Cu2(μ-dppb)2(μ-Cl)2的合成、晶体结构及非线性光学性质

The complex Cu₂(μ-dppb)₂(μ-Cl)₂ has been synthesized from the reaction of CuCl， dppb and (n-Bu)₄NCl. The crystal belongs to the triclinic with space group P1. The unit cell parameters are: a=9.939(4)?， b=10.083(6)?， c=14.104(5)?， α=76.46(3)°， β=71.02(2)°， γ=70.87(5)°. The single crystal X-ray diffraction analysis reveals that it has a bi-ring structure with a symmetry center at the middle of two Copper atoms. The outer ring is a 14-membered ring of Cu-dppb-Cu-dppb， and the inner ring is a 4-membered ring composed of two Cl^- and two Cu(Ⅰ). Investigation of third-order optical nonlinearity shows that it exhibits considerable nonlinear absorptive and self-defocusing effect with α₂=1.75×10^-13m·W^-1 and n₂=3.19×10^-18m²·W^-1. CCDC: 193113.     

Stepwise addition of CuBr at [(dtc)2Mo2(S)2(μ-S)2] (dtc=diethyldithiocarbamate): syntheses and crystal structures of two Mo/Cu/S clusters [(dtc)2Mo2(μ3-S)(μ-S)3(CuBr)] and [(dtc)2Mo2(μ3-S)4(CuBr)2]

Reactions of [(dtc)₂Mo₂(S)₂(μ-S)₂] with one or two equivalents of CuBr in CH₂Cl₂ afforded two new heterobimetallic sulfide clusters, [(dtc)₂Mo₂(μ₃-S)(μ-S)₃(CuBr)] (1) and [(dtc)₂Mo₂(μ₃-S)₄(CuBr)₂] (2). Both compounds were characterized by elemental analysis, IR, UV-vis and X-ray analysis. Compound 1 contains a butterfly-shaped Mo₂S₄Cu core in which one CuBr unit is coordinated by one bridging S and two terminal S atoms of the [(dtc)₂Mo₂(S)₂(μ-S)₂] moiety. In the structure of 2, one [(dtc)₂Mo₂(S)₂(μ-S)₂] moiety and two CuBr units are held together by six Cu-μ₃-S bonds, forming a cubane-like Mo₂S₄Cu₂ core.     

Synthesis,structure characterization and thermal properties of [Zr6(μ3-O)4(μ3-OH)4(OOCCH2Bu)9(μ2-OH)3]2

Oxo/hydoxo zirconium(IV) complex of the general formula [Zr₆(μ₃-O)₄(μ₃-OH)₄(OOCCH₂^tBu)₉(μ₂-OH)₃]₂ has been isolated, when Zr(OⁱPr)₄ reacted with a 2-fold excess of 3,3-dimethylbutyric acid. Single crystal X-ray diffraction data, collected at 103 and 153 K, showed that the studied compound crystallizes in hexagonal system (P6₃/m (no. 176)). Structure consists of dimers composed of [Zr₆(μ₃-O)₄(μ₃-OH)₄(OOCCH₂^tBu)₉] sub-units, linked by six μ₂-OH bridges. Infrared spectroscopic studies proved the presence of hydroxo groups in the structure of studied clusters and formation of different types of oxo/hydroxo bridges. The application of variable temperature infrared spectroscopy and differential scanning calorimetry revealed that the structure of this complex undergoes the phase transitions at 143–183 and 203–293 K. Comparison of spectral and crystallographic data suggests that these phase transitions might be related to changes in the strength of Zr–O bonds of μ₂-OH bridges linking complex sub-units, and change in symmetry of the crystal lattice (from hexagonal to trigonal). Analysis of thermogravimetric data showed that decomposition of [Zr₆(μ₃-O)₄(μ₃-OH)₄(OOCCH₂^tBu)₉(μ₂-OH)₃]₂ proceeds with complete conversion to ZrO₂ (monoclinic form) between 603 and 803 K.     

Synthesis and crystal structure of new one-dimensional copper(II) complex [Cu4(En)2(μ1,1-N3)4(μ1,1,1-N3)2(μ1,3-N3)2]n

A new polymer azido-bridged copper(II) complex [Cu₄(En)₂(μ_1,1-N₃)₄(μ_1,1,1-N₃)₂(μ_1,3-N₃)₂] _n (I) (En = ethylenediamine) has been synthesized and crystallography characterized. Complex I shows one-dimensional coordination polymeric structure based on a tetranuclear cluster unit [Cu₄(En)₂(μ_1,1-N₃)₄(μ_1,1,1-N₃)₂(μ_1,3-N₃)₂], in which the azido ions display three different bridging modes.     

