The Simultaneous Determination of Cu Ph Cd and Sb by Derivative Adsorption Chronopotentiometry

Anodic stripping voltammetry (ASV) is an effective electroanalytical technique for themeasurement of trace metal ions. But there are serious interferences due to overlappingstripping peaks and forming of intermetallic complex in complicated system. The peak ofcopper (ASV) is close to that of mercury. So the result of determination of copper is notsatisfactory. Adsorption chronopotentiometry was reported by H.Eskilsson et al i. In thismethod, instead of electrolytic accumulation of metal io…     

Determination of silver, antimony, bismuth, copper, cadmium and indium in ores, concentrates and related materials by atomic-absorption spectrophotometry after methyl isobutyl ketone extraction as iodides

Methods for determining ~ 0.2 mug g or more of silver and cadmium, ~ 0.5 mug g or more of copper and ~ 5 mug g or more of antimony, bismuth and indium in ores, concentrates and related materials are described. After sample decomposition and recovery of antimony and bismuth retained by lead and calcium sulphates, by co-precipitation with hydrous ferric oxide at pH 6.20 +/- 0.05, iron(III) is reduced to iron(II) with ascorbic acid, and antimony, bismuth, copper, cadmium and indium are separated from the remaining matrix elements by a single methyl isobutyl ketone extraction of their iodides from ~2M sulphuric acid-0.1M potassium iodide. The extract is washed with a sulphuric acid-potassium iodide solution of the same composition to remove residual iron and co-extracted zinc, and the extracted elements are stripped from the extract with 20% v v nitric acid-20% v v hydrogen peroxide. Alternatively, after the removal of lead sulphate by filtration, silver, copper, cadmium and indium can be extracted under the same conditions and stripped with 40% v v nitric acid-25% v v hydrochloric acid. The strip solutions are treated with sulphuric and perchloric acids and ultimately evaporated to dry ness. The individual elements are determined in a 24% v v hydrochloric acid medium containing 1000 mug of potassium per ml by atomic-absorption spectrophotometry with an air-acetylene flame. Tin, arsenic and molybdenum are not co-extracted under the conditions above. Results obtained for silver, antimony, bismuth and indium in some Canadian certified reference materials by these methods are compared with those obtained earlier by previously published methods.     

微波消解-电感耦合等离子体原子发射光谱(ICP-AES)法测定含铜污泥中多种重金属

为了填补现有方法的技术空白,本方法采用微波消解和电感耦合等离子体原子发射光谱法（ ICP-AES）相结合,实现对含铜污泥中铅、锌、铬、镉、砷、镁、铝、锑量的同时测定。首先采用盐酸-硝酸-氢氟酸微波消解进行样品的前处理,消解后加入高氯酸置于电热板进行除碳并赶酸,溶样效果理想,且有效避免了高温溶样对易挥发元素砷、锑的损失,整个过程安全、高效、无损。溶样后以电感耦合等离子体发射光谱法（ ICP-AES）进行测定。对含铜污泥的分解方法进行了合理选择,并对测定时的元素分析谱线及各测定元素间干扰情况等进行了讨论。该方法的加标回收率在95.31%~107.28%%,相对标准偏差（RSD）在0.31%~2.05%之间（n=7),结果表明,该方法准确度高,操作简单快捷,可同时测定多种元素,能满足批量的测定含铜污泥中铅、锌、镍、铁、镉、铬、砷、锑含量的测定要求。     

Solvent extraction of antimony(v) with ethyl acetate

A method has been derived for the selective extraction of antimony(V) from hydrochloric acid solution with ethyl acetate. The method can be employed for the rapid determination of antimony in antimonates of lead, tin, mercury, nickel and chromium and in type metal. Iron(III), cobalt(II) cadmium(II), and large amounts of copper(II) and tin(II) interfere with the extraction. For the analysis of type metal, tin must be oxidized to the tetravalent state.     

