Copper(II) complexes of tetradentate N2S2 donor sets: Synthesis,crystal structure characterization and reactivity

Two mononuclear and one dinuclear copper(II) complexes, containing neutral tetradentate NSSN type ligands, of formulation [Cu^II(L¹)Cl]ClO₄ (1), [Cu^II(L²)Cl]ClO₄ (2) and [Cu^II₂(L³)₂Cl₂](ClO₄)₂ (3) were synthesized and isolated in pure form [where L¹ = 1,2-bis(2-pyridylmethylthio)ethane, L² = 1,3-bis(2-pyridylmethylthio)propane and L³ = 1,4-bis(2-pyridylmethylthio)butane]. All these green colored copper(II) complexes were characterized by physicochemical and spectroscopic methods. The dinuclear copper(II) complex 3 changed to a colorless dinuclear copper(I) species of formula [Cu^I₂(L³)₂](ClO₄)₂,0.5H₂O (4) in dimethylformamide even in the presence of air at ambient temperature, while complexes 1 and 2 showed no change under similar conditions. The solid-state structures of complexes 1, 2 and 4 were established by X-ray crystallography. The geometry about the copper in complexes 1 and 2 is trigonal bipyramidal whereas the coordination environment about the copper(I) in dinuclear complex 4 is distorted tetrahedral.     

Coordination behavior of 3,4-bis(2-pyridylmethylthio)toluene with copper(II) ions: Synthesis,structural characterization and reactivity,and DNA binding study of the dinuclear copper(II) complex

On reaction of different copper(II) salts with 3,4-bis(2-pyridylmethylthio)toluene (L) having neutral tetradentate NSSN donor set in different chemical environments, two mononuclear copper(II), one dinuclear copper(I) and one dinuclear copper(II) complexes, formulated as [Cu^II(L)(H₂O)₂](NO₃)₂ (1), [Cu^II(pic)₂] (2), [Cu^I₂(L)₂](ClO₄)₂ (3) and [Cu^II₂(L)₂Cl₂](ClO₄)₂ (4), respectively, were isolated in pure form [where pic = picolinate]. All the complexes were characterized by physicochemical and spectroscopic methods. The product of the reactions are dependent on the counter anion of copper(II) salts used as reactant and on the reaction medium. Complexes 1 and 4 were obtained with nitrate and perchlorate copper(II) salts, respectively. On the other hand, C–S bond cleavage was observed in the reaction of L with copper(II) chloride to form in situ picolinic acid and complex 2. Dinuclear complexes 3 and 4 were separated out when copper(II) perchlorate was allowed to react with L in methanol and in acetonitrile, respectively, under aerobic condition. The X-ray diffraction analysis of the dinuclear complex 3 shows a highly distorted tetrahedral geometry about each copper ion. Complex 4 is converted to 3 in acetonitrile in presence of catechol. The spectral study of complex 4 with calf thymus DNA is indicative of a groove binding mode interaction.     

Rhodium-carbonyl complexes with a quinolyl functionalized Cp-ligand: synthesis and photochemical activation

Dicarbonyl[η⁵-2,3,4,5-tetramethyl-1-(8-quinolyl)cyclopentadienyl]rhodium(I) (1) was prepared by the reaction of [Rh(CO)₂Cl]₂ with 2,3,4,5-tetramethyl-1-(8-quinolyl)cyclopentadienyl-potassium. Irradiation of 1 in chloroform or dichloromethane as solvent leads to the formation of dichloro[η⁵-2,3,4,5-tetramethyl-1-(8-quinolyl)cyclopentadienyl]rhodium(III) (2). When Rh₆(CO)₁₆ is present, the cluster adds to the 8-quinolyl-cp-rhodium fragment and the compound [η⁵-2,3,4,5-tetramethyl-1-(8-quinolyl)cyclopentadienyl]rhodium-di-μ-carbonyl-hexarhodiumtetradecacarbonyl (3) is formed in 65% yield. The coordination sphere of the rhodium(III) atom in compound 2 and of the rhodium(I) atom in 3 is completed by a coordination of the quinolyl moiety. This was revealed by NMR spectroscopy as well as by X-ray analyses.     