Hydrogen peroxide disproportionation by the [TPA2Mn2(μ-Cl)2] complex

The dichloride-bridged [TPA₂Mn₂(μ-Cl)₂]²⁺ complex (I) was synthesized as a structural and functional model complex of the chloride-inhibited manganese catalase, and its catalytic properties in MeCN have been studied. Complex I shows sigmoidal kinetics and the activity is significantly inhibited in the presence of water. The kinetic parameters of the hydrogen peroxide disproportionation by complex I have been successfully fitted with non-Michaelis–Menten kinetics of Hill’s equation, which implies a multiple-step substrate activation of complex I. After termination of the catalysis, the mononuclear [TPA₂Mn](ClO₄)₂ was isolated from the solution. During the catalysis, a new penta-coordinate [TPAMnCl](ClO₄) complex (IV), tending to accumulate at a lower ratio of H₂O₂, was isolated and its X-ray crystallographic structure, as well as physical properties, was determined. Transformation of complex I in the presence of different molar ratios of H₂O₂ was studied by UV–Vis, EPR and ESI-MS spectroscopy. Upon addition of H₂O₂, the catalytic solution turned dark green, with instant evolution of oxygen gas, and the electronic spectra obtained were identical to that of the dark green dioxo bridged [TPA₂Mn₂(μ-O)₂](ClO₄)₃ complex (III). When the catalytic solution was subjected to EPR measurement, the transient peaks corresponding to the electronically localized Mn(II) species developed in a short time at lower concentrations of H₂O₂. The signal was more distinctive in the presence of water, and the complex I·H₂O₂ adduct was suggested as the intermediate species based on ESI-MS measurements. The EPR signal corresponding to complex III was detected at higher concentrations (>800 equiv.) of H₂O₂. As possible catalytic intermediates, the [TPA₂Mn^III₂(μ-O)₂]²⁺ and [TPA₂Mn^III₂(μ-O)(μ-OH)]⁺ species were suggested. A possible catalytic mechanism of H₂O₂ disproportionation by complex I, including the formation of active species and termination of the catalysis, has also been suggested.     

Synthesis,structure and catalase activity of the [TPA2Mn2(μ-Cl)2] complex

The dinuclear Mn complex (Et₃NH)₂[TPA₂Mn₂(μ-Cl)₂](ClO₄)₄ (I) was synthesized and characterized. Complex I was obtained from the reaction between MnCl₂ and [H₃TPA](ClO₄)₃ in MeOH. Structural analysis of I showed the two Mn(II) atoms are bridged by two chloride ligands, forming a bis(μ-chloro)dimanganese core. The [Mn₂(μ-Cl)₂]²⁺ core, with a Mn–Mn distance of 3.521(2) Å, is similar to the active site found in chloride-inhibited Mn catalase. EPR and temperature-dependent magnetic susceptibility measurements of complex I showed an antiferromagnetic interaction between the two S = 5/2 Mn centers with an exchange parameter J = −8.8 cm⁻¹. Catalytic activity of H₂O₂ dismutation was measured for complex I and compared with other related complexes. Kinetic parameters of H₂O₂ dismutation were obtained and a possible catalytic mechanism of complex I, related to chloride-inhibited Mn catalase, was suggested.     

Synthesis, Characterization and Crystal Structure of [Na2(APZC)2(μ-H2O)2(μ3-H2O)]n

The synthesis and spectroscopic properties of a Na^＋ complex with ligand 3-aminopyrazine-2-carboxylic acid were described. The resulting complex was characterized by elemental analysis, IR, UV-Vis, NMR spectroscopy and single crystal X-ray diffraction method. The title compound crystallizes in the triclinic system with space group . The crystalline structure of this compound consists of supramolecular architectures involving strong intramolecular N—H…O in pyrazine molecules and intermolecular O—H…N, O—H…O, and N—H…N hydrogen bonds between substituted pyrazine and water molecules.     

