Development of n-type Te-doped GaSb substrates with low carrier concentration for FPA applications

Undoped GaSb is p-type with the residual acceptor concentration of about 1e17 cm⁻³ due to the gallium vacancies and gallium in antimony site. Counter-doping of GaSb with low level of Te can reduce the net carrier concentration resulting in higher optical transparency in a broad IR spectral range. In this work, the carrier concentration, mobility and sheet resistance of n-type and p-type Te-doped GaSb substrates were measured using Hall method at 300 K and 77 K. The Hall carrier concentration data at 300 K were correlated with the absorption coefficients of GaSb in the IR spectral range. An empirical relationship between these values was established. Based on this correlation, we discuss application of FTIR spectroscopy for non-destructive optical screening of the substrates that allows construction of the carrier concentration distribution map across GaSb wafers. Investigations of the electronic properties of the low-doped p-type and n-type GaSb substrates upon cooling down to 77 K indicate the reduction of the hole carrier concentration background for both GaSb types. This is evident from the decrease in the Hall-measured carrier concentration for p-type GaSb. For n-type GaSb, an increase in the carrier concentration is observed due to the reduction of the hole carrier concentration background.     

Transparent CdO/n-GaN(0001) heterojunction for optoelectronic applications

Undoped CdO films were prepared by sol–gel method. Transparent heterojunction diodes were fabricated by depositing n-type CdO films on the n-type GaN (0001) substrate. Current–voltage (I–V) measurements of the device were evaluated, and the results indicated a non-ideal rectifying characteristic with I_F/I_R value as high as 1.17×10³ at 2 V, low leakage current of 4.88×10⁻⁶ A and a turn-on voltage of about 0.7 V. From the optical data, the optical band gaps for the CdO film and GaN were calculated to be 2.30 eV and 3.309 eV, respectively. It is evaluated that interband transition in the film is provided by the direct allowed transition. The n-GaN (0001)/CdO heterojunction device has an optical transmission of 50–70% from 500 nm to 800 nm wavelength range.     

Arguments for p-type Si 1 − xGe x/Si quantum well photodetectors for the far- and very-far (terahertz)-infrared

An analysis, by a carrier scattering approach, of the thermionic emission contribution to the dark current is carried out in conventional bound-to-continuum quantum well infrared photodetectors (QWIPs). It is found that the thermionic emission increases with increasing temperature or when extending the detection wavelength from mid- to far-infrared. Considering p-type instead of n-type material, however, the increased effective mass decreases the thermionic emission. Designs for mid- and far-infrared p-type QWIPs based on the Si _1 − xGe _x/Si system are discussed for both normal and non-normal incident geometries.     

Ferromagnetism in Zn1−xCrxTe (x = 0.05, 0.15) films grown on GaAs(1 0 0) substrate

Zn_1−xCr_xTe (x = 0.05, 0.15) films were grown on GaAs(1 0 0) substrate by thermal evaporation method. X-ray diffraction analysis showed the presence of ZnCrTe phase without any secondary phase. The surface was analyzed by high resolution magnetic force microscope and profile measurements showed orientation of magnetic domains in the range of 0.5–2 nm with increase of Cr content. Magnetic moment–magnetic field measurements showed a characteristic hysteresis loop even at room temperature. The Curie temperature was estimated to be greater than 300 K. From the electron spin resonance spectra, the valence state of Cr in ZnTe was found to be +2 with d² electronic configuration. Hall effect study was done at room temperature and the result showed the presence of p-type charge carriers and hole concentration was found to increase from 5.95 × 10¹² to 6.7 × 10¹² m⁻³ when Cr content increases. We deduce the origin of ferromagnetic behavior based on the observed experimental results.     

Influence of the p-type doping on the radiometric performances of MWIR InAs/GaSb superlattice photodiodes

In this paper, quantum efficiency (QE) measurements performed on type-II InAs/GaSb superlattice (T2SL) photodiodes operating in the mid-wavelength infrared domain, are reported. Several comparisons were made in order to determine the SL structure showing optimum radiometric performances: same InAs-rich SL structure with different active zone thicknesses (from 0.5 μm to 4 μm) and different active zone doping (n-type versus p-type), same 1 μm thick p-type active zone doping with different SL designs (InAs-rich versus GaSb-rich and symmetric SL structures). Best result was obtained for the p-type doped InAs-rich SL photodiode, with a 4 μm active zone thickness, showing a QE that reaches 61% at λ = 2 μm and 0 V bias voltage.     

