Iron(II) and cobalt(II) complexes bearing N-((pyridin-2-yl)methylene)-quinolin-8-amine derivatives: Synthesis and application to ethylene oligomerization

A series of tridentate NˆNˆN iron(II) and cobalt(II) complexes containing N-((pyridin-2-yl)methylene)-quinolin-8-amine derivatives were synthesized and characterized by elemental and spectroscopic analyses. The molecular structure of 1a was confirmed by X-ray diffraction analyses. On treatment with modified methylaluminoxane, these metal complexes exhibited good catalytic activities up to 2.8 × 10⁶ g mol⁻¹(Fe) h⁻¹ for ethylene oligomerization, and butenes were the major products with nice selectivity for 1-C₄. The steric and electronic effects on catalytic activities of metal complexes were carefully investigated as well as the influence of various reaction parameters. In the catalytic system, Fe(II) complexes performed better catalytic activities than their Co(II) analogues. With ligands having bulky substituents, the better catalytic activity was observed in catalytic system of Fe(II) complex, however, the lower catalytic activity was obtained in catalytic system of Co(II) complexes.     

Synthesis, characterization and X-ray crystal structures of seven-coordinate pentagonal-bipyramidal zinc(II), cadmium(II) and tin(IV) complexes of a pentadentate N3S2 thiosemicarbazone

New complexes of the general formula, [M(H₂dap⁴NMetsc)(H₂O)₂](NO₃)₂·H₂O (M = Zn²⁺, Cd²⁺; H₂dap⁴NMetsc = 2,6-diacetylpyridinebis(⁴N-methylthiosemicarbazone) and [Sn((dap⁴NMetsc)X₂] (X = Ph, Cl and I) (dap⁴NMetsc = the doubly deprotonated form of 2,6-diacetylpyridine bis(⁴N-methylthiosemicarbazone) have been synthesized and structurally characterized by a variety of physico-chemical techniques. X-ray crystallographic structure determination shows that in the zinc and cadmium complexes, the bis(thiosemicarbazone) ligand coordinates as a neutral N₃S₂ pentadentate chelating agent through the two azomethine nitrogen atoms, the pyridine nitrogen atom and the two thione sulfur atoms. The N₃S₂ donors of the ligand occupy the equatorial plane and the two aqua ligands occupy the sixth and seventh axial positions of the seven-coordinated cadmium(II) and zinc(II) ions. In the tin(IV) complexes, however, the thiosemicarbazone is coordinated to the tin(IV) ion as a dinegatively charged pentadentate chelating agent via the pyridine nitrogen atom, the two azomethine nitrogen atoms and the two thiolate sulfur atoms. The two apical positions of the seven-coordinate tin(IV) ion are occupied by either phenyl, chlorido or iodido ligands. In each of the complexes, the overall geometry adopted by the metal ion may be considered as a distorted pentagonal-bipyramid.     

The synthesis and characterization of three new vic -dioximes and their nickel(II), copper(II) and cobalt(II) complexes

Three new vic-dioximes, [L¹H₂], N-(4-ethylphenyl)amino-1-acetyl-1-cyclohexenylglyoxime, [L²H₂], N-(4-butylphenyl)amino-1-acetyl-1-cyclohexenylglyoxime, and [L³H₂], N-(4-methoxyphenyl)amino-1-acetyl-1-cyclohexenylglyoxime were synthesized from 1-acetyl-1-cyclohexeneglyoxime and the corresponding substituted aromatic amines. Metal complexes of these ligands were also synthesized with Ni(II), Cu(II), and Co(II) salts. These new compounds (ligands and complexes) were characterized with FT–IR, magnetic susceptibility measurement, molar conductivity measurements, mass spectrometry measurements, thermal methods (e.g. thermal gravimetric analysis), ¹H NMR (Nuclear Magnetic Resonance) and ¹³C NMR spectral data and elemental analyses.     