Diverse coordination of two ligands in ferromagnetic [Cu(μ-HCO2)2(3-pyOH)]n and [Cu2(μ-HCO2)2(μ-3-pyOH)2(3-pyOH)2(HCO2)2]n

Two novel polynuclear complexes with methanoate anions and 3-hydroxypyridine ligands [Cu(μ-HCO₂)₂(3-pyOH)]_n (1) and [Cu₂(μ-HCO₂)₂(μ-3-pyOH)₂(3-pyOH)₂(HCO₂)₂]_n (2), respectively, were synthesized and characterized. The central copper atom in 1 is surrounded by four methanoates and a 3-pyOH molecule, forming a square-pyramidal CuO₃NO chromophore. All the methanoates are bidentate and serve as bridges between the adjacent copper ions via syn-anti and anti–anti coordination. The basal square coordination axes are formed by O(syn), N(3-pyOH) (1.974(2), 2.016(2) Å) and O(anti), O(anti) (1.945(2), 1.960(2) Å), while the third O(anti) (2.247(2) Å) is on the top of the pyramid. A ferromagnetic transition with an exchange constant 2J/k_B = 9.2 cm⁻¹ is found for 1 below 20 K. This interaction probably takes place through two syn-anti methanoates extended in a chain through the 2D structure. On the other hand, two monoatomic Cu–O–Cu intra-dinuclear asymmetric (1.986(2), 2.415(2) Å) bridges of two methanoates in [Cu₂(HCO₂)₄(3-pyOH)₄] (2) are present. An elongated distorted octahedral coordination sphere around each copper(II) atom is completed by an additional monodentate terminal methanoate (1.975(2) Å), two N-coordinated 3-pyOH (2.005(2), 2.002(2) Å) and the third weakly O-coordinated 3-pyOH (2.732(2) Å). Although a shorter Cu?Cu distance is noticed in 2 than in 1 (4.690(1) Å 1, 3.442(1) Å 2), much weaker ferromagnetism is found in 2.     

Pyridine-2-thione (pySH) derivatives of silver(I): Synthesis and crystal structures of dinuclear [Ag2Cl2(μ-S-pySH)2(PPh3)2] and [Ag2Br2(μ-S-pySH)2(PPh3)2] complexes

Reaction of silver(I) halides with PPh₃ in acetonitrile and then with pyridine-2-thione (pySH) chloroform (1:1:1 molar ratio) has yielded sulfur bridged dimers of general formula, [Ag₂X₂(μ-S-pySH)₂(PPh₃)₂] (X = Cl, 1, Br, 2). Both these complexes have been characterized using analytical data, NMR spectroscopy and single crystal X-crystallography. The central Ag₂S₂ cores form parallelograms with unequal Ag–S bond distances (2.5832(8), 2.7208(11) Å) in 1 and (2.6306(4), 2.6950(7) Å) in 2, respectively. The Ag?Ag contacts of compounds 1 and 2 are 3.8425(8) and 3.8211(4) Å, respectively. The angles around Ag (in the range 87.19(2)–121.71(2)° in 1 and 87.81(2)–121.53(2)° in 2) reveal highly distorted tetrahedral geometry. There are inter dimer π–π stacking interactions between pyridyl rings (inter ring distances of 3.498 and 3.510 Å in complexes 1 and 2, respectively). The solution state ³¹P NMR spectroscopy has shown the existence of both monomers and dimers. The studies reveal relatively weaker intramolecular –NH?Cl hydrogen bonding in case of AgCl vis-à-vis that in CuCl which favored both a monomer and a dimer with AgCl, and only a monomer with CuCl.     

Crystal and molecular structure of tetraaquabarium Di-μ-tartrato-di-μ-hydroxodigermanate(IV) pentahydrate [Ba(H2O)4][Ge2(μ-Tart)2(μ-OH)2] · 5H2O

A new heteronuclear germanium barium complex with D-tartaric acid [Ba(H₂O)₄][Ge₂(μ-Tart)₂(μ-OH)₂]·5H₂O (I) (H₄Tart is tartaric acid) was synthesized. The identity of compound I and its com- position were determined by elemental analysis and X-ray diffraction. The thermal stability of the compound was studied; the coordination centers of the ligand were found from IR spectroscopy. The structure of I was determined by X-ray crystallography. Crystals I are tetragonal: a = 8.5033(2) ?, c = 30.9393(11) ?, V = 2237.10(11) ?³, Z = 4, space group P4₁, R1 = 0.0301 based on 4215 reflections with I > 2σ(I). In crystals I, neutral [Ge₂(μ-Tart)₂] dimers are linked in pairs by double hydroxyl bridges to form {[Ge₂(μ-Tart)₂(μ-OH)₂]²⁻}_∞ polymeric chains. Hydrated Ba²⁺ cations and crystal water molecules are in between the anionic chains. Polymeric complex anions, hydrated barium cations, and H₂O molecules are bound by a system of hydrogen bonds to form a framework.     

