Synthesis of [F]xenon difluoride as a radiolabeling reagent from [F]fluoride ion in a micro-reactor and at production scale

[¹⁸F]Xenon difluoride ([¹⁸F]XeF₂), was produced by treating xenon difluoride with cyclotron-produced [¹⁸F]fluoride ion to provide a potentially useful agent for labeling novel radiotracers with fluorine-18 (t_1/2 = 109.7 min) for imaging applications with positron emission tomography. Firstly, the effects of various reaction parameters, for example, vessel material, solvent, cation and base on this process were studied at room temperature. Glass vials facilitated the reaction more readily than polypropylene vials. The reaction was less efficient in acetonitrile than in dichloromethane. Cs⁺ or K⁺ with or without the cryptand, K 2.2.2, was acceptable as counter cation. The production of [¹⁸F]XeF₂ was retarded by K₂CO₃, suggesting that generation of hydrogen fluoride in the reaction milieu promoted the incorporation of fluorine-18 into xenon difluoride. Secondly, the effect of temperature was studied using a microfluidic platform in which [¹⁸F]XeF₂ was produced in acetonitrile at elevated temperature (≥85 °C) over 94 s. These results enabled us to develop a method for obtaining [¹⁸F]XeF₂ on a production scale (up to 25 mCi) through reaction of [¹⁸F]fluoride ion with xenon difluoride in acetonitrile at 90 °C for 10 min. [¹⁸F]XeF₂ was separated from the reaction mixture by distillation at 110 °C. Furthermore, [¹⁸F]XeF₂ was shown to be reactive towards substrates, such as 1-((trimethylsilyl)oxy)cyclohexene and fluorene.     

Arylation of anilines: formation of diarylamines using diaryliodonium salts

Extensive studies on the reaction of the fluoride ion with diaryliodonium salts demonstrated that this is a generic process for the formation of fluoroarenes and has particular advantages for the preparation of fluorine-18 radiopharmaceuticals. During these studies it became apparent that nucleophiles other than the fluoride ion may be employed for generating substituted aromatics. This approach can be applied, using substituted anilines as the nucleophilic reagent, to the formation of a range of diarylamines in good yield. Optimised conditions for the reaction of a diaryliodonium salt with an aniline utilise TFA as the preferred counter-ion in DMF (130 °C, 24 h).     

Fluorometric determination of fluoride ion by reagent tablets containing 3-hydroxy-2'-sulfoflavone and zirconium(IV) ethylenediamine tetraacetate

A reagent tablet for determination of fluoride ion has been prepared using ethylenediamine-N,N,N′,N′-tetraacetate complex of zirconium (Zr-EDTA), 3-hydroxy-2′-flavone (FS) and an appropriate pH buffer. Dissolving of the tablet into water exhibits an intense blue fluorescence (λ_max = 460 nm) upon excitation at 377 nm and the fluorescence intensity decreases with the presence of fluoride ion. Hence, a simple fluorescent detection procedure for fluoride ion in aqueous media was successfully constructed with this tablet. The principle of this detection system is the ligand exchange reaction of FS bound to Zr-EDTA with fluoride ion. The present system provides an easy, rapid and selective determination method of fluoride ion ranging from 5 × 10⁻⁶ to 1 × 10⁻³ mol dm⁻³. The measurement of real samples with this tablet showed the similar results as those by the common method with the Alfusone reagent.     

Nucleophilic substitution of nitro groups by [F]fluoride in methoxy-substituted ortho-nitrobenzaldehydes—A systematic study

As model reactions for the introduction of [¹⁸F]fluorine into aromatic amino acids, the replacement of NO₂ by [¹⁸F]fluoride ion in mono- to tetra-methoxy-substituted ortho-nitrobenzaldehydes was systematically investigated. Unexpectedly, the highly methoxylated precursors 2,3,4-trimethoxy-6-nitrobenzaldehyde and 2,3,4,5-tetramethoxy-6-nitrobenzaldehyde showed high maximum radiochemical yields (82% and 48% respectively). When the electrophilicity of the leaving group substituted carbon atom is expressed by its ¹³C NMR chemical shift a good correlation with the reaction rate at the beginning of the reaction (first min) was found (R² = 0.89), whereas the maximum radiochemical yields correlated much poorer with this electrophilicity parameter. This may be caused by side reactions becoming influencial in the further reaction course. As possible side reactions the demethylation of methoxy groups and intramolecular redox reactions could be detected by HPLC/MS.     