Reduction of CO2 by nickel (II) macrocycle catalyst at HMDE

With the aim of finding a suitable electrocatalyst for the efficient reduction of carbon dioxide, the electrochemistry of nickel (II) complex of 1,3,6,9,11,14-hexaazatricyclo [12·2·1·1] octadecane was studied using cyclic voltammetry (CV) and controlled-potential electrolysis (CPE) techniques in the presence and absence of CO₂ in 100% H₂O, CH₃CN-H₂O mixtures (20–100%) and DMF-H₂O (70–100%) mixtures. The efficiency of this process is determined using the coulometry technique. CO is the major product in the gaseous phase and HCOOH the sole product formed in the solution phase.     

Redox-active antifungal cobalt(II) and copper(II) complexes with sterically hindered o-aminophenol derivatives

Co(II) complexes with 4,6-di(tert-butyl)-2-aminophenol (HL^I) and 2-anilino-4,6-di(tert-butyl)phenol (HL^II) have been synthesized and characterized by means of physico-chemical methods. The compounds HL^I and HL^II coordinate in their singly deprotonated forms and behave as bidentate O,N-coordinated ligands; their low-spin Co(II) complexes are characterized by CoN₂O₂ coordination modes and square planar geometry. Both the free ligands and their Co(II) and Cu(II) complexes (we have produced and characterized the latter before) exhibit a pronounced antifungal activity against Aspergillus niger, Fusarium spp., Mucor spp., Penicillium lividum, Botrytis cinerea, Alternaria alternata, Sclerotinia sclerotiorum, Monilia spp., which in a number of cases is comparable with that of Nystatin and Terbinafine or even higher. The reducing properties of the ligands and their metal(II) complexes, as well as their antifungal activities, were found to decrease in the order: Cu(L^I)₂ > Cu(L^II)₂ ? Co(L^I)₂ > Co(L^II)₂ > HL^I > HL^II.     

Synthesis and structural characterization of novel ruthenium(II) complexes featuring an N,N,O-scorpionate ligand: A versatile synthetic precursor for open-face scorpionatoruthenium(II) complexes

The syntheses and characterization of novel ruthenium(II) complexes containing bis(3,5-dimethylpyrazol-1-yl)acetato (bdmpza), a new class of scorpionate ligands, are reported herein. [RuCl(bdmpza)(η⁴-1,5-cyclooctadiene)] (1) was found to be a versatile precursor to synthesize a wide range of new ruthenium(II) complexes with the bdmpza ligand. The treatment of 1 with pyridine (py), diphenylphosphinoethane (dppe), 2,2′-bipyridyl (bpy), 1,10-phenanethroline (phen), or bispicolylamine (Hbpica) in refluxing N,N-dimethylformamide resulted in displacement of the 1,5-cyclooctadiene ligand to afford [RuCl(bdmpza)(py)₂] (2), [RuCl(bdmpza)(dppe)] (3), [RuCl(bdmpza)(bpy)] (4), [RuCl(bdmpza)(phen)] (5), and [Ru(bdmpza)(Hbpica)]Cl (6Cl) in good yields, respectively. The structures of 1–4, and 6 were determined by X-ray structure analyses.     

Convenient synthesis of Pt(0) olefin complexes by colorimetric reduction of Pt(II) complexes with SmI2

Homoleptic olefin platinum(0) complexes, Pt(C₇H₁₀)₃ and Pt(cod)₂, were synthesized by the colorimetric reduction of platinum(II) complexes with SmI₂ in the presence of 2-norbornene or COD. This is a practically more convenient method for the synthesis of the Pt(0) complexes than the literature method employing Li₂(cot).     

