Synthesis and structural characterization of cobalt(II) and zinc(II) complexes with 2-(indazol-1-yl)-2-thiazoline (TnInA). X-ray characterization of [CoCl2(TnInA)2] · C2H6O and [(M)(TnInA)2(H2O)2](NO3)2 (M = Co, Zn)

Several complexes of 2-(indazol-1-yl)-2-thiazoline (TnInA) with the divalent ions Co and Zn have been synthesized by the direct combination of the ligand and the metal chloride or nitrate hydrated salts in ethanol. These complexes have been characterized by a variety of physical–chemical techniques. Moreover, the structures of [CoCl₂(TnInA)₂] · C₂H₆O (1) and [(M)(TnInA)₂(H₂O)₂](NO₃)₂ (M = Co, 3; Zn, 4) were determined by single-crystal X-ray diffraction. In all the complexes, the ligand TnInA bonds to the metal ion through the indazole and thiazoline nitrogen atoms. In complex 1 the environment around the cobalt ion may be described as a distorted octahedron with two TnInA ligands and two chlorine ligands. Compounds 3 and 4 are isostructural with a distorted octahedral geometry around the metal center, being linked to two water molecules and two TnInA ligands. However, in complex [ZnCl₂(TnInA)] (2) the zinc atom is four-coordinated with a probable tetrahedral environment with two chloro ligands and one TnInA ligand bonded to the metal ion.     

Group 4 metallacarboranes of constrained geometries derived from B(cage)- and C(cage)-silylamido-substituted carborane ligands: a synthetic and structural investigation

The reactions of RNHSi(Me)₂Cl (1, R=t-Bu; 2, R=2,6-(Me₂CH)₂C₆H₃) with the carborane ligands, nido-1-Na(C₄H₈O)-2,3-(SiMe₃)₂-2,3-C₂B₄H₅ (3) and Li[closo-1-R′-1,2-C₂B₁₀H₁₀] (4), produced two kinds of neutral ligand precursors, nido-5-[Si(Me)₂N(H)R]-2,3-(SiMe₃)₂-2,3-C₂B₄H₅, (5, R=t-Bu) and closo-1-R′-2-[Si(Me)₂N(H)R]-1,2-C₂B₁₀H₁₀ (6, R=t-Bu, R′=Ph; 7, R=2,6-(Me₂CH)₂C₆H₃, R′=H), in 85, 92, and 95% yields, respectively. Treatment of closo-2-[Si(Me)₂NH(2,6-(Me₂CH)₂C₆H₃)]-1,2-C₂B₁₀H₁₁ (7) with three equivalents of freshly cut sodium metal in the presence of naphthalene produced the corresponding cage-opened sodium salt of the “carbons apart” carborane trianion, [nido-3-{Si(Me)₂N(2,6-(Me₂CH)₂C₆H₃)}-1,3-C₂B₁₀H₁₁]³⁻ (8) in almost quantitative yield. The reaction of the trianion, 8, with anhydrous MCl₄ (M=Ti and Zr) in 1:1 molar ratio in dry tetrahydrofuran (THF) at −78 °C, resulted in the formation of the corresponding half-sandwich neutral d⁰-metallacarborane, closo-1-M[(Cl)(THF)_n]-2-[1′-η¹σ-N(2,6-(Me₂CH)₂C₆H₃)(Me)₂Si]-2,4-η⁶-C₂B₁₀H₁₁ (M=Ti (9), n=0; M=Zr (10), n=1) in 47 and 36% yields, respectively. All compounds were characterized by elemental analysis, ¹H-, ¹¹B-, and ¹³C-NMR spectra and IR spectra. The carborane ligand, 7, was also characterized by single crystal X-ray diffraction. Compound 7 crystallizes in the monoclinic space group P2₁/c with a=8.2357(19) Å, b=28.686(7) Å, c=9.921(2) Å; β=93.482(4)°; V=2339.5(9) ų, and Z=4. The final refinements of 7 converged at R=0.0736; wR=0.1494; GOF=1.372 for observed reflections.     

