the lowest for the quadratic model. The frequency of vibration modes of the probe increases with increasing the temperature of the probe. As the ratio of probe length to its thickness increases, the frequency of vibration modes decreases. In addition, the effects of rotary inertia and shear deformation on the frequency are significant, especially in higher order modes and smaller values of the ratio of the probe length to its thickness.     

Nonlinear effects in trapped modes of standing waves on the surface of shallow water

It was shown that traveling waves may coexist with standing waves in a planar infinitely long channel filled by ideal liquid with a free surface. The standing waves are localized near a dynamic inclusion—a massive die on an elastic base. The amplitude of the traveling waves may be turned to zero by appropriately selecting the vibration frequency of the die. The standing waves arise because the vibration eigenfrequencies have a mixed spectrum; that is, the discrete and continuous spectra superpose. Nonlinear effects were observed for the first time when standing waves form in shallow water. In particular, a relationship between the die weight necessary to excite trapped modes, die dimensions, and vibration frequency was derived. It was shown that the nonlinear effects cause double-frequency traveling waves with amplitudes of the next order of smallness. These traveling waves vanish if the die geometry is properly chosen, as for the waves of the zeroth order.     

惯性对多孔金属材料动态力学行为的影响

 对泡沫金属材料的力学性能已经进行了十分广泛的研究,但在对泡沫金属的应变率效应和惯性效应的研究中,尚存在一些矛盾的结论。为进一步认清惯性在多孔金属动态响应中的作用,用有限元计算方法模拟了二维Voronoi蜂窝的动态压缩行为,得到了不同速度下Voronoi蜂窝的3种变形模式。通过改变基体材料的密度和冲击速度进行“数值实验”,得到了相应“试件”的由冲击面和支撑面得到的宏观平均应力应变曲线和平台应力。根据数值模拟的结果,着重分析了惯性效应的影响。研究发现,惯性并不影响蜂窝的应力应变曲线,但它导致试件中宏观变形不均匀,是平台应力提高的主要原因。     

Radial vibration of ultra-small nanoparticles with surface effects

An elastic model to predict radial vibration of ultra-small nanoparticles is proposed and the main reason of frequency shifts (comparing with classical elastic model) in ultra-small nanoparticles is interpreted. Taking the curvature-dependent surface theory into account, the effects of surface on the radial vibrations of nanoparticles are investigated with our new model. Both the atomic and the present models are calculated and their results agree well. It argues that the surface effects are remarkable on the radial vibrations of ultra-small nanoparticles and surface elasticity plays the main role rather than surface stress which is the previous understanding. The curvature-dependence of surface effects cannot be ignored when the particle is small enough. For the low-order radial vibration, the surface effects are more noteworthy.     

Resonance frequency of chiral single-walled carbon nanotubes using Timoshenko beam theory

This Letter develops a model that analyzes the resonant frequency of the chiral single-walled carbon nanotubes (SWCNTs) subjected to a thermal vibration by using Timoshenko beam model, including the effect of rotary inertia and shear deformation. The analytical solution is derived and the frequency equation is obtained. The results based on the beam model show that the frequency increases with decreasing the nanotube aspect ratio of length to diameter. In addition, the frequency obtained by Timoshenko beam model is lower than that calculated by Euler beam model. As the nanotube aspect ratio of length to diameter decreased, the discrepancy is more obvious. Furthermore, as the effect of thermal vibration increases, the frequency for chiral SWCNTs decreases.     

Modeling of a nanoscale flexoelectric energy harvester with surface effects

This work presents the modeling of a beam energy harvester scavenging energy from ambient vibration based on the phenomenon of flexoelectricity. By considering surface elasticity, residual surface stress, surface piezoelectricity and bulk flexoelectricity, a modified Euler-Bernoulli beam model for the energy harvester is developed. After deriving the requisite energy expressions, the extended Hamilton's principle and the assumed-modes method are employed to obtain the discrete electromechanical Euler-Lagrange's equations. Then, the expressions of the steady-state electromechanical responses are given for harmonic base excitation. Numerical simulations are conducted to show the output voltage and the output power of the flexoelectric energy harvesters with different materials and sizes. Particular emphasis is given to the surface effects on the performance of the energy harvesters. It is found that the surface effects are sensitive to the beam geometries and the surface material constants, and the effect of residual surface stress is more significant than that of the surface elasticity and the surface piezoelectricity. The axial deformation of the beam is also considered in the model to account for the electromechanical coupling due to piezoelectricity, and results indicate that piezoelectricity will diminish the output electrical quantities for the case investigated. This work could lead to the development of flexoelectric energy harvesters that can make the micro- and nanoscale sensor systems autonomous.     