Mononuclear hydridocarbonyl ruthenium complexes incorporating N2O2 bis-chelating ligands

The reactions of [RuH(CO)Cl(PPh₃)₃] with N,N^′-bis(salicylidine)-hydrazine (H₂bsh) and N,N^′-bis(salicylidine)-p-phenylene diammine (H₂bsp) in presence of KOH in methanol led in the formation of neutral mononuclear complexes with the formulations [RuH(CO)(PPh₃)₂(L)] (LHbsh or Hbsp). These present the first examples where the ligands H₂bsh or H₂bsp provide only two of its available donor sites for interaction with the metal centre. The complexes have been characterized by elemental analyses, FAB-MS, IR, ¹H, ¹³C, ³¹P NMR and electronic spectral studies. Molecular structure of the representative complex [RuH(CO)(PPh₃)₂(Hbsh)] have been determined by single crystal X-ray analysis.     

镧石型碳酸镨钕向碱式碳酸镨钕的相转变反应特征及其应用

本文研究了镧石型碳酸镨钕[（PrNd）₂（CO₃）₃·8H₂O,LPN]在95℃的不同起始pH值的溶液中陈化不同时间所得样品的XRD衍射图,证明所得样品为碱式碳酸镨钕[（PrNd）（OH）（CO₃）,BPN]。为此,详细研究了这一相态转变的反应条件以及粒子特征变化。结果表明：LPN是由片状或条状结晶连生而成的聚集体,具有大的粒度和小的堆密度。当在热的水溶液中陈化时,由于水解反应而发生由LPN向BPN的相转变。这一相转变可以在95℃下pH=7以上的溶液中发生,其转化率随起始溶液pH值的升高和陈化时间的延长而增大。随着相转变的进行,溶液的pH值开始下降明显,而后趋于平缓。相应地,大的团聚体颗粒解散成小的单个粒子,导致粒度减小,分布变窄,氯根含量降低和堆密度的增大。而且,这些变化直接与溶液pH值和陈化时间相关。据此,发展了一种新的制备具有高堆密度、低氯根含量、细粒度和窄分布的新方法,而且通过改变相转变条件可以方便地调谐颗粒特征。     

Synthesis and characterisation of new pyrazole-phosphinite ligands and their ruthenium(II) arene complexes

The new potentially bidentate pyrazole-phosphinite ligands [(3,5-dimethyl-1H-pyrazol-1-yl)methyl diphenylphosphinite] (L¹) and [2-(3,5-dimethyl-1H-pyrazol-1-yl)ethyl diphenylphosphinite] (L²) were synthesised and characterised. The reaction of L¹ and L² with the dimeric complexes [Ru(η⁶-arene)Cl₂]₂ (arene = p-cymene, benzene) led to the formation of neutral complexes [Ru(η⁶-arene)Cl₂(L)] (L = L¹, L²) where the pyrazole-phosphinite ligand is κ¹-P coordinated to the metal. The subsequent reaction of these complexes with NaBPh₄ or NaBF₄ produced the [Ru(η⁶-p-cymene)Cl(L²)][BPh₄] and [Ru(η⁶-benzene)Cl(L²)][BF₄] compounds which contain the pyrazole-phosphinite ligand κ²-P,N bonded to ruthenium. All the complexes were fully characterised by analytical and spectroscopic methods. The structure of the complex [Ru(η⁶-p-cymene)Cl(L²)][BPh₄] was also determined by a X-ray single crystal diffraction study.     

Synthesis and structure of C2-symmetric N-heterocyclic carbene complexes of palladium

The first 9- and 11-membered cis and trans C₂-symmetric benzimidazol-2-ylidene palladium(II) complexes based on a trans-2,2-dimethyl-1,3-dioxalane backbone were synthesised and the configuration of the complexes was elucidated via NMR and X-ray crystallography.     