Tuneability of Sm(1 − x)CexFeO3 ± λ perovskites: Thermal stability and electrical conductivity

Trimetallic perovskite oxides, Sm_(1 ? x)Ce_xFeO_3 ± λ (x = 0–0.05), were prepared by thermal decomposition of amorphous citrate precursors followed by calcinations. The material properties of the substituted perovskites were characterized by X-ray diffraction (XRD), X-ray florescence spectroscopy (XRF), scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS). The doped materials exhibited a single perovskite phase in air up to 1350 °C and have specific surface areas in the range of 2.696–8.665 m²/g. In reducing atmosphere (5%v/vH₂/N₂), the unsubstituted perovskite (x = 0) decomposed into two phases while the ceria stabilized materials (x = 0.01, x = 0.03, x = 0.05) remained in a single phase as revealed by XRD analysis. Their conductivities were measured by the four point probe method in air and in dilute hydrogen (5%v/vH₂/N₂) separately. The ceria substituted materials show increased stability versus reduction and phase separation for a wide temperature range (up to 1000 °C). Although undoped SmFeO₃ has higher conductivity under oxidizing conditions than ceria doped SmFeO₃ due its p-type nature, the situation is reversed under reducing conditions. The ceria substituted perovskites (Sm_(1 ? x)Ce_xFeO_3 ± λ, x = 0–0.05) showed higher conductivity in reducing than in oxidizing conditions, suggesting that ceria doping at the A-site has changed the SmFeO₃ from p-type to n-type semi-conducting behavior.     

Ab initio determination of atomic structure and energy of surface states of bare and hydrogen covered GaN (0001) surface — Existence of the Surface States Stark Effect (SSSE)

Density Functional Theory (DFT) calculations indicate that energetically stable structure of clean GaN(0001) surface posses (2 × 1) reconstruction, having every second row of Ga located near plane of N atoms, that gives rise to Ga-related dispersionless surface electronic state, already identified by angle resolved photoelectron spectroscopy (ARPES) measurements [S.S. Dhesi et al. Phys. Rev. B 56 (1997) 10271, L. Plucinski et al. Surf. Sci 507-10 (2002) 223, S. M. Widstrand et al. Surf. Sci. 584 (2005) 169]. The energy reduction in reconstruction proceeds via change of the hybridization of the occupied Ga surface states from sp³ to sp², transforming the empty states to p_z type. It is also shown that the electric subsurface field, modeled in new slab model which allows to simulate electric fields at the semiconductor surfaces [P. Kempisty et al., J. Appl. Phys. 106 (2009) 054901], strongly affects the energy of electronic states of GaN(0001) surfaces. The change of the field may shift the energy of surface states of bare and hydrogen covered GaN(0001) surface, by several eV with respect to the band states. The phenomenon, denoted as Surface States Stark Effect (SSSE), explains various band bending values, measured at differently doped n-type GaN(0001) surfaces. It is shown also that, for the adsorbate density up to one H atom for each Ga surface atom i.e. 1 monolayer coverage (1 ML), the hydrogen adatoms are located at the on-top positions, i.e. directly above Ga atoms. For these adsorbate densities, the H-related quantum surface state is located slightly below the valence band maximum (VBM) in the case of p-type GaN surface. For n-type GaN, the H-related surface state is located deeply in the valence band, about 2 eV below VBM. For higher, 1.25 ML hydrogen coverage, the two H adatoms create either surface attached H₂ ad-molecule (energetically stable) or triple bridge configuration is created (metastable). The H₂ ad-molecule is weekly attached to the surface, having the desorption energy barrier equal to 0.16 eV. For 1.25 ML coverage the DFT results were obtained for p-type GaN only. They show that in the ad-molecule case, a new surface electronic state arises which is located about 6.7 eV below VBM. In the case of the bridge configuration, the bridge related surface state is located closely to the conduction band minimum (CBM).     