Chains,helices, sheets and unusual 3D nets: Diverse structures of the flexible,ditopic ligand 1,2-bis(3-(4-pyridyl)pyrazolyl)ethane

The flexible ditopic ligand 1,2-bis(3-(4-pyridyl)pyrazol-1-yl)ethane (L^4Et) displays remarkable versatility in the complexes that it forms with transition metals with products ranging from 1D chains to interpenetrating 3D networks. The L^4Et ligand itself crystallises in the space group P2₁, adopting a helical twist, although it is found in a variety of other conformations in its complexes. Coordination polymers containing the L^4Et ligand vary from almost straight, parallel 1D chains of [Ag₂(L^4Et)₂(ClO₄)₂(DMF)]·DMF (1), through interdigitating helical complexes containing tetrahedral Zn(II), [Zn(NCS)₂(L^4Et)]·DMF·H₂O (2) to 2D sheets of [Cu(L^4Et)₂(H₂O)₂](PF₆)₂·xH₂O (3) and the three-fold interpenetrating 3D network of [Co(L^4Et)₂(NCS)₂] (4). The 3D network adopts an unusual 3D 4-connected dmp (6⁵.8) topology. Dimensionality can be limited by the use of chelating co-ligands, demonstrated by the formation of the dinuclear complex [{Cu(py-2,6-CO₂)(H₂O)}₂(L^4Et)] (5).     

Construction of optically active multimetallic systems of rhodium(I), palladium(II), and ruthenium(II) with a P-chiral tetraphosphine ligand

The treatment of optically P-chiral tetraphosphine, (3S,6R,9R,12S)-6,9-di-tert-butyl-2,2,3,12,13,13-hexamethyl-3,6,9,12-tetraphosphatetradecane (1), with rhodium(I), palladium(II), and ruthenium(II) complex precursors led to the selective formation of mono-, di-, or trinuclear homo- or heterometallic complexes, [Rh(1)]SbF₆ (4), [{Rh(nbd)}₂(1)](SbF₆)₂ (3), [{Pd(η³-allyl)}₂(1)](SbF₆)₂ (5), [{RuCl(η⁵-C₅(CH₃)₅)}₂(1)] (6), and [{RuCl₂(η⁶-benzene)}₂(PdCl₂)(1)] (8). These complexes were characterized by NMR and X-ray crystallographic analysis.     

Synthesis and structures of (3-methyl-2-pyridyl)diphenylphosphane derivatives of metal clusters

An unsymmetric bidentate ligand (3-methyl-2-pyridyl)diphenylphosphane (P(Mepy)Ph₂) is able to react with various tetranuclear transition metal clusters such as HRuCo₃(CO)₁₂, HRuRh₃(CO)₁₂ and Rh₄(CO)₁₂. The synthesis and crystal structures of HRuCo₃(CO)₁₀(P(Mepy)Ph₂) (1), HRuRh₃(CO)₁₀(P(Mepy)Ph₂) (2), RuRh₂(CO)₉(P(Mepy)Ph) (3) and Rh₆(CO)₁₄(P(Mepy)Ph₂) (4) are described. In 1, 2 and 4 the phosphane ligand replaces the carbonyls and acts as a bridging bidentate P-N group. The formation of 3 includes degradation of both the metal cluster core and the ligand itself. One of the P-C bonds in the ligand is cleaved and the ligand caps a metal triangle with a bridging phosphido group together with the nitrogen donor. The reaction between dinuclear Rh₂(CO)₄Cl₂ and P(Mepy)Ph₂ gives a binuclear Rh₂(μ-CO)Cl₂(P(Mepy)Ph₂)₂ (5) with bridging ligands in a head-to-tail arrangement. The crystal structure is also given.     

Coordination properties of N2S (1,5-bis(3,5-dimethyl-1-pyrazolyl)-3-thiapentane) or N2S2 (1,8-bis(3,5-dimethyl-1-pyrazolyl)-3,6-dithiaoctane or 1,2-bis[3-(3,5-dimethyl-1-pyrazolyl)-2-thiapropyl]benzene) donor ligands toward Rh(I)

