Stereoselective synthesis of (E)-N,N-diethyl-3-(imidazo[1,2-a]pyrid-2-yl)-2-(phenylsulfonyl)propenamide

The title compound, gem-amidovinylsulfone 3, was synthesized stereoselectively by aldolic condensation of N,N-diethylphenylsulfonylacetamide 1 on imidazo[1,2-a]pyridine-2-carbaldehyde 2 adding Et₃N at the end. The X-ray crystal structure of 3 [C₂₀H₂₁N₃O₃S: M_r=383.5, monoclinic, P2₁, a=8.191(4) Å, b=21.132(2) Å, c=11.752(1) Å, β=96.40(2)°, V=2022(1) Å³, Z=4 (two molecules per asymmetric unit), D_calc=1.260 g cm⁻³, λ(Mo Kα)=0.71073 Å, μ=0.184 mm⁻¹, F(000)=808, T=293(2)K, R=0.059 for 5105 observed reflections with I≥2σ(I)] was determined, and confirmed the (E) configuration.     

A Study on the Diastereoselective Synthesis of α‐Fluorinated β3‐Amino Acids by α‐Fluorination

The treatment of a β³‐amino acid methyl ester with 2.2 equiv. of lithium diisopropylamide (LDA), followed by reaction with 5 equiv. of N‐fluorobenzenesulfonimide (NFSI) at ?78° for 2.5 h and then 2 h at 0°, gives syn‐fluorination with high diastereoisomeric excess (de). The de and yield in these reactions are somewhat influenced by both the size of the amino acid side chain and the nature of the amine protecting group. In particular, fluorination of N‐Boc‐protected β³‐homophenylalanine, β³‐homoleucine, β³‐homovaline, and β³‐homoalanine methyl esters, 5 and 9 – 11 , respectively, all proceeded with high de (>86% of the syn‐isomer). However, fluorination of N‐Boc‐protected β³‐homophenylglycine methyl ester ( 16 ) occurred with a significantly reduced de. The use of a Cbz or Bz amine‐protecting group (see 3 and 15 ) did not improve the de of fluorination. However, an N‐Ac protecting group (see 17 ) gave a reduced de of 26%. Thus, a large N‐protecting group should be employed in order to maximize selectivity for the syn‐isomer in these fluorination reactions.     

An improved synthesis of 3-[3-(trifluoromethyl)-3H-1,2-diazirin-3-yl]aniline: A key intermediate in the synthesis of photoaffinity probes

An improved synthesis of 3-[3-(trifluoromethyl)-3H-1,2-diazirin-3-yl]aniline, achieving an overall yield of 38% over seven steps is reported. Only three chromatographic separations were needed and the preparation of ～0.7 g of the target compound was demonstrated. The stability of the diazirine in solution at room temperature while exposed to ambient light was studied. No significant degradation of the compound was observed over the course of five weeks in a 130 mM sample and only minor degradation was observed in weaker samples (10, 5, and 2.5 mM), as demonstrated by ¹H and ¹⁹F NMR.     

An analysis of the through-bond interaction using the localized molecular orbitals—II : Long-range proton hyperfine coupling in bridgehead alkyl radicals: bicyclo[1.1.1]pent-1-yl,bicyclo[2.1.1]hex-1-yl and bicyclo[2.2.1]hept-1-yl radicals

The INDO calculations were performed on three bridgehead alkyl radicals; bicyclo[1.1.1]pent-1-yl, bicyclo[2.1.1]hex-l-yl and bicyclo[2.2.1]hept-1-yl radicals. We have transformed the canonical molecular orbitals obtained by the INDO method into the localized molecular orbitals. With the use of the obtained localized molecular orbitals, the variation in the hyperfine coupling constant at the bridgehead proton in these radicals was pursued in terms of the through-bond (and/or the through-space) interaction according to the method by which we selectively can pick up a particular interaction between the specified localized molecular orbitals in a radical. As a result of this analysis, it was found that the hyperfine coupling constants in these radicals can be expressed by the summation of several terms; through-virtuals, through-space, through-bond, and some other coupling terms.     

4-Chloro-3-(trifluoroacetyl)coumarin as a novel building block for the synthesis of 7-(trifluoromethyl)-6H-chromeno[4,3-b]quinolin-6-ones

4-Chloro-3-(trifluoroacetyl)coumarin was synthesized for the first time via direct TMSCl-mediated acylation of 4-hydroxycoumarin with TFAA followed by the treatment with POCl₃. The reaction of 4-chloro-3-(trifluoroacetyl)coumarin with commercially available anilines is a two-step method, which affords a set of 7-(trifluoromethyl)-6H-chromeno[4,3-b]quinolin-6-ones in good to excellent yields.     