A ratiometric fluorescent probe for fluoride ion employing the excited-state intramolecular proton transfer

A ratiometric fluorescent probe 1 for fluoride ion was developed based on modulation of the excited-state intramolecular proton transfer (ESIPT) process of 2-(2′-hydroxyphenyl)benzimidazole (HPBI) through the hydroxyl group protection/deprotection reaction. The probe 1 was readily prepared by the reaction of HPBI with tert-butyldimethylsilyl chloride (TBS-Cl) and shows only fluorescence emission maximum at 360 nm. Upon treatment with fluoride in aqueous DMF solution, the TBS protective group of probe 1 was removed readily and ESIPT of the probe was switched on, which resulted in a decrease of the emission band at 360 nm and an increase of a new fluorescence peak around 454 nm. The fluorescent intensity ratio at 454 and 360 nm (I₄₅₄/I₃₆₀) increases linearly with fluoride ion concentration in the range 0.3-8.0 μmol L⁻¹ and the detection limit is 0.19 μmol L⁻¹. The proposed probe shows excellent selectivity toward fluoride ion over other common anions. The method has been successfully applied to the fluoride determination in toothpaste and tap water samples.     

Solid phase extraction-spectrophotometric determination of fluoride in water samples using magnetic iron oxide nanoparticles

A new, sensitive, fast and simple method using magnetic iron oxide nanoparticles (MIONs), as an adsorbent has been developed for extraction, preconcentration and determination of traces of fluoride ions. The determination method is based on the discoloration of Fe(III)-SCN complex with extracted fluoride ions which was subsequently monitored spectrophotometrically at λ_max = 458 nm. Various parameters affecting the adsorption of fluoride by the MIONs have been investigated, such as pH of the solution, type, volume and concentration of desorbing reagent, amount of adsorbent and interference effects. A linear response for the determination of fluoride was achieved in the concentration range of 0.040-1.250 μg mL⁻¹. The limit of detection (LOD) and limit of quantification (LOQ) for fluoride based on 3 times and 10 times the standard deviation of the blank (3S_b, 10S_b) were 0.015 and 0.042 μg mL⁻¹ (n = 20) for fluoride ion, respectively. A preconcentration factor of 50 was achieved in this method. The proposed procedure has been applied for determination of fluoride concentration in various water samples. The results obtained from this method were successfully compared with those provided by standard SPADNS method.     

η-Arene complexes of ruthenium and osmium with pendant donor functionalities

Conversion of 4′-(2,5-dihydrophenyl)butanol or N-trifluoroacetyl-2,5-dihydrobenzylamine with MCl₃·n H₂O (M = Ru, Os) affords the corresponding dimeric η⁶-arene complexes in good to excellent yields. Under similar reaction conditions, the amine functionalized arene precursor 2,5-dihydrobenzylamine yields the corresponding Ru(II) complex. For osmium, HCl induced oxidation leads to formation of [OsCl₆]²⁻ salts. However, under optimized reaction conditions, conversion of the precursor 2,5-dihydrobenzylamine chloride results in clean formation of η⁶-arene Os(II) complex. X-ray structures of [(η⁶-benzyl ammonium)(dmso)RuCl₂] and (2,5-dihydrobenzyl ammonium)₄[OsCl₆]₂confirm the spectroscopic data. High stability towards air and acid as well as enhanced solubility in water is observed for all η⁶-arene complexes.     