火焰原子吸收光谱法测定高锑烟尘中的银、铅、镉

建立了火焰原子吸收光谱法测定高锑烟尘中的银、铅、镉的分析方法。试样经王水、高氯酸溶解后,利用四价锑的溴化物沸点较低的性质,将锑挥发除去,以消除基体锑对测定的干扰,在盐酸-高氯酸-硫脲介质中实现了银、铅、镉的连续测定。方法检出限:Ag为0.003 7μg/mL,Pb为0.019 8μg/mL,Cd为0.001 6μg/mL。相对标准偏差(RSD,n=11):Ag为0.92%~1.04%,Pb为1.29%~2.21%,Cd为1.99%~2.22%。加标回收率:Ag为99.30%~101.8%,Pb为98.60%~102.5%,Cd为98.40%~104.0%。方法准确、可靠、简便、快速,完全适用于高锑烟尘中银、铅、镉的测定。     

电感耦合等离子体原子发射光谱法测定纯银中镉、铋、铁、铅、锑、钯、硒、碲

样品用硝酸溶解,加入过量盐酸沉淀分离银,过滤后利用电感耦合等离子体原子发射光谱法测定镉、铋、铁、铅、锑、钯、硒、碲,方法检出限分别为:0.0028,0.0075,0.0036,0.011,0.010,0.021,0.0075,0.0039μg/mL;加标回收率为98.1%～114.3%;RSD小于4.2%,方法能同时准确测定镉、铋、铁、铅、锑、钯、硒、碲,满足日常分析要求。     

The differential pulse anodic stripping voltammetry of copper and lead and their determination in EDTA extracts of soils with the mercury film glassy carbon electrode

The differential pulse anodic stripping voltammetry of copper and lead at the mercury film glassy carbon electrode is discussed. The mercury film prevents the occurrence of a monolayer stripping peak for copper. The influence of antimony and bismuth on the anodic stripping voltammetric behaviour of copper and lead is discussed. An interaction between copper and antimony distorts the copper stripping peak and gives rise to an intermediate peak. The method described is suitable for determining copper and lead simultaneously in EDTA extracts of soils.     

石墨炉原子吸收法测定土壤中铅、镉、钴、锑、铍

建立石墨炉原子吸收法测定土壤中铅、镉、钴、锑、铍含量的方法。优化了石墨炉原子吸收光谱法测定条件,在最佳实验条件下,采用硝酸-盐酸-氢氟酸-双氧水混合酸体系微波消解土壤样品,选用抗坏血酸-硝酸镁混合溶液为基体改进剂。铅、镉、钴、锑、铍的质量浓度在各自的范围内与吸光度成良好的线性关系,相关系数均大于0.999,各元素的检出限为0.008~0.06 μg/g。样品加标回收率为90.5%~104.0%,测定结果的相对标准偏差均小于2.5%(n=6)。该方法样品前处理简便,灵敏度高,检出限低,测定结果准确、可靠,可用于土壤中铅、镉、钴、锑、铍的测定。     

Spectrophotometric determination of traces of several metals in ferrous and nonferrous metals and alloys after isolation by iodide extraction

Methods are presented for the determination of traces of lead, cadmium, indium, bismuth, copper, and antimony in most of the important metals and alloys used in industry. The trace metals are isolated by hexone extraction of their iodides from 5% hydrochloric acid solution and then determined spectrophotometrically. The attractive feature of the proposed procedures is that the method used for each of the trace metals is applicable to all of the matrix metals and alloys being considered.     

Determination of antimony in impure zinc sulphate solution by coprecipitation followed by differential pulse anodic stripping voltammetry

A simple coprecipitation technique for the quantitative separation of the antimony present in impure zinc sulphate electrolyte followed by its voltammetric determination is described. Antimony in microgram levels is separated from the matrix zinc sulphate solution, which contains higher levels of copper, lead and cadmium, and is subsequently determined by differential pulse anodic stripping voltammetry (DPASV) in 3 M hydrochloric acid. Hydrous manganese dioxide is employed as the collector. This procedure, which effects considerable saving in time, is of comparable accuracy to the conventional spectrophotometric method using the antimony-rhodamine B complex. A series of synthetic zinc sulphate solutions spiked with known amounts of antimony as well as plant solutions gave near theoretical values.     