Synthesis, structure and properties of delocalized transition metal chelates: Diazoketiminato chelates of Co(III) and Pt(II)

The reactions of HL 1 [where HL is 1N-(2-pyridyl-2-methyl)-2-arylazoaniline and is formulated as ArN = NC₆H₄N(H)(CH₂C₅H₄N); Ar = C₆H₅ (for HL¹) or p-MeC₆H₄ (for HL²) or p-ClC₆H₄ (for HL³)] with K₂PtCl₄ and Co(ClO₄)₃ · 6H₂O afforded the (L)PtCl and [(L)₂Co]ClO₄ complexes, respectively. The HL ligands bind the platinum(II) and cobalt(III) centres in a tridentate (N,N,N) fashion, forming new diazoketiminato chelates upon dissociating the amino proton. The X-ray structures of (L³)PtCl and [(L³)₂Co]ClO₄ were determined. Redox properties of the new complexes have been examined.     

Preparation and characterization of ruthenium(II), rhodium(III) and iridium(III) complexes of isocyanide bearing the azo group

Reactions of [(η⁶-arene)RuCl₂]₂ (1) (η⁶-arene=p-cymene (1a), 1,3,5-Me₃C₆H₃ (1b), 1,2,3-Me₃C₆H₃ (1c) 1,2,3,4-Me₄C₆H₂(1d), 1,2,3,5-Me₄C₆H₂ (1e) and C₆Me₆ (1f)) or [Cp*MCl₂]₂ (M=Rh (2), Ir (3); Cp*=C₅Me₅) with 4-isocyanoazobenzene (RNC) and 4,4′-diisocyanoazobenzene (CN–R–NC) gave mononuclear and dinuclear complexes, [(η⁶-arene)Ru(CNC₆H₄N=NC₆H₅)Cl₂] (4a–f), [Cp*M(CNC₆H₄N=NC₆H₅)Cl₂] (5: M=Rh; 6: M=Ir)_, [{(η⁶-arene)RuCl₂}₂{μ-CNC₆H₄N=NC₆H₄NC}] (8a–f) and [(Cp*MCl₂)₂(μ-CNC₆H₄N=NC₆H₄NC)}] (9: M=Rh; 10: M=Ir)_, respectively. It was confirmed by X-ray analyses of 4a and 5 that these complexes have trans-forms for the ---N=N--- moieties. Reaction of [Cp*Rh(dppf)(MeCN)](PF₆)₂ (dppf=1,1′-bis (diphenylphosphino)ferrocene) with 4-isocyanoazobenzene gave [Cp*Rh(dppf)(CNC₆H₄N=NC₆H₅)](PF₆)₂ (7), confirmed by X-ray analysis. Complex 8b reacted with Ag(CF₃SO₃), giving a rectangular tetranuclear complex 11b, [{(η⁶-1,3,5-Me₃C₆H₃)Ru(μ-Cl}₄(μ-CNC₆H₄N=NC₆H₄NC)₂](CF₃SO₃)₄ bridged by four Cl atoms and two μ-diisocyanoazobenzene ligands. Photochemical reactions of the ruthenium complexes (4 and 8) led to the decomposition of the complexes, whereas those of 5, 7, 9 and 10 underwent a trans-to-cis isomerization. In the electrochemical reactions the reductive waves about −1.50 V for 4 and −1.44 V for 8 are due to the reduction of azo group, [---N=N---]→[---N=N---]²⁻. The irreversible oxidative waves at ca. 0.87 V for the 4 and at ca. 0.85 V for 8 came from the oxidation of Ru(II)→Ru(III).     

New mono and binuclear mercury(II) complexes of phosphorus ylides containing DMSO as ligand: Spectral and structural characterization