Nitrosyl derivatives of the unsaturated dihydrides [Mn2(μ-H)2(CO)6(μ-L2)] (L2 = Ph2PCH2PPh2, (EtO)2POP(OEt)2)

The title dimanganese complexes react with NO (5% in N₂) at room temperature to give as major products the corresponding hexanitrosyl derivatives [Mn₂(NO)₆(μ-L₂)] in moderate yields, and they react rapidly with NO₂ to give the corresponding hydride derivatives [Mn₂(μ-H)(μ-NO₂)(CO)₆(μ-L₂)], these having a nitrite ligand bridging the dimetal centre through the N and O atoms. The dppm-bridged dihydride also reacts selectively at 273 K with (PPN)NO₂ to give first the nitro derivative (PPN)[Mn₂(μ-H)(H)(NO₂)(CO)₆(μ-dppm)], which then transforms into the nitrosyl complex (PPN)[Mn₂(μ-CO)(CO)₅(NO)(μ-dppm)] at room temperature or above (dppm = Ph₂PCH₂PPh₂; PPN⁺ = [N(PPh₃)₂]⁺). The latter anion reacts with (NH₄)PF₆ to give the hydride-bridged nitrosyl complex [Mn₂(μ-H)(μ-NO)(CO)₆(μ-dppm)] and with [AuCl(PPh₃)] to give the trinuclear cluster [AuMn₂(μ-NO)(CO)₆(μ-dppm)(PPh₃)] (Mn-Au = ca. 2.68 Å; Mn-Mn = 2.879(2) Å). Both products are derived from the addition of the added electrophile at the intermetallic bond and rearrangement of the nitrosyl ligand into a bridging position. In contrast, methylation of the anion with CF₃SO₃Me takes place at the nitrosyl ligand to yield the unstable methoxylimide derivative [Mn₂(μ-NOMe)(CO)₆(μ-dppm)]. Analogous reactions at the nitrosyl ligand take place upon the addition of HBF₄·OEt₂ to the nitrosyl-bridged hydrides [Mn₂(μ-H)(μ-NO)(CO)_n(μ-dppm)_m] (n = 6, m = 1; n = 4, m = 2) to give the corresponding hydroxylimide derivatives [Mn₂(μ-H)(μ-NOH)(CO)_n(μ-dppm)_m]BF₄, which were also thermally unstable and could not be isolated nor fully characterized.     

四核铁配合物[Fe4(NTB)4(μ2-O)2(μ4-Suc)](ClO4)6促进DNA水解

四核铁配合物[Fe₄(NTB)₄(μ₂-O)₂(μ₄-Suc)](ClO₄)₆与DNA具有较强的结合作用，结合常数k_{b达(5.9±0.4)×10⁵ L·mol^-1。该多核铁配合物由水解途径促进DNA断裂，在酸性及低离子浓度条件下的促进作用较为显著。动力学分析表明DNA水解没有明显的序列选择性，质粒DNA从超螺旋转变为切口形式符合饱和酶动力学规律，饱和速率常数ksat=0.014 min^-1。}     

Formation of the silylene-bridged complex Fe2(CO)6(μ2-SiCl2)3 from cis-Fe(CO)4(SiCl3)2: an experimental and computational study

Abstract  

Thermolysis of cis-Fe(CO)₄(SiCl₃)₂ results in the formation of the novel compound Fe₂(CO)₆(μ₂-SiCl₂)₃, which was characterized by single crystal X-ray diffraction. Density functional theory calculations were carried out to elucidate possible reaction steps leading to the formation of Fe₂(CO)₆(SiCl₂)₃, including CO dissociation and chlorine abstraction by a SiCl₃ radical generated from homolytic Fe–Si bond cleavage involving a singlet–triplet intersystem crossing.     

Synthesis and molecular structures of the Co3(μ-OOCPh)4(μ,η2-OOCPh)2[OC(Ph)OHNEt3]2 and Co(Hdmpz)2(OOCPh)2 complexes (Hdmpz = 3,5-dimethylpyrazole)

The product of the thermal reaction between cobalt acetate hydrate and benzoic acid reacts with a triethylamine excess to form the trinuclear complex Co₃(μ-OOCPh)₄(μ,η²-OOCPh)₂[OC(Ph)OHNEt₃]₂, and its reaction with 3,5-dimethylpyrazole yields the mononuclear complex Co(Hdmpz)₂(OOCPh)₂. The compound structures are discussed on the basis of X-ray crystallographic data.     