Determination of Hg on poly(vinylferrocenium) (PVF)-modified platinum electrode

A new surface based on poly(vinylferrocenium) (PVF⁺)-modified platinum electrode was developed for determination of Hg²⁺ ions in aqueous solutions. The polymer was electrodeposited on platinum electrode by constant potential electrolysis as PVF⁺ClO₄⁻. Cl⁻ ions were then attached to the polymer matrix by anion exchange and the modified electrode was dipped into Hg²⁺ solution. Hg²⁺ was preconcentrated at the polymer matrix by adsorption and also complexation reaction with Cl⁻. Detection of Hg²⁺ was carried out by differential pulse anodic stripping voltammetry (DPASV) after reduction of Hg²⁺. Mercury ions as low as 5 × 10⁻¹⁰ M could be detected with the prepared electrode and the relative standard deviation was calculated as 6.35% at 1 × 10⁻⁶ M concentration (n = 6). Interferences of Ag⁺, Pb²⁺ and Fe³⁺ ions were also studied at two different concentration ratios with respect to Hg²⁺. The developed electrode was applied to the determination of Hg²⁺ in water samples.     

Structure and magnetic properties of the cubic oxide fluoride BaFeO2F

Fluorination of the parent oxide, BaFeO_3−δ, with polyvinylidine fluoride gives rise to a cubic compound with a=4.0603(4) Å at 298 K. ⁵⁷Fe Mössbauer spectra confirmed that all the iron is present as Fe³⁺. Neutron diffraction data showed complete occupancy of the anion sites, indicating a composition BaFeO₂F, with a large displacement of the iron off-site. The magnetic ordering temperature was determined as T_N=645±5 K. Neutron diffraction data at 4.2 K established G-type antiferromagnetism with a magnetic moment per Fe³⁺ ion of 3.95 μ_B. However, magnetisation measurements indicated the presence of a weak ferromagnetic moment that is assigned to the canting of the antiferromagnetic structure. ⁵⁷Fe Mössbauer spectra in the temperature range 10-300 K were fitted with a model of fluoride ion distribution that retains charge neutrality of the perovskite unit cell.     

A new semi-empirical kinetic method for the determination of ion exchange constants for the counterions of cationic micelles

A new method, based upon semi-empirical kinetic approach, for the determination of ion exchange constant for ion exchange processes occurring between counterions at the cationic micellar surface is described in this review article. Basically, the method involves a reaction kinetic probe which gives observed pseudo-first-order rate constants (k_obs) for a nucleophilic substitution reaction between the nonionic and anionic reactants (R and S) in the presence of a constant concentration of both reactants as well as cationic micelles and varying concentrations of an inert inorganic or organic salt (MX). The observed data (k_obs, versus [MX]) fit satisfactorily (in terms of residual errors) to an empirical equation which could be derived from an equation explaining the mechanism of the reaction of the kinetic probe in terms of pseudophase micellar (PM) model coupled with another empirical equation. This (another) empirical equation explains the effect of [MX] on cationic micellar binding constant (K_S) of the anionic reactant (say S) and gives an empirical constant, K_X/S. The magnitude of K_X/S is the measure of the ability of X⁻ to expel S⁻ from a cationic micellar pseudophase to the bulk aqueous phase through ion exchange X⁻/S⁻. The values of K_X/S and K_Y/S (where Y⁻ is another inert counterion) give the ion exchange constant, K_X^Y (= K_X/K_Y where K_X and K_Y represent cationic micellar binding constants of X⁻ and Y⁻, respectively). The suitability of this method is demonstrated by the use of three different reaction kinetic probes and various MX.     

Basic study on the determination of total boron by conversion to tetrafluoroborate ion (BF4) followed by ion chromatography