The 1,5-bis(3,5-dimethyl-1-pyrazolyl)-3-thiapentane ligand (bdtp) reacts with [Rh(COD)(THF)₂][BF₄] to give [Rh(COD)(bdtp)][BF₄] ([1][BF₄]), which is fluxional in solution on the NMR time scale. Its further treatment with carbon monoxide leads to a displacement of the 1,5-cyclooctadiene ligand, generating a mixture of two complexes, namely, [Rh(CO)₂(bdtp)][BF₄] ([2][BF₄]) and [Rh(CO)(bdtp-κ³N,N,S)][BF₄] ([3][BF₄]). In solution, [2][BF₄] exists as a mixture of two isomers, [Rh(CO)₂(bdtp-κ²N,N)]⁺ ([2a]⁺) and [Rh(CO)₂(bdtp-κ³N,N,S)]⁺ ([2b]⁺; major isomer) rapidly interconverting on the NMR time scale. At room temperature, [2][BF₄] easily loses one molecule of carbon monoxide to give [3][BF₄]. The latter is prone to react with carbon monoxide to partially regenerate [2][BF₄]. The ligands 1,2-bis[3-(3,5-dimethyl-1-pyrazolyl)-2-thiapropyl]benzene (bddf) and 1,8-bis(3,5-dimethyl-1-pyrazolyl)-3,6-dithiaoctane (bddo) are seen to react with two equivalents of [Rh(COD)(THF)₂][BF₄] to give the dinuclear complexes [Rh₂(bddf)(COD)₂][BF₄]₂ ([4][BF₄]₂) and [Rh₂(bddo)(COD)₂][BF₄]₂ ([5][BF₄]₂), respectively. In such complexes, the ligand acts as a double pincer holding two rhodium atoms through a chelation involving S and N donor atoms. Bubbling carbon monoxide into a solution of [4][BF₄]₂ results in loss of the COD ligand and carbonylation to give [Rh₂(bddf)(CO)₄][BF₄]₂ ([6][BF₄]₂). The single-crystal X-ray structures of [3][CF₃SO₃], [5][BF₄]₂ and [6][BF₄]₂ are reported.     

Heterometallic cyanide-bridged complexes containing RhRuRh triad: NMR data on exchange reactions and ligand effect transmission

Trans-[RuPy₄(CN)₂ cleaves chloro-rhodium bridges in rhodium(I) binuclear complexes, [Rh(CO)₂Cl]₂, [Rh(Cod)Cl]₂, and [(Cod)RhCl₂Rh(CO)₂] yielding heterometallic triad complexes, [(CO)₂ClRh(NC)RuPy₄(CN)RhCl(CO)₂] (I), [(Cod)ClRh(NC)RuPy₄(CN)RhCl(Cod)] (II), and [(Cod)ClRh(NC)RuPy₄(CN)RhCl(CO)₂] (III), respectively. In solutions, III coexists with equilibrium amounts of I and II in the near-binomial proportions. Under action of [Rh(CO)₂Cl]₂, II transforms into I with parallel formation of [Rh(Cod)Cl]₂. Ligand effect transmission along the L-Rh-NC-Ru-CN-Rh-L′ chain is studied by ¹H and ¹³C NMR. Chemical shifts δ¹H and δ¹³C of Ru-bound Py ligands are sensitive to the nature of Rh-bound ligands. Values of δ¹H and δ¹³C of Cod and ¹³C of CO ligands are sensitive to the ligands at the remote end of the L-Rh-NC-Ru-CN-Rh-L′ chain. Reaction of trans-[RuPy₄(CN)₂] with Rh₂(OAc)₄ yields an apparently linear polymer [-Rh(OAc)₄Rh-NCRuPy₄CN-]. Upon action of [Rh(CO)₂Cl]₂, the polymer decomposes yielding I and Rh₂(OAc)₄. X-ray structure data for I are given.     

Mono- and dinuclear Pd(II) complexes of different salicylaldimine ligands as catalysts of transfer hydrogenation of nitrobenzene with cyclohexene and Suzuki-Miyaura coupling reactions

In this study, the synthesis, spectroscopic, catalytic, and electrochemical properties of salicylaldimine Schiff-base ligands (L_n) and their dinuclear Pd(II) complexes for L₁ and L₂ ligands with mononuclear Pd(II) complexes for L₃ and L₄ ligands were investigated. The ligands and their mono- or dinuclear Pd(II) complexes were characterized by FT-IR, UV-Vis, ¹H NMR and elemental analysis, as well as through magnetic susceptibility and spectroelectrochemical techniques. The catalytic studies showed that the introduction of tert butyl groups on the salicyl ring of the molecules increased the catalytic activity towards hydrogenation of nitrobenzene and cyclohexene in DMF at 25 and 45 °C. It was also observed that the steric hindered mono- and dinuclear Pd(II) complexes were thermally stable complexes and were not sensitive to air or the moisture. The complexes were easily prepared from cheap materials that could be used as versatile and efficient catalysts for different C-C coupling reactions (Suzuki-Miyaura reactions).     