Gas phase structure and conformational properties of trifluoroacetic anhydride, CF3C(O)OC(O)CF3

The geometric structure of trifluoroacetic anhydride, CF₃C(O)OC(O)CF₃, has been studied by gas electron diffraction (GED) and quantum chemical calculations (MP2 and B3LYP with 6-31G^* basis sets). The GED analysis results in a single conformer with synperiplanar orientation of the two CO bonds. This analysis, however, cannot discriminate between a planar equilibrium structure (C_2v symmetry) with large amplitude torsional motions around the OC bonds and a nonplanar equilibrium structure (C₂ symmetry) with a low barrier at the planar arrangement. An effective dihedral angle φ(COCO=18(4)° is obtained. Both quantum chemical methods predict a nonplanar equilibrium structure of C₂ symmetry and φ(COCO)=16.5° and 13.9°, respectively.     

Die isomeren bicyclo[4.2.1]nonen-(3)-ole-(2)und bicyclo[4.2.1]-nonanole-(2)1

The preparation of exo and endo bicyclo[4.2.1]nonen-(3)-ol-(2) (3) and (4), and the preparation of exo and endo bicyclo[4.2.1]nonanol-(2) (1) and (2) from 3,3-dihalotricyclo[4.2.1.0^2,4]nonyl derivatives is described. On the basis of the configuration of the allylic alkohols 3 and 4 the configuration of the saturated compounds 1 and 2 has been unequivocally determined.     

Die isomeren bicyclo[4.2.1]nonen-(2)-ole-(4) und bicyclo[4.2.1]nonanole-(3)1

The preparation of exo and endo bicyclo[4.2.1]nonen-(2)-ol-(4) (3) and (4), and the preparation of exo and endo bicyclo[4.2.1]nonanol-(3) (1) and (2) from 3,3-dihalotricyclo[4.2.1.0^2,4]nonenyl derivatives is described. On the basis of the configuration of the allylic alkohols 3 and 4 the configuration of the saturated compounds 1 and 2 has been unequivocally determined.     

4-Formylazetidin-2-ones, synthon for the synthesis of (2R,3S) and (2S,3R)-3-amino-2-hydroxydecanoic acid (AHDA)

An efficient synthesis of 3-amino-2-hydroxydecanoic acid (AHDA), a nonproteinogenic amino acid, using enantiopure 3-benzyloxy-4-formylazetidin-2-one as a building block is described. Both the enantiomers of AHDA have been synthesized from the corresponding enantiomer of 3-benzyloxy-4-formylazetidin-2-one in good yield and optical purity.     

Facile synthesis of novel CF3-substituted ring-fused furo[2,3-c]pyrazoles through Rh2(OAc)4 catalyzed [3+2] cycloaddition of 4-diazo-1-phenyl-3-(trifluoromethyl)-1H-pyrazol-5(4H)-one with aromatic alkynes

The Rh₂(OAc)₄ catalyzed [3+2] cycloaddition of 4-diazo-1-phenyl-3-(trifluoromethyl)-1H-pyrazol-5(4H)-one with aromatic alkynes was studied, and this protocol can be efficiently applied to the synthesis of the novel CF₃-substituted ring-fused furo[2,3-c]pyrazoles.     

Asymmetric synthesis of both enantiomers of syn-(3-trifluoromethyl)cysteine derivatives

The use of several chiral trifluoromethylated building blocks 1a, 1b, 9a and 9b was attempted to synthesize of syn-(3-trifluoromethyl)cysteine. A novel and efficient enantioselective synthesis of both enantiomers of syn-(3-trifluoromethyl)cysteine derivatives 12a and 12b was successfully achieved.     

Parallel Solid-Phase Synthesis of disubstituted 3-(1H-benzo[d]imidazol-2-yl)imidazolidine-2,4-diones and 3-(1H-benzo[d]imidazol-2-yl)-2-thioxoimidazolidin-4-ones

A multistep approach to construct novel 3-(1H-benzo[d]imidazol-2-yl)imidazolidine-2,4-diones and 3-(1H-benzo[d]imidazol-2-yl)-2-thioxoimidazolidin-4-ones from commercially available amino acids, amines, and carboxylic acids is described. Coupling of Fmoc-amino acid to resin-bound aminobenzimidazole provided following Fmoc elimination free amine. Treatment of the free amine with 1,1′-carbonyldiimidazole or 1,1′-thiocarbonyldiimidazole furnished the corresponding hydantoins and thiohydantoins via intramolecular cyclization. The desired aminobenzimidazole tethered hydantoins or thiohydantoins were isolated in good yields.     

An improved cyclization protocol for the synthesis of diazabicyclo[4.3.0]alkanes

We have recently described the synthesis of diazabicyclo[4.X.0]alkanes and their use as ligands for the prostate specific membrane antigene (PSMA). The key step of our synthetic route toward these diazabicycloalkanes is an oxidative cleavage of a bicyclic diol moiety followed by the attack of a nitrogen nucleophile to the resulting intermediate bisaldehyde. We herein describe the mechanism of this ring closure and its stereochemical consequences. In addition, we report a convenient method for trapping intermediate bisaldehydes by Wittig reagents. This trapping allows the synthesis of 3,5-disubstituted proline derivatives, which are shown to be versatile precursors for functionalized diazabicycloalkane dipeptide mimetics.     