The basic study on the determination of tetrafluoroborate ion (BF₄⁻) by ion chromatography, and total boron by conversion of boric acid to BF₄⁻ followed by ion chromatography of BF₄⁻ has been carried out. The results of thermodynamic calculations for the system of boric acid (H₃BO₃)-F⁻-H⁺ showed that the mole fraction of BF₄⁻ was higher than 99% at pH lower than 3.5 and 4.5 when the total free fluoride concentration (2[H₂F₂] + 2[HF₂⁻] + [HF] + [F⁻]) was as high as 0.1 and 1.0 M, respectively. The fraction of BF₄⁻ increased with increasing total free fluoride concentration. BF₄⁻ fraction values were higher than 99% at pH 0.75 and at total free fluoride concentration of 0.05 M or higher. BF₄⁻ was hardly formed at pH > 7 even when the total free fluoride concentration was as high as 1.0 M. According to the experimental results, the fraction of BF₄⁻ at pH 0.7-0.8 was 51.2, 95.6 and 96.7% when the total fluoride concentration (2[H₂F₂] + 2[HF₂⁻] + [HF] + [F⁻] + 3[BF₃OH⁻] + 4[BF₄⁻]) was 0.2, 1.0 and 3.3 M, respectively. The formation reaction of BF₄⁻ from boric acid reached an equilibrium state within 20 min regardless of reaction temperature, in the range of 20-50 °C, when the total boron and total fluoride concentrations were 66.7 mM and 1.0 M, respectively. Although BF₄⁻ was formed only under acidic conditions, BF₄⁻, once formed, was very stable under alkaline conditions at least for several hours. We have concluded that BF₄⁻ could be analyzed by ion chromatography using sodium hydroxide solution as an eluent because BF₄⁻ was stable under chromatographic conditions. BF₄⁻ solution prepared from boric acid could be used as a standard solution in the ion chromatographic analysis of BF₄⁻ instead of the sodium tetrafluoroborate (NaBF₄) reagent available commercially, if a discrepancy of about 4-5% was allowed.     

Electrochemiluminescence immunosensor for ultrasensitive detection of biomarker using Ru(bpy)3-encapsulated silica nanosphere labels

Here, we describe a new approach for electrochemiluminescence (ECL) assay with Ru(bpy)₃²⁺-encapsulated silica nanoparticle (SiO₂@Ru) as labels. A water-in-oil (W/O) microemulsion method was employed for one-pot synthesis of SiO₂@Ru nanoparticles. The as-synthesized SiO₂@Ru nanoparticles have a narrow size distribution, which allows reproducible loading of Ru(bpy)₃²⁺ inside the silica shell and of α-fetoprotein antibody (anti-AFP), a model antibody, on the silica surface with glutaraldehyde as linkage. The silica shell effectively prevents leakage of Ru(bpy)₃²⁺ into the aqueous solution due to strong electrostatic interaction between the positively charged Ru(bpy)₃²⁺ and the negatively charged surface of silica. The porous structure of silica shell allowed the ion to move easily through the pore to exchange energy/electrons with the entrapped Ru(bpy)₃²⁺. The as-synthesized SiO₂@Ru can be used as a label for ultrasensitive detection of biomarkers through a sandwiched immunoassay process. The calibration range of AFP concentration was 0.05-30 ng mL⁻¹ with linear relation from 0.05 to 20 ng mL⁻¹ and a detection limit of 0.035 ng mL⁻¹ at 3σ. The resulting immunosensors possess high sensitivity and good analytical performance.     

Preparation and optical properties of SrF2:Eu nanospheres

SrF₂:Eu³⁺ nanospheres with homogeneous diameter have been synthesized by a microemulsion-mediated hydrothermal method for the first time, in which quaternary microemulsion of CTAB/water/cyclohexane/n-pentanol was used. The possible reaction mechanism and the luminescent properties of SrF₂:Eu³⁺ nanospheres were also investigated in this paper. The morphology and grain sizes of final products were characterized by field emission scanning electron microscopy and transmission electron microscopy, indicating that most of the products were nanospheres with an average diameter of ∼50 nm. Room-temperature emission spectra, recorded under 394-nm excitation, showed that the transition of ⁵D₀ → ⁷F₁ emission be dominating in SrF₂:Eu³⁺ nanospheres. From the dependence of the luminescence intensity on the concentration of Eu³⁺ ions, the optimal dopant concentration is 2 mol%.     

Dibenzyltin(IV) complexes of the 5-[(E)-2-(aryl)-1-diazenyl]quinolin-8-olates: Synthesis and an investigation of structures by X-ray diffraction, solution and solid-state tin NMR, Sn Mössbauer and electrospray ionization MS