Reaction of phosphorus ylides Ph₃PCHC(O)C₆H₄NO₂ (Y′) and (p-tolyl)₃PCHC(O)C₆H₄Cl (Y″) with HgX₂ (X = Cl, Br and I) in equimolar ratios using methanol as solvent leads to binuclear products. The bridge-splitting reaction of binuclear complex [(Y″) · HgI₂]₂ by DMSO yields the mononuclear complex [(Y″) · HgI₂ · DMSO]. This bridge-splitting reaction can be also a method for the synthesis of mononuclear products. C-coordination of ylides and O-coordination of DMSO are demonstrated by single crystal X-ray analyses of binuclear complexes of [(Y′) · HgI₂]₂ and [(Y″) · HgI₂]₂ and mononuclear complex of [(Y″) · HgI₂ · DMSO]. Characterization of the obtained compounds was also performed by elemental analysis, IR, ¹H, ³¹P, and ¹³C NMR. Theoretical studies on Hg(II) complexes of Y′ show that the cis-like isomers are about 4–12 kcal/mol less stable than the trans-like structures and the relative energy of cis- and trans-like isomers significantly depends on the size of the bridging halide. These studies on mercury complexes of Y″ show that, formation of mononuclear complexes in DMSO solution in which DMSO acts as a ligand, energetically is more favorable than that of binuclear complexes.     

Cyano-bridged bimetallic complexes of copper(II) with tetracyanonickelate(II). Crystal structure of [Cu(dpt)Ni(CN)4]

Five new complexes of composition [Cu(dpt)Ni(CN)₄] (1) (dpt=dipropylenetriamine), [Cu(dien)Ni(CN)₄]·2H₂O (2) (dien=diethylenetriamine), [Cu(N,N′-dimeen)Ni(CN)₄]·H₂O (3) (N,N′-dimeen=N,N′-dimethylethylenediamine), [Cu(N,N-dimeen)Ni(CN)₄]·H₂O (4) (N,N-dimeen=N,N-dimethylethylenediamine) and [Cu(trimeen)Ni(CN)₄] (5) (trimeen=N,N,N′-trimethylethylenediamine) have been obtained by the reactions of the mixture of Cu(ClO₄)₂·6H₂O, appropriate amine and K₂[Ni(CN)₄] in water and have been characterized by IR and UV–Vis spectroscopies and magnetic measurements. The crystal structure of [Cu(dpt)Ni(CN)₄] (1) has been determined by single-crystal X-ray analysis. The structure of 1 consists of a one-dimensional polymeric chain ---Cu(dpt)---NC---Ni(CN)₂---CN---Cu(dpt)--- in which the Cu(II) and Ni(II) atoms are linked by CN groups. The nickel atom is four coordinate with four cyanide-carbon atoms (two cyano groups are terminal and two cyano groups (in cis fashion) are bridged) in a square-planar arrangement and the copper atom is five coordinate with two cyanide-nitrogen and three dpt-nitrogen atoms, in a distorted square-pyramidal arrangement. The temperature dependence of magnetic susceptibility (2–300 K) was measured for compound 1. The magnetic investigation showed the presence of a very weak antiferromagnetic interaction (J=−0.16 cm⁻¹) between the copper atoms within each chain through the diamagnetic Ni(CN)₄ ²⁻ ions.     

Assembly of molecular squares and helical chain polymers of Mo(W)/Cu/S clusters using thiolato ligands as linkers

Reactions between thiomolybdate or thiotungstate [Et₄N]₂[MS₄] (M = Mo, W) and CuSBu^t led to the formation of two novel Mo(W)/Cu/S clusters [Et₄N]₄[{MS₄Cu₂(μ-SBu^t)}₄] (1, M = Mo; 2, M = W). Single-crystal X-ray diffraction studies reveal that 2 is the first example of a molecular square containing CuS₂WS₂Cu building blocks. The reactions of [Et₄N]₂[MS₄] with CuCl followed by the addition of K₂SSS (SSS = 1,3,4-thiadiazole-2,5-dithiolate) yielded novel polymers {[Et₄N]₂[MS₄Cu₂(SSS)]}_n (3, M = Mo; 4, M = W). Crystal structure determination shows that the CuS₂WS₂Cu building blocks in the anion of 4 are bridged by SSS²⁻ ligands to produce a helical chain running down the crystallographic b axis.     