Novel ammonium hexafluoroarsenate salts from reaction of (CF3)2NH,CF3N(OCF3)H,CF3N[OCF(CF3)2]H,CF3NHF and SF5NHF with the strong acid HF/ASF5.

Reactions of the fluorinated amines (CF₃)₂NH, CF₃N(OCF₃)H, CF₃N[OCF(CF₃)₂]H, CF₃NHF and SF₅NHF with the strong acid HF/AsF₅ form the corresponding ammonium salts R_f¹R_f²NH₂⁺AsF₆^? and R_fNFH₂⁺ AsF₆^? in high yield. [R_f¹=CF₃, R_f²=CF₃, CF₃O, (CF₃)₂CFO; R_f=CF₃, SF₅] The colorless crystalline solids are stable for prolonged periods at 22°C in sealed FEP containers. They have dissociation pressures at 22°C ranging from ～5 torr (R_fNFH₂⁺ AsF₆^?) to ～50 torr [CF₃N(OCF₃)H₂⁺AsF₆^?]. ¹⁹F NMR and Raman spectroscopy were used to identify the compounds.     

Efficient synthesis of the cyclopentanone fragrances (Z)-3-(2-oxopropyl)-2-(pent-2-en-1-yl)cyclopentanone and Magnolione

This paper describes the selective syntheses of two cis-isomer-enriched cyclopentanone fragrances: (Z)-3-(2-oxopropyl)-2-(pent-2-en-1-yl)cyclopentanone (four steps, 62% overall yield, 67% cis) and Magnolione^® (five steps, 60% overall yield, 55% cis). In addition, the asymmetric synthesis of (3aR,7aS)-5-methyl-2,3,3a,4,7,7a-hexahydro-1H-inden-1-one as well as (3a′R,7a′S)-5′-methyl-2′,3′,3a′,4′,7′,7a′-hexahydrospiro[[1,3]dioxolane-2,1′-indene] has been realized by an efficient kinetic resolution, which enables the selective synthesis of the 2S,3R-isomer-enriched 3 and 4.     

多核银配位聚合物[Ag_2(BPE)(CF_3COO)_2]_n和{Ag_5(CF_3COO)_5[(CH_3)_3NCH_2COO]}_n的水热合成与晶体结构

<正>过渡金属配位聚合物因其丰富的网络拓扑结构及其在吸附、催化、分子识别、光、电、磁等方面的潜在应用而成为无机化学和材料化学研究领域中     

(CF3)2Cd·D und (CF3)2Zn·D: neue reagenzien für difluorcarben-reaktionen [1]

During the thermal decomposition of (CF₃)₂Cd and (CF₃)₂Zn complexes primarily difluorocarbene is eliminated. The formation of CF₂ is unambiguously proved by matrix i.r. spectroscopy. Both (CF₃)₂Cd·D and (CF₃)₂Zn·D are excellent CF₂ sources, which can easily be prepared and handled, and which undergo CF₂ reactions even at low temperature. CF₂ insertion was found during the reaction of (CF₃)₂Te with (CH₃)₂Cd via the intermediate formation of a CF₃Cd compound to form CH₃TeCF₂CH₃. (CF₃)₂Cd·glyme reacts with (CH₃)₃Si(OCOCF₃) to CF₃Cd(OCOCF₃)·glyme; during this reaction CF₂ is also eliminated.     

Hybrid material from Zn[aminoacid]2 applied in the thio-Michael synthesis

Recently, methodologies that are in accordance with green chemistry principles have been garnering increasing attention. One of the most applied methods in this field is heterogeneous catalysis. In this context, many catalysts have been developed, and there is one remarkable class that has emerged: hybrid materials. Such heterogeneous catalysts are developed from organic and inorganic portions, especially from amino acids and metal salts, which are commonly found in the literature. Herein, we introduce Zn[Pro]₂ and Zn[Gly]₂ as heterogeneous catalysts in thio-Michael reactions via the implementation of two methods: via (1) a magnetic stirrer and (2) via an ultrasound device; the latter method resulted in minimally increased reaction yields in all cases.     

Enantioselective synthesis of (L)-Fmoc-α-Me-Lys(Boc)-OH via diastereoselective alkylation of oxazinone as a chiral auxiliary

Benzyl (2R,3S)-(−)-6-oxo-2,3-diphenyl-4-morpholinecarboxylate (4) was successively alkylated with methyl iodide and 1,4-diiodobutane using a base. In each alkylation step anti-alkylated product formed exclusively. The iodo group was displaced with azide, which served as a precursor for the side-chain amino function. Catalytic hydrogenation with concomitant cleavage of the chiral auxiliary afforded (L)-α-Me-Lys-OH (9) in a total of four steps in good yield. (L)-Fmoc-α-Me-Lys(Boc)-OH (16) was obtained from 9 via regioselective benzyloxycarbonylation. Alternately, (L)-Fmoc-α-Me-Lys(Boc)-OH (16) was obtained via Staudinger reduction of azide (8) in a total of six steps in good yield.