Modeling of surface stress effects on bending behavior of nanowires: Incremental deformation theory

The surface stress effects on bending behavior of nanowires have recently attracted a lot of attention. In this letter, the incremental deformation theory is first applied to study the surface stress effects upon the bending behavior of the nanowires. Different from other linear continuum approaches, the local geometrical nonlinearity of the Lagrangian strain is considered, therefore, the contribution of the surface stresses is naturally derived by applying the Hamilton's principle, and influence of the surface stresses along all surfaces of the nanowires is captured. It is first shown that the surface stresses along all surfaces have contribution not only on the effective Young's modulus of the nanowires but also on the loading term in the governing equation. The predictions of the effective Young's modulus and the resonance shift of the nanowires from the current method are compared with those from the experimental measurement and other existing approaches. The difference with other models is discussed. Finally, based on the current theory, the resonant shift predictions by using both the modified Euler-Bernoulli beam and the modified Timoshenko beam theories of the nanowires are investigated and compared. It is noticed that the higher vibration modes are less sensitive to the surface stresses than the lower vibration modes.     

Longitudinal vibration and stability analysis of carbon nanotubes conveying viscous fluid

Nowadays, carbon nanotubes (CNT) play an important role in practical applications in fluidic devices. To this end, researchers have studied various aspects of vibration analysis of a behavior of CNT conveying fluid. In this paper, based on nonlocal elasticity theory, single-walled carbon nanotube (SWCNT) is simulated. To investigate and analyze the effect of internal fluid flow on the longitudinal vibration and stability of SWCNT, the equation of motion for longitudinal vibration is obtained by using Navier-Stokes equations. In the governing equation of motion, the interaction of fluid-structure, dynamic and fluid flow velocity along the axial coordinate of the nanotube and the nano-scale effect of the structure are considered. To solve the nonlocal longitudinal vibration equation, the approximate Galerkin method is employed and appropriate simply supported boundary conditions are applied. The results show that the axial vibrations of the nanotubesstrongly depend on the small-size effect. In addition, the fluid flowing in nanotube causes a decrease in the natural frequency of the system. It is obvious that the system natural frequencies reach zero at lower critical flow velocities as the wave number increases. Moreover, the critical flow velocity decreases as the nonlocal parameter increases.     

Elastic behavior of a screw dislocation in the wall of a hollow nanotube

The elastic behavior of a screw dislocation lying in the wall of a hollow cylindrical nanotube is studied theoretically. The corresponding boundary-value problem of the classical theory of elasticity is formulated and solved (for stresses) for a linear elastically isotropic or transversely isotropic body. The elastic energy of the nanotube with the dislocation and the image force exerted on this dislocation by the inner and outer nanotube surfaces are calculated. The internal space of the nanotube is shown to cause the following qualitative differences in the dislocation stress-field distribution: a change in the sign of stress-tensor components near the inner nanotube surface, a high stress concentration at this surface, and a strong stress gradient at this surface. The dislocation has only one position of unstable equilibrium in the nanotube wall, which is always shifted toward the inner nanotube surface. As the internal-space radius increases, the dislocation energy decreases and the position of its equilibrium shifts toward the outer nanotube surface; in the limiting case of a flat plate, it reaches the center of the plate. Near the nanotube free surfaces, the image force on the dislocation is large and can substantially affect the dislocation behavior.     