A series of cis-bis{5-[(E)-2-(aryl)-1-diazenyl]quinolinolato}dibenzyltin(IV) complexes have been synthesized by reacting sodium salts of 5-[(E)-2-(aryl)-1-diazenyl]quinolin-8-ol (LH) and dibenzyltin dichloride. These complexes have been characterized by ¹H, ¹³C, ¹¹⁹Sn NMR, ESI-MS in solution and by IR and ^119mSn Mössbauer, ¹¹⁷Sn CP-MAS NMR spectroscopy in solid state. In addition, the structures of three of the dibenzyltin(IV) complexes, viz., Bz₂Sn(L²)₂ (2), Bz₂Sn(L³)₂ (3), and Bz₂Sn(L⁵)₂ (5) (L = 5-[(E)-2-(aryl)-1-diazenyl]quinolin-8-ol: aryl = 4′-methylphenyl- (L²H), 4′-methoxylphenyl- (L³H) and 4′-bromophenyl- (L⁵H)) were determined by single-crystal X-ray diffraction. In general, the complexes were found to adopt a distorted cis-octahedral arrangement around the tin atom in both solution and solid state.     

Photoluminescence of new red phosphor SrZnO2:Eu

SrZnO₂:Eu³⁺ has been synthesized by solid-state reaction and its photoluminescence in ultraviolet (UV)-vacuum ultraviolet (VUV) range was investigated. The broad bands around 254 nm are assigned to CT band of Eu³⁺-O²⁻. With the increasing of Eu³⁺ concentration, Eu³⁺ could occupy different sites, which leads to the broadening of CT band. A sharp band is observed in the region of 110-130 nm, which is related to the host absorption. The phosphors emit red luminescence centered at about 616 nm due to Eu³⁺⁵D₀→⁷F₂ both under 254 and 147 nm, but none of Eu²⁺ blue emission can be observed.     

Palladium-catalyzed homocoupling of aryl halides in the presence of fluoride

This report describes the fluoride-mediated homocoupling of aryl iodides and bromides catalyzed by palladium(0). This coupling protocol is tolerant of electron-donating and electron-withdrawing substitutents on the aryl halide, as well as ortho substitution. Optimum reaction conditions entail 10 mol% Pd(dba)₂, 3 equiv of tetrabutyl ammonium fluoride (TBAF) in DMF at 90 °C.     

Strontium(II)-selective electrode based on a macrocyclic tetraamide

A new PVC membrane electrode based on 5,7,12,14-dibenzo-2,3,9,10-tetraoxa-1,4,8,11-tetraazacyclotetradecane (I) as an ion carrier, o-nitrophenyloctyl ether (o-NPOE) as solvent mediator and sodium tetraphenylborate (NaTPB) as lipophilic additive was fabricated and investigated as Sr²⁺-selective electrode. The best performance was exhibited by the membrane having composition 8:200:4:120 (I:o-NPOE:NaTPB:PVC). The electrode exhibited a Nernstian response for strontium ion over a wide concentration range 3.98 × 10⁻⁶ to 1.0 × 10⁻¹ M with a slope of 29.0 ± 0.1 mV/decade of concentration and a detection limit of 2.82 × 10⁻⁶ M. It showed a response time of less than 10 s and could be used for at least 3 months without any divergence in potential. The proposed electrode showed a good discriminating ability towards strontium(II) ion over a wide variety of other metal ions including alkali, alkaline earth, transition, and heavy metal ions. The electrode can be used in the pH range of 2.5-10.5 and in mixtures containing up to 35% (v/v) non-aqueous content. It was used as an indicator electrode in potentiometric titration of strontium ion against EDTA.     

Co(III) complexes of the type [(L)Co(O2CO)] (L = tripodal tetraamine ligand): Synthesis,structure, DFT calculations and Co NMR

The syntheses and characterisation of the Co(III) complexes [(L)Co(O₂CO)]ClO₄ (L = a tripodal tetraamine ligand = baep, abap, uns-penp, dppa, trpn) are reported. Geometric isomers are possible for all but the trpn complex, owing to the non-equivalence of the three arms on the tripodal ligand, and both NMR and X-ray crystallography are used to identify the single isomer formed. X-ray crystal structures of the complexes [(L)Co(O₂CO)]ClO₄ · xH₂O (L = baep, x = 0.5; L = abap, x = 0; L = uns-penp, x = 1; L = dppa, x = 0; L = trpn, x = 1) are reported; little variation is observed in the geometry of the carbonate chelate ring while significant lengthening of bonds and expansion of angles involving the cobalt ion occurs as the number of six-membered chelate rings in the complex cations increases. ⁵⁹Co NMR chemical shift data for the complexes show the expected linear relationship between λ_max, the wavelength of the lowest energy d–d transition, and γ, the magnetogyric ratio of the ⁵⁹Co nucleus. An excellent correlation between Δ, the d orbital splitting parameter, and δ(⁵⁹Co) also exists for these complexes. Rate data for the acid hydrolysis of [(L)Co(O₂CO)]⁺ (L = uns-penp, dppa) in 1.0 M HClO₄ differ by two orders of magnitude, and this is attributed to the differing steric accessibility of the endo O atoms in each complex. DFT calculations on the complexes reproduce the isomeric preferences, UV–Vis and ⁵⁹Co NMR spectroscopic data well, provided that solvent effects are included.     