Water vapour solubility and conductivity study of the proton conductor BaCe(0.9 − x)ZrxY0.1O(3 − δ)

The perovskite BaCe_(0.9 ? x)Zr_xY_0.1O_(3 ? δ) has been prepared by solid state reaction at 1400 °C and conventional sintering at 1700 °C. Water uptake experiments performed between 400 and 600 °C, at a water vapour pressure of 0.02 atm, provide data on the concentration of protons incorporated in the sample. The direct current conductivity has been measured as a function of oxygen partial pressure, at a water vapour partial pressure of 0.015 atm. The total conductivity has been resolved into a p-type and an ionic component using a fitting procedure appropriate to the assumed defect model. An estimation of the protonic component was made by assuming a conductivity isotope effect between 1.4 and 1.8. The total conductivity, obtained using impedance spectroscopy has been measured as a function of temperature in the water and heavy water exchanged states. The activation energy has been found to be 0.56 eV to 0.59 eV in the water exchanged state with values 0.03 to 0.04 eV higher in the heavy water exchanged state. Impedance spectra measured at 200 °C showed a reduction in grain boundary resistivity with increasing cerium content. The stability of the compounds to carbon dioxide has been studied by thermogravimetry.     

Behavior of silver substitution in single-grain TSMG YBCO bulk superconductor

Ag concentration in the single-grain TSMG Y₁Ba₂(Cu_1?xAg_x)₃O₇ bulk superconductor with nominal Ag concentration for x = 0.05 was measured by WDX microprobe. The partition coefficient of Ag between Y123 crystal and the melt, k_Ag, was estimated to be k_Ag = 0.1. It is also shown that the solubility of Ag in the Y₂BaCuO₅ phase is below the WDX detection limit. As the measured Ag concentration is about four times higher than the concentration of Ag for optimum chemical pinning, the clustering of Ag atoms is supposed and a mechanism of Ag clustering is proposed.     

Oxygen species on the silver surface oxidized by MW-discharge: Study by photoelectron spectroscopy and DFT model calculations

A polycrystalline silver surface has been studied by synchrotron radiation photoelectron spectroscopy after deep oxidation by microwave discharge in an O₂ atmosphere. Oxidized structures with high oxygen content, AgO_x with x > 1, have been found on the silver surface after oxidation at 300–400 K. The line shapes observed in the O1s spectra were decomposed into five components and indicated that complex oxidized species were formed. An analysis of the oxidized structures with binding energies, Е_b(O1s), greater than 530 eV pointed to the presence of both Ag–O and O–O bonds. We have carried out a detailed experimental study of the valence band spectra in a wide spectral range (up to 35 eV), which has allowed us to register the multicomponent structure of spectra below Ag4d band. These features were assigned to the formation of Ag–O and O–O bonds composed of molecular (associative) oxygen species. DFT model calculations showed that saturation of the defect oxidized silver surface with oxygen leads to the formation of associative oxygen species, such as superoxides, with electrophilic properties and covalent bonding. The high stability of oxygen-rich silver structures, AgO_x, can be explained by the formation of small silver particles during the intensive MW oxidation, which can stabilize such oxygen species.     

Photoelectron spectroscopy study of irradiation damage and metal–sulfur bonds of thiol on silver and copper surfaces

Self-assembled 1-dodecanethiol monolayers (SAMs) on silver and copper surfaces have been characterized with X-ray photoelectron spectroscopy (XPS) using both the synchrotron radiation and conventional Mg Kα excitation. Irradiation-induced changes in thiolate SAMs on Cu and Ag were observed. The identification of the sulfur species has been done. Results obtained confirm earlier studies of n-alkanethiols on silver. On copper (C₁₂S/Cu), the observed S 2p spectrum is quite broad but the use of different excitation energies enabled us to identify four sulfur species on the surface. A S 2p_3/2 component of copper thiolate is observed at 162.6 eV. Three more doublets (161.9 eV, 163.2 eV and 163.8 eV) have been observed to develop during irradiation and they are assigned to chemisorbed sulfur on copper, to different dialkylsulfides and to sulfur–sulfur bonding.     