Synthesis and coordination properties of palladium(II) and platinum(II) complexes with phosphonated triphenylphosphine derivatives

Two triphenylphosphine derivatives, diethyl [4-(diphenylphosphanyl)benzyl]phosphonate (3a) and tetraethyl {[5-(diphenylphosphanyl)-1,3-phenylene]dimethylene}bis(phosphonate) (3b), and also the corresponding free acids 4a and 4b were prepared. These ligands were characterized by ¹H, ¹³C and ³¹P NMR spectroscopy and mass spectrometry. A full set of their Pd(II) and Pt(II) complexes of the general formula [MCl₂L₂] and one dinuclear complex trans-[Pd₂Cl₄(3a)₂] were synthesized and their isomerization behaviour in solution was studied. The complexes were characterized by ¹H, ¹³C, ³¹P and ¹⁹⁵Pt NMR spectroscopy, mass spectrometry and far-IR spectroscopy. The X-ray structures of all complexes with 3a or 3b have usual slightly distorted square-planar geometry on the metal ion. Salts of phosphonic acids 4a and 4b and their complexes are freely soluble in aqueous solution; therefore, they can be potentially useful in aqueous or biphasic catalysis.     

Synthesis and characterization of mercury(II) complexes with 2-styryl-1,3-benzothiazole (sb). Presence of two differently coordinated Hg(II) ions in the dinuclear complex Hg2Cl4(sb)3. Structural characterization of 2-styryl-1,3-benzothiazole and some of its derivatives

The molecular and crystal structures of the following compounds 2-styryl-1,3-benzothiazole, sb, (1), Hg₂Cl₄(sb)₃ (2), 1,3-bis(1,3-benzothiazol-2-yl)-2,4-diphenylcyclobutane (3) 1,3-bis(1,3-benzothiazol-2-yl)-2,4-bis(4-chlorophenyl)cyclobutane (4) and HgBr₂(sb)₂ (5) were determined by single-crystal X-ray diffractometry. The crystal structure of 1 consists of discrete sb molecules which are essentially planar. The dimeric molecules of 3 and 4 are characterized by a cyclobutane ring. In both isolated complexes 2 and 5, sb acts as a neutral monodentate ligand coordinated to the mercury atom through the thiazolyl nitrogen atom. The dinuclear complex 2 is characterized by the unique example of two differently coordinated Hg(II) ions bridged via a non-symmetrical linear Cl⁻ bridge. The first one is coordinated by one terminal and one bridging Cl⁻ ion and two thiazolyl nitrogen atoms in the form of distorted tetrahedron. The second one is bonded to two terminal Cl⁻ ions and the bridging Cl⁻ ion and one thiazolyl nitrogen atom in a 2+2 manner. In complex 5 the Hg(II) ion, which is situated on a crystallographic twofold axis, is tetrahedrally coordinated by two Br⁻ ions and two thiazolyl nitrogen atoms. Both complexes are characterized by stronger mercury-to-halide covalent bonds than mercury-to-nitrogen bonds, which are regarded as contacts shorter than the van der Waals radii sum of the corresponding atoms. The geometry of the sb ligand in both complexes 2 and 5 has not been changed remarkably from that one in the uncoordinated state due to not so strong bonds formation with the Hg(II) ion.     

Trifluoroacetylacetonate rhodium(III) methyl complexes, cis-[Rh(TFA)(PPh3)2(CH3)(L)][BPh4] and cis-[Rh(TFA)(PPh3)2(CH3)(I)] (L = CH3CN, NH3, pyridine), in comparison with their acetylacetonate analogs