Synthesis and structure of ansa-cyclopentadienyl pyrrolyl titanium complexes: [(η-C5H4)CH2(2-C4H3N)]Ti(NMe2)2 and [1,3-{CH2(2-C4H3N)}2(η-C5H3)]Ti(NMe2)

Reaction of ansa-cyclopentadienyl pyrrolyl ligand (C₅H₅)CH₂(2-C₄H₃NH) (2) with Ti(NMe₂)₄ affords bis(dimethylamido)titanium complex [(η⁵-C₅H₄)CH₂(2-C₄H₃N)]Ti(NMe₂)₂ (3) via amine elimination. A cyclopentadiene ligand with two pendant pyrrolyl arms, a mixture of 1,3- and 1,4-{CH₂(2-C₄H₃NH)}₂C₅H₄ (4), undergoes an analogous reaction with Ti(NMe₂)₄ to give [1,3-{CH₂(2-C₄H₃N)}₂(η⁵-C₅H₃)]Ti(NMe₂) (5). Molecular structures of 3 and 5 have been determined by single crystal X-ray diffraction studies.     

Ring-opening metathesis polymerization of norbornene and norbornadiene by tungsten(II) and molybdenum(II) complexes

The reaction of norbornene (NBE) and norbornadiene (NBD) in the presence of seven-coordinate tungsten(II) and molybdenum(II) complexes of the [(CO)₄M(μ-Cl)₃M(SnCl₃)(CO)₃] and [MCl(M′Cl₃)(CO)₃(NCMe)₂] (M=W, Mo; M′=Sn, Ge) types leads to ring-opening metathesis polymerization (ROMP) and to the formation of high molecular weight polymers. The geometric structure of these polymers was determined by means of ¹H- and ¹³C-NMR spectroscopy. The monitoring of the reaction between cyclic olefins and the metal complex by means of ¹H-NMR spectroscopy allowed us to observe the coordination of NBD to metal atoms in the initiation step of the polymerization process. Compounds of the [MCl(SnCl₃)(CO)₃(η⁴-NBD)] type prepared directly from [(CO)₄M(μ-Cl)₃M(SnCl₃)(CO)₃] or [MCl(M′Cl₃)(CO)₃(NCMe)₂] (M=W, Mo) in the presence of an excess of NBD initiate the ROMP reaction immediately. The detection of the first-formed products in the reaction between the metal complex and cyclic olefins provides valuable information concerning the nature of the initiating species.     

Synthesis and characterization of uranium(III) compounds supported by the hydrotris(3,5-dimethyl-pyrazolyl)borate ligand: Crystal structures of [U(Tp)2(X)] complexes (X = OC6H2-2,4,6-Me3, dmpz, Cl)

Reaction of [U(Tp^Me2)₂(NR₂)] (R = Ph, SiMe₃) with protic substrates such as 2,4,6-trimethylphenol (HOC₆H₂-2,4,6-Me₃), 3,5-dimethylpyrazole (Hdmpz), 2-mercaptopyridine (HSC₅H₄N) and phenylacetylene (HCCPh) afforded the corresponding [U(Tp^Me2)₂(OAr)] (Ar = C₆H₂-2,4,6-Me₃) (1), [U(Tp^Me2)₂(dmpz)] (2), [U(Tp^Me2)₂(η²-SC₅H₄N)] (3), and [U(Tp^Me2)₂(CCPh)] (4) compounds. Reaction of [U(Tp^Me2)₂(NR₂)] with Me₃SnCl or Me₃SiBr gave [U(Tp^Me2)₂Cl] (5) and [U(Tp^Me2)₂Br] (6), respectively, in high yield. The amido precursors failed to react with cyclopentadiene, but metathesis of [U(Tp^Me2)₂I] with NaCp yielded [U(κ³-Tp^Me2)(κ²-Tp^Me2)(η⁵-Cp)] (7). Thermolysis of 7 resulted in oxidation of the metal centre and redistribution of the ligands, giving [UCp₃(dmpz)] (8), pyrazabole (9) and [U(Tp^Me2)(dmpz)₃] (10). The complexes have been fully characterized by spectroscopic methods and the structures of 1, 2, and 5 were confirmed by X-ray crystallographic studies. In the solid state the complexes exhibit distorted pentagonal bipyramidal geometries.     