Mid-infrared InAsSb-based nBn photodetectors with AlGaAsSb barrier layers – Grown on GaAs,using an interfacial misfit array,and on native GaSb

InAsSb-based nBn photodetectors were fabricated on GaAs, using the interfacial misfit (IMF) array growth mode, and on native GaSb. At −0.1 V operating bias, 200 K dark current densities of 1.4 × 10⁻⁵ A cm⁻² (on GaAs) and 4.8 × 10⁻⁶ A cm⁻² (on GaSb) were measured. At the same temperature, specific detectivity (D^*) figures of 1.2 × 10¹⁰ Jones (on GaAs) and 7.2 × 10¹⁰ Jones (on GaSb) were calculated. Arrhenius plots of the dark current densities yielded activation energies of 0.37 eV (on GaAs) and 0.42 eV (on GaSb). These values are close to the 4 K bandgap of the absorption layers (0.32–0.35 eV) indicating diffusion limited dark currents and small valence band offsets. Significantly, these devices could be used for mid-infrared focal plane arrays operating within the temperature range of cost-effective thermoelectric coolers.     

Influence of the antireflection,window, and active layers on optical properties of exponential-doping transmission-mode GaAs photocathode modules

In order to well study the influence of the thickness and doping concentration on optical properties of transmission-mode GaAs photocathode, three exponential-doping and one uniform-doping photocathode modules were prepared by molecular beam epitaxy with a structure of glass/Si₃N₄/Ga_1 ? xAl_xAs/GaAs. By use of the spectrophotometer, the optical properties were separately measured including the reflectivity and transmissivity curves. Based on thin film optical principles, the optical properties and their integral values are calculated by matrix formula for the four-layer photocathode module. The result shows that the antireflection and window layers affect the peak and valley of the optical property curves and the active layer influences the absorptivity values of the transmission-mode cathode modules. The photocathode module has high absorptivity within the response waveband when the optimal module has the Si₃N₄ antireflection layer of 0.1 μm, the Ga_1 ? xAl_xAs window layer of more than 0.4 μm, and the GaAs active layer of 1.5 μm–2 μm and low average doping concentration.     

Electron-energy-loss spectroscopy of C60 monolayer films on active and inactive surfaces

The characteristics of interaction between C₆₀ molecules and Si(1 1 1)-7×7, Ag/Si(1 1 1)-√3×√3 R30° and layered material MoS₂ surfaces have been investigated using electron-energy-loss spectroscopy (EELS). The EEL spectrum of C₆₀/Si(1 1 1)-7×7 shows a new peak at loss energy of 2.7 eV. This indicates the existence of charge transfer from the substrate to C₆₀ molecules. The EEL spectrum of a C₆₀ monolayer film grown on a cleaved surface of MoS₂ is almost the same as that of bulk C₆₀. The EEL spectrum of a C₆₀ monolayer film on an Ag/Si(1 1 1) surface is quite different from that on a clean Si(1 1 1)-7×7 surface, although the films on those substrates have the same epitaxial arrangement. Furthermore, intensities of energy-loss peaks of C₆₀/Ag/Si(1 1 1) are slightly smaller than those of C₆₀/MoS₂ in spite of having the same loss-energy. This suggests that the interaction between C₆₀ molecules and the Ag/Si(1 1 1) surface is stronger than that between C₆₀ molecules and the MoS₂ surface.     

The thermopower of transition-metal double-perovskites: A sensitive probe of their electronic structures around the Fermi level

We report on a comparative study of S(T) for a series of transition-metal double-perovskites A₂BB′O₆ (A – Ca, Sr, Ba, and B, B′ = transition metal ions), some of them known to have half-metallic ground states. For Sr₂BB′O₆ with BB′ = CrMo, CrW, CrRe, FeMo, and FeRe (ferrimagnetic with high Curie temperatures), S(T) is metallic, for B′ = Mo and W it is n-type and for B′ =  Re, p-type. For A₂FeMoO₆ (A = Ca, Sr, Ba), the crystallographic differences (monoclinic, tetragonal and cubic space-groups, respectively) are accompanied by prominent differences in their (metallic) S(T). For the insulating Sr₂MnReO₆ and Ba₂MnReO₆, the onset of ferromagnetic order below T_c ∼ 120 K is marked by a steep drop of S(T) accompanied by only a slight change in the slope of ln ρ versus 1/T^1/2. Significant conclusions were drawn from the experimental results without the need for elaborate models.     