KIT-6负载CeO2催化CO2和甲醇合成碳酸二甲酯

采用不同老化温度(80、100、120和150℃)合成了一系列KIT-6载体,并通过浸渍法制备了相应的CeO_2/KIT-6催化剂。结合X射线衍射、N_2物理吸附、NH_3程序升温脱附、CO_2程序升温脱附、透射电子显微镜、傅里叶变换红外光谱和X射线光电子能谱等表征结果,详细考察了老化温度对KIT-6结构以及CeO_2/KIT-6催化剂直接催化CO_2和甲醇合成碳酸二甲酯(DMC)反应活性的影响。结果表明,不同老化温度下制备的KIT-6均保持其独特的三维孔道结构。随着老化温度升高,KIT-6比表面积先增大后减小,当老化温度为100℃时,KIT-6比表面积达到最大(683 m~2·g~(-1))。KIT-6较高的比表面积有利于提高CeO_2分散度,进而提高暴露的活性位点数量,催化活性随催化剂表面中等碱/酸性吸附位数量和Ce~(3+)含量的增加而逐渐提高。其中,CeO_2/100-KIT-6催化剂中CeO_2颗粒尺寸最小(5.9 nm),暴露的活性位数量最高,催化活性最佳。随后,考察了反应温度和压力对CeO_2/100-KIT-6催化活性的影响。随着反应温度提高,催化活性先升高后降低,当反应温度为140℃时,催化活性最高;且催化活性随反应压力的提高而逐渐增加。在反应温度为140℃、压力为6.8 MPa条件下,催化剂经6次循环后,DMC收率由15 mmol·g_(CeO_2)~(-1)逐渐降低至2.8 mmol·g_(CeO_2)~(-1),原因归结为反应过程中CeO_2纳米颗粒发生团聚,使暴露出的活性位数量减少。     

镧石型碳酸镨钕向碱式碳酸镨钕的相转变反应特征及其应用

镧石型碳酸镨钕[(PrNd)2(CO3)3·8H2O,LPN]在95℃的不同起始pH值的溶液中陈化不同时间所得样品的XRD衍射图证明了LPN向碱式碳酸镨钕[(PrNd)(OH)(CO3),BPN]的相态转变。为此,详细研究了这一相态转变的反应条件以及粒子特征变化。结果表明:LPN是由片状或条状结晶连生而成的聚集体,具有大的粒度和小的堆密度。当在热的水溶液中陈化时,由于水解反应而发生由LPN向BPN的相转变。这一相转变可以在95℃下pH=7以上的溶液中发生,其转化率随起始溶液pH值的升高和陈化时间的延长而增大。随着相转变的进行,溶液的pH值开始下降明显,而后趋于平缓。相应地,大的团聚体颗粒解散成小的单个粒子,导致粒度减小,分布变窄,氯根含量降低和堆密度的增大。而且,这些变化直接与溶液pH值和陈化时间相关。据此,发展了一种新的制备具有高堆密度、低氯根含量、细粒度和窄分布的新方法,而且通过改变相转变条件可以方便地调谐颗粒特征。     

Synthesis,spectroscopic and electrochemical studies of copper(II) and cobalt(II) complexes of three unsymmetrical vic -dioximes ligands

Cobalt(II) and copper(II) complexes with three dioxime ligands cyclohexylamine-p-tolylglyoxime (L₁H₂), tert-butyl amine-p-tolylglioxime (L₂H₂) and sec-butylamine-p-tolylglyoxime (L₃H₂), have been prepared. The metal to ligand ratios of the complexes were found to be 1?:?2. The Cu(II) complexes of these ligands are proposed to be square planar; the Co(II) complexes are proposed to be octahedral with water molecules as axial ligands. Ligands and complexes are soluble in common solvents such as DMSO, DMF, CHCl₃ and C₂H₅OH. The ligands have been characterized by elemental analysis, IR, UV-VIS, ¹H?NMR, ¹³C?NMR and thermogravimetric analysis (TGA). The complexes were characterized by elemental analysis, IR, UV-VIS, magnetic susceptibility measurements, thermogravimetric analysis (TGA) and electrochemistry. Electrochemical properties of metal complexes show quasi-reversible one-electron redox processes. However, Co(L₁H)₂ and Cu(L₁H)₂ complexes show another oxidation peak in the positive region. This single irreversible oxidation peak is caused by the cyclic ring of the ligand. Data also revealed that the electron transfer rates of metal complexes with L₁H₂ are higher than the other complexes.     