Effects of partial anion substitution on the thermoelectric properties of silver(I) chalcogenide halides in the system Ag5Q2X with Q=Te, Se and S and X=Br and Cl

A selection of mixed conducting silver chalcogenide halides of the general formula Ag₅Q₂X with Q=sulfur, selenium and tellurium and X=chlorine and bromine has been investigated due to their thermoelectric properties. Recently, the ternary counterpart Ag₅Te₂Cl showed a defined d¹⁰-d¹⁰ interaction in the disordered cation substructure at elevated temperatures where Ag₅Te₂Cl is present in its high temperature α-phase. A significant drop of the thermal diffusivity has been observed during the β−α phase transition reducing the values from 0.12 close to 0.08 mm² s⁻¹. At the same transition the thermopower reacts on the increasing silver mobility and jumps towards less negative values.Thermal conductivities, thermopower and thermal diffusivity of selected compounds with various grades of anion substitution in Ag₅Q₂X were determined around the silver-order/disorder β−α phase transition. A formation of attractive interactions could be observed for selenium substituted phases while no effect was detected for bromide and sulfide samples. Depending on the grade and type of substitution the thermopower changes significantly at and after the β−α phase transition. Thermal conductivities are low reaching values around 0.2-0.3 W m⁻¹ K⁻¹ at 299 K. Partial anion exchange can substantially tune the thermoelectric properties in Ag₅Q₂X phases.     

Syntheses, crystal structures and Raman spectra of Ba(BF4)(PF6), Ba(BF4)(AsF6) and Ba2(BF4)2(AsF6)(H3F4); the first examples of metal salts containing simultaneously tetrahedral BF4 and octahedral AF6 anions

In the system BaF₂/BF₃/PF₅/anhydrous hydrogen fluoride (aHF) a compound Ba(BF₄)(PF₆) was isolated and characterized by Raman spectroscopy and X-ray diffraction on the single crystal. Ba(BF₄)(PF₆) crystallizes in a hexagonal space group with a=10.2251(4) Å, c=6.1535(4) Å, V=557.17(5) Å³ at 200 K, and Z=3. Both crystallographically independent Ba atoms possess coordination polyhedra in the shape of tri-capped trigonal prisms, which include F atoms from BF₄⁻ and PF₆⁻ anions. In the analogous system with AsF₅ instead of PF₅ the compound Ba(BF₄)(AsF₆) was isolated and characterized. It crystallizes in an orthorhombic Pnma space group with a=10.415(2) Å, b=6.325(3) Å, c=11.8297(17) Å, V=779.3(4) Å³ at 200 K, and Z=4. The coordination around Ba atom is in the shape of slightly distorted tri-capped trigonal prism which includes five F atoms from AsF₆⁻ and four F atoms from BF₄⁻ anions. When the system BaF₂/BF₃/AsF₅/aHF is made basic with an extra addition of BaF₂, the compound Ba₂(BF₄)₂(AsF₆)(H₃F₄) was obtained. It crystallizes in a hexagonal P6₃/mmc space group with a=6.8709(9) Å, c=17.327(8) Å, V=708.4(4) Å³ at 200 K, and Z=2. The barium environment in the shape of tetra-capped distorted trigonal prism involves 10 F atoms from four BF₄⁻, three AsF₆⁻ and three H₃F₄⁻ anions. All F atoms, except the central atom in H₃F₄ moiety, act as μ₂-bridges yielding a complex 3-D structural network.