Band structure of a cylindrical GaAs/AlxGa1 − xAs superwire

We investigate the existence of a band structure in GaAs/Al_xGa_1 − xsuperlattices with cylindrical symmetry, namely GaAs/Al_xGa_1 − xAs cylindrical superwires. These systems consists of a large number of concentric GaAs and Al_xGa_1 − xAs alternate cylindrical shells around a central GaAs cylindrical wire. Despite the radial configuration (that breaks the translational symmetry) and the electron confinement in the central three-dimensional well, a band structure can emerge depending on the number and thickness of the cylindrical shells.     

Thermal annealing of GaSb quantum dots in GaAs formed by droplet epitaxy

We investigate effects of annealing on GaSb quantum dots (QDs) formed by droplet epitaxy. Ga droplets grown on GaAs are exposed to Sb molecular beam and then annealed at T_a=340–450 °C for 1 min to form GaSb QDs. An atomic force microscope study shows that with the increase of T_a, the average diameter of dots increases by about 60%, while their density decreases to about 1/3. The photoluminescence (PL) of GaSb QDs is observed at around 1 eV only for those samples annealed above T_a=380 °C, which indicates that the annealing process plays an important role in forming high quality GaSb QDs.     

Raman scattering from confined phonons in GaAs/AlGaAs quantum wires

We report on photoluminescence and Raman scattering performed at low temperature (T =  10 K) on GaAs/Al_0.3Ga_0.7As quantum-well wires with effective wire widths ofL =  100.0 and 10.9 nm prepared by molecular beam epitaxial growth followed by holographic patterning, reactive ion etching, and anodic thinning. We find evidence for the existence of longitudinal optical phonon modes confined to the GaAs quantum wire. The observed frequency at ο_L10 =  285.6 cm⁻¹forL =  11.0 nm is in good agreement with that calculated on the basis of the dispersive dielectric continuum theory of Enderleinas applied to the GaAs/Al_0.3Ga_0.7As system. Our results indicate the high crystalline quality of the quantum-well wires fabricated using these techniques.     

Magnetic and magneto-optical properties of MnSb films on various substrates

Magnetic and magneto-optical properties of MnSb films with different crystalline orientations on various semiconductors of GaAs(1 0 0), GaAs(1 1 1)A, B, and sapphire(0 0 0 1) have been measured by a vibrating sample magnetometer (VSM) and a home-made magneto-optical Kerr effect (MOKE) system. All these samples have their easy axes in the plane and show ferromagnetic properties. Among these samples, the film on GaAs(1 1 1)B has the lowest coercive force H_c and the largest squareness (SQ) value, whereas the film on GaAs(1 0 0) shows the largest H_c and the lowest SQ value. A large Kerr rotation angle of about 0.3° was observed at a wavelength of λ=632.8 nm for the film on sapphire in the field applied both parallel and perpendicular to the film plane. However, the MnSn films on other substrates do not have an observable Kerr rotation. The dynamic effect of the hysteresis was also measured using our MOKE system. As the frequency of applied magnetic field increases, the loop rounds off at the corners and the loop area increases.     

Reduction of thin-film ceria on Pt(111) by supported Pd nanoparticles probed with resonant photoemission

Local defects present in CeO_2 ? x films result in a mixture of Ce³⁺ and Ce⁴⁺ oxidation states. Previous studies of the Ce 3d region with XPS have shown that depositing metal nanoparticles on ceria films causes further reduction, with an increase in Ce³⁺ concentration. Here, we compare the use of XPS and resonant photoemission spectroscopy (RESPES) to estimate the concentration of Ce³⁺ and Ce⁴⁺ in CeO_2 ? x films grown on Pt (111), and the variation of this concentration as a function of Pd deposition. Due to the nature of the electronic structure of CeO_2 ? x, resonant peaks are observed for the 4d–4f transitions when the photon energy matches the resonant energy; (hν = 121.0 eV) for Ce³⁺ and (hν = 124.5 eV) for Ce⁴⁺. This results in two discrete resonant photoemission peaks in valence band spectra. The ratio of the difference of these peaks with off-resonance scans gives an indication of the relative contribution of Ce³⁺. Results from RESPES indicate reduction of CeO_2 ? x on deposition of Pd, confirming earlier findings from XPS studies.