Reactions of Ru(Cp) complexes with P(o-tolyl)3

Reaction of [Ru(Cp^∗)(CH₃CN)₃](PF₆) with P(o-tolyl)₃ affords [Ru(Cp^∗){(η⁶-o-tolyl)P(o-tolyl)₂}](PF₆) (4) in which the P-atom is not coordinated to the metal. The solid-state structure of 4 has been determined. A related reaction with P(p-tolyl)₃ reveals a small quantity [Ru(Cp^∗){(η⁶-p-tolyl)P(o-tolyl)₂}](PF₆), in solution, but mostly the expected bis-phosphine complex. Reaction of the Ru(IV) dication, [Ru(Cp^∗)(η³-PhCHCHCH₂)(DMF)₂](PF₆)₂, with P(o-tolyl)₃ gives a mixture of the phosphonium salt, C₆H₅CHCHCH₂P(o-tolyl)₃ (9) and the dication [Ru(Cp^∗) (η⁶-C₆H₅CHCHCH₂P(o-tolyl)₃)](PF₆)₂ (10). Salt 9 forms via attack of the P-atom on the allyl ligand. The latter product results from complexation of 9 via the phenyl group of the former allyl ligand. It would seem that the sterically demanding P(o-tolyl)₃ ligand is not readily compatible with the Ru(Cp^∗) fragment, in either the +2 or +4 oxidation state. Detailed NMR studies are reported.     

Single-Crystal Growth and Classification of EuAlF5 and Solid Solutions M(II)1−xEuxAlF5 (M=Ca, Sr, Ba) within the Structural Family of Tetragonal M(II)M(III)F5 Compounds

The compound EuAlF₅, as well as the solid solutions Ca_0.19(1)Eu_0.81(1)AlF₅, Sr_0.15(1)Eu_0.85(1)AlF₅, Sr_0.55(1)Eu_0.45(1)AlF₅, Sr_0.77(1)Eu_0.23(1)AlF₅, and Ba_0.62(1)Eu_0.38(1)AlF₅, crystallize in colorless tetragonal columns. These have been prepared by solid state reactions at 900°C, starting from mixtures of the binary fluorides. According to Vegard's rule the solid solution Sr_1−xEu_xAlF₅ shows a linear dependence of the crystal volume on the molar ratio Eu/Sr. All crystal structures have been refined from single-crystal diffractometer data. EuAlF₅ and the M_1−xEu_xAlF₅ (M=Ca, Sr) compounds obtained are isotypic with β-SrAlF₅. They crystallize in a superstructure in space group I4₁/a (no. 88) with 64 formula units and lattice parameters a≈19.9 Å, c≈14.3 Å. The structure is characterized by chains of trans-corner-sharing [AlF_4/2F_2/1] and branched [AlF_5/1F_1/2] octahedra forming a channel structure. Inside the channels isolated ordered dimeric units [AlF_4/1F_2/2]₂ are located. The divalent metal atoms show coordination numbers 8 and 9; they connect the [AlF₆] octahedra into a three-dimensional structure. Ba_0.62(1)Eu_0.38(1)AlF₅ is isotypic with the corresponding Sr compound Ba_0.43(1)Sr_0.57(1)AlF₅, and it crystallizes with 16 formula units and lattice parameters a=14.3860(7) Å, c=7.2778(3) Å in space group I4/m (no. 87). The network structure is identical with that of EuAlF₅. Instead of the dimeric units, infinite chains [AlF_4/1F_2/2]_∞ of trans-corner-sharing [AlF₆] octahedra extending along the c- axis are located inside the channels. The bridging fluorine atoms of this chain show large anisotropic displacement parameters, but no superstructure reflections have been observed for this compound.     