2-(Phenyltelluromethyl)tetrahydrofuran (L) and 2-(2-{4-methoxyphenyl}telluroethyl)-1,3- dioxolane (L) and their palladium(II) and platinum(II) complexes

The nucleophile [ArTe⁻] generated in situ borohydride solution of Ar₂Te₂, reacts with 2-(chloromethyl) tetrahydrofuran and 2-(2-bromoethyl)-1,3-dioxolane resulting in L¹ and L², respectively. The complexes of palladium(II) and platinum(II) with L¹/L² having stoichiometries [MCl₂·L₂], [ML₂](ClO₄)₂, [(DPPE)ML₂](ClO)₄)₂, [(PPh₃)₂ML₂](ClO₄)₂ and [(phen)ML₂](ClO₄)₂ (where L = L¹/L² DPPE = Ph₂PC H₂CH₂PPh₂, PHEN = 1,10-phenanthroline and M = Pd/Pt) have been synthesized. IR, ¹H, ¹²⁵Te{¹H} and ³¹P{¹H} NMR and UV-vis spectral data of these species in conjunction with their molar conductance and molecular weight data have been used to authenticate the new species. In all complexes (1–20) the ligands L¹ and L² are coordinated through tellurium and in the complexes of formula [ML₂](ClO₄)₂ (M = Pd, Pt) the ligand is bidentate with the oxygen atom used in complexation. In solution, complexes PtCl₂L₂ exist as a mixture of cis and trans isomers whereas only the trans isomer was observed for the palladium analogues. The [(phen)PdL₂](ClO₄)₂(Q) quenches ¹O₂ readily. The plot of log [Q] vs time is linear. Mechanism compatible with the experimental observations is proposed.     

Synthesis of metallocenes of zirconium, hafnium, manganese, iron, tin, lead and half-sandwich complexes of rhodium and iridium containing the ligands (η-C5R4CR′2PMe2), where R and R′ may be H or Me

The dimethylphosphino substituted cyclopentadienyl precursor compounds [M(C₅Me₄CH₂PMe₂)], where M=Li⁺ (1), Na⁺ (2), or K⁺ (3), and [Li(C₅H₄CR′₂PMe₂)], where R′₂=Me₂ (4), or (CH₂)₅ (5), [HC₅Me₄CH₂PMe₂H]X, where X⁻=Cl⁻ (6) or PF₆⁻ (7) and [HC₅Me₄CH₂PMe₂] (8), are described. They have been used to prepare new metallocene compounds, of which representative examples are [Fe(η-C₅R₄CR′₂PMe₂)₂], where R=Me, R′=H (9); R=H and R′₂=Me₂ (10), or (CH₂)₅ (11), [Fe(η-C₅H₄CMe₂PMe₃)₂]I₂ (12), [Fe{η-C₅Me₄CH₂P(O)Me₂}₂] (13), [Zr(η-C₅R₄CR′₂PMe₂)₂Cl₂], where R=H, R′=Me (14), or R=Me, R′=H (15), [Hf(η-C₅H₄CMe₂PMe₂)₂]Cl₂] (16), [Zr(η-C₅H₄CMe₂PMe₂)₂Me₂] (17), {[Zr(η-C₅Me₄CH₂PMe₂)₂]Cl}{(C₆F₅)₃BClB(C₆F₅)₃} (18), [Zr{(η-C₅Me₄CH₂PMe₂)₂Cl₂}PtI₂] (19), [Mn(η-C₅Me₄CH₂PMe₂)₂] (20), [Mn{(η-C₅Me₄CH₂PMe₂B(C₆F₅)₃}₂] (21), [Pb(η-C₅H₄CMe₂PMe₂)₂] (23), [Sn(η-C₅H₄CMe₂PMe₂)₂] (24), [Pb{η-C₅H₄CMe₂PMe₂B(C₆F₅)₃}₂] (25), [Pb(η-C₅H₄CMe₂PMe₂)₂PtI₂] (26), [Rh(η-C₅Me₄CH₂PMe₂)(C₂H₄)] 29, [M(η,κP-C₅Me₄CH₂PMe₂)I₂], where M=Rh (30), or Ir, (31).     