The oxidative addition of CH₃I to planar rhodium(I) complex [Rh(TFA)(PPh₃)₂] in acetonitrile (TFA is trifluoroacetylacetonate) leads to the formation of cationic, cis-[Rh(TFA)(PPh₃)₂(CH₃)(CH₃CN)][BPh₄] (1), or neutral, cis-[Rh(TFA)(PPh₃)₂(CH₃)(I)] (4), rhodium(III) methyl complexes depending on the reaction conditions. 1 reacts readily with NH₃ and pyridine to form cationic complexes, cis-[Rh(TFA)(PPh₃)₂(CH₃)(NH₃)][BPh₄] (2) and cis-[Rh(TFA)(PPh₃)₂(CH₃)(Py)][BPh₄] (3), respectively. Acetylacetonate methyl complex of rhodium(III), cis-[Rh(Acac)(PPh₃)₂(CH₃)(I)] (5), was obtained by the action of NaI on cis-[Rh(Acac)(PPh₃)₂(CH₃)(CH₃CN)][BPh₄] in acetone at −15 °C. Complexes 1-5 were characterized by elemental analysis, ³¹P{¹H}, ¹H and ¹⁹F NMR. For complexes 2, 3, 4 conductivity data in acetone solutions are reported. The crystal structures of 2 and 3 were determined. NMR parameters of 1-5 and related complexes are discussed from the viewpoint of their isomerism.     

Synthesis of mono- and binuclear dioxomolybdenum(VI) complexes derived from N(4)-substituted thiosemicarbazones: X-ray crystal structures of [(MoO2L)2], [MoO2Lpy] and [MoO2Lpy]

Four molybdenum(VI) thiosemicarbazonato complexes have been synthesized and characterized. The dinuclear complexes [(MoO₂L¹)₂] (1) and [(MoO₂L²)₂] (3) have been prepared by the reaction of [MoO₂(acac)₂] with 2-hydroxyacetophenone N(4)-cyclohexyl (H₂L¹) and N(4)-phenyl (H₂L²) thiosemicarbazones in alcoholic medium. Mononuclear dioxomolybdenum(VI) complexes of the type [MoO₂L¹py] (2) and [MoO₂L²py] (4) have been prepared by the reaction of 1 or 3 with pyridine (py) in alcoholic medium. In all the complexes, molybdenum is coordinated by two terminal oxo-oxygen atoms, (O_t), oxygen, nitrogen and sulfur atoms from the principal ligand and by an oxygen atom from the second unit in 1, and by a nitrogen atom from pyridine in complexes 2 and 4. All complexes have been spectroscopically characterized. The molecular structures of complexes 1, 2 and 4 have been determined by the single crystal X-ray diffraction method.     

Stabilization of the labile metal configuration in halfsandwich complexes [CpRh(PN)Hal]X

PN ligands 3 and 4, derived from 2-diphenylphosphanylmethylpyridine 2a, were synthesized, to which in the backbone a tether to a cyclopentadiene system and for comparison an ⁱPr substituent were attached. The chiral compounds were resolved by introduction of a menthoxy substituent into the 2-position of the pyridine system and/or palladium complexes with enantiomerically pure co-ligands. The tripod ligand 3b contains three different binding sites (Cp, P, N) connected by a resolved chiral carbon atom. (S_C)-configuration of this tripod ligand enforces (R_Rh)-configuration at the metal atom in the halfsandwich rhodium complex (L_Ment,S_C,R_Rh)-7b. The opposite metal configuration is inaccessible. Substitution of the chloro ligand in (L_Ment,S_C,R_Rh)-7b by halide (Br, I) or pseudohalide (N₃, CN, SCN) ligands occurs with retention of configuration to give complexes 8b-11b. However, in the reaction of (L_Ment,S_C,R_Rh)-7b with PPh₃ the pyridine arm of the tripod ligand in compound 13b becomes detached from the metal atom. In the Cp*Rh and CpRh compounds of the bidentate PN ligands 4a and 4b both metal configurations are accessible and in complexes 14a-17a and 14b-17b they equilibrate fast. The stereochemical assignments are corroborated by 9 X-ray analyses.     

Reaction of [M(CO)4] (M = Ir, Rh) with cyclopropenyl tetrafluoroborate - Ring opening and coupling of cyclopropenyl ligands to form dinuclear metal complexes

Reaction of the iridium tetracarbonylate [PPN][Ir(CO)₄] (1a) with triphenylcyclopropenyl tetrafluoroborate [C₃Ph₃][BF₄] afforded two dinuclear species Ir₂(CO)₄(μ,η¹:η²-C₃Ph₃)(μ,η²:η³-C₃Ph₃) (2) and Ir₂(CO)₄(μ,η⁴:η⁴-C₆Ph₆) (3a) resulting from the ring opening and in the latter case, coupling of the resulting acyclic, propenyl ligands. The analogous reaction with [PPN][Rh(CO)₄] (1b) afforded only the rhodium analogue for 3a.     