Electroanalytical performance of a Bismuth/Antimony composite glassy carbon electrode in detecting lead and cadmium

This work reports on the electroanalytical performance of a glassy carbon electrode (GCE) modified with antimony and bismuth (Sb/Bi-GCE) in detecting heavy metal ions using lead and cadmium as model analytes. The electroanalytical performance of the Sb/Bi-GCE surface was compared to the bismuth modified glassy carbon electrode (Bi-GCE) as well as the antimony modified glassy carbon electrode (Sb-GCE). The Sb/Bi-GCE exhibited excellent figures of merit compared to Bi-GCE and Sb-GCE surfaces. For example, the limit of detection for lead was 0.01 ppb using Sb/Bi-GCE and 0.1 and 1 ppb on Bi-GCE and Sb-GCE, respectively.     

恒电流吸附计时电位法的研究 Ⅱ.铜、铅的微分吸附计时电位法连测

研究了ＮＨ３／ＮＨ４Ｃｌ底液中，铜、铅与水杨基荧光酮（ＳＡＦ）形成的络合物在悬汞电极上的恒电流吸附计时电位溶出行为。讨论了富集时间，溶液ｐＨ值，溶出恒电流大小及铜、铅浓度比值等对ｄｔ／ｄＥ～Ｅ溶出曲线的影响。并得出了连测铜铅的条件。     

利用碘离子增感效应和金电极导数阳极溶出法研究铜丶铅和镉的同时测定

A method of simultaneous determination of copper (II), lead (II) and cadmium (II) in sulphuric acid-iocide ion medium was established by derivative anodic stripping voltammetry (DASV) on the gold electrode. The peak theights of lead and cadmium were increased by enhancement effect of iodide ion and the peaks of bismuth and copper were well formed and completely resolved on gold electrode in the presence of iodide ion, therefore peak of copper is not affected by bismuth. The sensitivities for copper, lead and cadmium were very high and their peak potentials in the stripping voltammogram were +0.25, -0.2 and -0.27 volt, respectively. The dependence of peak height of these elemets on their concentrations was linear. The detection limits for copper, lead and cadmium were 0.2 0.2 and 0.05 ppb, respectively. We have further studied the electrode process by means of triangle cyclic voltammetry and proved that he electrode reaction of copper is reversible, and that the reversibility of electrode reactions of lead and cadmium is not good.     

电感耦合等离子体发射光谱法测定粗二氧化碲中 铜、铅、锑、铋、砷和硒

粗二氧化碲作为碲精炼或碲化工产品生产的重要原料,其中共存元素铜、铅、砷、锑、铋、硒含量的准确测定对于生产过程质量控制和贸易结算具有重要意义,但目前没有粗二氧化碲中铜、铅、砷、锑、铋、硒含量检测的标准分析方法。采用王水和饱和氟化氢铵分解试样,在王水和酒石酸介质中,选用Cu 327.393 nm、Pb 220.353 nm、Sb 217.582 nm、Bi 223.061 nm、As 193.696 nm、Se 196.026 nm为分析谱线,采用电感耦合等离子体发射光谱(ICP-AES)法测定粗二氧化碲中铜、铅、锑、铋、砷和硒含量。各元素校准曲线的相关系数均大于0.999;铜、铅、锑、铋、砷和硒的检出限分别为0.0004%、0.0005%、0.0006%、0.0007%、0.0004%和0.0007%,定量检出限分别为0.0012%、0.0016%、0.0020%、0.0025%、0.0013%和0.0025%。按照实验方法测定5个粗二氧化碲样品中铜、铅、锑、铋、砷和硒,测定结果的相对标准偏差(RSD,n=7)为0.79%~4.8%,加标回收率为96.0%~103%。方法简单,精密度和准确度较高,可用于测定粗二氧化碲中铜、铅、砷、锑、铋、硒含量。     

Literature survey of on-line elemental speciation in aqueous solutions

The literature about the on-line speciation in water has been comprehensively studied. Critical examination of this subject reveals that a great deal of work has been performed in this area for inorganic metal species and some organic compounds. The topic studied mainly includes the speciation of chromium, selenium, copper, arsenic, lead, cadmium, mercury, iron, aluminium, nickel, tin, antimony, phosphorus, nitrogen and others. The present literature survey includes also comments about the possibilities and problems of speciation as a function of analytical steps, general strategies involved and methods proposed in the literature for each element or a series of elements.     

Analysis of main constituents of lead- and tin-base alloys by controlled potential electrolysis

The paper describes the successive electrolytic deposition by the controlled potential technique, of antimony, lead (+ copper) and tin in lead- or tin-base alloys, and of bismuth, antimony, lead and tin in bismuth-base alloys.     