Reaction of the heteronuclear cluster RuOs3(μ-H)2(CO)13 with toluene

The heteronuclear cluster RuOs₃(μ-H)₂(CO)₁₃ (4) reacts with refluxing toluene to form the clusters Ru₂Os₃(μ-H)₂(CO)₁₆ (5) RuOs₃(CO)₉(μ-CO)₂(η⁶-C₆H₅Me) (6) and Ru₂Os₃(CO)₁₂(μ-CO)(η⁶-C₆H₅Me) (7). Cluster 5 exists as a mixture of five isomers. The inter-relationship among the clusters has also been investigated.     

Reactivity of the heteronuclear cluster RuOs3(μ-H)2(CO)13 with indene

The heteronuclear cluster RuOs₃(μ-H)₂(CO)₁₃ (1) reacts with indene under thermal activation to afford the novel clusters RuOs₃(μ-H)(CO)₉(μ-CO)₂(η⁵-C₉H₇) (3), RuOs₃(μ-H)(CO)₉(μ₃,η⁵:η²:η²-C₉H₇) (4) and Ru₂Os₃(μ-H)(CO)₁₁(μ₃,η⁵:η²:η²-C₉H₇) (5), the latter two possessing indenyl ligands in the μ₃,η⁵:η²:η² bonding mode. Cluster 5 exists as a mixture of two isomers. The inter-relationship among the clusters has also been investigated.     

Reactivity of the dinuclear platina-β-diketone [Pt2{(COMe)2H}2(μ-Cl)2] towards chelating ligands - Bridge cleavage versus formation of acetyl(chloro)platinum(II) complexes

The dinuclear platina-β-diketone [Pt₂{(COMe)₂H}₂(μ-Cl)₂] (1) was found to react with 2-(ROCH₂)C₅H₄N (R =  Me, 2a; H, 2b) yielding a cationic mononuclear platina-β-diketone [Pt{(COMe)₂H}{2-(MeOCH₂)C₅H₄N}]Cl (3) and an acetyl(chloro)platinum(II) complex [Pt(COMe)Cl{2-(HOCH₂)C₅H₄N}] (4), respectively. The reaction of 1 with 8-(methylthio)quinoline (5) resulted in the formation of [Pt(COMe)Cl{8-(MeS)C₉H₆N}] (6). The identities of all complexes were established by microanalysis, ¹H, and ¹³C NMR spectroscopy. Single-crystal X-ray diffraction analysis showed 6 to be square-planar platinum(II) complex with N and C atoms as well as Cl and S atoms in mutually trans positions (configuration index: SP-4-2). In accordance with this, quantum chemical calculations on the DFT level of theory revealed a higher stability of complex 6 having a SP-4-2 configuration vs. the analogous complex in SP-4-3 configuration. The distinctly different reactivity of 1 with 2a on the one hand and with 2b and 5 on the other is discussed in terms of the HSAB concept and a deprotonation/reprotonation reaction.     

Ditertiary phosphine derivatives of the heteronuclear cluster RuOs3(μ-H)2(CO)13

The heteronuclear cluster RuOs₃(μ-H)₂(CO)₁₃ (1) reacted readily with a number of ditertiary phosphines under chemical activation with trimethylamine-N-oxide. The solid-state and solution structures of these derivatives have been examined. Six structural types have been characterized crystallographically, including one in which a phenyl group migrates from the ditertiary phosphine ligand to the metal framework. There are many more isomers present in solution, most of which are rapidly inter-converting via hydride migrations.     

Reactivity of [Os3(CO)10(NCMe)2] and [Os3(CO)10(μ-Cl)(μ-AuPPh3)] with 4-mercaptopyridine: X-ray structure of [Os3(CO)10(μ-H)(μ-SC5H4N)] and [Os3(CO)10(μ-AuPPh3)(μ-SC5H4N)]

The compound [Os₃(CO)₁₀(μ-Cl)(μ-AuPPh₃)] (2) was prepared from the reaction between [Os₃(CO)₁₀(NCMe)₂] (1) and [AuClPPh₃] under mild conditions. The reaction of 2 with 4-mercaptopyridine (4-pyS) ligand yielded compounds [Os₃(CO)₁₀(μ-H)(μ-SC₅H₄N)] (4), formed by isolobal replacement of the fragment [AuPPh₃]⁺ by H⁺ and [Os₃(CO)₁₀(μ-AuPPh₃)(μ-SC₅H₄N)] (5). [Os₃(CO)₁₀(μ-H)(μ-SC₅H₄N)] (4) was also obtained by substitution of two acetonitrile ligands in the activated cluster 1 by 4-pyS, at room temperature in dichloromethane. Compounds 2-5 were characterized spectroscopically and the molecular structures of 4 and 5 in the solid state were obtained by single crystal X-ray diffraction studies.