Effect of surface layer thickness on buckling and vibration of nonlocal nanowires

In this Letter, the buckling and vibration behavior of nonlocal nanowires by incorporating surface elasticity is investigated. A modified core–shell model is developed to depict the size effect of Youngʼs modulus and validated by the reported experimental data. Our results show that the buckling load and natural frequency of nanowires increase when the effect of surface layer thickness is taken into account. Moreover, as the diameter of nanowires is smaller than 50 nm, the influence of surface layer thickness becomes obvious. This work can be helpful in characterizing and predicting the buckling and vibration behavior of NWs.     

低频内耗测量时标准滞弹性固体的内耗行为

用三参量力学模型的恒应力和恒应变弛豫时间描述了标准滞弹性固体的内耗行为.在低频内耗测量时,振动系统的惯量不可避免地影响测量的内耗值,当材料的内耗较大和测量频率与振动系统的共振频率可以比较时,惯量对内耗测量的影响较大,这时惯量的影响不可忽略. 关键词：     

A finite element analysis for the vibration modes of a bladed disc

The coupled vibration modes of a rotating blade-disc system are calculated by a finite element method. It is assumed that a large number of identical blades are present, such that the resulting blade loadings on the disc can be considered continuously distributed around the rim of the disc. The disc may have arbitrary profile, and the blades may be tapered and twisted, thus closely representing practical axial flow turbomachine configurations. The effects of rotation, thermal stress, and transverse shear and rotatory inertia in discs of moderately thick profile are readily incorporated into the finite element model. Calculated values of frequencies are compared with experimental data obtained on non-rotating models, and the convergence of the solution is examined by comparison with exact solutions, which can be obtained for configurations of simple geometry. Excellent agreement with experimental data is obtained when using remarkably few elements in the mathematical model, and convergence of the solution is extremely rapid.     

Vibrational analysis of double-walled carbon nanotubes with inner and outer nanotubes of different lengths

In this study, the Euler-Bernoulli beam model is used to analyze the resonant vibration of double-walled carbon nanotubes (DWCNTs) with inner and outer nanotubes of different lengths. The resonant properties of DWCNTs with different inner and outer nanotube lengths are investigated in detail using this theoretical approach. The resonant vibration is significantly affected by the vibrational modes of the DWCNTs, and by the lengths of the inner and outer nanotubes. For an inner or outer nanotube of constant length, the vibrational frequencies of the DWCNTs increase initially and then decrease as the length of another nanotube increases. A design for nanoelectromechanical devices that operate at various frequencies can be realized by controlling the length of the inner and outer nanotubes of DWCNTs. This investigation may be helpful in applications of carbon nanotubes such as high frequency oscillators, dynamic mechanical analysis and mechanical sensors.     

串联磁镜捕获粒子模的宏观模型

本文从宏观途径探讨无碰撞捕获粒子模,得到回旋动力学导出的结果,即扰动电荷分离稳定效应,塞室通行粒子增加振荡的惯性等。     

Theories of surface elasticity for nanoscale objects

The emergence of nanotechnology has driven recent interest in systems having surface atoms as a significant fraction of all atoms present, in particular nano-sheets (ultra-thin slabs), nano-wires, and nano-particles. In these systems, the bulk (i.e. non-surface region or interior) is typically strained in response to the stress of the surface. This elastic strain of the bulk in turn changes the surface lattice constants. Since the bulk and the surface are coupled, the problem must be solved self-consistently. Solving this problem requires a quantitative model of the surface elastic properties which are different from the bulk. In this paper we consider various models that have been proposed for surface elasticity. Our goal is to elucidate the relationship between two contrasting approaches: (1) the Shuttleworth equation which defines a surface stress based on the strain derivative of the surface energy and (2) the Gurtin-Murdoch (GM) theory which considers the surface layer as a membrane with residual strain and with elastic constants different from the bulk. The GM theory is analogous to the 2-D Frenkel-Kontorova (FK) model and can be used to obtain quantitative parameters for the FK model. We present an embedded atom method calculation of the surface elastic constants of Cu(1 1 1) using the GM theory with the surface represented by a membrane one atomic layer thick. This quantitative approach describes the elastic properties of surfaces in a physically appealing way. Just as the bulk elastic constants provide direct information regarding the stress/strain relationship in a bulk material, the surface elastic constants provide similar information for a surface monolayer. This theory will allow elasticity analysis and atomistic calculations of properties of nano-scale objects.