Cation-exchange separation of metals in dimethyl sulphoxide-aqueous hydrochloric acid media

The behaviour of bismuth, cadmium, copper, lead, silver, tin and zinc on a cation-exchange resin in a solvent system consisting of dimethyl sulphoxide, hydrochloric acid and water was studied. The distribution coefficients of these metal ions between liquid and resin were determined as functions of the concentration of dimethyl sulphoxide and of hydrochloric acid. On the basis of the distribution coefficients found, predictions were made as to the possibilities of separating these metals from mixtures. Such separations were confirmed experimentally for bismuth from lead, bismuth from copper, zinc from lead, lead from cadmium, silver from copper, silver from lead, lead from cadmium from zinc, bismuth from lead from zinc, and bismuth from zinc from copper.     

Determination of cadmium, copper, lead and zinc in water samples by flame atomic absorption spectrometry after cloud point extraction

Cloud point extraction (CPE) has been used for the simultaneous pre-concentration of cadmium, copper, lead and zinc after the formation of a complex with 1-(2-thiazolylazo)-2-naphthol (TAN), and later analysis by flame atomic absorption spectrometry (FAAS) using octylphenoxypolyethoxyethanol (Triton X-114) as surfactant. The chemical variables affecting the separation phase and the viscosity affecting the detection process were optimized. At pH 8.6, pre-concentration of only 50 ml of sample in the presence of 0.05% Triton X-114 and 2×10⁻⁵ mol l⁻¹ TAN permitted the detection of 0.099, 0.27, 1.1 and 0.095 ng ml⁻¹ cadmium, copper, lead and zinc, respectively. The enhancement factors were 57.7, 64.3, 55.6 and 63.7 for cadmium, copper, lead and zinc, respectively. The proposed method has been applied to the determination of cadmium, copper, lead and zinc in water samples and a standard reference material (SRM).     

Determination of antimony in concentrates, ores and non-ferrous materials by atomic-absorption spectrophotometry after iron-lanthanum collection, or by the iodide method after further xanthate extraction

Methods for determining trace and moderate amounts of antimony in copper, nickel, molybdenum, lead and zinc concentrates and in ores are described. Following sample decomposition, antimony is oxidized to antimony(V) with aqua regia, then reduced to antimony(III) with sodium metabisulphite in 6M hydrochloric acid medium and separated from most of the matrix elements by co-precipitation with hydrous ferric and lanthanum oxides. Antimony (>/= 100 mug/g) can subsequently be determined by atomic-absorption spectrophotometry, at 217.6 nm after dissolution of the precipitate in 3M hydrochloric acid. Alternatively, for the determination of antimony at levels of 1 mug/g or more, the precipitate is dissolved in 5M hydrochloric acid containing stannous chloride as a reluctant for iron(III) and thiourea as a complexing agent for copper. Then tin is complexed with hydrofluoric acid, and antimony is separated from iron, tin, lead and other co-precipitated elements, including lanthanum, by chloroform extraction of its xanthate. It is then determined spectrophotometrically, at 331 or 425 nm as the iodide. Interference from co-extracted bismuth is eliminated by washing the extract with hydrochloric acid of the same acid concentration as the medium used for extraction. Interference from co-extracted molybdenum, which causes high results at 331 nm, is avoided by measuring the absorbance at 425 nm. The proposed methods are also applicable to high-purity copper metal and copper- and lead-base alloys. In the spectrophotometric iodide method, the importance of the preliminary oxidation of all of the antimony to antimony(V), to avoid the formation of an unreactive species, is shown.     

Preconcentration and quantification of copper,lead, and cadmium using anion exchangers modified with azo compounds

The sorption of azo compounds on anion exchangers of different basicity is studied; the physicochemical and analytical properties of the modified adsorbents are studied. For the prepared modified adsorbents, the conditions of the preconcentration and elution of copper, lead, and cadmium are determined. The analytical potency of the adsorbent Amberlite-Zincon for the group preconcentration and isolation of copper, lead, and cadmium from solutions of complex composition is demonstrated. An efficient combination procedure for the determination of copper, lead, and cadmium in geothermal waters are developed.