Structural, spectral and antimicrobial studies of copper(II) complexes of 2-benzoylpyridine N(4)-cyclohexyl thiosemicarbazone

Six new copper(II) complexes of 2-benzoylpyridine N(4)-cyclohexyl thiosemicarbazone (HL) have been synthesized and characterized by different physicochemical techniques like molar conductivity measurements, magnetic studies and electronic, infrared and EPR spectral studies. Five of the complexes have been found to possess the stoichiometry [CuLX], where X = Cl (1), Br (2), NO₃ (3), NCS (4), N₃ (5). The complex prepared from copper sulfate has the composition [Cu₂L₂SO₄] · (H₂O)₂ (6). In all the complexes the deprotonated ligand, L and the anion were found to be coordinated to the Cu(II) ion. The terdentate nature of the ligand is evident from the IR spectra. The metal ligand bonding parameters evaluated from the EPR spectra indicate strong in-plane σ and in-plane π bonding. The magnetic and spectroscopic data indicate a square planar geometry for complexes 1, 3, 4 and 5, while the complexes 2 and 6 are assigned a square pyramidal geometry. Crystal structure of the complex [CuLCl] reveals two molecules per asymmetric unit of a monoclinic lattice, with space group symmetry P2₁/n. The complexes [ CuLBr ₂] (2) and [CuLNCS] (4) crystallized into triclinic lattices with space group . Compound 2 exists as a thiolate bridged copper(II) dimer. The antimicrobial activity of the ligand and the copper complexes were tested against five types of bacteria isolated from clinical samples. The complexes were found to be active against Bacillus sp., Vibrio cholera O1, Staphylococcus aurus and Salmonella paratyphi.     

Synthesis of titanium(IV) complexes that contain the Bis(silylamide) ligand of the type [1,8-C10H6(NR)2], and alkene polymerization catalyzed by [1,8-C10H6(NR)2]TiCl2-cocatalyst system

[1,8-C₁₀H₆(NR)₂]TiCl₂ (3; R=SiMe₃, SiⁱBuMe₂, SiⁱPr₃) complexes have been prepared from dilithio salts [1,8-C₁₀H₆(NR)₂]Li₂ (2) and TiCl₄ in diethyl ether in moderate yields (60–63%). These complexes showed significant catalytic activities for ethylene polymerization and for ethylene/1-hexene copolymerization in the presence of methylaluminoxane (MAO), methyl isobutyl aluminoxane (MMAO), AlⁱBu₃– or AlEt₃–Ph₃CB(C₆F₅)₄ as a cocatalyst. The catalytic activities performed in heptane (cocatalyst MMAO) were higher than those carried out in toluene (cocatalyst MAO): 709 kg-PE/mol-Ti·h could be attained for ethylene polymerization by using [1,8-C₁₀H₆(NSiⁱBuMe₂)₂]TiCl₂–MMAO catalyst system.     

Another example of carborane based trianionic ligand: Syntheses and catalytic activities of cyclohexylamino tailed ortho-carboranyl zirconium and titanium dicarbollides

In situ reaction of Li[closo-1-Ph-1,2-C₂B₁₀H₁₀] with 7-azabicyclo [4.1.0] heptane results in the formation of the disubstituted carborane, closo-1-Ph-2-(2′-aminocyclohexyl)-1,2-C₂B₁₀H₁₀ (1), in 63% yield. Decapitation of (1) with potassium hydroxide in refluxing ethanol produces the cage-opened nido-carborane, K[nido-7-Ph-8-(2′-aminocyclohexyl)-7,8-C₂B₉H₁₀]⁻ (2), in 80% yield. Deprotonation of the above monoanion with two equivalents of n-butyllithium followed by reaction with anhydrous MCl₄ · 2THF (M = Zr, Ti) provides d⁰-half-sandwich metallocarboranes, closo-1-M(Cl)-2-Ph-3-(2′-σ-(H)N-cyclohexyl)-2,3-η⁵-C₂B₉H₉ (3 M = Zr; 4 M = Ti) in 53% and 42% yields, respectively. The reaction of Li[closo-1,2-C₂B₁₀H₁₁] with 7-azabicyclo [4.1.0] heptane in THF affords closo-1-(2′-aminocyclohexyl)-1,2-C₂B₁₀H₁₀ (5) in 59% yield. Immobilization of the carboranyl amino ligand (1) to an organic support, Merrifield’s peptide resin (1%), has been achieved by the reaction of the sodium salt of (5) with polystyryl chloride in THF to produce closo-1-(2′-aminocyclohexyl)-2-polystyryl-1,2-C₂B₁₀H₁₀ (6) in 87% yield. Further reaction of the dianion derived from (6) with anhydrous ZrCl₄ · 2THF led to the formation of the organic polystyryl supported d⁰-half-sandwich metallocarborane, closo-1-Zr(Cl)-2-(2′-σ-(H)N-cyclohexyl)-3-polystyryl-2,3-η⁵-C₂B₉H₉ (7), in 38% yield. These new compounds have been characterized by elemental analyses, NMR, and IR spectra. Polymerizations of both ethylene and vinyl chloride with (3) and (7) have been performed in toluene using MMAO-7 (13% ISOPAR-E) as the co-catalyst. Molecular weights up to 32.8 × 10³ (M_w/M_n = 1.8) and 9.5 × 10³ (M_w/M_n = 2.1) were obtained for PE and PVC, respectively.     