Study of complexes of platinum group metals containing nitrogen bases derived from pyridine aldehydes: Interesting molecular structures with unpredicted bonding modes of the ligands

A series of mono-cationic dinuclear half sandwich ruthenium, rhodium and iridium metal complexes have been synthesized using ((pyridin-2-yl)methylimino)nicotinamide (L1) and ((picolinamido)phenyl)picolinamide (L2) ligands: [(η⁶-arene)₂Ru₂(μ-L1)Cl₃]⁺ (arene = C₆H₆, 1; p-ⁱPrC₆H₄Me, 2; C₆Me₆, 3), [(η⁵-C₅Me₅)₂M₂(μ-L1)Cl₃]⁺ (M = Rh, 4; Ir, 5), and [(η⁶-arene)₂Ru₂(μ-L2)(μ-Cl)]⁺ (arene = C₆H₆, 6; p-ⁱPrC₆H₄Me, 7; C₆Me₆, 8), [(η⁵-C₅Me₅)₂M₂(μ-L2)Cl₂]⁺ (M = Rh, 9; Ir, 10). All the complexes have been isolated as their hexafluorophosphate salts and fully characterized by use of a combination of NMR and IR spectroscopy. The solid state structure of three representatives 4, 6 and 9 has been determined by X-ray crystallographic studies. Interestingly, in the molecular structure of 4, the first metal is bonded to two nitrogen atoms whereas the second metal center is coordinated to only one nitrogen atom with two terminal chloride ligands. Fascinatingly in the case of the complexes with the symmetrical ligand L2, both ruthenium centers having η⁶-arene groups are bonded to nitrogen atoms with a bridging chloride atom between the two metal centers, whereas the metals with η⁵-Cp∗ groups are bonded to the ligand N,O and N,N fashion.     

Structural studies of phosphor-1,1-diselenoato Mn(I) and Re(I) complexes

Mononuclear complexes of the type, M(CO)₄[Se₂P(OR)₂] (M = Mn, R = ⁱPr, 1a; Et, 1b; M = Re, R = ⁱPr, 3a; Et, 3b) can be prepared from either [-Se(Se)P(OⁱPr)₂]₂ (A) or [Se{-Se(Se)P(OEt)₂}₂] (B) with M(CO)₅Br. O,O′-dialkyl diselenophosphate ([(RO)₂PSe₂]^-, abbreviated as dsep) ligands generated from A and B act as a chelating ligand in these complexes. Upon refluxing in acetonitrile, these mononuclear complexes yield dinuclear complexes with a general formula of [M₂(CO)₆{Se₂P(OR)₂}₂] (M = Mn, R = ⁱPr, 2a; Et, 2b; M = Re, R = ⁱPr, 4a; Et, 4b). Dsep ligands display a triconnective, bimetallic bonding mode in the dinuclear compounds and this kind of connective pattern has never been identified in any phosphor-1,1-diselenoato metal complexes. Compounds 2b, 3b, and 4 are structurally characterized. Compounds 2b and 3b display weak, secondary Se?Se interactions in their lattices.     

Ag(I) and Pd(II) complexes of a 1,3-dibenzhydryl substituted benzannulated N-heterocyclic carbene: Unexpected rearrangement, structures and catalytic studies

Reaction of the sterically bulky 1,3-dibenzhydrylbenzimidazolium bromide (Bh₂-bimyH⁺Br⁻) (A) with Pd(OAc)₂ in DMSO yielded a mono(carbene) Pd(II) complex 1 with a N-bound benzimidazole derivative, which resulted from an unusual NHC rearrangement reaction. Reaction of A with Ag₂O, on the other hand, cleanly gave the Ag(I) carbene complex [AgBr(Bh₂-bimy)] (2), which has been used as a carbene-transfer agent to prepare the acetonitrile complex trans-[PdBr₂(CH₃CN)(Bh₂-bimy)] (3). Dissociation of acetonitrile from complex 3 and subsequent dimerization afforded the dinuclear Pd(II) complex [PdBr₂(Bh₂-bimy)]₂ (4) in quantitative yield. All complexes were fully characterized by multinuclear NMR spectroscopies, ESI mass spectrometry and X-ray diffraction analysis. Furthermore, the catalytic activity of complex 4 in aqueous Suzuki-Miyaura cross-coupling reactions was studied and compared with that of its previously reported less bulky analogue [PdBr₂(ⁱPr₂-bimy)]₂.     