关于限域离子液体吸附CO_2的密度泛函理论(DFT)的研究

近年来,温室效应日趋严重,因此吸收CO_2的材料受到了广泛的关注.采用了密度泛函理论(DFT)研究以SiO_2为载体的限域离子液体对CO_2的吸附.对比纯净离子液体(ILs)以及限域离子液体与CO_2的相互作用情况,在这两种状态下两种体系的吸附情况大不相同.从几何结构、相互作用以及电荷分析等方面对ILs、 SiO_2以及ILs/SiO_2复合结构进行研究.计算结果表明,载体、离子液体和CO_2之间都存在较强的相互作用.离子液体的负载不仅改变了SiO_2载体的结构,而且受载体的影响阴阳离子之间的相互作用力也发生了改变.计算结果为进一步深入限域离子液体对CO_2的吸附打下了理论基础.     

La2(CO3)3纳米线的微乳液法制备与表征

La₂(CO₃)₃ nanowires were prepared in the nonionic surfactant microemulsion(Triton X-100/cyclohexane/water)system. Transmission electron microscopy (TEM) and selected area electronic diffraction (SAED) were used to characterize the shape and size of the products. The results showed that the pH value and concentration of mother solution, temperature and aging time all could affect the morphology and size of the La₂(CO₃)₃ nanowires. The lengths of the nanowires were more than 10 μm and the diameters were in the range of 30～200 nm.     

Quinolin-2(1H)-one-triazole derived Schiff bases and their Cu(II) and Zn(II) complexes: Possible new therapeutic agents

The condensation of 4-amino-1,2,4-triazole with N-substituted-3-formyl-4-hydroxyquinolin-2-(1H)-one derivatives has lead to the synthesis of a new series of quinolin-2(1H)-one-triazole derived Schiff base ligands (1–3). Cu(II) and Zn(II) complexes (1a–3a and 1b–3b, respectively) of these ligands were also prepared. The complexes were characterised by standard techniques and for two of the complexes X-ray crystallography confirmed that the geometry at the metal centre was octahedral in both cases and that the Schiff base acted as a bidentate ligand coordinating to the metal(II) ion through the deprotonated oxygen and azomethine nitrogen atoms. All of the compounds were investigated for their antimicrobial activities against a fungal strain, Candida albicans, and against Gram-positive and Gram-negative bacteria. The compounds were found to be active against C. albicans but inactive against Staphylococcusaureus and Escherichia coli.     

Synthesis and structural characterization of cobalt(II) and zinc(II) complexes with 2-(indazol-1-yl)-2-thiazoline (TnInA). X-ray characterization of [CoCl2(TnInA)2] · C2H6O and [(M)(TnInA)2(H2O)2](NO3)2 (M = Co, Zn)

Several complexes of 2-(indazol-1-yl)-2-thiazoline (TnInA) with the divalent ions Co and Zn have been synthesized by the direct combination of the ligand and the metal chloride or nitrate hydrated salts in ethanol. These complexes have been characterized by a variety of physical–chemical techniques. Moreover, the structures of [CoCl₂(TnInA)₂] · C₂H₆O (1) and [(M)(TnInA)₂(H₂O)₂](NO₃)₂ (M = Co, 3; Zn, 4) were determined by single-crystal X-ray diffraction. In all the complexes, the ligand TnInA bonds to the metal ion through the indazole and thiazoline nitrogen atoms. In complex 1 the environment around the cobalt ion may be described as a distorted octahedron with two TnInA ligands and two chlorine ligands. Compounds 3 and 4 are isostructural with a distorted octahedral geometry around the metal center, being linked to two water molecules and two TnInA ligands. However, in complex [ZnCl₂(TnInA)] (2) the zinc atom is four-coordinated with a probable tetrahedral environment with two chloro ligands and one TnInA ligand bonded to the metal ion.