Thermal decomposition study on mixed ligand thymine complexes of divalent nickel(II) with dianions of some dicarboxylic acids

Thermal decomposition of mixed ligand thymine (2,4-dihydroxy-5-methylpyrimidine) complexes of divalent Ni(II) with aspartate, glutamate and ADA (N-2-acetamido)iminodiacetate dianions was monitored by TG, DTG and DTA analysis in static atmosphere of air. The decomposition course and steps of complexes [Ni(C₅H₆N₂O₂)(C₄H₅NO₄)²⁻(H₂O)₂]·H₂O, [Ni(C₅H₆N₂O₂)(C₅H₇NO₄)²⁻(H₂O)₂]·H₂O and [Ni(C₅H₆N₂O₂)(C₆H₈N₂O₅)²⁻(H₂O)₂]·1.5H₂O were analyzed. The final decomposition products are found to be the corresponding metal oxides. The kinetic parameters namely, activation energy (E*), enthalpy (ΔH*), entropy (ΔS*) and free energy change of decomposition (ΔG*) are calculated from the TG curves using Coats–Redfern and Horowitz–Metzger equations. The stability order found for these complexes follows the trend aspartate > ADA > glutamate.     

Synthesis and crystal structures of two new Cd(II) complexes with 3-(2-pyridy)pyrazole-based ligand: influence of anions

Two new Cd(II) complexes with a 3-(2-pyridyl)pyrazole-based ligand, [Cd(L)₂(SCN)₂] (1) and {[Cd(L)₂N₃](ClO₄)}_n (2) (L=3-(2-pyridyl)pyrazol-1-ylmethylbenzene) were synthesized and structurally characterized by elemental analyses, IR and single crystal X-ray diffraction analysis. Complex 1 crystallizes in the monoclinic system, space group C2/c, with a=14.833(3), b=13.790(3), c=15.970(3) Å, β=110.89(3)° and Z=4, while 2 crystallizes in the monoclinic system, space group P2₁/c, with a=13.622(4), b=23.286(7), c=10.547(3) Å, β=111.084(6)° and Z=4. In the two complexes, the Cd(II) centers are coordinated by six nitrogen atoms, in which four from two distinct L ligands and two from thiocyanato (1) or azido (2) anions. Complex 1 has a mononuclear structure, whereas 2 has a 1D chain structure bridged by azido anions. In 2, the azido adopts a μ-1,3-trans coordination mode, which is not common in the azide Cd(II) complexes. In addition, in the structure of 2, the 1D chains were further assembled into a quasi-3D supramolecular network by the C–HO hydrogen-bonding interactions. The structural difference of the two complexes is attributable to the different anions, which have different coordination natures.     