Soluble {[Rh2(μ-OOCCH3)2(dbbpy)2][BF4]}n molecular wire and [Rh2(μ-OOCCH3)2(dbbpy)2L2] complexes; dbbpy = 4,4′-di-tert-butyl-2,2′-bipyridine: Synthesis and physicochemical characterization

Binuclear Rh(II) compounds [Rh₂(μ-OOCCH₃)₂(dbbpy)₂(H₂O)₂](CH₃COO)₂ (1) (dbbpy = 4,4′-di-tert-butyl-2,2′-bipyridine), [Rh₂(μ-OOCCH₃)₂(dbbpy)₂(H₂O)₂](BF₄)₂·H₂O·CH₃CN (2), [Rh₂(CH₃COO)₂(C₁₈H₂₄N₂)₂(CH₃CN)₂](BF₄)₂·4CH₃CN (3) and {[Rh₂(μ-OOCCH₃)₂(dbbpy)₂][BF₄]}_n (4) have been synthesized and characterized with spectroscopic methods. Structure of complex 3 has been determined using X-ray crystallography. Rhodium atoms in compound 3 have distorted octahedral coordination with O and N atoms in equatorial positions and Rh atom and CH₃CN molecule in axial coordination sites. Reduction of rhodium(II) compounds with aqueous 2-propanol leads to the formation of polymetallic compound {[Rh₂(μ-OOCCH₃)₂(dbbpy)₂][BF₄]}_n (4) containing [Rh₂]³⁺ core. Compound 4 shows strong antiferromagnetic properties, μ = 0.18–1.73 M.B. in the range 1.8–300 K, J = −597 cm⁻¹. Electrochemistry of compounds 3 and 4 in CH₃CN has been investigated. Compound 4 exhibits a poorly reversible oxidation system at E_1/2 = −0.92 V (ΔE_p = 0.19 V) and in solution in DMF is slowly oxidized to 3 even in total absence of oxygen. Complex 3 is irreversibly oxidized to Rh(III) compound at E_pa = 1.48 V and irreversibly reduced at E_pc = −1.02 V to lead to the unstable polynuclear complex 4 in CH₃CN.     

Preparation,NMR studies and crystal structure of mononuclear and dinuclear Pd(II) and Pt(II) complexes that contain 1,2-bis[3-(3,5-dimethyl-1-pyrazolyl)-2-thiapropyl]benzene

The reaction between 1,2-bis[3-(3,5-dimethyl-1-pyrazolyl)-2-thiapropyl]benzene (bddf) and [MCl₂(CH₃CN)₂] (M = Pd(II), Pt(II)) in a 1:1 M/L ratio in CH₂Cl₂ or acetonitrile solution, respectively, gave the complexes trans-[MCl₂(bddf)] (M = Pd(II) (1), Pt(II) (4)), and in a 2:1 M/L ratio led to [M₂Cl₄(bddf)] (M = Pd(II) (2), Pt(II) (5)). Treatment of 1 and 4 with AgBF₄ and NaBPh₄, respectively, gave the compounds [Pd(bddf)](BF₄)₂ (3) and [Pt(bddf)](BPh₄)₂ (6). When complexes 3 and 6 were heated under reflux in a solution of Et₄NBr in CH₂Cl₂/CH₃OH (1:1) for 24 h, analogous complexes to 1 and 4 with bromides instead of chlorides bonded to the metallic centre were obtained. These complexes were characterised by elemental analyses, conductivity measurements, infrared, ¹H, ¹H{¹⁹⁵Pt}, ¹³C{¹H}, ¹⁹⁵Pt{¹H} NMR, HSQC and NOESY spectroscopies. The X-ray crystal structure of the complex [Pd(bddf)](BF₄)₂ · H₂O has been determined. The metal atom is tetracoordinated by the two azine nitrogen atoms of the pyrazole rings and two thioether groups.