Synthesis and magnetism of the first tetranuclear copper(II)–iron(III) complexes of macrocyclic oxamides

Four novel tetranuclear macrocyclic complexes of the formula [(CuLⁱ)₃Fe](ClO₄)₃·3H₂O (i=1–4, Lⁱ are the dianions of the [14]N₄ and [15]N₄ macrocyclic oxamides, namely 2,3-dioxo-5,6:13,14-dibenzo-7,12-bis(ethoxycarbonyl)-1,4,8,11-tetraazacyclotetradeca-7,11-diene, 2,3-dioxo-5,6:13,14-dibenzo-9-methyl-7,12-bis(ethoxycarbonyl)-1,4,8,11-tetraazacyclotetradeca-7,11-diene and 2,3-dioxo-5,6:14,15-dibenzo-7,13-bis(ethoxycarbonyl)-1,4,8,12-tetraazacyclotetradeca-7,12-diene] have been prepared and characterized. These complexes are the first examples of oxamido-bridged Cu(II)–Fe(III) heterometallic species. Cryomagnetic studies on [(CuL¹)₃Fe](ClO₄)₃·3H₂O (1) and [(CuL³)₃Fe](ClO₄)₃·3H₂O (3) (77–300 K) revealed that the Cu(II) and Fe(III) ions interact antiferromagnetically through the oxamido bridge, with the exchange integral J=−30.8 cm⁻¹ for 1 and J=−28.7 cm⁻¹ for 3 based on . The interaction parameters have been compared with that of the related [Cu₃Mn] compound.     

Synthesis and structures of heterobimetallic Ir2M (M=Pd, Pt) sulfido clusters and their catalytic activity for regioselective addition of alcohols to internal 1-aryl-1-alkynes

The heterobimetallic trinuclear sulfido clusters [(Cp*Ir)₂(μ₃-S)₂MCl₂] (M=Pd (3), Pt (4); Cp*=η⁵-C₅Me₅) were synthesized from the dinuclear hydrogensulfido complex [Cp*IrCl(μ-SH)₂IrCp*Cl] (2) and [MCl₂(COD)] (COD=cycloocta-1,5-diene), while the reaction of 2 with [Pd(PPh₃)₄] afforded the cationic trinuclear cluster [(Cp*Ir)₂(μ₃-S)₂PdCl(PPh₃)]Cl (5). Clusters 3 and 4 reacted with PPh₃ to give a series of mono and dicationic clusters including 5, while the dicationic clusters [(Cp*Ir)₂(μ₃-S)₂M(dppe)][BPh₄]₂ (M=Pd (9), Pt (10); DPPE=Ph₂PCH₂CH₂PPh₂) were obtained by the reaction with dppe followed by anion metathesis. The molecular structures of 5·CH₂Cl₂, 9·CH₃COCH₃, and 10·CH₃COCH₃ were determined by X-ray crystallography. Clusters 3 and 4 were found to catalyze the addition of alcohols to alkynes to give the corresponding acetals. Internal 1-aryl-1-alkynes were transformed by cluster 3 into the corresponding 2,2-dialkoxy-1-arylalkanes with high regioselectivity up to 99:1, while cluster 4 was a much less regioselective catalyst.     

Diastereoselective synthesis of a resolved secondary arsine complex: asymmetric synthesis of (R-(−)589-ethylmethylphenylarsine

The reaction of [R-(R,R)]-(+)₅₈₉-[(η⁵-C₅H₅){1,2-C₆H₄(PMePh)₂}Fe(NCMe)]PF₆ with (±)-AsHMePh in boiling methanol yields crystalline [R-[(R)-(R,R)]-(+)_{589)-[(η⁵-C5H5){1,2-C6H4(PMePh)2}Fe(AsHMePH)}PF₆, optically pure, in ca. 90% yield, in a typical second-order asymmetric transformation. This complex contains the first resolved secondary arsine. Deprotonation of the secondary arsine complex with KOBu^t at −65°C gives the diastereomerically pure tertiary arsenido-iron complex [R-[(R),(R,R)]]-[((η⁵-C₅H₅){1,2-C₆H₄(PMePh)₂}FeAsMePh] · thf, from which optically pure [R-[(S),(R,R)]]-(+)₅₈₉-[(η⁵-C₅H₅){1,2-C₆H₄(PMePh)₂}Fe(AsEtMePh)PF₆ is obtained by reaction with iodoethane. Cyanide displaces (R)-(−)₅₈₉-ethylmethylphenylarsine from the iron complex, thereby effecting the asymmetric synthesis of a tertiary arsine, chiral at arsenic, from (±)-methylphenylarsine and an optically active transition metal auxiliary.